AD9824KCPZRL [ADI]
Complete 14-Bit 30 MSPS CCD Signal Processor;型号: | AD9824KCPZRL |
厂家: | ADI |
描述: | Complete 14-Bit 30 MSPS CCD Signal Processor CD |
文件: | 总25页 (文件大小:466K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Complete 14-Bit 30 MSPS
CCD Signal Processor
a
AD9824
PRODUCT DESCRIPTION
FEATURES
The AD9824 is a complete analog signal processor for CCD
applications. It features a 30 MHz single-channel architecture
designed to sample and condition the outputs of interlaced and
progressive scan area CCD arrays. The AD9824’s signal chain
consists of an input clamp, a correlated double sampler (CDS),
PxGA, a digitally controlled VGA, a black level clamp, and a
14-bit A/D converter. Additional input modes are also pro-
vided for processing analog video signals.
14-Bit 30 MSPS A/D Converter
30 MSPS Correlated Double Sampler (CDS)
4 dB ꢀ 6 dB 6-Bit Pixel Gain Amplifier (PxGA®)
2 dB to 36 dB 10-Bit Variable Gain Amplifier (VGA)
Low Noise Clamp Circuits
Analog Preblanking Function
Auxiliary Inputs with VGA and Input Clamp
3-Wire Serial Digital Interface
3 V Single-Supply Operation
Low Power: 153 mW @ 3 V Supply
Space-Saving 48-Lead LFCSP Package
The internal registers are programmed through a 3-wire
serial digital interface. Programmable features include gain
adjustment, black level adjustment, input configuration, and
power-down modes.
APPLICATIONS
High Performance Digital Still Cameras
Industrial/Scientific Imaging
The AD9824 operates from a single 3 V power supply, typically
dissipates 153 mW, and is packaged in a 48-lead LFCSP.
FUNCTIONAL BLOCK DIAGRAM
AVDD
AVSS
HD
VD
VRT
VRB
PBLK
DRVDD
DRVSS
COLOR
BAND GAP
STEERING
REFERENCE
4dB ꢀ 6dB
PxGA
2dB~36dB
VGA
CDS
CCDIN
14
2:1
MUX
ADC
CLP
DOUT
CLP
6
CLPDM
AUX1IN
10
CLPOB
2:1
MUX
BUF
AUX2IN
BLK CLAMP
LEVEL
8
CONTROL
REGISTERS
CLP
DVDD
DVSS
DIGITAL
INTERFACE
INTERNAL
TIMING
AD9824
SL
SCK
SDATA
SHP
SHD DATACLK
PxGA is a registered trademark of Analog Devices, Inc.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© Analog Devices, Inc., 2002
AD9824* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
DISCUSSIONS
View all AD9824 EngineerZone Discussions.
DOCUMENTATION
Data Sheet
SAMPLE AND BUY
Visit the product page to see pricing options.
• AD9824: Complete 14-Bit 30 MSPS CCD Signal Processor
Data Sheet
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
REFERENCE MATERIALS
Technical Articles
DOCUMENT FEEDBACK
• High Integration Simplifies Signal Processing For CCDs
Submit feedback for this data sheet.
DESIGN RESOURCES
• AD9824 Material Declaration
• PCN-PDN Information
• Quality And Reliability
• Symbols and Footprints
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
AD9824–SPECIFICATIONS
GENERAL SPECIFICATIONS (TMIN to TMAX, AVDD = DVDD = 3.0 V, fDATACLK = 30 MHz, unless otherwise noted.)
Parameter
Min
Typ
Max
Unit
TEMPERATURE RANGE
Operating
Storage
–20
–65
+85
+150
°C
°C
POWER SUPPLY VOLTAGE
Analog, Digital, Digital Driver
2.7
3.6
V
POWER CONSUMPTION
Normal Operation
Power-Down Modes
Standby
(Specified Under Each Mode of Operation)
5
0.5
mW
mW
Total Power-Down
MAXIMUM CLOCK RATE
30
14
MHz
A/D CONVERTER
Resolution
Bits
Differential Nonlinearity (DNL)
No Missing Codes
Full-Scale Input Voltage
Data Output Coding
0.5
2.0
1.0
LSB
Bits Guaranteed
V
14
Straight Binary
VOLTAGE REFERENCE
Reference Top Voltage (VRT)
Reference Bottom Voltage (VRB)
2.0
1.0
V
V
Specifications subject to change without notice.
DIGITAL SPECIFICATIONS
(DRVDD = 2.7 V, CL = 20 pF, unless otherwise noted.)
Parameter
Symbol
Min
Typ
Max
Unit
LOGIC INPUTS
High Level Input Voltage
Low Level Input Voltage
High Level Input Current
Low Level Input Current
Input Capacitance
VIH
VIL
IIH
IIL
CIN
2.1
V
V
µA
µA
pF
0.6
10
10
10
LOGIC OUTPUTS
High Level Output Voltage, IOH = 2 mA
Low Level Output Voltage, IOL = 2 mA
VOH
VOL
2.2
V
V
0.5
Specifications subject to change without notice.
–2–
REV. 0
AD9824
(TMIN to TMAX, AVDD = DVDD = 3.0 V, fDATACLK = fSHP = fSHD = 30 MHz, unless otherwise noted.)
