ADV212-HD-EB [ADI]
Wavescale Video Codec; 的Wavescale视频编解码器型号: | ADV212-HD-EB |
厂家: | ADI |
描述: | Wavescale Video Codec |
文件: | 总44页 (文件大小:478K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Wavescale Video Codec
ADV212
FEATURES
APPLICATIONS
Implementation of a JPEG2000-compatible video CODEC for
video and still images through the ADV212 Wavescale
video compression/decompression engine
Identical pinout and footprint to the ADV202; and support
for all the functionality of the ADV202
Networked video and image distribution systems
Wireless video and image distribution
Image archival/retrieval
Digital CCTV and surveillance systems
Digital cinema systems
Power reduction of at least 30% compared with ADV202
JTAG/boundary scan support
Professional video editing and recording
Digital still cameras
Patented spatial ultraefficient recursive filtering (SURF)
technology for low power, low cost wavelet-based
compression
Support for both 9/7 and 5/3 wavelet transforms with up to
5 levels of transform
9/7 wavelet support for tiles up to 1.048 million samples
5/3 wavelet support for tiles up to 262,144 samples
Video interface direct support for ITU-R BT.656, SMPTE 125M
PAL/NTSC, SMPTE 274M, SMPTE 293M (525p), and ITU-R
BT.1358 (625p) or any video format with a maximum input
rate of 65 MSPS for irreversible mode or 40 MSPS for
reversible mode
Programmable tile/image size with widths of up to
4096 pixels in single-component mode; maximum
tile/image height of 4096 pixels
Ability to combine 2 or more ADV212s to support full-frame
SMPTE 274M HDTV (1080i) or SMPTE 296M (720p)
Flexible, asynchronous SRAM-style host interface support
for glueless connection to most 16-/32-bit microcontrollers
and ASICs
2.5 V or 3.3 V input/output and 1.5 V core supply
2 package and speed grade options
12 mm × 12 mm, 121-ball CSP_BGA with a speed grade of
115 MHz
Digital camcorders
GENERAL DESCRIPTION
The ADV212 Wavescale® video compression/decompression
(CODEC) is a single-chip JPEG2000 CODEC targeted for video
and high bandwidth image compression applications that can
benefit from the enhanced quality and features provided by the
JPEG2000 (J2K) ISO/IEC15444-1 image compression standard.
The part implements the computationally intensive operations
of the JPEG2000 image compression standard and provides
fully compliant code stream generation for most applications.
The dedicated video port of the ADV212 provides glueless con-
nection to common digital video standards such as ITU-R
BT.656, SMPTE 125M, SMPTE 293M (525p), ITU-R BT.1358
(625p), SMPTE 274M (1080i), and SMPTE 296M (720p). A
variety of other high speed, synchronous pixel and video
formats can also be supported by using the programmable
framing and validation signals.
The ADV212 is an upgrade version of the ADV202, which is
identical in pinout and footprint. It supports all of the func-
tionality of the ADV202 and has the following additional
options: JTAG/boundary scan support and power reduction of
at least 30% compared with the ADV202.
13 mm × 13 mm, 144-ball CSP_BGA with a speed grade of
150 MHz
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2006–2010 Analog Devices, Inc. All rights reserved.
ADV212
TABLE OF CONTENTS
Memory System.......................................................................... 25
Internal DMA Engine................................................................ 25
ADV212 Interfaces......................................................................... 26
Video Interface (VDATA Bus).................................................. 26
Host Interface (HDATA Bus) ................................................... 26
Direct and Indirect Registers.................................................... 26
Control Access Registers ........................................................... 27
Pin Configuration and Bus Sizes/Modes ................................ 27
Stage Register.............................................................................. 27
JDATA Mode............................................................................... 27
External DMA Engine ............................................................... 27
Internal Registers............................................................................ 28
Direct Registers........................................................................... 28
Indirect Registers........................................................................ 29
PLL Registers .............................................................................. 30
Hardware Boot Modes and Power Considerations ............... 31
Video Input Formats...................................................................... 32
Applications Information .............................................................. 34
Encode—Multichip Mode......................................................... 34
Decode—Multichip Master/Slave ............................................ 35
Digital Still Camera/Camcorder .............................................. 36
Encode/Decode SDTV Video Application ............................. 37
32-Bit Host Application............................................................. 38
HIPI (Host Interface—Pixel Interface) ................................... 39
JDATA Interface ......................................................................... 40
Outline Dimensions....................................................................... 41
Ordering Guide .......................................................................... 42
Features .............................................................................................. 1
Applications....................................................................................... 1
General Description......................................................................... 1
Revision History ............................................................................... 2
JPEG2000 Feature Support.............................................................. 3
Functional Block Diagram .............................................................. 3
Specifications..................................................................................... 4
Supply Voltages and Current ...................................................... 4
Input/Output Specifications........................................................ 4
RESET
Clock and
Specifications................................................ 5
Normal Host Mode—Write Operation ..................................... 6
Normal Host Mode—Read Operation ...................................... 7
DREQ DACK
/
DMA Mode—Single FIFO Write Operation .. 8
DMA Mode—Single FIFO Read Operation . 10
DREQ DACK
/
External DMA Mode—FIFO Write, Burst Mode .................. 12
External DMA Mode—FIFO Read, Burst Mode ................... 13
Streaming Mode (JDATA)—FIFO Read/Write...................... 14
VDATA Mode Timing............................................................... 15
Raw Pixel Mode Timing ............................................................ 17
JTAG Timing............................................................................... 18
Absolute Maximum Ratings.......................................................... 19
Thermal Resistance .................................................................... 19
ESD Caution................................................................................ 19
Pin Configurations and Function Descriptions ......................... 20
Theory of Operation ...................................................................... 25
Wavelet Engine ........................................................................... 25
Entropy CODECs....................................................................... 25
Embedded Processor System .................................................... 25
REVISION HISTORY
4/10—Rev. A to Rev. B
4/08—Rev. 0 to Rev. A
Change to Table 1, Static Current Parameter.................................4
Added Wavescale Information .................................... Throughout
Changes to Features Section............................................................ 1
Changes to Table 16........................................................................ 20
Changes to Video Interface (VDATA Bus) Section, Changes to
Table 17 ............................................................................................ 26
Changes to Hardware Boot Modes Section ................................ 31
Changes to Encode—Multichip Mode Section .......................... 34
10/06—Revision 0: Initial Version
Rev. B | Page 2 of 44
ADV212
The ADV212 can process images at a rate of 40 MSPS in
reversible mode and at higher rates when used in irreversible
mode. The ADV212 contains a dedicated wavelet transform
engine, three entropy CODECs, an on-board memory system,
and an embedded reduced instruction set computer (RISC)
processor that can provide a complete JPEG2000 compression/
decompression solution.
