613034216921

更新时间:2024-11-11 11:12:26
品牌:WURTH
描述:WR-PHD 2.54 mm Dual Socket Header Bottom Entry Large

613034216921 概述

WR-PHD 2.54 mm Dual Socket Header Bottom Entry Large

613034216921 数据手册

通过下载613034216921数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
Dimensions: [mm]  
Recommended Hole Pattern: [mm]  
1
pl ±0,10  
2,54 ±0,05  
End  
End  
2
0,80 ±0,15  
2,54 ±0,10  
2
L ±0,30  
1
7,62 ±0,15  
Pl ±0,20  
Pattern Properties:  
Properties  
Value  
40.64  
Unit  
pl  
Pin to Pin (Middle)  
mm  
CHECKED  
REVISION  
DATE (YYYY-MM-DD)  
GENERAL TOLERANCE  
PROJECTION  
METHOD  
Article Properties:  
CPo  
001.003  
2021-06-18  
DIN ISO 2768-1m  
Properties  
Value  
34  
Unit  
DESCRIPTION  
Pins  
WR-PHD Dual Socket Header  
Bottom Entry Large  
Pl  
L
Pin to Pin (Middle)  
Length  
40.64  
43.68  
mm  
mm  
Würth Elektronik eiSos GmbH & Co. KG  
EMC & Inductive Solutions  
Max-Eyth-Str. 1  
74638 Waldenburg  
Germany  
Tel. +49 (0) 79 42 945 - 0  
www.we-online.com  
eiSos@we-online.com  
ORDER CODE  
613034216921  
SIZE/TYPE  
BUSINESS UNIT  
STATUS  
PAGE  
2.54 mm  
eiCan  
Valid  
1/5  
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH  
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety  
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.  
Kind Properties:  
Properties  
Value  
2.54  
Unit  
Pitch  
P
mm  
Durability  
25 Mating cycles  
Material Properties:  
Insulator Material  
Insulator Flammability Rating  
Insulator Color  
Nylon 9T  
UL94 V-0  
Black  
Contact Material  
Contact Plating  
Copper Alloy  
Gold  
Contact Type  
Stamped  
General Information:  
Operating Temperature  
-40 up to +105 °C  
Electrical Properties:  
Properties  
Test conditions  
Value  
3
Unit Tol.  
A
IR  
Rated Current  
Working Voltage  
Withstanding Voltage  
Contact Resistance  
Insulation Resistance  
250  
500  
20  
V (AC)  
1 min  
V (AC)  
R
mΩ max.  
MΩ min.  
RISO  
1000  
Certification:  
RoHS Approval  
REACh Approval  
UL Approval  
Compliant [2011/65/EU&2015/863]  
Conform or declared [(EC)1907/2006]  
E323964  
CHECKED  
REVISION  
DATE (YYYY-MM-DD)  
GENERAL TOLERANCE  
PROJECTION  
METHOD  
CPo  
001.003  
2021-06-18  
DIN ISO 2768-1m  
DESCRIPTION  
WR-PHD Dual Socket Header  
Bottom Entry Large  
Würth Elektronik eiSos GmbH & Co. KG  
EMC & Inductive Solutions  
Max-Eyth-Str. 1  
74638 Waldenburg  
Germany  
Tel. +49 (0) 79 42 945 - 0  
www.we-online.com  
eiSos@we-online.com  
ORDER CODE  
613034216921  
SIZE/TYPE  
BUSINESS UNIT  
STATUS  
PAGE  
2.54 mm  
eiCan  
Valid  
2/5  
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH  
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety  
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.  
Classification Wave Soldering Profile:  
Classification Wave Soldering Profile:  
Profile Feature  
Pb-Free Assembly  
Sn-Pb Assembly  
100 °C  
t
p
Ts min  
Ts typical  
Ts max  
ts  
Preheat Temperature Min  
Preheat Temperature Typical  
Preheat Temperature Max  
Preheat Time ts from Ts min to Ts max  
100 °C  
120 °C  
120 °C  
T
p
First Wave  
Second Wave  
130 °C  
130 °C  
70 seconds  
150 °C max.  
250 °C - 260 °C  
70 seconds  
150 °C max.  
235 °C - 260 °C  
Ramp-up Rate  
Δ T  
Tp  
Peak Temperature  
max. 10 seconds  
max. 5 seconds each wave  
max. 10 seconds  
max. 5 seconds each wave  
tp  
Time of actual peak temperature  
Ramp-down Rate, Min  
Ramp-down Rate, Typical  
Ramp-down Rate, Max  
Time 25 °C to 25 °C  
~ 2 K/ second  
~ 3.5 K/ second  
~ 5 K/ second  
4 minutes  
~ 2 K/ second  
~ 3.5 K/ second  
~ 5 K/ second  
4 minutes  
T
T
s max  
s typical  
T
s min  
refer to EN61760-1:2006  
Preheat area  
Cool down area  
Time  
typical temperature procedure  
min temperature procedure  
max temperature procedure  
CHECKED  
REVISION  
DATE (YYYY-MM-DD)  
GENERAL TOLERANCE  
PROJECTION  
METHOD  
CPo  
001.003  
2021-06-18  
DIN ISO 2768-1m  
DESCRIPTION  
WR-PHD Dual Socket Header  
Bottom Entry Large  
Würth Elektronik eiSos GmbH & Co. KG  
EMC & Inductive Solutions  
Max-Eyth-Str. 1  
74638 Waldenburg  
Germany  
Tel. +49 (0) 79 42 945 - 0  
www.we-online.com  
eiSos@we-online.com  
ORDER CODE  
613034216921  
SIZE/TYPE  
BUSINESS UNIT  
STATUS  
PAGE  
2.54 mm  
eiCan  
Valid  
3/5  
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH  
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety  
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.  
Potting and Coating:  
Cautions and Warnings:  
If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking  
could lead to an incomplete seal, allowing contaminants into the components. Expansion could damage the components. We  
recommend a manual inspection after potting or coating to avoid these effects.  
The following conditions apply to all goods within the product series of the Connectors of  
Würth Elektronik eiSos GmbH & Co. KG:  
Storage Conditions:  
General:  
A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer  
degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of  
shipment.  
Do not expose the components to direct sunlight.  
The storage conditions in the original packaging are defined according to DIN EN 61760-2.  
The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components.  
This mechanical component is designed and manufactured for use in general electronic equipment.  
Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any  
equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control,  
ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are  
especially required and/or if there is the possibility of direct damage or human injury.  
Mechanical components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer.  
The mechanical component is designed and manufactured to be used within the datasheet specified values. If the usage and operation  
conditions specified in the datasheet are not met, the component may be damaged or dissolved.  
Do not drop or impact the components, the component may be damaged.  
Prevent any damage or scratches on the component, especially on the actuator.  