CCD-MODE SPECIFICATIONS
Parameter
OWER CONSUMPTION
Min
Typ Max
Unit
mW
Notes
P
153
See TPC 1 for Power Curves
MAXIMUM CLOCK RATE
30
MHz
CDS
Gain
0
500
dB
Allowable CCD Reset Transient1
Max Input Range Before Saturation1
Max CCD Black Pixel Amplitude1
mV
V p-p
mV
See Input Waveform in Footnote 1
PxGA Gain at 4 dB
1.0
200
PIXEL GAIN AMPLIFIER (PxGA)
Max Input Range
Max Output Range
1.0
1.6
V p-p
V p-p
Steps
Gain Control Resolution
64
Gain Monotonicity
Guaranteed
Gain Range (Two’s Complement Coding)
Min Gain (PxGA Gain Code 32)
Max Gain (PxGA Gain Code 31)
See Figure 28 for PxGA Gain Curve
–2.5
9.5
dB
dB
VARIABLE GAIN AMPLIFIER (VGA)
Max Input Range
Max Output Range
Gain Control Resolution
Gain Monotonicity
1.6
2.0
V p-p
V p-p
Steps
1024
Guaranteed
Gain Range
Low Gain (VGA Gain Code 77)
Max Gain (VGA Gain Code 1023)
See Figure 29 for VGA Gain Curve
Measured at ADC Output
2
36
dB
dB
BLACK LEVEL CLAMP
Clamp Level Resolution
Clamp Level
256
Steps
Min Clamp Level
Max Clamp Level
0
LSB
LSB
1020
SYSTEM PERFORMANCE
Gain Accuracy2
Low Gain (VGA Code 77)
Max Gain (VGA Code 1023)
Peak Nonlinearity, 500 mV Input Signal
Total Output Noise
Specifications Include Entire Signal Chain
Gain = (0.0353 × Code) +3.3
5.5
38.2
6
6.5
40.2
dB
dB
%
LSB rms
dB
39.4
0.1
2.0
40
12 dB Gain Applied
AC Grounded Input, 6 dB Gain Applied
Measured with Step Change on Supply
Power Supply Rejection (PSR)
POWER-UP RECOVERY TIME
Reference Standby Mode
Total Shutdown Mode
Normal Clock Signals Applied
1
3
15
ms
ms
ms
Power-Off Condition
NOTES
1Input signal characteristics defined as follows:
500mV TYP
RESET TRANSIENT
200mV MAX
OPTICAL BLACK PIXEL
1V MAX
INPUT SIGNAL RANGE
2PxGA gain fixed at Code 63 (3.3 dB).
Specifications subject to change without notice.
–3–
REV. 0
AD9824–SPECIFICATIONS
(TMIN to TMAX, AVDD = DVDD = 3.0 V, fDATACLK = 30 MHz, unless otherwise noted.)
AUX1-MODE SPECIFICATIONS
Parameter
Min
Typ
Max
Unit
mW
POWER CONSUMPTION
MAXIMUM CLOCK RATE
120
30
MHz
INPUT BUFFER
Gain
Max Input Range
0
dB
V p-p
1.0
2.0
VGA
Max Output Range
Gain Control Resolution
Gain (Selected Using VGA Gain Register)
Min Gain
V p-p
Steps
1023
0
36
dB
dB
Max Gain
Specifications subject to change without notice.
AUX2-MODE SPECIFICATIONS (TMIN to TMAX, AVDD = DVDD = 3.0 V, fDATACLK = 30 MHz, unless otherwise noted.)
Parameter
Min
Typ
Max
Unit
mW
POWER CONSUMPTION
MAXIMUM CLOCK RATE
INPUT BUFFER
120
30
MHz
(Same as AUX1-MODE)
512
VGA
Max Output Range
Gain Control Resolution
Gain (Selected Using VGA Gain Register)
Min Gain
2.0
V p-p
Steps
0
dB
dB
Max Gain
18
ACTIVE CLAMP
Clamp Level Resolution
Clamp Level (Measured at ADC Output)
Min Clamp Level
256
Steps
0
LSB
LSB
Max Clamp Level
1020
Specifications subject to change without notice.
–4–
REV. 0
AD9824
(CL = 20 pF, fSAMP = 30 MHz, CCD-Mode Timing in Figures 5 and 6, AUX-Mode Timing in Figure 7,
Serial Timing in Figures 21–24.)
TIMING SPECIFICATIONS
Parameter
Symbol
Min
Typ
Max
Unit
SAMPLE CLOCKS
DATACLK, SHP, SHD Clock Period
DATACLK High/Low Pulsewidth
SHP Pulsewidth
SHD Pulsewidth
CLPDM Pulsewidth
tCP
33
13
5
5
4
2
0
15
33
ns
ns
ns
ns
Pixels
Pixels
ns
ns
ns
tADC
tSHP
tSHD
tCDM
tCOB
tS1
16.7
8.3
8.3
10
CLPOB Pulsewidth
*
20
SHP Rising Edge to SHD Falling Edge
SHP Rising Edge to SHD Rising Edge
Internal Clock Delay
8.3
16.7
3.0
tS2
tID
Inhibited Clock Period
tINH
10
ns
DATA OUTPUTS
Output Delay
Output Hold Time
Pipeline Delay
tOD
tH
13
7.6
9
16
ns
ns
Cycles
7.0
SERIAL INTERFACE
Maximum SCK Frequency
SL to SCK Setup Time
SCK to SL Hold Time
SDATA Valid to SCK Rising Edge Setup
SCK Falling Edge to SDATA Valid Hold
SCK Falling Edge to SDATA Valid Read
fSCLK
tLS
tLH
tDS
tDH
tDV
10
10
10
10
10
10
MHz
ns
ns
ns
ns
ns
*
Minimum CLPOB pulsewidth is for functional operation only. Wider typical pulses are recommended to achieve low noise clamp performance.
Specifications subject to change without notice.
ORDERING GUIDE
ABSOLUTE MAXIMUM RATINGS
With
Respect
To
Temperature
Range
Package
Description
Package
Option
Model
Parameter
Min Max
Unit
AD9824KCP –20°C to +85°C LFCSP
CP-48
AVDD1, AVDD2
DVDD1, DVDD2
DRVDD
AVSS
DVSS
DRVSS –0.3 +3.9
–0.3 +3.9
–0.3 +3.9
V
V
V
V
V
V
V
V
THERMAL CHARACTERISTICS
Thermal Resistance
48-Lead LFCSP Package
Digital Outputs
DRVSS –0.3 DRVDD + 0.3
SHP, SHD, DATACLK
CLPOB, CLPDM, PBLK
SCK, SL, SDATA
VRT, VRB, CMLEVEL
BYP1-3, CCDIN
Junction Temperature
Lead Temperature (10 sec)
DVSS
DVSS
DVSS
AVSS
AVSS
–0.3 DVDD + 0.3
–0.3 DVDD + 0.3
–0.3 DVDD + 0.3
–0.3 AVDD + 0.3
–0.3 AVDD + 0.3
150
θ
JA = 26°C/W*
θ
JA is measured using a 4-layer PCB with the exposed paddle
*
soldered to the board.
