AD536ASE/883B [ADI]
Integrated Circuit True RMS-to-DC Converter; 集成电路真RMS至DC转换器型号: | AD536ASE/883B |
厂家: | ADI |
描述: | Integrated Circuit True RMS-to-DC Converter |
文件: | 总17页 (文件大小:558K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Integrated Circuit
True RMS-to-DC Converter
AD536A
Data Sheet
FEATURES
FUNCTIONAL BLOCK DIAGRAM
AD536A
True rms-to-dc conversion
Laser trimmed to high accuracy
0.2% maximum error (AD536AK)
0.5% maximum error (AD536AJ)
Wide response capability
Computes rms of ac and dc signals
450 kHz bandwidth: V rms > 100 mV
2 MHz bandwidth: V rms > 1 V
Signal crest factor of 7 for 1% error
dB output with 60 dB range
ABSOLUTE
VALUE
V
IN
dB
SQUARER/
DIVIDER
COM
+
+V
S
C
AV
CURRENT
MIRROR
25kΩ
R
L
Low power: 1.2 mA quiescent current
Single- or dual-supply operation
Monolithic integrated circuit
I
OUT
BUFFER IN
−55°C to +125°C operation (AD536AS)
BUF
25kΩ
BUFFER
OUT
GENERAL DESCRIPTION
80kΩ
–V
The AD536A is a complete monolithic integrated circuit that
performs true rms-to-dc conversion. It offers performance
comparable or superior to that of hybrid or modular units costing
much more. The AD536A directly computes the true rms value of
any complex input waveform containing ac and dc components.
A crest factor compensation scheme allows measurements with 1%
error at crest factors up to 7. The wide bandwidth of the device
extends the measurement capability to 300 kHz with less than 3 dB
errors for signal levels greater than 100 m V.
S
Figure 1.
The AD536A is available in two accuracy grades (J and K) for
commercial temperature range (0°C to 70°C) applications, and
one grade (S) rated for the −55°C to +125°C extended range.
The AD536AK offers a maximum total error of 2 mV 0.2%
of reading, while the AD536AJ and AD536AS have maximum
errors of 5 mV 0.5% of reading. All three versions are available
in a hermetically sealed 14-lead DIP or a 10-pin TO-100 metal
header package. The AD536AS is also available in a 20-terminal
leadless hermetically sealed ceramic chip carrier.
An important feature of the AD536A, not previously available
in rms converters, is an auxiliary dB output pin. The logarithm
of the rms output signal is brought out to a separate pin to allow
the dB conversion, with a useful dynamic range of 60 dB. Using
an externally supplied reference current, the 0 dB level can be
conveniently set to correspond to any input level from 0.1 V to
2 V rms.
The AD536A computes the true root-mean-square level of a
complex ac (or ac plus dc) input signal and provides an equiva-
lent dc output level. The true rms value of a waveform is a more
useful quantity than the average rectified value because it relates
directly to the power of the signal. The rms value of a statistical
signal also relates to its standard deviation.
The AD536A is laser trimmed to minimize input and output offset
voltage, to optimize positive and negative waveform symmetry
(dc reversal error), and to provide full-scale accuracy at 7 V rms.
As a result, no external trims are required to achieve the rated
unit accuracy.
An external capacitor is required to perform measurements to the
fully specified accuracy. The value of this capacitor determines the
low frequency ac accuracy, ripple amplitude, and settling time.
The input and output pins are fully protected. The input circuitry
can take overload voltages well beyond the supply levels. Loss of
supply voltage with the input connected to external circuitry does
not cause the device to fail. The output is short-circuit protected.
The AD536A operates equally well from split supplies or a
single supply with total supply levels from 5 V to 36 V. With
1 mA quiescent supply current, the device is well suited for a
wide variety of remote controllers and battery-powered
instruments.
Rev. E
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©1976–2012 Analog Devices, Inc. All rights reserved.
IMPORTANT LINKS for the AD536A*
Last content update 09/07/2013 04:37 pm
PARAMETRIC SELECTION TABLES
DESIGN COLLABORATION COMMUNITY
Find Similar Products By Operating Parameters
Collaborate Online with the ADI support team and other designers
about select ADI products.
DOCUMENTATION
Follow us on Twitter: www.twitter.com/ADI_News
Like us on Facebook: www.facebook.com/AnalogDevicesInc
AD536A Military Data Sheet
AN-653: Improving Temperature, Stability, and Linearity of High
Dynamic Range RMS RF Power Detectors
AN-214: Ground Rules for High Speed Circuits
AN-268: RMS-to-DC Converters Ease Measurement Tasks
RMS-to-DC Application Guide Second Edition
DESIGN SUPPORT
Submit your support request here:
Linear and Data Converters
Embedded Processing and DSP
* Section I: RMS-DC Conversion - Theory
* Section II: RMS-DC Conversion - Basic Design Considerations
* Section III: RMS Application Circuits
Telephone our Customer Interaction Centers toll free:
Americas:
Europe:
China:
1-800-262-5643
00800-266-822-82
4006-100-006
1800-419-0108
8-800-555-45-90
* Appendix A: Testing the Critical Parameters of RMS Converters
* Appendix B: Input Buffer Amplifier Requirements
India:
* Appendix C: Computer Programs for Determining Computational
Errors, Output Ripple, and 1% Settling Time of RMS Converter
Russia:
Quality and Reliability
Lead(Pb)-Free Data
* Appendix D: New Products Appendix to the RMS-to-DC Conversion
Application Guide (October 2002)
* Download the entire guide in .zip format
Introduction to Analog RMS-to-DC Technology: Converters and
Applications Audio Version
SAMPLE & BUY
AD536A
Introduction to Analog RMS-to-DC Technology: Converters and
Applications Non-Audio Version
ADI Warns Against Misuse of COTS Integrated Circuits
Space Qualified Parts List
View Price & Packaging
Request Evaluation Board
Request Samples
Check Inventory & Purchase
Find Local Distributors
DESIGN TOOLS, MODELS, DRIVERS & SOFTWARE
AD536A SPICE Macro Model
EVALUATION KITS & SYMBOLS & FOOTPRINTS
Symbols and Footprints
* This page was dynamically generated by Analog Devices, Inc. and inserted into this data sheet.
