ADN2809 [ADI]
Multi-Rate to 2.7Gbps Clock and Data Recovery IC with Limiting Amplifier; 多速率为2.7Gbps的时钟和数据恢复IC,带限幅放大器![ADN2809](http://pdffile.icpdf.com/pdf1/p00024/img/icpdf/ADN2809_126503_icpdf.jpg)
型号: | ADN2809 |
厂家: | ![]() |
描述: | Multi-Rate to 2.7Gbps Clock and Data Recovery IC with Limiting Amplifier |
文件: | 总13页 (文件大小:183K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
Multi-Rate to 2.7Gbps Clock and Data
Recovery IC with Limiting Amplifier
a
Preliminary Technical Data
ADN2809
FEATURES
Meets SONET Requirements for Jitter Transfer /
Generation / Tolerance
Quantizer Sensitivity: 6 mV typical
PRODUCT DESCRIPTION
The ADN2809 provides the receiver functions of Quantization,
Signal Level Detect and Clock and Data Recovery at rates of
OC-3, OC-12, Gigabit Ethernet, OC-48 and all FEC rates. All
SONET jitter requirements are met, including: Jitter Transfer;
Jitter Generation; and Jitter Tolerance. All specifications are
quoted for -40 to 85C ambient temperature unless otherwise
noted.
·
·
Adjustable Slice Level: +/- 100 mV
1.9GHz minimum Bandwidth
Loss of Signal Detect Range: 4mV to 17mV
Single Reference Clock Frequency for all rates
Including 15/14 (7%) Wrapper Rate
The device is intended for WDM system applications and can be
used with either an external reference clock or an on-chip
oscillator crystal. Both native rates and 15/14 rate digital
‘wrappers’ rates are supported by the ADN2809, without any
change of reference clock required.
·
Choice of 19.44, 38.88, 77.76 or
155.52MHz
LVPECL / LVDS / LVCMOS / LVTTL compatible
inputs (LVPECL / LVDS only at 155.52 MHz)
19.44MHz Crystal Oscillator for Module apps
Loss of Lock indicator
Loopback mode for High Speed Test Data
Output Squelch & Clock Recovery Functions
Single Supply Operation: 3.3 Volts (+10%)
Low Power: 780 mW Typical
This device together with a PIN diode and a TIA preamplifier
can implement a highly integrated, low cost, low power fiber
optic receiver.
The receiver front end Signal Detect circuit indicates when the
input signal level has fallen below a user adjustable threshold.
Patented Clock Recovery Architecture
7 x 7 mm 48 pin LFCSP
The ADN2809 is available in a compact 48 pin chip scale
package.
APPLICATIONS
SONET OC-3/12/48, SDH STM-1/4/16, and all
associated FEC rates
WDM transponders
SONET/SDH regenerators and test equipment
Backplane applications
Functional Block Diagram
REV. PrB Sept 2001
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use; nor for any infringements of patents or other rights of third parties which
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
©Analog Devices, Inc., 2001
ADN2809
ADN2809 ELECTRICAL CHARACTERISTICS at TA=TMIN to TMAX, VCC=VMIN to VMAX, VEE=0V, CF=4.7mF, 20 ohm ESR for xo unless otherwise noted
Parameter
Conditions
Min
Typ
Max
Units
QUANTIZER–DC CHARACTERISTICS
Input Voltage Range
Single Ended, DC Coupled @ PIN or NIN
“
0
0.4
1.2
1.2
V
V
V
mV
mV
mV
mA
Input Common Mode Voltage
Input Peak-to-Peak Differential Voltage
Input Sensitivity, VSENSE (Peak-to-Peak Differential)
Input Overdrive, VOD
Input Maximum Offset Voltage
Input Current
@ PIN or NIN AC Coupled I/P1
PIN- NIN, Figure 2, BER= <1 x 10-10
Figure 3, BER = <1 X 10-10
SliceP, SliceN = VCC
2.4
6
3
0.5
10
244
10
5
Input RMS Noise
BER = <1 X 10-10
mVrms
QUANTIZER-AC CHARACTERISTICS
Upper –3 dB Bandwidth
Small Signal Gain
S11 Maximum @ 2.5GHz, Figure 7
Input Resistance
1.9
54
-15
50
0.65
10
GHz
dB
dB
W
pF
ps
Differential
Single-Ended
Input Capacitance
Pulse Width Distortion
QUANTIZER SLICE ADJUSTMENT
Gain (Threshold/Vin)
Control Voltage Range
Control Voltage Range
Slice Threshold Offset
Vin = SliceP-SliceN
SliceP-SliceN
SliceP or SliceN
Full input range
0.131
-0.8
1.3
0.134
0.8
VCC
1.0
V/V
V
V
-1.0
mV
LEVEL DETECT
Level Detect Range (See Figure 4)
2
6
15
3
8.8
17
4
12
21
mV
mV
mV
RTHRESH = 0W
R
R
THRESH = 10kW
THRESH = 200kW
Response Time
0.1
3
5
ms
DC Coupled
Hysterises (Electrical), AC Coupled Signal
5
5
5
7
7
7
dB
dB
dB
RTHRESH = 0W
R
R
THRESH = 10kW
THRESH = 200kW
SDOUT output Logic High
SDOUT output Logic Low
2.7
3
0.2
V
V
Load = +2mA (ADN2812 Sources I)
Load = -2mA (ADN2812 Sinks I)
0.4
Level Detect Output is a logic “1” LVCMOS
Compatible with no signal present.