Direct mechanical impact to the product shall be prevented (e.g overlapping of the PCB´s).  
Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth  
Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and  
sustainability over time.  
Packaging:  
The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is  
lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured.  
Handling:  
The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the  
authority of the customer. All technical specifications for standard products do also apply to customer specific products.  
The mechanical component is designed to be used along with Würth Elektronik counterparts and tools. Würth Elektronik cannot ensure  
the reliability of these components while being used with other products.  
Do not repeatedly operate the component with excessive force. It may damage or deform the component resulting in malfunction.  
In the case a product requires particular handling precautions, in addition to the general recommendations mentioned here before, these  
will appear on the product datasheet.  
The temperature rise of the component must be taken into consideration. The operating temperature is comprised of ambient  
temperature and temperature rise of the component.The operating temperature of the component shall not exceed the maximum  
temperature specified.  
Product Specific:  
Soldering:  
These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable.  
However, no responsibility is assumed for inaccuracies or incompleteness.  
The solder profile must comply with the technical product specifications. All other profiles will void the warranty.  
All other soldering methods are at the customers’ own risk.  
Cleaning and Washing:  
Washing agents used during the production to clean the customer application might damage or change the characteristics of the  
component, body, pins and termination. Washing agents may have a negative effect on the long-term functionality of the product.  
Using a brush during the cleaning process may deform function relevant areas. Therefore, we do not recommend using a brush during  
the PCB cleaning process.  
CHECKED  
REVISION  
DATE (YYYY-MM-DD)  
GENERAL TOLERANCE  
PROJECTION  
METHOD  
CPo  
001.003  
2021-06-18  
DIN ISO 2768-1m  
DESCRIPTION  
WR-PHD Dual Socket Header  
Bottom Entry Large  
Würth Elektronik eiSos GmbH & Co. KG  
EMC & Inductive Solutions  
Max-Eyth-Str. 1  
74638 Waldenburg  
Germany  
Tel. +49 (0) 79 42 945 - 0  
www.we-online.com  
eiSos@we-online.com  
ORDER CODE  
613034216921  
SIZE/TYPE  
BUSINESS UNIT  
STATUS  
PAGE  
2.54 mm  
eiCan  
Valid  
4/5  
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH  
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety  
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.  
6. Product Life Cycle  
Important Notes  
Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a  
standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage  
about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be  
available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product  
availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not  
apply in the case of individual agreements deviating from the foregoing for customer-specific products.  
The following conditions apply to all goods within the product range of Würth Elektronik  
eiSos GmbH & Co. KG:  
1. General Customer Responsibility  
Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain  
application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the  
areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The  
responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this  
fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product  
characteristics described in the product specification is valid and suitable for the respective customer application or not.  
7. Property Rights  
All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as  
well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth  
Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or  
implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination,  
application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.  
2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications  
8. General Terms and Conditions  
It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime  
cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.  
In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or  
failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable  
design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic  
component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be  
downloaded at www.we-online.com.  
Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth  
Elektronik eiSos Group, last version available at www.we-online.com.  
3. Best Care and Attention  
Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.  
4. Customer Support for Product Specifications  
Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve  
specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales  
person in charge should be contacted who will be happy to support in this matter.  
5. Product R&D  
Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the  
Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries  
regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the  
customer as per Section 1 and 2 remains unaffected.  
CHECKED  
REVISION  
DATE (YYYY-MM-DD)  
GENERAL TOLERANCE  
PROJECTION  
METHOD  
CPo  
001.003  
2021-06-18  
DIN ISO 2768-1m  
DESCRIPTION  
WR-PHD Dual Socket Header  
Bottom Entry Large  
Würth Elektronik eiSos GmbH & Co. KG  
EMC & Inductive Solutions  
Max-Eyth-Str. 1  
74638 Waldenburg  
Germany  
Tel. +49 (0) 79 42 945 - 0  
www.we-online.com  
eiSos@we-online.com  
ORDER CODE  
613034216921  
SIZE/TYPE  
BUSINESS UNIT  
STATUS  
PAGE  
2.54 mm  
eiCan  
Valid  
5/5  
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH  
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety  
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.  