Note: Dynamic changes to the content on this page (labeled 'Important Links') does not
constitute a change to the revision number of the product data sheet.
This content may be frequently modified.
AD536A
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Frequency Response .....................................................................9
AC Measurement Accuracy and Crest Factor...........................9
Applications Information .............................................................. 11
Typical Connections .................................................................. 11
Optional External Trims For High Accuracy......................... 11
Single-Supply Operation ........................................................... 12
Choosing the Averaging Time Constant................................. 12
Outline Dimensions....................................................................... 14
Ordering Guide .......................................................................... 15
General Description ......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 5
ESD Caution.................................................................................. 5
Pin Configurations and Function Descriptions ........................... 6
Theory of Operation ........................................................................ 8
Connections for dB Operation ................................................... 8
REVISION HISTORY
7/12—Rev. D to Rev. E
Updated Outline Dimensions....................................................... 14
Changes to Ordering Guide.......................................................... 15
Reorganized Layout............................................................Universal
Changes to Figure 1.......................................................................... 1
Changes to Figure 6.......................................................................... 8
Changes to Figure 7.......................................................................... 9
Changes to Figure 13, Figure 14, and Figure 15 ......................... 11
Changes to Figure 16, Figure 17, and Single-Supply Operation
Section.............................................................................................. 12
Changes to Figure 21...................................................................... 13
Updated Outline Dimensions....................................................... 14
3/06—Rev. B to Rev. C
Updated Format..................................................................Universal
Changed Product Description to General Description................1
Changes to General Description .....................................................1
Changes to Table 1.............................................................................3
Changes to Table 2.............................................................................5
Added Pin Configurations and Function Descriptions ...............6
Changed Standard Connection to Typical Connections .............8
Changed Single Supply Connection to Single Supply
8/08—Rev. C to Rev. D
Changes to Features Section............................................................ 1
Changes to General Description Section ...................................... 1
Changes to Figure 1.......................................................................... 1
Changes to Table 2............................................................................ 5
Change to Figure 2 ........................................................................... 5
Changes to Figure 15...................................................................... 10
Changes to Connections for dB Operation Section................... 11
Changes to Figure 17...................................................................... 12
Changes to Frequency Response Section .................................... 12
Operation............................................................................................9
Changes to Connections for dB Operation................................. 11
Changes to Figure 17...................................................................... 12
Updated Outline Dimensions....................................................... 14
Changes to Ordering Guide.......................................................... 15
6/99—Rev. A to Rev. B
1/76—Revision 0: Initial Version
Rev. E | Page 2 of 16
Data Sheet
AD536A
SPECIFICATIONS
TA = +25°C and 15 V dc, unless otherwise noted.
Table 1.
AD536AJ
AD536AK
Typ
AD536AS
Typ Max
VOUT = √Avg(VIN)2
Parameter