JPEG2000 FEATURE SUPPORT
The ADV212 supports a broad set of features that are included
in Part 1 of the JPEG2000 standard (ISO/IEC 15444).
Depending on the particular application requirements, the
ADV212 can provide varying levels of JPEG2000 compression
support. It can provide raw code block and attribute data
output, which allows the host software to have complete control
over generation of the JPEG2000 code stream and other aspects
of the compression process such as bit-rate control.
Additionally, the ADV212 can create a complete, fully
compliant JPEG2000 code stream (J2C) and enhanced file
formats such as JP2.
The wavelet processor supports the 9/7 irreversible wavelet
transform and the 5/3 wavelet transform in reversible and
irreversible modes. The entropy CODECs support all features
in the JPEG2000 Part 1 specification except maximum shift
region of interest (ROI).
The ADV212 operates on a rectangular array of pixel samples
called a tile. A tile can contain a complete image, up to the
maximum supported size, or some portion of an image. The
maximum horizontal tile size supported depends on the wavelet
transform selected and the number of samples in the tile.
Images larger than the ADV212 maximum tile size can be
broken into individual tiles and then sent sequentially to the
chip while maintaining a single, fully compliant JPEG2000 code
stream for the entire image.
FUNCTIONAL BLOCK DIAGRAM
WAVELET
ENGINE
PIXEL I/F
HOST I/F
EC1
EC2
EC3
PIXEL I/F
EXTERNAL
DMA CTRL
PIXEL FIFO
CODE FIFO
ATTR FIFO
INTERNAL BUS AND DMA ENGINE
EMBEDDED
RISC
PROCESSOR
SYSTEM
RAM
ROM
ADV212
Figure 1.
Rev. B | Page 3 of 44
ADV212
SPECIFICATIONS
Specifications apply to IOVDD = 2.5 V or 3.3 V over the operating temperature range, unless otherwise specified.
SUPPLY VOLTAGES AND CURRENT
Table 1.
Parameter
Mnemonic
Min
Typ
1.5
2.5
3.3
Max
Unit
V
V
V
V
DC Supply Voltage, Core
DC Supply Voltage, Input/Output
VDD
1.425
2.375
3.135
−0.3
−40
1.575
2.625
3.465
VDDI/O + 0.3
+85
IOVDD
IOVDD
VIN
T
IDD
Input Range
Operating Ambient Temperature Range in Free Air
Static Current1
Dynamic Current, Core (JCLK2 Frequency = 150 MHz)3
Dynamic Current, Core (JCLK2 Frequency = 108 MHz)
Dynamic Current, Core (JCLK2 Frequency = 81 MHz)
Dynamic Current, Input/Output
+25
60
380
280
210
40
°C
mA
mA
mA
mA
mA
440
320
290
50
1 No clock or input/output activity.
2 For a definition of JCLK, see Figure 32.
3 ADV212-150 only.
INPUT/OUTPUT SPECIFICATIONS
Table 2.
Parameter
Mnemonic
Min
2.2
1.9
Typ
Max
Unit
Test Conditions
High Level Input Voltage
VIH (3.3 V)
VIH (2.5 V)
VIL (3.3 V, 2.5 V)
VOH (3.3 V)
VOH (2.5 V)
VOL (3.3 V, 2.5 V)
IIH
IIL
IOZH
IOZL
CI
V
V
V
V
V
V
µA
µA
µA
µA
pF
pF
VDD = maximum
VDD = maximum
VDD = minimum
VDD = minimum, IOH = −0.5 mA
VDD = minimum, IOH = −0.5 mA
VDD = minimum, IOL = +2 mA
VDD = maximum, VIN = VDD
VDD = maximum, VIN = 0 V
VDD = maximum, VIN = VDD
VDD = maximum, VIN = 0 V
Low Level Input Voltage
High Level Output Voltage
0.6
2.4
2.0
Low Level Output Voltage
High Level Input Current
Low Level Input Current
High Level Three-State Leakage Current
Low Level Three-State Leakage Current
Input Pin Capacitance
0.4
1.0
1.0
1.0
1.0
8
Output Pin Capacitance
CO
8
Rev. B | Page 4 of 44
ADV212
CLOCK AND RESET SPECIFICATIONS
Table 3.
Parameter
Mnemonic
Min
13.3
10
6
Typ
Max
100
75.18
Unit
MCLK Period
tMCLK
fMCLK
tMCLKL
tMCLKH
tVCLK
ns
MHz
ns
ns
ns
MHz
ns
ns
MCLK Frequency
MCLK Width Low
MCLK Width High
VCLK Period
VCLK Frequency
VCLK Width Low
VCLK Width High
RESET Width Low
6
13.4
20
5
5
5
50
74.60
fVCLK
tVCLKL
tVCLKH
tRESET
MCLK cycles1
1 For a definition of MCLK, see Figure 32.
tMCLK
tMCLKL
tMCLKH
MCLK
VCLK
tVCLK
tVCLKL
tVCLKH
Figure 2. Input Clock
Rev. B | Page 5 of 44
ADV212
NORMAL HOST MODE—WRITE OPERATION
Table 4.
Parameter
Mnemonic
Min
Typ
Max
1.5 × JCLK + 7.01
Unit
WE to ACK, Direct Registers and FIFO Accesses
tACK (direct)
5
ns
WE to ACK, Indirect Registers
tACK (indirect)
5
2.5 × JCLK + 7.01
ns
Data Setup
Data Hold
Address Setup
Address Hold
tSD
tHD
tSA
tHA
tSC
3.0
1.5
2
2
ns
ns
ns
ns
ns
ns
ns
ns
ns
CS to WE Setup
0
CS Hold
tHC
tWH
tWL
tWCYC
0
Write Inactive Pulse Width (Minimum Time Until Next WE Pulse)
Write Active Pulse Width
Write Cycle Time
2.5 JCLK1
2.5 JCLK1
5 JCLK1
1 For a definition of JCLK, see Figure 32.
tSA
tHA
ADDR
tSC
tHC
CS
tWCYC
tWL
tWH
WE
tACK
ACK
tHD
tSD
VALID
HDATA
Figure 3. Normal Host Mode—Write Operation
Rev. B | Page 6 of 44
ADV212
NORMAL HOST MODE—READ OPERATION
Table 5.