V
°C
°C
300
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the AD9824 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. 0
–5–
AD9824
PIN CONFIGURATIONS
48 47 46 45 44 43 42 41 40 39 38 37
1
2
D2
36
35
34
33
32
31
30
29
28
27
26
25
AUX1IN
AVSS
AUX2IN
AVDD2
BYP3
PIN 1
IDENTIFIER
D3
3
D4
D5
4
5
D6
AD9824
6
D7
NC
TOP VIEW
7
D8
CCDIN
BYP2
(Not to Scale)
8
D9
9
D10
BYP1
10
11
12
D11
AVDD1
AVSS
AVSS
D12
(MSB) D13
13 14 15 16 17 18 19 20 21 22 23 24
NC = NO CONNECT
PIN FUNCTION DESCRIPTIONS
Pin Number
Name
Type
Description
1–12
13
14
15, 41
16
17
18
19
20
21
D2–D13
DRVDD
DRVSS
DVSS
DATACLK
DVDD1
HD
PBLK
CLPOB
SHP
SHD
CLPDM
VD
AVSS
AVDD1
BYP1
DO
P
P
P
DI
P
DI
DI
DI
DI
DI
DI
DI
P
Digital Data Outputs. Pin 12 (D13) is MSB.
Digital Output Driver Supply
Digital Output Driver Ground
Digital Ground
Digital Data Output Latch Clock
Digital Supply 1
Horizontal Drive. Used with VD for color steering control.
Preblanking Clock Input
Black Level Clamp Clock Input
CDS Sampling Clock for CCD’s Reference Level
CDS Sampling Clock for CCD’s Data Level
Input Clamp Clock Input
Vertical Drive. Used with HD for color steering control.
Analog Ground
Analog Supply 1
Internal Bias Level Decoupling
Internal Bias Level Decoupling
Analog Input for CCD Signal
Internally Not Connected
Internal Bias Level Decoupling
Analog Supply 2
22
23
24
25, 26, 35
27
28
29
30
31
32
33
34
36
37
38
39
40
42
43
44
P
AO
AO
AI
NC
AO
P
AI
AI
NC
AO
AO
P
NC
DI
DI
DI
DI
DI
BYP2
CCDIN
NC
BYP3
AVDD2
AUX2IN
AUX1IN
NC
VRT
VRB
DVDD2
NC
STBY
SL
SDATA
SCK
D0–D1
Analog Input
Analog Input
Internally Not Connected
A/D Converter Top Reference Voltage Decoupling
A/D Converter Bottom Reference Voltage Decoupling
Digital Supply 2
Internally Not Connected
Standby Mode, Active High. Same as total power-down mode.
Serial Digital Interface Load Pulse
Serial Digital Interface Data
Serial Digital Interface Clock
Digital Data Outputs. Pin 47 (D0) is LSB.
45
46
47, 48
TYPE: AI = Analog Input, AO = Analog Output, DI = Digital Input, DO = Digital Output, P = Power
–6–
REV. 0
AD9824
chain at the specified gain setting. The output noise can be
converted to an equivalent voltage using the relationship
1 LSB = (ADC Full Scale/2N codes) where N is the bit resolution
of the ADC. For the AD9824, 1 LSB is 125 µV.
DEFINITIONS OF SPECIFICATIONS
Differential Nonlinearity (DNL)
An ideal ADC exhibits code transitions that are exactly 1 LSB
apart. DNL is the deviation from this ideal value. Thus, every code
must have a finite width. No missing codes guaranteed to 14-bit
resolution indicates that all 16,384 codes, respectively, must
be present over all operating conditions.
Power Supply Rejection (PSR)
The PSR is measured with a step change applied to the supply
pins. This represents a high frequency disturbance on the
AD9824’s power supply. The PSR specification is calculated
from the change in the data outputs for a given step change in
the supply voltage.
Peak Nonlinearity
Peak nonlinearity, a full signal chain specification, refers to the
peak deviation of the output of the AD9824 from a true straight
line. The point used as “zero scale” occurs 1/2 LSB before the
first code transition. “Positive full scale” is defined as a Level 1,
1/2 LSB beyond the last code transition. The deviation is measured
from the middle of each particular output code to the true straight
line. The error is then expressed as a percentage of the 2 V ADC
full-scale signal. The input signal is always appropriately gained up
to fill the ADC’s full-scale range.
Internal Delay for SHP/SHD
The internal delay (also called aperture delay) is the time delay
that occurs from when a sampling edge is applied to the AD9824
until the actual sample of the input signal is held. Both SHP and
SHD sample the input signal during the transition from low to
high, so the internal delay is measured from each clock’s rising
edge to the instant the actual internal sample is taken.
Total Output Noise
The rms output noise is measured using histogram techniques.
The standard deviation of the ADC output codes is calculated
in LSB and represents the rms noise level of the total signal
EQUIVALENT INPUT CIRCUITS
DVDD
ACVDD
330ꢁ
ACVSS
ACVSS
DVSS
Figure 3. CCDIN (Pin 30)
Figure 1. Digital Inputs—SHP, SHD, DATACLK, CLPOB,
CLPDM, HD, VD, PBLK, SCK, and SL
DRVDD
DVDD
DATA
DVDD
DVDD
DATA IN
THREE-
STATE
330ꢁ
DOUT
DATA OUT
RNW
DVSS
DVSS
DVSS
DVSS
DRVSS
Figure 4. SDATA (Pin 45)