Min
Typ
VOUT = √Avg(VIN)2
Max
Min
Max
Min
Unit
TRANSFER FUNCTION
VOUT = √Avg(VIN)2
CONVERSION ACCURACY
Total Error, Internal Trim1
(See Figure 13)
5
0.5
2
0.2
5
0.5
mV % of rdg
vs. Temperature
TMIN to +70°C
0.1 0.01
0.05 0.005
0.1 0.005
0.3 0.005
mV % of rdg/°C
mV % of rdg/°C
mV % of rdg/°C
+70°C to +125°C
vs. Supply Voltage
0.1
0.01
0.2
3
0.1 0.01
0.1
0.1
0.01
0.2
3 0.3
dc Reversal Error
Total Error, External Trim1
(See Figure 16)
mV % of rdg
mV % of rdg
0.3
2
0.1
ERROR VS. CREST FACTOR2
Crest Factor 1 to Crest Factor 2
Crest Factor = 3
Crest Factor = 7
FREQUENCY RESPONSE3
Specified accuracy
Specified accuracy
Specified accuracy
−0.1
−1.0
−0.1
−1.0
−0.1
−1.0
% of rdg
% of rdg
Bandwidth for 1% Additional
Error (0.09 dB)
VIN = 10 mV
VIN = 100 mV
VIN = 1 V
5
45
120
5
45
120
5
45
120
kHz
kHz
kHz
3 dB Bandwidth
VIN = 10 mV
VIN = 100 mV
VIN = 1 V
90
90
90
kHz
450
2.3
25
450
2.3
25
450
2.3
25
kHz
MHz
ms/µF
AVERAGING TIME CONSTANT
(See Figure 19)
INPUT CHARACTERISTICS
Signal Range, 15 V Supplies
Continuous RMS Level
Peak Transient Input
Continuous RMS Level,
VS = 5 V
0 to 7
0 to 2
0 to 7
0 to 2
0 to 7
20
0 to 2
V rms
V peak
V rms
20
20
Peak Transient Input,
VS = 5 V
Maximum Continuous
Nondestructive Input Level
(All Supply Voltages)
7
7
7
V peak
V peak
25
25
25
Input Resistance
Input Offset Voltage
OUTPUT CHARACTERISTICS
13.33
16.67
0.8
20
2
13.33
16.67
0.5
20
1
13.33
16.67
0.8
20
2
kΩ
mV
Offset Voltage, VIN = COM
(See Figure 13)
1
2
0.5
1
2
mV
vs. Temperature
vs. Supply Voltage
Voltage Swing, 15 V Supplies
5 V Supply
0.1
0.1
0.1
0.1
+12.5
0.2
mV/°C
mV/V
V
0.2
0 to +11 +12.5
0 to +2
0 to +11
0 to +2
0 to +11 +12.5
0 to +2
V
dB OUTPUT, 0 dB = 1 V rms
(See Figure 7)
Error, 7 mV < VIN < 7 V rms
Scale Factor
Scale Factor Temperature
Coefficient
0.4
−3
−0.033
0.6
0.2
−3
−0.033
0.3
0.5
−3
−0.033
0.6
dB
mV/dB
dB/°C
Uncompensated
IREF for 0 dB = 1 V rms
IREF Range
+0.33
20
+0.33
20
+0.33
20
% of rdg/°C
µA
µA
5
1
80
100
5
1
80
100
5
1
80
100
Rev. E | Page 3 of 16
AD536A
Data Sheet
AD536AJ
Typ
AD536AK
Typ
AD536AS
Typ Max
Parameter
Min
Max
Min
Max
Min
Unit
IOUT TERMINAL
IOUT Scale Factor
40
10
25
40
10
25
40
10
25
µA/V rms
IOUT Scale Factor Tolerance
Output Resistance
Voltage Compliance
20
30
20
30
20
30
%
kΩ
V
20
20
20
−VS to
−VS to
−VS to
(+VS − 2.5 V)
(+VS − 2.5 V)
(+VS − 2.5 V)
BUFFER AMPLIFIER
Input and Output Voltage
Range
−VS to
(+VS − 2.5V)
−VS to
(+VS − 2.5V)
−VS to
(+VS − 2.5V)
V
Input Offset Voltage, RS = 25 kΩ
Input Bias Current
0.5
20
108
4
60
0.5
20
108
4
60
0.5
20
108
4
60
mV
nA
Ω
Input Resistance
Output Current
(+5 mA,
(+5 mA,
(+5 mA,
−130 µA)
−130 µA)
−130 µA)
Short-Circuit Current
Output Resistance
Small-Signal Bandwidth
Slew Rate4
20
20
20
mA
Ω
MHz
V/µs
0.5
0.5
0.5
1
5
1
5
1
5
POWER SUPPLY
Voltage Rated Performance
Dual Supply
Single Supply
15
1.2
65
15
1.2
65
15
1.2
65
V
V
V
3.0
+5
18
+36
3.0
+5
18
+36
3.0
+5
18
+36
Quiescent Current
Total VS, 5 V to 36 V, TMIN to TMAX
TEMPERATURE RANGE
Rated Performance
Storage
2
2
2
mA
0
−55
+70
+150
0
−55
+70
+150
−55
−55
+125
+150
°C
°C
NUMBER OF TRANSISTORS
1 Accuracy is specified for 0 V to 7 V rms, dc or 1 kHz sine wave input with the AD536A connected as in the figure referenced.
2 Error vs. crest factor is specified as an additional error for 1 V rms rectangular pulse input, pulse width = 200 μs.
3 Input voltages are expressed in volts rms, and error is expressed as a percentage of the reading.
4 With 2kΩ external pull-down resistor.
Rev. E | Page 4 of 16
Data Sheet
AD536A
ABSOLUTE MAXIMUM RATINGS
Table 2.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Parameter
Rating
Supply Voltage
Dual Supply
Single Supply
18 V
+36 V
Internal Power Dissipation
Maximum Input Voltage
Buffer Maximum Input Voltage
Maximum Input Voltage
Storage Temperature Range
Operating Temperature Range
AD536AJ/AD536AK
AD536AS
500 mW
25 V peak
VS
25 V peak
−55°C to +150°C
ESD CAUTION
0°C to +70°C
−55°C to +125°C
300°C
Lead Temperature (Soldering, 60 sec)
ESD Rating
Thermal Resistance θJA
1000 V
1
10-Pin Header (H-10 Package)
20-Terminal LCC (E-20 Package)
14-Lead SBDIP (D-14 Package)
14-Lead CERDIP (Q-14 Package)
150°C/W
95°C/W
95°C/W
95°C/W
1 θJA is specified for the worst-case conditions, that is, a device soldered in a
circuit board for surface-mount packages.
0.1315 (3.340)
+V
14
COM
10
R
L
9
S
I
OUT
8
0.0807
(2.050)
V
1A
IN
1
BUF IN
7
V
1B
IN
1
–V
3
C
4
dB
5
BUF OUT
6
S
AV
PAD NUMBERS CORRESPOND TO PIN NUMBERS FOR THE
TO-100 14-LEAD CERAMIC DIP PACKAGE.
1
BOTH PADS SHOWN MUST BE CONNECTED TO V
.
IN
THE AD536A IS AVAILABLE IN LASER-TRIMMED CHIP FORM.
SUBSTRATE CONNECTED TO –V
.