Parameter
Mnemonic
tACK (direct)1
Min
Typ
Max
1.5 × JCLK + 7.02
Unit
RD to ACK, Direct Registers and FIFO Accesses
5
ns
RD to ACK, Indirect Registers
tACK (indirect)1
10.5 JCLK2
15.5 × JCLK + 7.02
ns
Read Access Time, Direct Registers
Read Access Time, Indirect Registers
Data Hold
tDRD (direct)
tDRD (indirect)
tHZRD
tSC
5
1.5 × JCLK + 7.02
15.5 × JCLK + 7.02
8.5
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
10.5 JCLK2
2
0
CS to RD Setup
Address Setup
CS Hold
tSA
tHC
2
0
Address Hold
tHA
tRH
tRL
2
Read Inactive Pulse Width
Read Active Pulse Width
Read Cycle Time, Direct Registers
2.5 JCLK2
2.5 JCLK2
5.0 JCLK2
tRCYC
1
ACK
RD
rising transition.
Timing relationship between
falling transition and HDATA valid is not guaranteed. HDATA valid hold time is guaranteed with respect to
ACK
RD
deassert.
A minimum of three JCLK cycles is recommended between
2 For a definition of JCLK, see Figure 32.
assert and
tSA
tHA
ADDR
tSC
tHC
CS
tRCYC
tRL
tRH
RD
tACK
ACK
tDRD
tHZRD
VALID
HDATA
Figure 4. Normal Host Mode—Read Operation
Rev. B | Page 7 of 44
ADV212
DREQ/DACK DMA MODE—SINGLE FIFO WRITE OPERATION
Table 6.
Parameter
Mnemonic
DREQPULSE
tDREQ
Min
Typ
Max
Unit
ns
DREQ Pulse Width
1 JCLK1
2.5 JCLK1
15 JCLK1
DACK Assert to Subsequent DREQ Delay
3.5 × JCLK + 8.51
ns
WE to DACK Setup
tWE
0
ns
SU
Data to DACK Deassert Setup
Data to DACK Deassert Hold
DACK Assert Pulse Width
tSU
2
ns
ns
ns
ns
ns
tHD
2
DACKLOW
DACKHIGH
2 JCLK1
2 JCLK1
0
DACK Deassert Pulse Width
WE Hold After DACK Deassert
tWE
HD
WE Assert to FSRQ Deassert (FIFO Full)
DACK to DREQ Deassert (DR × PULS = 0)
WFSRQ
1.5 JCLK1
2.5 JCLK1
2.5 × JCLK + 7.51
3.5 × JCLK + 9.01
ns
ns
tDREQ
RTN
1 For a definition of JCLK, see Figure 32.
DREQ
PULSE
tDREQ
DREQ
DACK
DACK
HIGH
DACK
LOW
tWE
tWE
SU
HD
WE
tHD
tSU
HDATA
0
1
2
3
DREQ DACK
DMA Mode for Assigned DMA Channel
Figure 5. Single Write for
/
(EDMOD0/EDMOD1[14:1] Not Programmed to a Value of 0000)
tDREQ
RTN
DREQ
DACK
DACK
HIGH
DACK
LOW
tWE
tWE
SU
HD
WE
tHD
tSU
HDATA
0
1
2
DREQ DACK
DMA Mode for Assigned DMA Channel
Figure 6. Single Write for
/
(EDMOD0/EDMOD1[14:11] Programmed to a Value of 0000)
Rev. B | Page 8 of 44
ADV212
DREQ
PULSE
tDREQ
DREQ
DACK
HIGH
DACK
LOW
DACK
WEFB
tWE
tWE
SU
HD
tHD
tSU
0
1
2
HDATA
Figure 7. Single Write Cycle for Fly-By DMA Mode
DREQ
(
Pulse Width Is Programmable)
FCS0
RD
WFSRQ
FIFO NOT FULL
FSRQ0
HDATA
FIFO FULL
0
1
2
tSU
tHD
NOT WRITTEN TO FIFO
Figure 8. Single Write Access for DCS DMA Mode
Rev. B | Page 9 of 44
ADV212
DREQ/DACK DMA MODE—SINGLE FIFO READ OPERATION
Table 7.
Parameter
Mnemonic
DREQPULSE
tDREQ
Min
Typ
Max
Unit
ns
DREQ Pulse Width
1 JCLK 1
2.5 JCLK1
15 JCLK1
DACK Assert to Subsequent DREQ Delay
3.5 × JCLK + 9.01
ns
RD to DACK Setup
DACK to Data Valid
tRD
0
ns
ns
SU
tRD
2.5
11
Data Hold
tHD
DACKLOW
DACKHIGH
1.5
ns
ns
ns
ns
DACK Assert Pulse Width
DACK Deassert Pulse Width
RD Hold after DACK Deassert
2 JCLK1
2 JCLK1
0
tRD
HD
RD Assert to FSRQ Deassert (FIFO Empty)
DACK to DREQ Deassert (DR × PULS = 0)
RDFSRQ
1.5 JCLK1
2.5 JCLK1
2.5 × JCLK + 9.01
3.5 × JCLK + 9.01
ns
ns
tDREQ
RTN
1 For a definition of JCLK, see Figure 32.
DREQ
PULSE
tDREQ
DREQ
DACK
HIGH
DACK
LOW
DACK
RD
tRD
tRD
HD
SU
tRD
tHD
HDATA
0
1
2
DREQ DACK
DMA Mode for Assigned DMA Channel
Figure 9. Single Read for
/
(EDMOD0/EDMOD1[14:11] Not Programmed to a Value of 0000)
tDREQ
RTN
DREQ
DACK
HIGH
DACK
LOW
DACK
RD
tRD
tRD
HD
SU
tRD
tHD
HDATA
0
1
2
DREQ DACK
DMA Mode for Assigned DMA Channel
Figure 10. Single Read for
/
(EDMOD0/EDMOD1[14:11] Programmed to a Value of 0000)
Rev. B | Page 10 of 44
ADV212
DREQ
PULSE
tDREQ
DREQ
DACK
DACK
HIGH
DACK
LOW
tRD
tRD
HD
SU
RDFB
tRD
tHD
HDATA
0
1
2
Figure 11. Single Read Cycle for Fly-By DMA Mode
DREQ
(
Pulse Width Is Programmable)
FCS0
RD
RDFSRQ
FIFO NOT EMPTY
FSRQ0
HDATA
FIFO EMPTY
tHD
tRD
0
1
Figure 12. Single Read Access for DCS DMA Mode
Rev. B | Page 11 of 44
ADV212
EXTERNAL DMA MODE—FIFO WRITE, BURST MODE
Table 8.