Figure 2. Data Outputs—D0–D13
REV. 0
–7–
–Typical Performance Characteristics
AD9824
100
90
80
70
60
50
40
30
20
10
0
190
180
170
V
= 3.3V
DD
160
150
140
130
V
= 3.0V
= 2.7V
DD
V
DD
120
110
100
10
0
255
511
767
1023
20
30
VGA GAIN CODE – LSB
SAMPLE RATE – MHz
TPC 1. Power vs. Sample Rate
TPC 3. Output Noise vs. VGA Gain
0.5
0.25
0
–0.25
–0.5
2000 4000
6000 8000
16000
10000 12000 14000
0
TPC 2. Typical DNL Performance
–8–
REV. 0
AD9824
CCD MODE AND AUX MODE TIMING
CCD
SIGNAL
N
N+1
N+2
N+9
N+10
tID
tID
SHP
tS1
tS2
tCP
SHD
tINH
DATACLK
tOD
tH
OUTPUT
DATA
N–10
N–9
N–8
N–1
N
NOTES
1. RECOMMENDED PLACEMENT FOR DATACLK RISING EDGE IS BETWEEN THE SHD RISING EDGE AND NEXT SHP FALLING EDGE.
2. CCD SIGNAL IS SAMPLED AT SHP AND SHD RISING EDGES.
Figure 5. CCD Mode Timing
HORIZONTAL
BLANKING
EFFECTIVE PIXELS
OPTICAL BLACK PIXELS
DUMMY PIXELS
EFFECTIVE PIXELS
CCD
SIGNAL
CLPOB
CLPDM
PBLK
OUTPUT
DATA
EFFECTIVE PIXEL DATA
OB PIXEL DATA
DUMMY BLACK
EFFECTIVE DATA
NOTES
1. CLPOB AND CLPDM WILL OVERWRITE PBLK. PBLK WILL NOT AFFECT CLAMP OPERATION IF OVERLAPPING CLPDM AND/OR CLPOB.
2. PBLK SIGNAL IS OPTIONAL.
3. DIGITAL OUTPUT DATA WILL BE ALL ZEROS DURING PBLK. OUTPUT DATA LATENCY IS 9 DATACLK CYCLES.
Figure 6. Typical CCD Mode Line Clamp Timing
N+9
N
N+1
N+8
tID
N+2
VIDEO
SIGNAL
tCP
DATACLK
tOD
tH
OUTPUT
DATA
N–10
N–9
N–8
N–1
N
Figure 7. AUX Mode Timing
–9–
REV. 0
AD9824
PIXEL GAIN AMPLIFIER (PxGA) TIMING
FRAME N
FRAME N+1
0101...
LINE 2
VD
0101...
LINE 0
2323...
LINE 1
0101...
LINE 2
0101...
LINE 0
2323...
LINE 1
LINE M–1
LINE M
LINE M–1
LINE M
HD
*0 = GAIN0, 1 = GAIN1, 2 = GAIN2, 3 = GAIN3
Figure 8. PxGA Mode 1 (Mosaic Separate) Frame/Line Gain Register Sequence
5 PIXEL MIN
VD
HD
3ns MIN
GAIN0
3ns MIN
SHP
GAIN3
GAINX
GAIN1
GAIN0
GAINX
GAIN2
PxGA GAIN
NOTES
1. MINIMUM PULSEWIDTH FOR HD AND VD IS 5 PIXEL CYCLES.
2. BOTH VD AND HD ARE INTERNALLY UPDATED AT SHP RISING EDGES. MINIMUM SETUP TIME IS 3 ns.
3. EVERY HD RISING EDGE WITH A PREVIOUS VD RISING EDGE WILL RESET TO 0101.
4. EVERY HD RISING EDGE WITHOUT A PREVIOUS VD RISING EDGE WILL ALTERNATE BETWEEN 0101... AND 2323.
Figure 9. PxGA Mode 1 (Mosaic Separate) Detailed Timing
EVEN FIELD
ODD FIELD
VD
0101...
LINE 2
0101...
LINE 0
2323...
LINE 1
0101...
LINE 0
2323...
LINE 1
0101...
LINE 2
LINE M–1
LINE M
LINE M–1
LINE M
HD
*0 = GAIN0, 1 = GAIN1, 2 = GAIN2, 3 = GAIN3
Figure 10. PxGA Mode 2 (Interlace) Frame/Line Gain Register Sequence
VD
HD
5 PIXEL MIN
3ns MIN
GAIN0
3ns MIN
SHP
PxGA
GAIN
GAINX
GAIN1
GAIN0
GAIN2
GAIN3
GAINX
NOTES
1. BOTH VD AND HD ARE INTERNALLY UPDATED AT SHP RISING EDGES.
2. EVERY HD RISING EDGE WITH A PREVIOUS VD RISING OR FALLING EDGE WILL RESET TO 0101.
3. EVERY HD RISING EDGE WITHOUT A PREVIOUS VD RISING EDGE WILL ALTERNATE BETWEEN 0101... AND 2323.
Figure 11. PxGA Mode 2 (Interlace) Detailed Timing
–10–
REV. 0
AD9824
LINE N
LINE N+1
VD
HD
012012012...
...01201
012012012...
*0 = GAIN0, 1 = GAIN1, 2 = GAIN2
Figure 12. PxGA Mode 3 (3-Color) Frame/Line Gain Register Sequence
5 PIXEL MIN
5 PIXEL MIN
3ns MIN
VD
HD
SHP
PxGA GAIN
GAIN1
GAIN2
GAIN0
GAIN0
GAIN1
GAINX
GAIN0
GAINX
NOTES
1. BOTH VD AND HD ARE INTERNALLY UPDATED AT SHP RISING EDGES.
2. EVERY HD RISING EDGE WITH A PREVIOUS VD RISING EDGE WILL RESET TO 012012.
Figure 13. PxGA Mode 3 (3-Color) Detailed Timing
LINE N
LINE N+1
VD
01230123012...
...01230
012301230123...
HD
*0 = GAIN0, 1 = GAIN1, 2 = GAIN2, 3 = GAIN3
Figure 14. PxGA Mode 4 (4-Color) Frame/Line Gain Register Sequence
5 PIXEL MIN
5 PIXEL MIN
3ns MIN
VD
HD
SHP
PxGA GAIN
GAIN1
GAIN2
GAIN0
GAIN0
GAIN1
GAINX
GAIN0
GAINX
NOTES
1. BOTH VD AND HD ARE INTERNALLY UPDATED AT SHP RISING EDGES.
2. EVERY HD RISING EDGE WITH A PREVIOUS VD RISING EDGE WILL RESET TO 01230123.
Figure 15. PxGA Mode 4 (4-Color) Detailed Timing
REV. 0
–11–
AD9824
ODD FIELD
VD
EVEN FIELD
0101...
2323...
LINE 2
2323...
LINE 0
2323...
LINE 1
0101...
LINE 0
0101...