S
Figure 2. Die Dimensions and Pad Layout
Dimensions shown in inches and (millimeters)
Rev. E | Page 5 of 16
AD536A
Data Sheet
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
V
1
2
3
4
5
6
7
14 +V
S
IN
NC
13 NC
12 NC
11 NC
10 COM
–V
S
AD536A
C
TOP VIEW
AV
(Not to Scale)
dB
BUF OUT
BUF IN
9
8
R
L
I
OUT
NC = NO CONNECT
Figure 3. D-14 and Q-14 Packages Pin Configuration
Table 3. D-14 and Q-14 Packages Pin Function Descriptions
Pin No.
Mnemonic
Description
1
VIN
Input Voltage
2
NC
No Connection
3
4
5
6
7
8
9
−VS
CAV
dB
BUF OUT
BUF IN
IOUT
Negative Supply Voltage
Averaging Capacitor
Log (dB) Value of the RMS Output Voltage
Buffer Output
Buffer Input
RMS Output Current
Load Resistor
RL
10
11
12
13
14
COM
NC
NC
NC
+VS
Common
No Connection
No Connection
No Connection
Positive Supply Voltage
I
OUT
10
R
BUF IN
L
1
9
COM
2
3
8
7
BUF OUT
dB
AD536A
TOP VIEW
(Not to Scale)
+V
S
4
6
5
V
C
AV
IN
–V
S
Figure 4. H-10 Package Pin Configuration
Table 4. H-10 Package Pin Function Descriptions
Pin No.
Mnemonic
Description
1
2
3
4
5
6
7
8
9
10
RL
COM
+VS
VIN
−VS
CAV
dB
BUF OUT
BUF IN
IOUT
Load Resistor
Common
Positive Supply Voltage
Input Voltage
Negative Supply Voltage
Averaging Capacitor
Log (dB) Value of the RMS Output Voltage
Buffer Output
Buffer Input
RMS Output Current
Rev. E | Page 6 of 16
Data Sheet
AD536A
3
2
1
20 19
–V
4
5
6
7
18
S
NC
AD536A
17 NC
NC
TOP VIEW
C
16
15
NC
NC
AV
NC
dB
(Not to Scale)
14 COM
8
9
10 11 12 13
NC = NO CONNECT
Figure 5. E-20 Package Pin Configuration
Table 5. E-20 Package Pin Function Descriptions
Pin No.
Mnemonic
Description
1
NC
No Connection
2
VIN
Input Voltage
3
NC
No Connection
4
5
−VS
NC
Negative Supply Voltage
No Connection
6
7
CAV
NC
Averaging Capacitor
No Connection
8
9
dB
Log (dB) Value of the RMS Output Voltage
Buffer Output
Buffer Input
No Connection
RMS Output Current
Load Resistor
Common
No Connection
No Connection
No Connection
BUF OUT
BUF IN
NC
IOUT
RL
COM
NC
NC
NC
NC
10
11
12
13
14
15
16
17
18
19
20
No Connection
No Connection
Positive Supply Voltage
NC
+VS
Rev. E | Page 7 of 16
AD536A
Data Sheet
THEORY OF OPERATION
The AD536A embodies an implicit solution of the rms equation
that overcomes the dynamic range as well as other limitations
inherent in a straightforward computation of rms. The actual
computation performed by the AD536A follows the equation
The current mirror also produces the output current, IOUT, which
equals 2I4. IOUT can be used directly or can be converted to a
voltage with R2 and buffered by A4 to provide a low impedance
voltage output. The transfer function of the AD536A results in
the following:
2
VIN
V rms = Avg
VOUT = 2R2 × I rms = VIN rms
V rms
The dB output is derived from the emitter of Q3 because the
voltage at this point is proportional to –log VIN. The emitter
follower, Q5, buffers and level shifts this voltage so that the dB
output voltage is zero when the externally supplied emitter
current (IREF) to Q5 approximates I3.
Figure 6 is a simplified schematic of the AD536A. Note that it is
subdivided into four major sections: absolute value circuit
(active rectifier), squarer/divider, current mirror, and buffer
amplifier. The input voltage (VIN), which can be ac or dc, is
converted to a unipolar current (I1) by the active rectifiers
(A1, A2). I1 drives one input of the squarer/divider, which has
the transfer function
CONNECTIONS FOR dB OPERATION
The logarithmic (or decibel) output of the AD536A is one of
its most powerful features. The internal circuit computing dB
works accurately over a 60 dB range. The connections for dB
measurements are shown in Figure 7.
I4 = II2/I3
The output current, I4, of the squarer/divider drives the current
mirror through a low-pass filter formed by R1 and the exter-
nally connected capacitor, CAV. If the R1 CAV time constant is
much greater than the longest period of the input signal, then
I4 is effectively averaged. The current mirror returns a current
I3, which equals Avg[I4], back to the squarer/divider to complete
the implicit rms computation. Thus,
Select the 0 dB level by adjusting R1 for the proper 0 dB reference
current (which is set to cancel the log output current from the
squarer/divider at the desired 0 dB point). The external op amp
provides a more convenient scale and allows compensation of
the +0.33%/°C scale factor drift of the dB output pin.
The temperature-compensating resistor, R2, is available online
in several styles from Precision Resistor Company, Inc., (Part
Number AT35 and Part Number ST35). The average temperature
coefficients of R2 and R3 result in the +3300 ppm required to
compensate for the dB output. The linear rms output is available
at Pin 8 on the DIP or Pin 10 on the header device with an output
impedance of 25 kΩ. Some applications require an additional
buffer amplifier if this output is desired.