Parameter
DREQ Pulse Width1
Mnemonic
Min
Typ
Max
Unit
ns
DREQPULSE
1 JCLK 2
2.5 JCLK2
15 JCLK2
WE to DREQ Deassert (DR × PULS = 0)
tDREQ
3.5 × JCLK + 7.52
ns
RTN
DACK to WE Setup
tDACK
0
ns
SU
Data Setup
Data Hold
WE Assert Pulse Width
WE Deassert Pulse Width
WE Deassert to Next DREQ
tSU
tHD
WELOW
WEHIGH
2.5
2
1.5 JCLK2
1.5 JCLK2
2.5 JCLK2
ns
ns
ns
ns
ns
tDREQ
4.5 × JCLK + 9.02
WAIT
WE Deassert to DACK Deassert
tWE_DACK
0
ns
1 Applies to assigned DMA channel, if EDMOD0/EDMOD1[14:11] is programmed to a nonzero value.
2 For a definition of JCLK, see Figure 32.
DREQ
PULSE
tDREQ
WAIT
DREQ
DACK
tWE_DACK
tDACK
WE
HIGH
WE
LOW
SU
WE
tHD
tSU
HDATA
14
15
0
1
13
DREQ
Figure 13. Burst Write Cycle for
/DMA Mode for Assigned DMA Channel
(EDMOD0/EDMOD1[14:1] Not Programmed to a Value of 0000)
t
t
DREQRTN
DREQWAIT
DREQ
DACK
tWE_DACK
tDACK
WE
LOW
WE
HIGH
SU
WE
tHD
tSU
0
1
13
14
15
HDATA
DREQ
Figure 14. Burst Write Cycle for
/DMA Mode for Assigned DMA Channel
(EDMOD0/EDMOD1[14:11] Programmed to a Value of 0000)
tDREQ
RTN
tDREQ
WAIT
DREQ
DACK
tWE_DACK
tDACK
WE
HIGH
WE
LOW
SU
WEFB
tHD
tSU
0
1
13
14
15
HDATA
Figure 15. Burst Write Cycle for Fly-By DMA Mode
Rev. B | Page 12 of 44
ADV212
EXTERNAL DMA MODE—FIFO READ, BURST MODE
Table 9.
Parameter
DREQ Pulse Width1
Mnemonic
Min
Typ
Max
Unit
ns
DREQPULSE
1 JCLK 2
2.5 JCLK2
15 JCLK2
RD to DREQ Deassert (DR × PULS = 0)
tDREQ
3.5 × JCLK + 7.52
ns
RTN
DACK to RD Setup
RD to Data Valid
tDACK
0
ns
ns
SU
tRD
2.5
9.7
Data Hold
tHD
RDLOW
RDHIGH
2.5
ns
ns
ns
ns
RD Assert Pulse Width
RD Deassert Pulse Width
RD Deassert to Next DREQ
1.5 JCLK2
1.5 JCLK2
2.5 JCLK2
tDREQ
3.5 × JCLK + 7.52
WAIT
RD Deassert to DACK Deassert
tRD_DACK
0
ns
1 Applies to assigned DMA channel if EDMOD0 or EDMOD1 <14:11> is programmed to a nonzero value.
2 For a definition of JCLK, see Figure 32.
tDREQ
tDREQ
PULSE
WAIT
DREQ
tRD_DACK
DACK
tDACK
RD
RD
HIGH
LOW
SU
RD
tHD
0
1
13
14
15
HDATA
tRD
DREQ DACK
Figure 16. Burst Read Cycle for
/
DMA Mode for Assigned DMA Channel
(EMOD0/EDMOD1[14:11] Not Programmed to a Value of 0
tDREQ
WAIT
DREQ
DACK
tRD_DACK
tDREQ
RTN
tDACK
SU
RD
RD
HIGH
LOW
RD
tHD
0
1
13
14
15
HDATA
tRD
DREQ DACK
DMA Mode for Assigned DMA Channel
Figure 17. Burst Read Cycle for
/
(EMOD0/EDMOD1[14:11] Programmed to a Value of 0000)
tDREQ
RTN
tDREQ
WAIT
DREQ
DACK
tRD_DACK
tDACK
SU
RDFB
tHD
HDATA
0
1
13
14
15
tRD
Figure 18. Burst Read Cycle for Fly-By DMA Mode
Rev. B | Page 13 of 44
ADV212
STREAMING MODE (JDATA)—FIFO READ/WRITE
Table 10.
Parameter
Mnemonic
JDATATD
VALIDTD
HOLDSU
HOLDHD
JDATASU
JDATAHD
Min
Typ
Max
2.5 × JCLK + 9.51
2.5 × JCLK + 8.01
Unit
ns
ns
ns
ns
MCLK to JDATA Valid
1.5 JCLK1
MCLK to VALID Assert/Deassert
HOLD Setup to Rising MCLK
HOLD Hold from Rising MCLK
JDATA Setup to Rising MCLK
JDATA Hold from Rising MCLK
1.5 JCLK1
3
3
3
3
ns
ns
1 For a definition of JCLK, see Figure 32.
MCLK
JDATA
JDATA
HD
TD
JDATA
VALID
HOLD
JDATA
SU
VALID
TD
HOLD
HD
HOLD
SU
Figure 19. Streaming Mode Timing—Encode Mode JDATA Output
MCLK
JDATA
HD
JDATA
SU
JDATA
VALID
TD
VALID
HOLD
HOLD
HD
HOLD
SU
Figure 20. Streaming Mode Timing—Decode Mode JDATA Input
Rev. B | Page 14 of 44
ADV212
VDATA MODE TIMING
Table 11.