POWER SUPPLY VOLTAGE
POWER SUPPLY CURRENT
VMIN to VMAX
VMIN to VMAX
3.0
140
3.6
380
V
mA
236
NOTE: SONET SPECS APPEAR IN
BOLD
PHASE-LOCKED LOOP CHARACTERISTICS
OC-48
Gigabit Ethernet
OC-12
JITTER TRANSFER BANDWIDTH
(See Figure 5 and Table 1)
370
185
93
2000
1000
500
KHz
KHz
KHz
KHz
OC-3
23
130
OC-48
Gigabit Ethernet
OC-12
JITTER TOLERANCE TRACKING BANDWIDTH
(See Figure 5 and Table 1)
1.0
0.5
0.25
0.065
4.8
4.8
4.8
4.8
MHz
MHz
MHz
MHz
OC-3
600 Hz
6 KHz
100 MHz
1 MHz
JITTER TOLERANCE (OC-48)
80
>202
5.5
UIp-p
UIp-p
UIp-p
UIp-p
>0.62
JITTER GENERATION
(12kHz to 20MHz)
OC-48
0.003
0.03
0.01
0.1
UI rms
UIp-p
Gigabit Ethernet
OC-12
(12kHz to 10MHz)
(12kHz to 5MHz)
(12kHz to 1.3MHz)
0.003
0.03
0.01
0.1
UI rms
UIp-p
0.003
0.03
0.01
0.1
UI rms
UIp-p
OC-3
0.003
0.03
0.01
0.1
UI rms
UIp-p
REV. PrB Oct. .2001
- 2 -
ADN2809
ADN2809 ELECTRICAL CHARACTERISTICS at TA=TMIN to TMAX, VCC=VMIN to VMAX, VEE=0V, CF=4.7mF, 20 ohm ESR for xo unless otherwise noted
Parameter
JITTER PEAKING MAXIMUM
Conditions
OC-48
Min
Typ
0.1
Max
Units
dB
Gigabit Ethernet
OC-12
0.1
0.1
dB
dB
OC-3
0.1
dB
CML OUTPUT FORMAT
Single-Ended Output Voltage Swing VSE
Differential Output Voltage Swing VDIFF
See Figure 2 and Figure 6
See Figure 2 and Figure 6
300
600
430
860
550
1100
mV
mV
Rise Time (tR)
Fall Time (tF)
20% - 80%
80% - 20%
150
150
pS
pS
Output High Voltage VOH
Output Low Voltage VOL
Figure 6
Figure 6
VCC
V
V
VCC-0.55
VCC-0.32
Data Setup Time TS (Figure 1)
OC48
Gigabit Ethernet
OC12
150
350
750
pS
pS
pS
pS
OC3
3150
Data Hold Time TH (Figure 1)
OC48
Gigabit Ethernet
OC12
150
350
750
pS
pS
pS
pS
OC3
3150
TEST DATA DC CHARACTERISTICS
Input Voltage Swing VSE (Figure 2)
Input Voltage Range
Single-Ended
Single-Ended
0.06
2.3
0.8
VCC+0.4
V
V
LVTTL DC CHARACTERISTICS
VOH Output High Voltage
VOL Output Low Voltage
IOH = -100uA (ADN2809 Sources I)
IOL = 1.0mA (ADN2809 Sinks I)
2.4
2.0
V
V
0.5
VIH Input High Voltage
VIL Input Low Voltage
V
V
0.8
50
IIH Input High Current
IIL Input Low Current
Vin = +2.4 V @ +25C
Vin = +0.5 V @ +25C
mA
mA
-500
REFCLK DC CHARACTERISTICS
Input Voltage Swing VSE (Figure 2)
Input Voltage Range
Single-Ended
Single-Ended
0.032
0
VCC
VCC
V
V
Note: (1) Recommended for Optimum Sensitivity.