LINE 1
LINE 2
LINE M–1
LINE M
LINE M–1
LINE M
HD
*0 = GAIN0, 1 = GAIN1, 2 = GAIN2, 3 = GAIN3
Figure 16. PxGA Mode 5 (VD Selected) Frame/Line Gain Register Sequence
VD
HD
5 PIXEL MIN
3ns MIN
3ns MIN
SHP
GAIN3
GAINX
GAIN0
GAIN1
GAIN0
GAINX
GAIN2
PxGA GAIN
NOTES
1. BOTH VD AND HD ARE INTERNALLY UPDATED AT SHP RISING EDGES.
2. EVERY HD RISING EDGE WITH A PREVIOUS VD FALLING EDGE WILL RESET TO 0101.
3. EVERY HD RISING EDGE WITH A PREVIOUS VD RISING EDGE WILL RESET TO 2323.
4. EVERY HD RISING EDGE WITHOUT A PREVIOUS VD RISING EDGE WILL REPEAT EITHER 0101... (EVEN) OR 2323... (ODD).
Figure 17. PxGA Mode 5 (VD Selected) Detailed Timing
FRAME N
0101...
FRAME N+1
0101...
LINE 2
VD
0101...
LINE 0
1212...
LINE 1
0101...
LINE 0
1212...
LINE 1
LINE 2
LINE M–1
LINE M
LINE M–1
LINE M
HD
* 0 = GAIN0, 1 = GAIN1, 2 = GAIN2
Figure 18. PxGA Mode 6 (Mosaic Repeat) Frame/Line Gain Register Sequence
5 PIXEL MIN
VD
HD
3ns MIN
GAIN0
3ns MIN
SHP
GAINX
GAIN1
GAIN0
GAINX
GAIN1
GAIN2
PxGA GAIN
NOTES
1. MINIMUM PULSEWIDTH FOR HD AND VD IS 5 PIXEL CYCLES.
2. BOTH VD AND HD ARE INTERNALLY UPDATED AT SHP RISING EDGES. MINIMUM SETUP TIME IS 3 ns.
3. EVERY HD RISING EDGE WITH A PREVIOUS VD RISING EDGE WILL RESET TO 0101.
4. EVERY HD RISING EDGE WITHOUT A PREVIOUS VD RISING EDGE WILL ALTERNATE BETWEEN 0101... AND 1212.
Figure 19. PxGA Mode 6 (Mosaic Repeat) Detailed Timing
–12–
REV. 0
AD9824
VD
HD
3ns MIN
3ns MIN
SHP
PxGA GAIN
GAIN1
GAIN0
GAIN2
GAIN3
GAIN0
NOTES
1. BOTH VD AND HD ARE INTERNALLY UPDATED AT SHP RISING EDGES.
2. VD = 0 AND HD = 0 SELECTS GAIN0.
3. VD = 0 AND HD = 1 SELECTS GAIN1.
4. VD = 1 AND HD = 0 SELECTS GAIN2.
5. VD = 1 AND HD = 1 SELECTS GAIN3.
Figure 20. PxGA Mode 7 (User-Specified) Detailed Timing
REV. 0
–13–
AD9824
SERIAL INTERFACE TIMING AND INTERNAL REGISTER DESCRIPTION
Table I. Internal Register Map
Register
Name
Address
A0 A1 A2
Data Bits
D4 D5
D0 D1 D2
D3
D6
D7
D8
D9
D10
Operation
0 0 0
Channel Select Power-Down
CCD/AUX1/2 Modes
Software OB Clamp
01
12
01
01
01
Reset
On/Off
VGA Gain
Clamp Level
Control
1 0
0
LSB
LSB
MSB
X
X
X
X
0
1
1
0
MSB
01
X
1
0
Color Steering Mode
Selection
PxGA
Clock Polarity Select for
01
Three-
State
On/Off SHP/SHD/CLP/DATA
PxGA Gain0
PxGA Gain1
PxGA Gain2
0
1
0
1
0
0
1
1
1
1
1
1
LSB
LSB
LSB
LSB
MSB
MSB
MSB
MSB
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
PxGA Gain3
NOTES
1Internal use only. Must be set to zero.
2Must be set to one.
RNW
TEST BIT
0
SDATA
SCK
A0
A1
A2
0
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
tDS
tDH
tLS
tLH
SL
NOTES
1. SDATA BITS ARE INTERNALLY LATCHED ON THE RISING EDGES OF SCK.
2. RNW = READ-NOT-WRITE. SET LOW FOR WRITE OPERATION.
3. TEST BITS = INTERNAL USE ONLY. MUST BE SET LOW.
4. SYSTEM UPDATE OF LOADED REGISTERS OCCURS ON SL RISING EDGE.
Figure 21. Serial Write Operation
RNW
1
TEST BIT
0
SDATA
SCK
A0
A1
0
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
tDS
tDH
tDV
tLS
tLH
SL
NOTES
1. RNW = READ-NOT-WRITE. SET HIGH FOR READ OPERATION.
2. TEST BITS = INTERNAL USE ONLY. MUST BE SET LOW.
3. SERIAL DATA FROM THE SELECTED REGISTER IS VALID STARTING AFTER THE 5TH SCK FALLING EDGE AND IS UPDATED ON
SCK FALLING EDGES.
Figure 22. Serial Readback Operation
–14–
REV. 0
AD9824
11 BITS
OPERATION
10 BITS
8 BITS
10 BITS
CONTROL
6 BITS
6 BITS
6 BITS
6 BITS
PxGA GAIN3
ACG GAIN CLAMP LEVEL
PxGA GAIN0 PxGA GAIN1 PxGA GAIN2
RNW A0
A1 A2
...
...
...
...
...
...
...
...
SDATA
0
0
0
0
0
D9 D0
D10 D0
D9
D7 D0
D0
D5 D0
D0
D5
D0
D5
D5
D0
...
...
...
...
...
...
...
...
SCK
SL
2
3
4
5
6
16 17
26 27
34 35
44 45
50 51
56 57
62 63
68
1
...
NOTES
1. ANY NUMBER OF ADJACENT REGISTERS MAY BE LOADED SEQUENTIALLY, BEGINNING WITH THE LOWEST ADDRESS AND INCREMENTING ONE ADDRESS AT A TIME.
2. WHEN SEQUENTIALLY LOADING MULTIPLE REGISTERS, THE EXACT REGISTER LENGTH (SHOWN ABOVE) MUST BE USED FOR EACH REGISTER.
3. ALL LOADED REGISTERS WILL BE SIMULTANEOUSLY UPDATED WITH THE RISING EDGE OF SL.
Figure 23. Continuous Serial Write Operation to All Registers
PxGA GAIN3
PxGA GAIN1
D2
PxGA GAIN2
PxGA GAIN0
D2 D3
A2
1
RNW A0
A1
0
...