I4 = Avg[II2/I4] = II rms
CURRENT MIRROR
14
+V
S
10
COM
R1
0.4mA
FS
25kΩ
0.2mA
FS
I
3
ABSOLUTE VALUE;
VOLTAGE-CURRENT
CONVERTER
4
8
9
R2
25kΩ
A3
I
R
OUT
L
I
2
I
1
5
For dB calibration,
BUF
Q1
R4
50kΩ
dB
OUT
IN
BUFFER
–1
|V |R
IN
Q3
V
IN
7
1. Set VIN = 1.00 V dc or 1.00 V rms.
2. Adjust R1 for dB output = 0.00 V.
3. Set VIN = +0.1 V dc or 0.10 V rms.
4. Adjust R5 for dB output = −2.00 V.
A4
1
Q5
Q2
A1
Q4
6
A2
25kΩ
80kΩ
12kΩ
BUF
OUT
ONE-QUADRANT
SQUARER/DIVIDER
R3
25kΩ
12kΩ
3
–V
Any other desired 0 dB reference level can be used by setting
NOTES
1. PINOUTS ARE FOR 14-LEAD DIP.
S
V
IN and adjusting R1 accordingly. Note that adjusting R5 for the
proper gain automatically provides the correct temperature
compensation.
Figure 6. Simplified Schematic
Rev. E | Page 8 of 16
Data Sheet
AD536A
+V
V
S
IN
+V
ABSOLUTE
VALUE
S
14
13
12
11
10
9
1
2
3
4
5
6
7
4.6V TO 18V
+E
AD536A
NC
NC
NC
E
–V
OUT
SQUARER/
DIVIDER
S
AD580J
–E
–V
+V
S
dB SCALE
C1, C
C2
2.5V
AV
C
AV
FACTOR ADJUST
R4
NC
S
33.2kΩ
COM
R1
500kΩ
dB
CURRENT
MIRROR
+V
R5
5kΩ
S
0.1µF
R
L
BUF OUT
BUF IN
0dB
7
R6
24.9kΩ
dB OUT
3mV/dB
REF
25kΩ
2
ADJUST
BUF
8
R3
60.4Ω
OP77
6
I
OUT
LINEAR
rms
OUTPUT
TEMPERATURE
COMPENSATED
dB OUTPUT
3
4
1
R2
1kΩ
+100mV/dB
–V
S
1
SPECIAL TC COMPENSATION RESISTOR, +3300ppm/°C,
PRECISION RESISTOR COMPANY PART NUMBER AT 35 OR PART NUMBER ST35.
Figure 7. dB Connection
Figure 9 illustrates a curve of reading error for the AD536A for
a 1 V rms input signal with crest factors from 1 to 11. A rectan-
gular pulse train (pulse width = 100 µs) was used for this test
because it is the worst-case waveform for rms measurement (all
of the energy is contained in the peaks). The duty cycle and
peak amplitude were varied to produce crest factors from 1 to
11 while maintaining a constant 1 V rms input amplitude.
T
FREQUENCY RESPONSE
The AD536A utilizes a logarithmic circuit in performing the
implicit rms computation. As with any log circuit, bandwidth
is proportional to signal level. The solid lines in the graph of
Figure 8 represent the frequency response of the AD536A at
input levels from 10 mV rms to 7 V rms. The dashed lines indicate
the upper frequency limits for 1%, 10%, and 3 dB of reading
additional error. For example, note that a 1 V rms signal produces
less than 1% of reading additional error up to 120 kHz. A 10 mV
signal can be measured with 1% of reading additional error
(100 µV) up to only 5 kHz.
ө
O
100µs
T
V
η = DUTY CYCLE =
CF = 1/√η
P
0
ө
(rms) = 1 V rms
IN
100µs
1
10
7V rms INPUT
1V rms INPUT
1%
10%
0
–1
–2
1
±3dB
0.1
100mV rms INPUT
0.01
10mV rms INPUT
10k
–3
–4
1k
100k
1M
10M
FREQUENCY (Hz)
1
2
3
4
5
6
7
8
9
10
11
CREST FACTOR
Figure 8. High Frequency Response
Figure 9. Error vs. Crest Factor
AC MEASUREMENT ACCURACY AND CREST
FACTOR
Crest factor is often overlooked when determining the accuracy
of an ac measurement. The definition of crest factor is the ratio
of the peak signal amplitude to the rms value of the signal
(CF = VP/V rms). Most common waveforms, such as sine and
triangle waves, have relatively low crest factors (<2). Waveforms
that resemble low duty cycle pulse trains, such as those occurring
in switching power supplies and SCR circuits, have high crest
factors. For example, a rectangular pulse train with a 1% duty
cycle has a crest factor of 10 (CF = 1√n).
10
1V rms CF = 10
1V rms CF = 3
1
0.1
1µs
10µs
100µs
1000µs
PULSE WIDTH (µs)
Figure 10. Error vs. Pulse Width Rectangular Pulse
Rev. E | Page 9 of 16
AD536A
Data Sheet
25
20
25
20
15
V
IN
V
IN
15
V
OUT
10
5
10
5
V
OUT
2.5
0
0
5
10
20
30
±6
±10
VOLTS (DUAL SUPPLY)
±16
±18
VOLTS (SINGLE SUPPLY)
Figure 12. Input and Output Voltage Ranges vs.
Single Supply
Figure 11. Input and Output Voltage Ranges vs.