Parameter
Mnemonic
VDATATD
VDATASU
VDATAHD
HSYNCSU
HSYNCHD
HSYNCTD
VSYNCSU
VSYNCHD
VSYNCTD
FIELDSU
Min
Typ
Max
Unit
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
VCLK to VDATA Valid Delay (VDATA Output)
VDATA Setup to Rising VCLK (VDATA Input)
VDATA Hold from Rising VCLK (VDATA Input)
HSYNC Setup to Rising VCLK
HSYNC Hold from Rising VCLK
VCLK to HSYNC Valid Delay
VSYNC Setup to Rising VCLK
VSYNC Hold from Rising VCLK
VCLK to VSYNC Valid Delay
FIELD Setup to Rising VCLK
FIELD Hold from Rising VCLK
VCLK to FIELD Valid
12
4
4
3
4
12
12
12
3
4
4
3
FIELDHD
FIELDTD
SYNC DELAY
Decode Slave Data Sync Delay
(HSYNC Low to First 0xFF of EAV/SAV Code)
Decode Slave Data Sync Delay
81
VCLK cycles
VCLK cycles
101
(HSYNC Low to First Data for HVF Mode)
1 The sync delay value varies according to the application.
VCLK
VDATA
SU
VDATA
HD
VDATA (IN)
Cr
Y
Cb
Y
FF
00
00
EAV
FF
00
00
SAV
Cb
Y
Cr
Figure 21. Encode Video Mode Timing—CCIR 656 Mode
VCLK
HSYNC
HSYNC
HSYNC
Cb
SU
HD
VDATA (IN)
Cb
Y
Cr
Y
Y
Cr
Y
Figure 22. Encode Video Mode Timing—HVF Mode (HSYNC Timing)
(HSYNC Programmed for Negative Polarity)
VCLK
VSYNC
HD
VSYNC
SU
VSYNC
FIELD
SU
FIELD
HD
FIELD
Figure 23. Encode Video Mode Timing—HVF Mode (VSYNC and FIELD Timing)
(VSYNC and FIELD Programmed for Negative Polarity)
Rev. B | Page 15 of 44
ADV212
VCLK
VDATA
TD
VDATA (OUT)
HSYNC (IN)
FF
00
00
EAV
Cb
Y
HSYNC
SU
HSYNC
HD
VSYNC
HD
SYNC DELAY
VSYNC
SU
VSYNC (IN)
FIELD (IN)
FIELD
SU
Figure 24. Decode Video Mode Timing—CCIR 656 Mode, Decode Slave
(HSYNC, VSYNC, and FIELD Programmed to Negative Polarity)
VCLK
VDATA
TD
Cb
Y
Cr
Y
Cb
Y
VDATA (OUT)
HSYNC (IN)
HSYNC
SU
HSYNC
HD
VSYNC
HD
SYNC DELAY
VSYNC
SU
VSYNC (IN)
FIELD (IN)
FIELD
SU
Figure 25. Decode Video Mode Timing—HVF Mode, Decode Slave
(HSYNC, VSYNC, and FIELD Programmed to Negative Polarity)
VCLK
VDATA
TD
VDATA (OUT)
HSYNC (OUT)
VSYNC (OUT)
FF
00
Cr
00
SAV
Cb
Cb
Y
HSYNC
TD
VSYNC
TD
FIELD
TD
FIELD (OUT)
Figure 26. Decode Video Mode Timing—CCIR 656 Mode, Decode Master
(HSYNC, VSYNC, and FIELD Programmed to Negative Polarity)
VCLK
VDATA
TD
Cb
Y
Cr
Y
Cb
Y
Cb
Y
Cr
VDATA (OUT)
HSYNC (OUT)
VSYNC (OUT)
FIELD (OUT)
VSYNC
TD
FIELD
TD
Figure 27. Decode Video Mode Timing—HVF Mode, Decode Master
(HSYNC, VSYNC, and FIELD Programmed to Negative Polarity)
Rev. B | Page 16 of 44
ADV212
RAW PIXEL MODE TIMING
Table 12.
Parameter
Mnemonic
VDATATD
VDATASU
VDATAHD
VRDYTD
VFRMSU
VFRMHD
VFRMTD
Min
Typ
Max
Unit
ns
ns
ns
ns
ns
ns
ns
ns
VCLK to PIXELDATA Valid Delay (PIXELDATA Output)1
PIXELDATA Setup to Rising VCLK (PIXELDATA Input)
PIXELDATA Hold from Rising VCLK (PIXELDATA Input)
VCLK to VRDY Valid Delay
12
4
4
12
12
VFRM Setup to Rising VCLK (VFRAME Input)
VFRM Hold from Rising VCLK (VFRAME Input)
VCLK to VFRM Valid Delay (VFRAME Output)
VSTRB Setup to Rising VCLK
3
4
VSTRBSU
VSTRBHD
4
3
VSTRB Hold from Rising VCLK
ns
1 PIXELDATA is the actual data on the VDATA bus; pins and bus width depend on it but timing does not.
VCLK
VDATA
VDATA
PIXEL 2
SU
HD
PIXELDATA (IN)
PIXEL 1
PIXEL 3
VFRM
TD
SU
VFRM
HD
VFRM (IN)
VRDY
VRDY (OUT)
VSTRB
HD
VSTRB
SU
VSTRB (IN)
RAW PIXEL MODE—ENCODE
VCLK
VDATA
TD
PIXELDATA (OUT)
PIXEL 1
PIXEL 2
PIXEL 3
VFRM
VRDY
TD
TD
VFRM (OUT)
VRDY (OUT)
VSTRB
HD
VSTRB
SU
VSTRB (IN)
RAW PIXEL MODE—DECODE
Figure 28. Raw Pixel Modes
Rev. B | Page 17 of 44
ADV212
JTAG TIMING
Table 13.