...
0
0
0
D0
D1
D4
D5
D0
D1
D3
D4
D5
D0
D5
D0
D5
SDATA
SCK
SL
...
...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
23
24
29
...
Figure 24. Continuous Serial Write Operation to All PxGA Gain Registers
Table II. Operation Register Contents (Default Value x000)
Optical Black Clamp
D5
Reset
D4
Power-Down Modes
D3 D2
Channel Selection
D1 D0
D10 D9 D8 D7 D6
01
01
01
12
01
0
1
Enable Clamping
Disable Clamping
0 Normal
1 Reset All Registers
to Default
0
0
1
1
0
1
0
1
Normal Power
Test Only
Standby
0
0
1
1
0
1
0
1
CCD Mode
AUX1 Mode
AUX2 Mode
Test Only
Total Power-Down
NOTES
1
Must be set to zero.
Set to one.
2
Table III. VGA Gain Register Contents (Default Value x000)
MSB
D9
LSB
D0
D10
D8
D7
D6
D5
D4
D3
D2
D1
Gain (dB)
X
0
0
0
1
0
•
•
•
1
1
1
1
1
1
1
2.0
•
•
•
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
1
35.965
36.0
REV. 0
–15–
AD9824
Table IV. Clamp Level Register Contents (Default Value x080)
MSB
D7
LSB
D0
D10
D9
D8
D6
D5
D4
D3
D2
D1
Clamp Level (LSB)
X
X
X
0
0
0
0
0
0
0
0
0
0
0
0
•
0
0
0
0
0
0
0
0
1
0
1
0
0
4
8
•
•
•
•
•
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
1
1016
1020
Table V. Control Register Contents (Default Value x000)
Data Out
DATACLK
D8 D7 D6
CLP/PBLK
D5
SHP/SHD
D4
PxGA
Color Steering Modes
D2 D1 D0
D10 D9
0 Enable
1 Three-State
D32
X
01 01 0 Rising Edge Trigger 0 Active Low 0 Active Low 0 Disable 0
0
0
1
1
0
0
1
1
0 Steering Disabled
1 Mosaic Separate
0 Interlace
1 3-Color
0 4-Color
1 VD Selected
0 Mosaic Repeat
1 User Specified
1 Falling Edge Trigger 1 Active High 1 Active High 1 Enable
0
0
0
1
1
1
1
NOTES
1 Must be set to zero.
2 When D3 = 0 (PxGA disabled), the PxGA gain is fixed to Code 63 (3.3dB).
Table VI. PxGA Gain Registers for Gain0, Gain1, Gain2, Gain3 (Default Value x000)
MSB
D5
LSB
D0
D10
D9
D8
D7
D6
D4
D3
D2
D1
Gain (dB)*
X
X
X
X
X
0
1
1
1
1
1
+9.5
•
•
•
•
•
•
0
1
0
1
0
1
0
1
0
1
0
1
+3.5
+3.3
•
•
•
•
•
•
1
0
0
0
0
0
–2.5
*Control Register Bit D3 must be set high (PxGA Enable) to use the PxGA Gain Registers.
–16–
REV. 0
AD9824
CIRCUIT DESCRIPTION AND OPERATION
The AD9824 signal processing chain is shown in Figure 25.
Each processing step is essential in achieving a high quality image
from the raw CCD pixel data.
gain change on the system black level. Another advantage of
removing this offset at the input stage is to maximize system
headroom. Some area CCDs have large black level offset volt-
ages, which, if not corrected at the input stage, can significantly
reduce the available headroom in the internal circuitry when
higher VGA gain settings are used.
DC Restore
To reduce the large dc offset of the CCD output signal, a dc
restore circuit is used with an external 0.1 µF series coupling
capacitor. This restores the dc level of the CCD signal to approxi-
mately 1.5 V to be compatible with the 3 V single supply of
the AD9824.
Horizontal timing is shown in Figure 6. It is recommended
that the CLPDM pulse be used during valid CCD dark pixels.
CLPDM may be used during the optical black pixels, either
together with CLPOB or separately. The CLPDM pulse should
be a minimum of 4 pixels wide.
Correlated Double Sampler
The CDS circuit samples each CCD pixel twice to extract the
video information and reject low frequency noise. The timing
shown in Figure 5 illustrates how the two CDS clocks, SHP
and SHD, are used to sample the reference level and data level
of the CCD signal, respectively. The CCD signal is sampled on
the rising edges of SHP and SHD. Placement of these two clock
signals is critical in achieving the best performance from the CCD.
An internal SHP/SHD delay (tID) of 3 ns is caused by internal
propagation delays.
PxGA
The PxGA provides separate gain adjustment for the individual
color pixels. A programmable gain amplifier with four separate
values, the PxGA has the capability to “multiplex” its gain value
on a pixel-to-pixel basis. This allows lower output color pixels to
be gained up to match higher output color pixels. Also, the PxGA
may be used to adjust the colors for white balance, reducing the
amount of digital processing that is needed. The four different gain
values are switched according to the color steering circuitry.
Seven different color steering modes for different types of CCD
color filter arrays are programmed in the AD9824’s Control Regis-
ter. For example, mosaic separate steering mode accommodates
the popular “Bayer” arrangement of red, green, and blue filters
(see Figure 26).
Input Clamp
A line-rate input clamping circuit is used to remove the CCD’s
optical black offset. This offset exists in the CCD’s shielded black
reference pixels. Unlike some AFE architectures, the AD9824
removes this offset in the input stage to minimize the effect of a
VD
3
PxGA MODE
SELECTION
COLOR
STEERING
HD
2
GAIN0
GAIN1
GAIN2
GAIN3
PxGA GAIN
REGISTERS
4:1
MUX
DC RESTORE
CDS
INTERNAL
6
V
REF
2V FULL SCALE
2dB TO 36dB
VGA
0.1ꢂF
14
CCDIN
14-BIT
ADC
DOUT
PxGA
–2dB TO +10dB
CLPOB
OPTICAL BLACK
CLAMP
8-BIT
DAC
INPUT OFFSET
CLAMP
10
CLPDM
DIGITAL
FILTERING
VGA GAIN
REGISTER
8
CLAMP LEVEL
REGISTER
Figure 25. CCD Mode Block Diagram
REV. 0
–17–
AD9824
Variable Gain Amplifier
MOSAIC SEPARATE COLOR
STEERING MODE
CCD: PROGRESSIVE BAYER
The VGA stage provides a gain range of 2 dB to 36 dB, program-
mable with 10-bit resolution through the serial digital interface.
