SYNC-10.00MHz [ABRACON]

Portable Precision Frequency Reference;


型号：	SYNC-10.00MHz
厂家：	ABRACON
描述：	Portable Precision Frequency Reference
文件：	总2页 (文件大小：2423K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Sync'n Go^®-- Portable Precision Frequency Reference

SYNC-10.00MHz.

RoHS

Compliant

FEATURES:

APPLICATIONS:

• Stand Alone 10.00MHz Portable Precision Frequency Reference

• Ideally suited as an in-field Calibrated Precision 10.00MHz reference

- World Wide Capability

for trouble shooting or tuning hardware and Base Station related

• Built-in Stratum-III stability, 10.00MHz Signal tuned into 50Ω's • Synchronization equipment

circuitry providing dynamic sync capability, enabling Calibration to a known

source such as; a GPS Tracked 10.00MHz reference/10.00MHz Rubidium

Source/10.00MHz OCXO based reference

• Reference source for lab use

• Reference source to drive frequency counters and other timing related

hardware or instruments

• Integrated re-chargeable batteries to provide true stand-alone capability in the field • Precision Portable reference for inspection of in-field wireless

• Once sync'd; guaranteed ±300 ppb stability over 0ºC to 60ºC

• Pocket Size - 3.50" * 1.50" * 1.00"; machined aluminum durable enclosure

• Accompanied with a Universal AC-DC Charger

transmitters

• Continuously operable at full charge for 10-hours

STANDARD SPECIFICATIONS:

Parameter

Input Reference Frequency for Sync

Output Reference Frequency

Operable Operating Range

Synchronization accuracy

Frequency Drift post sync

(25ºC ± 10ºC)

Description

Value / Units

MHz

10.00

0ºC to +60ºC

±5.00

MHz

ppb

ppb Typical

±25.00

Frequency Drift post sync

(25ºC ± 20ºC)

±50.00

ppb Typical

Frequency Accuracy Over the

operating Temperature Range

Load Impedance

< ±100

±300

ppb Typical; Post Sync

ppb Maximum; Post Sync

Ω

Charging Time

Stand Alone operational time with

full charge

4.00

10.00

Hours maximum

Hours minimum

Phase Noise @ 10.00MHz Carrier

100

1,000

10,000

100,000

1,000,000

Hz offset

-120

-140

-150

-155

dBc/Hz typical

Output amplitude

ALL Harmonics

rms jitter

6.0

-30

< 0.50 ps

dBm minimum

dBc maximum

12kHz to 20MHz BW from the carrier

PACKAGE OUTLINE

Visit www.abracon.com ^{for Terms & Conditions of Sale}Revised: 10.02.11

30332 Esperanza, Rancho Santa Margarita, California92688

tel 949-546-8000 | fax 949-546-8001 | www.abracon.com

ABRACON IS

ISO9001:2008

CERTIFIED

Sync'n Go^®-- Portable Precision Frequency Reference

SYNC-10.00MHz.

RoHS

Compliant

OPERATIONAL MANUAL

Charge:

1) Plug 5V charger (or PC or any other USB power source) into a mini-USB port

2) "Bat" LED may turn yellow for a moment to signal that an internal battery is evaluated

3) "Bat" LED will flash green to signal that the battery is being charged

4) "Bat" LED will display solid green when the battery is fully charged

Synchronization:

1) Connect a 10MHz standard to the "Ref In" input

2) Press "Synchronize"

3) "Lock" LED will turn-on yellow to signal that "Sync N Go" is evaluating the standard

4) If the reference is stable, the "Lock" LED will turn green to signal that the signal is

locked and that the reference information is stored

5) If the reference is not found or it is outside a frequency range or it is not stable, the

"Lock" LED will flash red

6) If that occurs, the "Lock" LED turns-off and the "Sync N Go" goes into a sleep mode

Output ON (if battery charged):

1) Press "Power"

2) "ON" LED will turn green

3) "Sync N Go" will output a continuous RF signal on the "Out" connector

Output ON (if battery low):

1) Press "Power"

2) "ON" LED will turn green.

3) "Sync N Go" will output a continuous RF signal on the "Out" connector. At the same

time, "Bat" LED will slowly flash red.

Output ON (if battery is discharged):

1) Press "Power"

2) "Bat" LED will rapidly flash red for few seconds and "Sync N Go" will immediately go

back to sleep

Output OFF:

1) Press "Power"

2) "ON" LED turns off and the "Sync N Go" goes into a sleep mode

ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications.

Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component

failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from

Abracon Corporation is required. Please contact Abracon Corporation for more information.

Designed & Manufactured in United States

For technical assistance, please contact: techsupport@abracon.com

Visit www.abracon.com ^{for Terms & Conditions of Sale}Revised: 10.02.11

30332 Esperanza, Rancho Santa Margarita, California92688

tel 949-546-8000 | fax 949-546-8001 | www.abracon.com

ABRACON IS

ISO9001:2008

CERTIFIED

SYNC-10.00MHz [ABRACON]

相关型号：

SYNC-10MHZ

SYNC-POWER

SYNCHRONOUS

SYNCMASTER170MP(ML17NS/ML17AS)

SYNCMASTER170T_180T

SYNCMASTER700P/CSH7839L

SYNCMASTER753DF(DF17K*)

SYNCMASTER755DF(DF17J*)

SYNCMASTER900P/CSH9839L

SYNCPOWE

SYP-02T-1

SYP-02TV-1