Dual Supply
Rev. E | Page 10 of 16
Data Sheet
AD536A
APPLICATIONS INFORMATION
V
+V
S
C
IN
AV
TYPICAL CONNECTIONS
NC
3
NC
1
NC
20 19
The AD536A is simple to connect to for the majority of high
accuracy rms measurements, requiring only an external capaci-
tor to set the averaging time constant. The standard connection
is shown in Figure 13 through Figure 15. In this configuration,
the AD536A measures the rms of the ac and dc levels present at
the input, but shows an error for low frequency input as a function
of the filter capacitor, CAV, as shown in Figure 19. Thus, if a 4 µF
capacitor is used, the additional average error at 10 Hz is 0.1%;
at 3 Hz, the additional average error is 1%.
2
–V
ABSOLUTE
VALUE
S
–V
4
18
17
16
15
14
S
NC
NC
NC
AD536A
5
6
7
8
NC
SQUARER/
DIVIDER
C
AV
CURRENT
MIRROR
NC
dB
NC
COM
BUF
25kΩ
9
10 11 12
13
V
OUT
The accuracy at higher frequencies is according to specification.
To reject the dc input, add a capacitor in series with the input,
as shown in Figure 17. Note that the capacitor must be nonpolar.
If the AD536A supply rails contain a considerable amount of
high frequency ripple, it is advisable to bypass both supply pins
to ground with 0.1 µF ceramic capacitors, located as close to the
device as possible.
Figure 15. 20-Terminal Standard RMS Connection
The input and output signal ranges are a function of the supply
voltages; these ranges are shown in Figure 11 and Figure 12.
The AD536A can also be used in an unbuffered voltage output
mode by disconnecting the input to the buffer. The output then
appears unbuffered across the 25 kΩ resistor. The buffer ampli-
fier can then be used for other purposes. Further, the AD536A
can be used in a current output mode by disconnecting the
25 kΩ resistor from ground. The output current is available at
Pin 8 (IOUT, Pin 10 on the H-10 package) with a nominal scale of
40 μA per V rms input positive output.
C
AV
AD536A
+V
V
S
IN
ABSOLUTE
V
IN
14
13
12
11
10
9
+V
S
1
2
3
4
5
6
7
VALUE
NC
–V
NC
NC
S
SQUARER/
DIVIDER
–V
S
NC
COM
C
AV
OPTIONAL EXTERNAL TRIMS FOR HIGH
ACCURACY
CURRENT
MIRROR
dB
BUF OUT
V
OUT
R
L
25kΩ
The accuracy and offset voltage of the AD536A is adjustable
with external trims, as shown in Figure 16. R4 trims the offset.
Note that the offset trim circuit adds 365 Ω in series with the
internal 25 kΩ resistor. This causes a 1.5% increase in scale factor,
which is compensated for by R1. The scale factor adjustment
range is 1.5%.
BUF
8
BUF IN
I
OUT
Figure 13. 14-Lead Standard RMS Connection
I
OUT
R
L
BUF IN
BUF OUT
25kΩ
The trimming procedure is as follows:
AD536A
COM
V
BUF
OUT
CURRENT
MIRROR
1. Ground the input signal, VIN, and adjust R4 to provide 0 V
output from Pin 6. Alternatively, adjust R4 to provide the
correct output with the lowest expected value of VIN.
+V
S
SQUARER/
DIVIDER
+V
S
dB
2. Connect the desired full-scale input level to VIN, either dc
or a calibrated ac signal (1 kHz is the optimum frequency).
3. Trim R1 to provide the correct output at Pin 6. For example,
1.000 V dc input provides 1.000 V dc output. A 1.000 V
peak-to-peak sine wave should provide a 0.707 V dc output.
Any residual errors are caused by device nonlinearity.
ABSOLUTE
VALUE
V
IN
C
AV
C
AV
–V
S
Figure 14. 10-Pin Standard RMS Connection
The major advantage of external trimming is to optimize device
performance for a reduced signal range; the AD536A is
internally trimmed for a 7 V rms full-scale range.
Rev. E | Page 11 of 16
AD536A
Data Sheet
C
C
AV
AV
SCALE
FACTOR
ADJUST
C2
1µF
+V
+V
S
S
V
+V
S
IN
ABSOLUTE
VALUE
ABSOLUTE
VALUE
V
V
+V
14
13
12
11
10
9
14
13
12
11
10
9
1
2
3
4
5
6
7
1
2
3
4
5
6
7
IN
IN
S
R1
500Ω
0.1µF
+V
S
AD536A
AD536A
NONPOLARIZED
NC
NC
NC
–V
NC
NC
NC
R4
OFFSET
–V
S
SQUARER/
DIVIDER
SQUARER/
DIVIDER
S
–V
S
50kΩ ADJUST
20kΩ
–V
S
NC
NC
C
C
AV
AV
R3
750kΩ
COM
COM
CURRENT
MIRROR
CURRENT
MIRROR
dB
dB
0.1µF
V
BUF OUT
OUT
R
L
BUF OUT
V
OUT
R
L
R2
25kΩ
25kΩ
R
BUF IN
BUF IN
L
365Ω
BUF
25kΩ
8
8
BUF
10kΩ
10kΩ
I
I
OUT
OUT
TO
1kΩ
Figure 17. Single-Supply Connection
Figure 16. Optional External Gain and Output Offset Trims
CHOOSING THE AVERAGING TIME CONSTANT
SINGLE-SUPPLY OPERATION
The AD536A computes the rms of both ac and dc signals. If the
input is a slowly varying dc signal, the output of the AD536A
tracks the input exactly.
Refer to Figure 17 for single supply-rail configurations between
5 V and 36 V. When powered from a single supply, the input
stage (VIN pin) is internally biased at a voltage between ground
and the supply, and the input signal ac coupled. Biasing the
device between the supply and ground is simply a matter of
connecting the COM pin to an external resistor divider and
bypassing to ground. The resistor values are large, minimizing
power consumption, as the COM pin current is only 5 μA.