Note: (2) Equipment Limitation.
ABSOLUTE MAXIMUM RATINGS
ORDERING GUIDE
Supply Voltage....................................... ....................... ...+8 V
Input Voltage (pin x or pin xto Vcc).... ........................... .TBD
Maximum Junction Temperature..............................165 deg C
Storage Temperature Range...... ........ -65 deg C to +150 deg C
Lead Temperature (Soldering 10 sec).. ....................300 deg C
ESD Rating (human body model)....... ........................... ..TBD
MODEL
TEMP
Package
Option
RANGE
Descript-ion
ADN2809XCP
-40/+85oC
-40/+85oC
LFCSP-16
LFCSP-16
2500 Pieces
CP-16
CP-16
ADN2809XCP-RL
Stress above those listed under "Absolute Maximum Ratings" may cause permanent damage
to the device. This is a stress rating only and functional operation of the device at these or any
other conditions above those indicated in the operational sections of this specification is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
REV. PrB Oct. .2001
- 3 -
ADN2809
Figure 1. Output Timing definitions
Figure 2. Signal Level Definition
Figure 3. Quantizer Signal Definitions
OC-48 2^23 LOS Curve
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
0
20000
40000
60000
80000
100000
120000
140000
160000
180000
200000
RThresh
Figure 4. LOS Comparator Trip Point Programming
REV. PrB Oct. .2001
ADN2809
Rate
Jitter Transfer
ADN2809
Jitter Tolerance
ADN2809
SONET
Spec
Margin
SONET
spec
Margin
OC48
GbE
2MHz
1MHz
370kHz
185kHz
5.4
5.4
1MHz
4.77MHz
4.77MHz
4.8
9.6
500kHz
OC12
OC3
500kHz
130kHz
93kHz
23kHz
5.4
5.6
250kHz
65kHz
4.77MHz
4.77MHz
19.2
73.4
Table I. Typical Jitter Transfer and Jitter Tolerance Performance
FIGURE 5: ADN2809 JITTER FILTERING & TRACKING BANDWIDTH
OC3_jit_tolerance
GBE_jit_tolerance
OC3_jit_transfer
GBE_jit_transfer
OC12_jit_tolerance
OC48_jit_tolerance
OC12_jit_transfer
OC48_jit_transfer
0
-.5
-1
-2
-3
-4
-5
-6
-7
-8
-9
-1.5
-2.5
-3.5
-4.5
dB
-5.5
-6.5
-7.5
-8.5
-9.5
-10
1e3
freq, Hertz
1e4
1e5
1e6
1e7
1e8
Figure 5. Tracking Bandwidth and Jitter Filtering
REV. PrB Oct. .2001
- 5 -
ADN2809
Figure 6. Recommended AC Output Termination
Figure 7. ADN2809 S11 vs. Frequency
REV. PrB Oct. .2001
- 6 -
ADN2809
optimized to give excellent wide-band jitter accommodation
since the jitter transfer function, Z(s)/X(s), provides the narrow-
band jitter filtering. See Figure 5 for a table of error transfer
bandwidths and jitter transfer bandwidths at the various data
rates.
THEORY OF OPERATION
The ADN2809 is a delay- and phase-locked loop circuit for
clock recovery and data retiming from an NRZ encoded data
stream. The phase of the input data signal is tracked by two
separate feedback loops which share a common control voltage.
A high speed delay- locked loop path uses a voltage controlled
phase shifter to track the high frequency components of input
jitter. A separate phase control loop, comprised of the vco,
tracks the low frequency components of input jitter. The initial
frequency of the vco is set by yet a third loop which compares
the vco frequency with the reference frequency and sets the
coarse tuning voltage. The jitter tracking phase-locked loop
controls the vco by the fine tuning control.