Parameter
Mnemonic
TCK
TDISU
Min
134
4.0
4.0
0.0
Typ
Max
Unit
TCK Period
ns
ns
ns
ns
ns
ns
ns
TDI or TMS Setup Time
TDI or TMS Hold Time
TDO Hold Time
TDO Valid
TRS Hold Time
TRS Setup Time
TRS Pulse Width Low
TDIHD
TDOHD
TDOVALID
TRSHD
TRSSU
TRSLOW
10.0
4.0
4.0
4
TCK cycles
TCK
TDO
VALID
TDO
HD
TDO
TDI
TDI
SU
TDI
HD
TMS
TRS
TRS
HD
TRS
SU
Figure 29. JTAG Timing
Rev. B | Page 18 of 44
ADV212
ABSOLUTE MAXIMUM RATINGS
Table 14.
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Parameter
Rating
VDD − Supply Voltage, Core
IOVDD − Supply Voltage,
Input/Output
−0.3 V to +1.65 V
−0.3 V to +3.63 V
Table 15. Thermal Resistance
Package Type
θJA
θJC
Unit
°C/W
°C/W
Storage Temperature (TS)
Reflow Soldering
−65°C to +150°C
144-Ball ADV212BBCZ
121-Ball ADV212BBCZ
22.5
32.8
3.8
7.92
RoHS-Compliant, 121-Ball
RoHS-Compliant, 144-Ball
260°C (20 sec to 40 sec)
260°C (20 sec to 40 sec)
ESD CAUTION
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Rev. B | Page 19 of 44
ADV212
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
12 10
8
6
4
2
1110 9
8 7 6 5 4 3 2 1
9
7
11
5
3
1
A
B
C
D
E
F
G
H
J
A
B
C
D
E
F
G
H
J
K
L
M
K
L
BOTTOM VIEW
(Not to Scale)
BOTTOM VIEW
(Not to Scale)
Figure 30.121-Ball Pin Configuration
Figure 31. 144-Ball Pin Configuration
Table 16. Pin Function Descriptions
121-Ball Package 144-Ball Package
Pins
Used Type
Pin No.
Location
Pin No.
Location
Mnemonic
Description
119
L9
132
L12
MCLK
1
I
System Input Clock. See the PLL Registers
section.
117
L7
131
L11
RESET
1
I
Reset. Causes the ADV212 to immediately reset.
CS, RD, WE, DACK0, DACK1, DREQ0, and DREQ1
must be held high when a RESET is applied.
37 to 34,
27 to 25,
16, 15, 24,
14 to 12,
2, 6, 5
D4 to D1,
C5 to C3,
B5, B4, C2,
B3 to B1,
A2, A6, A5
64, 49 to
51, 37 to
39, 25 to
27, 13 to
15, 2 to 4
F4, E1 to E3, HDATA[15:0]
D1 to D3,
C1 to C3,
B1 to B3,
A2 to A4
16
I/O
Host Data Bus. With HDATA[23:16],
HDATA[27:24], and HDATA[31:28], these pins
make up the 32-bit wide host data bus. The
async host interface is interfaced together
with ADDR[3:0], CS, WE, RD, and ACK.
Unused HDATA pins should be pulled down
via a 10 kΩ resistor.
88, 107,
87, 97
96
H11, K8,
H10, J9
J8
108 to 106,
96
95
J12 to J10,
H12
H11
ADDR[3:0]
CS
4
1
I
I
Address Bus for the Host Interface.
Chip Select. This signal is used to qualify
addressed read and write access to the
ADV212 using the host interface.
95
J7
94
H10
WE1
1
I
Write Enable Used with the Host Interface.
RDFB2
Read Enable When Fly-By DMA Is Enabled.
Simultaneous assertion of WE and DACK low
activates the HDATA bus, even if the DMA
channels are disabled.
86
H9
84
G12
RD1
1
I
Read Enable Used with the Host Interface.
WEFB3
Write Enable When Fly-By DMA Is Enabled.
Simultaneous assertion of RD and DACK low
activates the HDATA bus, even if the DMA
channels are disabled.
Rev. B | Page 20 of 44
ADV212
121-Ball Package
144-Ball Package
Pins
Used Type
Pin No.
Location
Pin No.
Location
Mnemonic
Description
85
H8
83
G11
ACK
1
O
Acknowledge. Used for direct register accesses.
This signal indicates that the last register access
was successful. Due to synchronization issues,
control and status register accesses may incur an
additional delay; therefore, the host software
should wait for acknowledgment from the
ADV212 before attempting another register
access.
Accesses to the FIFOs (external DMA modes),
on the other hand, are guaranteed to occur
immediately, provided that space is available;
therefore, the host software does not need to
wait for ACK before attempting another register
access, provided that the timing constraints
are observed.
If ACK is shared with more than one device, ACK
should be connected to a pull-up resistor (10 k Ω)
and the PLL_HI register, Bit 4, must be set to 1.
76
63
G10
F8
82
72
G10
F12
IRQ
1
1
O
O
Interrupt. This pin indicates that the ADV212
requires the attention of the host processor.
This pin can be programmed to indicate the
status of the internal interrupt conditions
within the ADV212. The interrupt sources are
enabled via the bits in the EIRQIE register.
Data Request for External DMA Interface.
Indicates that the ADV212 is ready to
send/receive data to/from the FIFO assigned
to DMA Channel 0.
DREQ0
FSRQ0
VALID
CFG1
O
O
I
FIFO Service Request. Used in DCS-DMA
mode. Service request from the FIFO assigned
to Channel 0 (asynchronous mode).
Valid Indication for JDATA Input/Output Stream.
Polarity of this pin is programmable in the
EDMOD0 register. VALID is always an output.
Boot Mode Configuration. This pin is read on
reset to determine the boot configuration of
the on-board processor. The pin should be
tied to IOVDD through a 10 kΩ resistor.
64
F9
71
F11
DACK0
1
I
Data Acknowledge for External DMA Interface.
Signal from the host CPU, which indicates that
the data transfer request (DREQ0) has been
acknowledged and that the data transfer can
proceed. This pin must be held high at all
times if the DMA interface is not used, even if
the DMA channels are disabled.
HOLD
FCS0
I
I
External Hold Indication for JDATA Input/Output
Stream. Polarity is programmable in the
EDMOD0 register. This pin is always an input.
FIFO Chip Select. Used in DCS-DMA mode.
Chip select for the FIFO assigned to Channel 0
(asynchronous mode).