At higher frequencies, the average output of the AD536A
approaches the rms value of the input signal. The actual output
of the AD536A differs from the ideal output by a dc (or average)
error and some amount of ripple, as shown in Figure 18.
E
O
Note that the 10 kΩ and 20 kΩ resistors connected to the COM pin
(Figure 17) are asymmetrical, that is, the voltage at the COM pin is
1/3 of the supply. This ratio of input bias to supply is optimum
for the precision rectifier (aka absolute value circuit) input
circuit employed for rectifying ac input waveforms and ensures
full input symmetry for low signal voltages.
IDEAL E
O
DC ERROR = E – E (IDEAL)
O
O
AVERAGE E – E
O
O
DOUBLE FREQUENCY
RIPPLE
Capacitor C2 is required for AC input coupling, however an
external dc return is unnecessary because biasing occurs
internally. SelectC2 for the desired low frequency breakpoint
using an input resistance of 16.7 kΩ for the 1/ωRC calculation;
C2 = 1 μF for a cutoff at 10 Hz. Figure 11 and Figure 12 show
the input and output signal ranges for dual and single supply
configurations, respectively. The load resistor, RL, provides a
path to sink output sink current when an input signal is
disconnected.
TIME
Figure 18. Typical Output Waveform for Sinusoidal Input
The dc error is dependent on the input signal frequency and
the value of CAV. Use Figure 19 to determine the minimum value
of CAV, which yields a given percentage of dc error above a given
frequency using the standard rms connection.
The ac component of the output signal is the ripple. There are
two ways to reduce the ripple. The first method involves using a
large value of CAV. Because the ripple is inversely proportional
to CAV, a tenfold increase in this capacitance affects a tenfold
reduction in ripple.
When measuring waveforms with high crest factors, such as low
duty cycle pulse trains, the averaging time constant should be at
least 10 times the signal period. For example, a 100 Hz pulse
rate requires a 100 ms time constant, which corresponds to a
4 μF capacitor (time constant = 25 ms per μF).
Rev. E | Page 12 of 16
Data Sheet
AD536A
The primary disadvantage in using a large CAV to remove ripple
is that the settling time for a step change in input level is
increased proportionately. Figure 19 illustrates that the
relationship between CAV and 1% settling time is 115 ms for
each microfarad of CAV. The settling time is twice as great for
decreasing signals as it is for increasing signals. The values in
Figure 19 are for decreasing signals. Settling time also increases
for low signal levels, as shown in Figure 20.
The settling time, however, is increased by approximately a
factor of 3. Therefore, the values of CAV and C2 can be reduced
to permit faster settling times while still providing substantial
ripple reduction.
The two-pole postfilter uses an active filter stage to provide
even greater ripple reduction without substantially increasing
the settling times over a circuit with a one-pole filter. The values
of CAV, C2, and C3 can then be reduced to allow extremely fast
settling times for a constant amount of ripple. Caution should
be exercised in choosing the value of CAV, because the dc error
is dependent on this value and is independent of the postfilter.
100
10
1
100
10
1
0.
01% E
RRO
0.
1% E
R
For a more detailed explanation of these topics, refer to the RMS to
DC Conversion Application Guide, 2nd Edition, available online
from Analog Devices, Inc., at www.analog.com.
RRO
1% E
R
RRO
10% E
R
RRO
+V
V
S
R
IN
VALUES FOR C AND
1% SETTLING TIME
ABSOLUTE
VALUE
AV
V
14
+V
S
1
2
3
4
5
6
7
IN
0.1
0.1
FOR STATED % OF READING
AD536A
13 NC
12 NC
NC
1
AVERAGING ERROR
–V
S
SQUARER/
DIVIDER
ACCURACY ± 20% DUE TO
COMPONENT TOLERANCE
–V
AV
S
C
AV
0.01
0.01
100k
NC
11
10
9
1
10
100
1k
10k
C
COM
CURRENT
MIRROR
INPUT FREQUENCY (Hz)
dB
R
L
BUF OUT
1
PERCENT DC ERROR AND PERCENT RIPPLE (PEAK)
25kΩ
I
BUF IN
OUT
Figure 19. Error/Settling Time Graph for Use with the Standard RMS
Connection (See Figure 13 Through Figure 15)
BUF
8
Rx
24kΩ
+
–
C2
1
C3
–
+
10.0
7.5
V
OUT
rms
1
FOR SINGLE POLE, SHORT Rx, REMOVE C3.
Figure 21. Two-Pole Postfilter
5.0
10
2.5
1.0
PEAK-TO-PEAK RIPPLE
= 1µF
C
PEAK-TO-PEAK
RIPPLE (ONE POLE)
AV
C
= 1µF, C2 = 2.2µF
AV
1m
10m
100m
1
10
Rx = 0Ω
DC ERROR
1
rms INPUT LEVEL (V)
C
= 1µF
AV
(ALL FILTERS)
Figure 20. Settling Time vs. Input Level
A better method to reduce output ripple is the use of a postfilter.
Figure 21 shows a suggested circuit. If a single-pole filter is used
(C3 removed, RX shorted) and C2 is approximately twice the
value of CAV, the ripple is reduced, as shown in Figure 22, and
settling time is increased. For example, with CAV = 1 µF and C2
= 2.2 μF, the ripple for a 60 Hz input is reduced from 10% of
reading to approximately 0.3% of reading.