Combined with approximately 4 dB from the PxGA stage, the
total gain range for the AD9824 is 6 dB to 40 dB. The minimum
gain of 6 dB is needed to match -a 1 V input signal with the
ADC full-scale range of 2 V. When compared to 1 V full-scale
systems (such as ADI’s AD9803), the equivalent gain range is
0 dB to 34 dB.
Gr
LINE0
LINE1
LINE2
GAIN0, GAIN1, GAIN0, GAIN1...
GAIN2, GAIN3, GAIN2, GAIN3...
GAIN0, GAIN1, GAIN0, GAIN1...
R
Gb
R
Gr
B
R
Gb
R
B
Gr
Gr
B
Gb
Gb
B
Figure 26. CCD Color Filter Example: Progressive Scan
The VGA gain curve follows a “linear-in-dB” shape. The exact
VGA gain can be calculated for any gain register value by using
the following equation:
CCD: INTERLACED BAYER
EVEN FIELD
VD SELECTED COLOR
STEERING MODE
Gr
Gr
Gr
Gr
LINE0
LINE1
LINE2
GAIN0, GAIN1, GAIN0, GAIN1...
GAIN0, GAIN1, GAIN0, GAIN1...
GAIN0, GAIN1, GAIN0, GAIN1...
R
R
R
R
Gr
Gr
Gr
Gr
R
R
R
R
Code Range Gain Equation (dB)
0–1023
Gain = (0.0353)(Code)
As shown in the CCD Mode Specifications, only the VGA gain
range from 2 dB to 36 dB has tested and guaranteed accuracy.
This corresponds to a VGA gain code range of 77 to 1023. The
Gain Accuracy Specifications also include a PxGA gain of approxi-
mately 3.3 dB, for a total gain range of 6 dB to 40 dB.
ODD FIELD
Gb
B
Gb
B
LINE0
LINE1
LINE2
GAIN2, GAIN3, GAIN2, GAIN3...
GAIN2, GAIN3, GAIN2, GAIN3...
GAIN2, GAIN3, GAIN2, GAIN3...
36
30
24
18
12
6
Gb
Gb
B
B
Gb
Gb
B
B
Gb
B
Gb
B
Figure 27. CCD Color Filter Example: Interlaced
The same Bayer pattern can also be interlaced, and the VD
selected mode should be used with this type of CCD (see
Figure 27). The color steering performs the proper multiplexing
of the R, G, and B gain values (loaded into the PxGA gain regis-
ters) and is synchronized by the user with vertical (VD) and
horizontal (HD) sync pulses. For more detailed information, see
the PxGA Timing section. The PxGA gain for each of the four
channels is variable from –2.5 dB to +9.5 dB, controlled in 64
steps through the serial interface. The PxGA gain curve is
shown in Figure 28.
0
0
127
255
383
511
639
767
895
1023
VGA GAIN REGISTER CODE
Figure 29. VGA Gain Curve (Gain from PxGA Not Included)
Optical Black Clamp
The optical black clamp loop is used to remove residual offsets
in the signal chain and to track low frequency variations in the
CCD’s black level. During the optical black (shielded) pixel
interval on each line, the ADC output is compared with a fixed
black level reference, selected by the user in the clamp level
register. The clamp level is adjustable from 0 to 1020 LSB, in
256 steps. The resulting error signal is filtered to reduce noise,
and the correction value is applied to the ADC input through a
D/A converter. Normally, the optical black clamp loop is turned
on once per horizontal line, but this loop can be updated more
slowly to suit a particular application. If external digital clamping
is used during the post processing, the AD9824 optical black
clamping may be disabled using Bit D5 in the Operation Register
(see Serial Interface Timing and Internal Register Description
section). When the loop is disabled, the clamp level register may
still be used to provide programmable offset adjustment.
10
8
6
4
2
0
–2
–4
32
40
48
58
0
8
16
24
31
(011111)
(100000)
PxGA GAIN REGISTER CODE
Horizontal timing is shown in Figure 6. The CLPOB pulse
should be placed during the CCD’s optical black pixels. It is
recommended that the CLPOB pulse duration be at least 20
pixels wide to minimize clamp noise. Shorter pulsewidths may be
used, but clamp noise may increase and the ability to track
low frequency variations in the black level will be reduced.
Figure 28. PxGA Gain Curve
–18–
REV. 0
AD9824
A/D Converter
The VGA gains up the signal level with respect to the 0.4 V bias
level. Signal levels above the bias level will be further increased
to a higher ADC code, while signal levels below the bias level
will be further decreased to a lower ADC code.
The AD9824 uses high performance ADC architecture, opti-
mized for high speed and low power. Differential nonlinearity
(DNL) performance is typically better than 0.5 LSB, as shown in
TPC 2. Instead of the 1 V full-scale range used by the earlier
AD9801 and AD9803 products from Analog Devices, the
AD9824’s ADC uses a 2 V input range. Better noise perfor-
mance results from using a larger ADC full-scale range
(see TPC 3).
AUX2 Mode
For sampling video-type waveforms, such as NTSC and PAL
signals, the AUX2 channel provides black level clamping, gain
adjustment, and A/D conversion. Figure 31 shows the circuit
configuration for using the AUX2 channel input (Pin 34). An
external 0.1 µF blocking capacitor is used with the on-chip video
clamp circuit to level shift the input signal to a desired refer-
ence level. The clamp circuit automatically senses the most
negative portion of the input signal and adjusts the voltage
across the input capacitor. This forces the black level of the
input signal to be equal to the value programmed into the Clamp
Level Register (see Serial Interface Timing and Internal Register
Description). The VGA provides gain adjustment from 0 dB to
18 dB. The same VGA Gain Register is used, but only the
9 MSBs of the gain register are used (see Table VII.)
AUX1 Mode
For applications that do not require CDS, the AD9824 can be
configured to sample ac-coupled waveforms. Figure 30 shows
the circuit configuration for using the AUX1 channel input
(Pin 36). A single 0.1 µF ac-coupling capacitor is needed between
the input signal driver and the AUX1IN pin. An on-chip dc-bias
circuit sets the average value of the input signal to approximately
0.4 V, which is referenced to the midscale code of the ADC.
The VGA Gain Register provides a gain range of 0 dB to 36 dB in
this mode of operation (see VGA Gain Curve, Figure 29).