The delay- and phase- loops contribute to overall jitter
accommodation. At low frequencies of input jitter on the data
signal, the integrator in the loop filter provides high gain to track
large jitter amplitudes with small phase error. In this case the
vco is frequency modulated and jitter is tracked as in an ordinary
phase-locked loop. The amount of low frequency jitter that can
be tracked is a function of the vco tuning range. A wider tuning
range gives larger accommodation of low frequency jitter. The
internal loop control voltage remains small for small phase
errors, so the phase shifter remains close to the center of its
range and thus contributes little to the low frequency jitter
accommodation.
The delay- and phase- loops together track the phase of the input
data signal. For example, when the clock lags input data, the
phase detector drives the vco to higher frequency, and also,
increases the delay through the phase shifter: these actions both
serve to reduce the phase error between the clock and data. The
faster clock picks up phase while the delayed data loses phase.
Since the loop filter is an integrator, the static phase error will be
driven to zero.
At medium jitter frequencies, the gain and tuning range of the
vco are not large enough to track input jitter. In this case the vco
control voltage becomes large and saturates and the vco
frequency dwells at one or the other extreme of its tuning range.
The size of the vco tuning range, therefore has only a small
effect on the jitter accommodation. The delay-locked loop
control voltage is now larger, and so the phase shifter takes on
the burden of tracking the input jitter. The phase shifter range, in
UI, can be seen as a broad plateau on the jitter tolerance curve .
The phase shifter has a minimum range of 2UI at all data rates.
Another view of the circuit is that the phase shifter implements
the zero required for frequency compensation of a second order
phase-locked loop, and this zero is placed in the feedback path
and thus, does not appear in the closed-loop transfer function.
Jitter peaking in a conventional second order phase-locked loop
is caused by the presence of this zero in the closed-loop transfer
function. Since this circuit has no zero in the closed-loop
transfer, jitter peaking is minimized.
The gain of the loop integrator is small for high jitter
frequencies, so that larger phase differences are needed to make
the loop control voltage big enough to tune the range of the
phase shifter. Large phase errors at high jitter frequencies cannot
be tolerated. In this region the gain of the integrator determines
the jitter accommodation. Since the gain of the loop integrator
declines linearly with frequency, jitter accommodation is lower
with higher jitter frequency. At the highest frequencies, the loop
gain is very small, and little tuning of the phase shifter can be
expected. In this case, jitter accommodation is determined by the
eye opening of the input data, the static phase error, and the
residual loop jitter generation. The jitter accommodation is
roughly 0.5UI in this region. The corner frequency between the
declining slope and the flat region is the closed loop bandwidth
of the delay-locked loop, which is roughly 3MHz for all data
rates.
The delay- and phase- loops together simultaneously provide
wide-band jitter accommodation and narrow-band jitter filtering.
The linearized block diagram in Figure 8 shows the jitter
transfer function , Z(s)/X(s), is a second order low pass
providing excellent filtering. Note the jitter transfer has no zero,
unlike an ordinary second order phase-locked loop. This means
that the main PLL loop has low jitter peaking, see Figure 9. This
makes this circuit ideal for signal regenerator applications where
jitter peaking in a cascade of regenerators can contribute to
hazardous jitter accumulation.
The error transfer, e(s)/X(s), has the same high pass form as an
ordinary phase-locked loop. This transfer function is free to be
REV. PrB Oct. .2001
- 7 -
ADN2809
Figure 8. ADN2809 Architecture
ADN2809
Figure 9. ADN2809 Jitter Response vs. Conventional PLL
REV. PrB Oct. .2001
- 8 -
ADN2809
FUNCTIONAL DESCRIPTION
Reference Clock
The ADN2809 can accept any of the following reference clock
frequencies: 19.44 MHz, 38.88MHz, 77.76MHz at
Limiting Amplifier / Bypass & Loopback
The limiting amplifier has differential inputs (PIN/NIN), which
are normally AC coupled to the internal 50 ohm termination
(although DC coupling is possible). Input offset is factory
trimmed to achieve better than 6mV typical sensitivity with
minimal drift. The Quantizer Slicing level can be offset by +/-
100mV to mitigate the effect of ASE (amplified spontaneous
emission) noise by a differential voltage input of +/-0.8V
applied to ‘SLICEP/N’ inputs. If no adjustment
LVTTL/LVCMOS/LVPECL/LVDS levels or 155.52MHz at
LVPECL/LVDS levels via the REFCLKN/P inputs, independent
of data rate (including gigabit ethernet). The input buffer accepts
any differential signal with a peak to peak differential
amplitude of greater than 64mV (e.g. LVPECL or LVDS) or a
standard single ended low voltage TTL input, providing
maximum system flexibility. The appropriate division ratio can
be selected using the REFSEL0/1 pins, according to Table 3.