Rev. B | Page 21 of 44
ADV212
121-Ball Package
144-Ball Package
Pins
Used Type
Pin No.
Location
Pin No.
70
Location
Mnemonic
Description
65
F10
F10
DREQ1
1
O
Data Request for External DMA Interface.
Indicates that the ADV212 is ready to
send/receive data to/from the FIFO assigned
to DMA Channel 1.
FSRQ1
CFG2
O
I
FIFO Service Request. Used in DCS-DMA
mode. Service request from the FIFO assigned
to Channel 1 (asynchronous mode).
Boot Mode Configuration. This pin is read on
reset to determine the boot configuration of
the on-board processor. The pin should be
tied to DGND through a 10 kΩ resistor.
75
G9
69
F9
DACK1
1
I
Data Acknowledge for External DMA Interface.
Signal from the host CPU, which indicates that
the data transfer request (DREQ1) has been
acknowledged and data transfer can proceed.
This pin must be held high at all times unless
a DMA or JDATA access is occurring. This pin
must be held high at all times if the DMA
interface is not used, even if the DMA
channels are disabled.
FCS1
I
FIFO Chip Select. Used in DCS-DMA mode.
Chip select for the FIFO assigned to Channel 1
(asynchronous mode).
90 to 92, 78
79 to 81, 70
J2 to J4, H1
111, 97 to
99
K3, J1 to J3
HDATA[31:28]
JDATA[7:4]
4
4
I/O
Host Expansion Bus.
I/O
I/O
JDATA Bus (JDATA Mode).
Host Expansion Bus.
H2 to H4, G4 100, 85 to
87
J4, H1 to H3 HDATA[27:24]
JDATA[3:0]
I/O
I/O
JDATA Bus (JDATA Mode).
Host Expansion Bus.
69, 68,
59, 58
G3, G2,
F4, F3
88, 73 to 75 H4, G1 to G3 HDATA[23:20]
76, 61 to 63 G4, F1 to F3 HDATA[19:16]
VDATA[15:12]
4
4
57, 46 to 48 F2, E2, E3,
E4
I/O
I/O
Host Expansion Bus.
Video Data. Used only for raw pixel video
mode. Unused pins should be pulled down via
a 10 kΩ resistor.
112
113
114
L2
L3
L4
134
135
136
M2
M3
M4
SCOMM7
SCOMM6
SCOMM5
8
I/O
I/O
I/O
Serial Communication. For internal use only.
This pin should be tied low via a 10 kΩ
resistor.
Serial Communication. For internal use only.
This pin should be tied low via a 10 kΩ
resistor.
Serial Communication. This pin must be used
in multiple chip mode to align the outputs of
two or more ADV212s. For details, see the
Applications Information section. When not
used, this pin should be tied low via a 10 kΩ
resistor.
100
K1
121
L1
SCOMM4
O
LCODE Output in Encode Mode. When LCODE
is enabled, the output on this pin indicates on
a high transition that the last data-word for a
field has been read from the FIFO. For an 8-bit
interface, such as JDATA, LCODE is asserted for
four consecutive bytes and is enabled
by default.
Rev. B | Page 22 of 44
ADV212
121-Ball Package
144-Ball Package
Pins
Used Type
Pin No.
Location
Pin No.
Location
Mnemonic
Description
101
115
103
K2
122
123
109
L2
SCOMM3
I
Serial Communication. For internal use only.
This pin should be tied low via a 10 kΩ
resistor.
Serial Communication. For internal use only.
This pin should be tied low via a 10 kΩ
resistor.
Serial Communication. For internal use only.
This pin should be tied low via a 10 kΩ
resistor.
L5
K4
L3
K1
SCOMM2
SCOMM1
O
I
102
53
K3
110
K2
SCOMM0
VCLK
O
Serial Communication. This pin should be tied
low via a10 kΩ resistor.
Video Data Clock. This pin must be supplied if
video data is input/output on the VDATA bus.
E9
60
E12
1
I
44, 43, 29,
31, 32, 18
to 20, 22,
21, 7, 10
D11, D10,
C7, C9, C10, 34 to 36,
B7, B8, B9,
B11, B10,
A7, A10
46 to 48,
D10 to D12, VDATA[11:0]
C10 to C12,
B10 to B12,
12
I/O
Video Data. Unused pins should be pulled
down via a 10 kΩ resistor.
22 to 24,
9 to 11
A9 to A11
41
D8
58
E10
VSYNC
VFRM
1
I/O
Vertical Sync for Video Mode.
Raw Pixel Mode Framing Signal. When this pin
is asserted high, it indicates the first sample of
a tile.
42
54
D9
59
57
E11
E9
HSYNC
VRDY
FIELD
VSTRB
TCK
1
1
I/O
O
I/O
I
Horizontal Sync for Video Mode.
Raw Pixel Mode Ready Signal.
Field Sync for Video Mode.
Raw Pixel Mode Transfer Strobe.
JTAG Clock. If not used, this pin should be
connected to ground via a pull-down resistor.
JTAG Reset. If the JTAG is used, this pin must
be toggled low to high. If JTAG is not used,
this pin must be held low.
JTAG Mode Select. If JTAG is used, connect a
10 kΩ pull-up resistor to this pin. If not used,
this pin should be connected to ground via
a pull-down resistor.
JTAG Serial Data Input. If JTAG is used, connect
a 10 kΩ pull-up resistor to this pin. If JTAG is
not used, this pin should be connected to
ground via a pull-down resistor.
JTAG Serial Data Output. If this pin is not used,
do not connect it.
E10
94
J6
120
119
K12
K11
1
1
I
108
K9
TRS
I
I
98
J10
L6
118
141
130
K10
M9
TMS
1
1
116
TDI
I
109
K10
L10
TDO
VDD
1
O
V
3, 8, 40, 84,
120
A3, A8, D7,
H7, L10
18, 19, 30,
31, 42, 43,
102, 103,
114, 115,
126, 127,
142
B6, B7, C6,
C7, D6, D7,
J6, J7, K6,
K7, L6, L7,
M10
5/13
Positive Supply for Core.
Rev. B | Page 23 of 44
ADV212
121-Ball Package
144-Ball Package
Pins
Used Type
Pin No.
Location
Pin No.