0.4V
0.8V
??V
0dB TO 36dB
5kꢁ
0.1ꢂF
AUX1IN
INPUT SIGNAL
VGA
ADC
MIDSCALE
10
0.4V
0.4V
VGA GAIN
REGISTER
Figure 30. AUX1 Circuit Configuration
VGA GAIN
REGISTER
9
0dB TO 18dB
BUFFER
AUX2IN
VIDEO
SIGNAL
ADC
VGA
0.1ꢂF
CLAMP LEVEL
VIDEO CLAMP
CIRCUIT
LPF
CLAMP LEVEL
REGISTER
8
Figure 31. AUX2 Circuit Configuration
Table VII. VGA Gain Register Used for AUX2-Mode
MSB
D9
LSB
D0
D10
D8
D7
D6
D5
D4
D3
D2
D1
Gain (dB)
X
0
1
X
0
X
0
X
0
X
0
•
X
0
X
0
X
0
X
0
X
0
0.0
0.0
•
•
•
•
•
1
1
1
1
1
1
1
1
1
1
18.0
REV. 0
–19–
AD9824
APPLICATIONS INFORMATION
The AD9824’s digital output data is then processed by the
image processing ASIC. The internal registers of the AD9824—
used to control gain, offset level, and other functions—are
programmed by the ASIC or microprocessor through a 3-wire
serial digital interface. A system timing generator provides the
clock signals for both the CCD and the AFE.
The AD9824 is a complete analog front end (AFE) product for
digital still camera and camcorder applications. As shown in
Figure 32, the CCD image (pixel) data is buffered and sent to
the AD9824 analog input through a series input capacitor.
The AD9824 performs the dc restoration, CDS, gain adjust-
ment, black level correction, and analog-to-digital conversion.
DIGITAL
OUTPUTS
CCD
V
AD9824
OUT
ADC
0.1ꢂF
OUT
DIGITAL IMAGE
PROCESSING
ASIC
SERIAL
INTERFACE
CCDIN
REGISTER-
DATA
BUFFER
V-DRIVE
CDS/CLAMP
TIMING
CCD
TIMING
TIMING
GENERATOR
Figure 32. System Applications Diagram
–20–
REV. 0
AD9824
3V
ANALOG SUPPLY
0.1ꢂF
1.0ꢂF
1.0ꢂF
3
SERIAL
INTERFACE
48 47 46 45 44 43 42 41 40 39 38 37
D2
AUX1IN
AVSS
AUX2IN
AVDD2
BYP3
1
36
35
34
33
32
31
30
29
28
27
26
25
PIN 1
IDENTIFIER
D3
2
3
0.1ꢂF
0.1ꢂF
D4
D5
3V
ANALOG SUPPLY
4
D6
5
D7
AD9824
NC
6
D8
TOP VIEW
CCDIN
BYP2
7
CCD SIGNAL
(Not to Scale)
D9
0.1ꢂF
8
D10
BYP1
0.1ꢂF
0.1ꢂF
9
D11
AVDD1
AVSS
AVSS
10
11
12
D12
3V
(MSB) D13
ANALOG SUPPLY
0.1ꢂF
14
DATA
OUTPUTS
13 14 15 16 17 18 19 20 21 22 23 24
NC = NO CONNECT
3V
DRIVER
SUPPLY
0.1ꢂF
8
CLOCK
INPUTS
0.1ꢂF
3V
ANALOG SUPPLY
Figure 33. Recommended Circuit Configuration for CCD-Mode
Internal Power-On Reset Circuitry
their respective ground pins. All decoupling capacitors should
be located as close as possible to the package pins. A single clean
power supply is recommended for the AD9824, but a separate
digital driver supply may be used for DRVDD (Pin 13). DRVDD
should always be decoupled to DRVSS (Pin 14), which should
be connected to the analog ground plane. Advantages of using
a separate digital driver supply include using a lower voltage
(2.7 V) to match levels with a 2.7 V ASIC, and reducing digital
power dissipation and potential noise coupling. If the digital
outputs (Pins 1–12) must drive a load larger than 20 pF, buff-
ering is recommended to reduce digital code transition noise.
Alternatively, placing series resistors close to the digital out-
put pins may also help reduce noise.
After power-on, the AD9824 will automatically reset all internal
registers and perform internal calibration procedures. This takes
approximately 1 ms to complete. During this time, normal
clock signals and serial write operations may occur. However,
serial register writes will be ignored until the internal reset opera-
tion is completed.
Grounding and Decoupling Recommendations
As shown in Figure 33, a single ground plane is recommended
for the AD9824. This ground plane should be as continuous as
possible, particularly around Pins 25 through 39. This will
ensure that all analog decoupling capacitors provide the lowest
possible impedance path between the power and bypass pins and
REV. 0
–21–
AD9824
OUTLINE DIMENSIONS
Dimensions shown in millimeters and (inches)
48-Lead Frame Chip Scale Package LFCSP
7 x 7 mm Body
(CP-48)
0.60 (0.0236)
0.42 (0.0165)
0.24 (0.0094)
0.30 (0.0118)
0.23 (0.0091)
0.18 (0.0071)
ꢃ 4
7.00 (0.2756)
BSC SQ
37
36
48
1
PIN 1
INDICATOR
5.45 (0.2146)
5.30 (0.2087) SQ
5.15 (0.2028)
6.75 (0.2657)
BSC SQ
BOTTOM
VIEW
TOP
VIEW
1
2
25
24
0.50 (0.0197)
0.40 (0.0157)
0.30 (0.0118)
0.70 (0.0315) MAX
0.65 (0.0276) NOM
13
5.50 (0.2165)
REF
12ꢄ MAX
0.90 (0.0354) MAX
0.85 (0.0335) NOM
0.05 (0.0020)
0.01 (0.0004)
0.00 (0.0000)
COPLANARITY
0.20 (0.0079)
REF
0.50 (0.0197)
BSC
SEATING
PLANE
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
COMPLIANT TO JEDEC STANDARDS MO-220
–22–
REV. 0
–23–
–24–
相关型号:
©2020 ICPDF网 联系我们和版权申明