Phase noise and duty cycle of the Reference Clock are not
critical and 100ppm accuracy is sufficient.
of the slice level is needed, SLICEP/N should be tied to VCC.
When the ‘Bypass’ input is driven to a TTL high state, the
Quantizer output is connected directly to the buffers driving the
Data Out pins, thus bypassing the clock recovery circuit (Figure
10). This feature can help the system to deal with non standard
bit rates. The loopback mode can be invoked by driving the
‘LOOPEN’ pin to a TTL high state, which facilitates system
diagnostic testing. This will connect the Test inputs (TDINP/N)
to the clock and data recovery circuit (per Figure 10). The Test
inputs can be left floating, when not in use. They accept AC or
DC coupled signal levels, or AC coupled LVDS.
A crystal oscillator is also provided, as an alternative to using
the REFCLKN/P input. Details of the recommended crystal are
given in Table 3.
REFSEL must be tied to VCC when the REFCLKN/P inputs are
active, or tied to VEE when the oscillator is used. No connection
between the XO pin and REFCLK input is necessary (see figure
11). Please note that the crystal should operate in series resonant
mode, which renders it insensitive to external parasitics. No
trimming capacitors are required.
Loss of Signal (LOS) Detector
Lock Detector Operation
The receiver front end Signal Detect circuit indicates when the
input signal level has fallen below a user adjustable threshold.
The threshold is set with a single external resistor, as illustrated
in figure 4, which assumes that the slice inputs are inactive.
The lock detector monitors the frequency difference between the
VCO and the reference clock, and de-asserts the ‘Loss of Lock’
signal when the VCO is within 500ppm of center frequency.
This enables the phase loop which then maintains phase lock,
unless the frequency error exceeds 0.1%. Should this occur, the
‘Loss of Lock’ signal is re-asserted and control returns to the
frequency loop which will re-acquire, and maintain a stable
clock signal at the output. The frequency loop requires a single
external capacitor between CF1 and CF2. The capacitor
specification is given in Table 5.
If the LOS detector is used the Quantizer Slice Adjust pins must
both be tied to VCC, to avoid interaction with the LOS threshold
level. Note that it is not expected to use both LOS and Slice
Adjust at the same time: systems with optical amplifiers need
the slice adjust to evade ASE, but a loss of signal causes the
optical amplifier output to be full scale noise, thus the LOS
would not detect the failure. In this case the Loss of Lock signal
will indicate the failure.
Squelch Mode
When the ‘Squelch’ input is driven to a TTL high state, both the
clock and data outputs are set to the zero state, to suppress
downstream processing. If desired, this pin can be directly
driven by the LOS (Loss-Of-Signal) or LOL (Loss-Of-Lock)
detector outputs. If the Squelch function is not required, the pin
should be tied to VEE.
REV. PrB Oct. .2001
- 9 -
ADN2809
Figure 10. Test Modes
ADN
2809
ADN
2809
Figure 11. Reference Sources
Note:
The value of Cin required depends
on the data rate, # Consecutive
Identical Digits (CID) and amount of
Patter Dependent Jitter (PDJ) which
can be tolerated. e.g. for 1000 CID
and <0.01UI pk-pk PDJ, 100nF is
needed at OC48 and 1.6uF at OC3.
Figure 12. Data Input Terminations
REV. PrB Oct. .2001
- 10 -
ADN2809
TABLE 2. Data Rate Selection
SEL2
SEL0
SEL1
Rate
OC48
Gigabit Ethernet
OC12
OC3
OC48 * 15/14
Gigabit Ethernet * 15/14
OC12 * 15/14
OC3 * 15/14
Frequency
2.48832 GHz
1.25 GHz
622.08 MHz
155.52 MHz
2.666 GHz
1.339 GHz
666.51 MHz
166.63 MHz
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
TABLE 3. Reference Frequency Selection
REFSEL1
REFSEL0
Applied Reference Frequency
0
0
1
1
0
1
0
1
19.44 MHz
38.88 MHz
77.76 MHz
155.52 MHz
TABLE 4. Crystal Specification - see note (3)
Parameter
Mode
Value
Series Resonant
Frequency / Overall Stability
Frequency Accuracy
Temp. Stability
Ageing
19.44 MHz / +/- 50 ppm
+/- 50 ppm / total Temp. Stability
20 ohms max
ESR
(3) No additional external components are required
TABLE 5. Recommended Capacitor Specification
Parameter
Capacitance
Leakage
Value
(-40C to 85C) >3.0uF
(-40C to 85C) <80nA
>6.3V
Rating
REV. PrB Oct. .2001
- 11 -
ADN2809
ADN2809 PIN DESCRIPTION
Pin No.