613034216921 相关器件

型号 制造商 描述 价格 文档
61303421821 WURTH WR-PHD 2.54 mm Dual Socket Header 获取价格
613034243121 WURTH WR-PHD 2.54 mm Angled Dual Socket Header 获取价格
61303425721 WURTH WR-PHD 2.54 mm Dual Socket Header Bottom Entry 获取价格
61303511021 WURTH 2.54MM ANGLED PIN HEADER 获取价格
61303611021 WURTH 2.54MM ANGLED PIN HEADER 获取价格
61303611121 WURTH WR-PHD 2.54 mm THT Pin Header 获取价格
61303611821 WURTH WR-PHD 2.54 mm Socket Header 获取价格
61303621021 WURTH WR-PHD 2.54 mm THT Angled Dual Pin Header 获取价格
61303621121 WURTH 2.54MM DUAL PIN HEADER 获取价格
61303621821 WURTH WR-PHD 2.54 mm Dual Socket Header 获取价格

613034216921 相关文章

  • ADI收购eFPGA公司,可重构芯片引领FPGA发展新风向
    2024-11-13
    4
  • LG Display震撼发布:全球首款50%伸缩率柔性显示屏原型机亮相
    2024-11-13
    7
  • 东京电子(TEL)财报预测:净利润激增45%,中国市场占比显著增至45%
    2024-11-13
    8
  • Nordic Semiconductor 宣布裁员并取消收购 Novelda,UWB技术前景生变
    2024-11-13
    6