PEAK-TO-PEAK RIPPLE
= 1µF
C
AV
C2 = C3 = 2.2µF (TWO-POLE)
0.1
10
100
1k
10k
FREQUENCY (Hz)
Figure 22. Performance Features of Various Filter Types
(See Figure 13 to Figure 15 for Standard RMS Connection)
Rev. E | Page 13 of 16
AD536A
Data Sheet
OUTLINE DIMENSIONS
0.005 (0.13) MIN
0.080 (2.03) MAX
8
14
0.310 (7.87)
1
0.220 (5.59)
7
PIN 1
0.100 (2.54)
BSC
0.320 (8.13)
0.290 (7.37)
0.765 (19.43) MAX
0.060 (1.52)
0.015 (0.38)
0.200 (5.08)
MAX
0.150
(3.81)
MIN
0.200 (5.08)
0.125 (3.18)
0.015 (0.38)
0.008 (0.20)
SEATING
PLANE
0.070 (1.78)
0.030 (0.76)
0.023 (0.58)
0.014 (0.36)
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
\
Figure 23. 14-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP]
(D-14)
Dimensions shown in inches and (millimeters)
0.200 (5.08)
0.075 (1.91)
REF
REF
0.100 (2.54)
0.064 (1.63)
0.100 (2.54) REF
0.095 (2.41)
0.015 (0.38)
MIN
0.075 (1.90)
3
19
18
20
4
8
0.028 (0.71)
0.022 (0.56)
1
0.358 (9.09)
0.342 (8.69)
SQ
0.358
0.011 (0.28)
0.007 (0.18)
R TYP
(9.09)
MAX
SQ
BOTTOM
VIEW
0.050 (1.27)
BSC
14
0.075 (1.91)
13
9
REF
45° TYP
0.088 (2.24)
0.054 (1.37)
0.055 (1.40)
0.045 (1.14)
0.150 (3.81)
BSC
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 24. 20-Terminal Ceramic Leadless Chip Carrier [LCC]
(E-20-1)
Dimensions shown in inches and (millimeters)
0.098 (2.49) MAX
8
0.005 (0.13) MIN
14
0.310 (7.87)
0.220 (5.59)
1
7
PIN 1
0.100 (2.54) BSC
0.785 (19.94) MAX
0.320 (8.13)
0.290 (7.37)
0.060 (1.52)
0.015 (0.38)
0.200 (5.08)
MAX
0.150
(3.81)
MIN
0.200 (5.08)
0.125 (3.18)
0.015 (0.38)
0.008 (0.20)
SEATING
PLANE
15°
0°
0.070 (1.78)
0.030 (0.76)
0.023 (0.58)
0.014 (0.36)
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 25. 14-Lead Ceramic Dual In-Line Package [CERDIP]
(Q-14)
Dimensions shown in inches and (millimeters)
Rev. E | Page 14 of 16
Data Sheet
AD536A
REFERENCE PLANE
0.500 (12.70)
MIN
0.160 (4.06)
0.110 (2.79)
0.185 (4.70)
0.165 (4.19)
6
7
5
8
0.021 (0.53)
0.016 (0.40)
0.115
(2.92)
BSC
4
0.045 (1.14)
0.025 (0.65)
9
3
10
0.034 (0.86)
0.025 (0.64)
2
1
0.230 (5.84)
BSC
BASE & SEATING PLANE
0.040 (1.02) MAX
0.050 (1.27) MAX
36° BSC
DIMENSIONS PER JEDEC STANDARDS MO-006-AF
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 26. 10-Pin Metal Header Package [TO-100]
(H-10)
Dimensions shown in inches and (millimeters)
ORDERING GUIDE
Model1
AD536AJD
AD536AJDZ
AD536AKD
Temperature Range
Package Description
Package Option
D-14
D-14
D-14
D-14
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
14-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP]
14-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP]
14-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP]
14-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP]
10-Pin Metal Header Package [TO-100]
AD536AKDZ
AD536AJH
0°C to +70°C
H-10
AD536AJHZ
0°C to +70°C
10-Pin Metal Header Package [TO-100]
H-10
AD536AKH
0°C to +70°C
10-Pin Metal Header Package [TO-100]
H-10
AD536AKHZ
AD536AJQ
AD536AKQ
0°C to +70°C
0°C to +70°C
0°C to +70°C
10-Pin Metal Header Package [TO-100]
H-10
Q-14
Q-14
D-14
D-14
E-20-1
H-10
14-Lead Ceramic Dual In-Line Package [CERDIP]
14-Lead Ceramic Dual In-Line Package [CERDIP]
14-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP]
14-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP]
20-Terminal Ceramic Leadless Chip Carrier [LCC]
10-Pin Metal Header Package [TO-100]
10-Pin Metal Header Package [TO-100]
Die
20-Terminal Ceramic Leadless Chip Carrier [LCC]
14-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP]
10-Pin Metal Header Package [TO-100]
AD536ASD
−55°C to +125°C
−55°C to +125°C
−55°C to +125°C
−55°C to +125°C
−55°C to +125°C
−55°C to +125°C
−55°C to +125°C
−55°C to +125°C
−55°C to +125°C
AD536ASD/883B
AD536ASE/883B
AD536ASH
AD536ASH/883B
AD536ASCHIPS
5962-89805012A
5962-8980501CA
5962-8980501IA
H-10
E-20-1
D-14
H-10
1 Z = RoHS Compliant Part.
Rev. E | Page 15 of 16
AD536A
NOTES
Data Sheet
©1976–2012 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D00504-0-7/12(E)
Rev. E | Page 16 of 16
相关型号:
©2020 ICPDF网 联系我们和版权申明