2,26,28, Exposed Pad
Name
VCC
VEE
I/O
P
G
P
I/O
I/O
I
I
I
I
O
O
O
I
I
I
Level
3.3V
0V
3.3V
Description
Analog Power
Analog ground
Digital supply
LOS threshold setting resistor
Reference capacitor
Differential data signal input
Differential data signal input
Slice level
3,9,27,29, 42
20,35,36,47
VCC
1
4
5
6
7
8
THRADJ
VREGF
PIN
Analog I/O
Analog I/O
Analog current
Analog current
Analog voltage
Analog voltage
NIN
SLICEP
SLICEN
LOL
XO
XO
REFCLKN
REFCLKP
REFSEL
TDINP
TDINN
CF1
REFSEL1
REFSEL0
CF2
Slice level
10
11
12
13
14
15
17
18
21
23
24
25
30
31
32
37
38
39
40
41
44
45
48
LVTTL / LVCMOS High level indicates loss of lock
Analog output
Analog output
Any
Crystal oscillator
Crystal oscillator
Differential reference clock
Differential reference clock
Any
LVTTL / LVCMOS Reference source select
I
I
CML
CML
Analog I/O
Differential test data input
Differential test data input
Frequency loop capacitor
I/O
I
I
I/O
I
I
LVTTL / LVCMOS Reference rate select
LVTTL / LVCMOS Reference rate select
Analog I/O
Frequency loop capacitor
SEL2
SEL1
SEL0
LVTTL / LVCMOS Data rate select
LVTTL / LVCMOS Data rate select
LVTTL / LVCMOS Data rate select
I
DATAOUTN
DATAOUTP
SQUELCH
CLKOUTN
CLKOUTP
BYPASS
SDOUT
LOOPEN
O
O
I
O
O
I
CML
CML
Differential recovered data
Differential recovered data
LVTTL / LVCMOS Disable clock and data outputs
CML
CML
Differential retimed clock
Differential retimed clock
LVTTL / LVCMOS Disable clock and data recovery
LVTTL / LVCMOS High level indicates loss of signal
LVTTL / LVCMOS Enable high speed test data inputs
O
I
ADN2809 PIN CONFIGURATION
REV. PrB Oct. .2001
- 12 -
ADN2809
Mechanical Outline Dimensions
Dimensions shown in millimeters and (inches).
REV. PrB Oct. .2001
- 13 -
相关型号:
![](http://pdffile.icpdf.com/pdf1/p00024/img/page/ADN2812_126507_files/ADN2812_126507_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00024/img/page/ADN2812_126507_files/ADN2812_126507_2.jpg)
ADN2812
Continuous Rate 12.3 Mb/s to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp
ADI
![](http://pdffile.icpdf.com/pdf1/p00024/img/page/ADN2812_126507_files/ADN2812_126507_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00024/img/page/ADN2812_126507_files/ADN2812_126507_2.jpg)
ADN2812ACP
Continuous Rate 12.3 Mb/s to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp
ADI
![](http://pdffile.icpdf.com/pdf1/p00024/img/page/ADN2812_126507_files/ADN2812_126507_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00024/img/page/ADN2812_126507_files/ADN2812_126507_2.jpg)
ADN2812ACP-RL
Continuous Rate 12.3 Mb/s to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp
ADI
![](http://pdffile.icpdf.com/pdf1/p00024/img/page/ADN2812_126507_files/ADN2812_126507_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00024/img/page/ADN2812_126507_files/ADN2812_126507_2.jpg)
ADN2812ACP-RL7
Continuous Rate 12.3 Mb/s to 2.7 Gb/s Clock and Data Recovery IC with Integrated Limiting Amp
ADI
©2020 ICPDF网 联系我们和版权申明