Location
Mnemonic
Description
1, 4, 9,11,
23, 33, 39,
45, 49 to
51, 55, 56,
60 to 62,
66, 67, 71
to 73, 77,
83, 89, 99,
110, 111,
118, 121
A1, A4, A9,
A11, C1,
C11, D6, E1, 32, 41, 44,
1, 5 to 8, 12, A1, A5 to
DGND
29/45 GND
Ground.
17, 20, 29,
A8, A12, B5,
B8, C5, C8,
E5 to E7,
E11, F1, F5
to F7, F11,
G1, G5 to
G7, G11,
H6, J1, J11,
K11, L1, L8,
L11
52 to 56, 65 D5, D8, E4
to 68, 77 to
81, 89 to
93, 101,
104, 105,
113, 116,
125, 128,
133, 137 to
140, 143,
144
to E8, F5 to
F8, G5 to
G9, H5 to
H9, J5, J8,
J9, K5, K8,
L5, L8, M1,
M5 to M8,
M11, M12
17, 28, 30,
38, 52, 74,
82, 93, 104
to 106
B6, C6, C8,
D5, E8, G8,
H5, J5, K5
to K7
16, 21, 28,
33, 40, 45,
112, 117,
124, 129
B4, B9, C4,
C9, D4, D9,
K4, K9, L4,
L9
IOVDD
11/10
V
Positive Supply for Input/Output.
1
RD
WE
signals (for DMA only) are reversed. This allows a host to move data between an external device and the ADV212
In fly-by mode DMA, the functions of the
with the use of a single strobe.
and
2
3
RDFB
WEFB
WE
signal (
In encode mode with fly-by DMA, the host can use the
In decode mode with fly-by DMA, the host can use the
pin) to simultaneously read from the ADV212 and write to an external device such as memory.
RD
signal ( pin) to simultaneously read from the external device and write to the ADV212.
Rev. B | Page 24 of 44
ADV212
THEORY OF OPERATION
The input video or pixel data is passed to the ADV212 pixel
interface, and samples are deinterleaved and passed to the
wavelet engine, which decomposes each tile or frame into
subbands using the 5/3 or 9/7 filters. The resultant wavelet
coefficients are then written to the internal memory. The
entropy CODECs code the image data so that it conforms
to the JPEG2000 standard. An internal DMA provides high
bandwidth memory-to-memory transfers, as well as high
performance transfers between functional blocks and memory.
ENTROPY CODECS
The entropy CODEC block performs context modeling and
arithmetic coding on a code block of the wavelet coefficients.
Additionally, this block also performs the distortion metric
calculations during compression that are required for optimal
rate and distortion performance. Because the entropy coding
process is the most computationally intensive operation in the
JPEG2000 compression process, three dedicated hardware
entropy CODECs are provided on the ADV212.
WAVELET ENGINE
EMBEDDED PROCESSOR SYSTEM
The ADV212 provides a dedicated wavelet transform processor
based on the Analog Devices, Inc., proven and patented SURF®
technology. This processor can perform up to six wavelet
decomposition levels on a tile. In encode mode, the wavelet
transform processor takes in uncompressed samples, performs
the wavelet transform and quantization, and writes the wavelet
coefficients in all frequency subbands to the internal memory.
Each of these subbands is further broken down into code
blocks. The code-block dimensions can be user defined and are
used by the wavelet transform processor to organize the wavelet
coefficients into code blocks when writing to the internal
memory. Each completed code block is then entropy coded by
one of the entropy CODECs.
The ADV212 incorporates an embedded 32-bit RISC processor.
This processor is used for configuration, control, and manage-
ment of the dedicated hardware functions, as well as for parsing
and generating the JPEG2000 code stream. The processor
system includes memory for both the program and data
memory, the interrupt controller, the standard bus interfaces,
and other hardware functions such as timers and counters.
MEMORY SYSTEM
The main function of the memory system is to manage wavelet
coefficient data, interim code-block attribute data, and
temporary workspace for creating, parsing, and storing the
JPEG2000 code stream. The memory system can also be used
for the program and data memory for the embedded processor.
In decode mode, wavelet coefficients are read from internal
memory and recomposed into uncompressed samples.
INTERNAL DMA ENGINE
The internal DMA engine provides high bandwidth memory-
to-memory transfers, as well as high performance transfers
between memory and functional blocks. This function is critical
for high speed generation and parsing of the code stream.
Rev. B | Page 25 of 44
ADV212
ADV212 INTERFACES
There are several possible ways to interface to the ADV212
using the VDATA bus and the HDATA bus or the HDATA bus
alone.
The control and data channel bus widths can be specified
independently, which allows the ADV212 to support applica-
tions that require control and data buses of different widths.
The host interface is used for configuration, control, and status
functions, as well as for transferring compressed data streams.
It can be used for uncompressed data transfers in certain
modes. The host interface can be shared by as many as three
concurrent data streams in addition to control and status
communications. The data streams are
VIDEO INTERFACE (VDATA BUS)
The video interface can be used in applications in which
uncompressed pixel data is on a separate bus from compressed
data. For example, it is possible to use the VDATA bus to input
uncompressed video while using the HDATA bus to output the
compressed data. This interface is ideal for applications
requiring very high throughput, such as live video capture.
•
•
Uncompressed tile data (for example, still image data)
Fully encoded JPEG2000 code stream (or unpackaged code
blocks)
Optionally, the ADV212 interlaces ITU-R BT.656 resolution
video on the fly prior to wavelet processing, which yields
significantly better compression performance for temporally
coherent frame-based video sources. Additionally, high
definition digital video such as SMPTE 274M (1080i) is
supported using two or more ADV212 devices.
•
Code-block attributes
The ADV212 uses big endian byte alignment for 16- and 32-bit
transfers. All data is left-justified (MSB).
Pixel Input on the Host Interface
The video interface can support video data or still image data
input/output in 8-/10-/12-bit formats, in YCbCr format, or in
single input mode. YCbCr data must be in 4:2:2 format. When
operating in raw pixel mode, only one component can be
processed by a single ADV212.
Pixel input on the host interface supports 8-/10-/12-/14-/16-bit
raw pixel data formats. It can be used for pixel (still image)
input/output or compressed video output. Because there are no
timing codes or sync signals associated with the input data on
the host interface, dimension registers and internal counters are
used and must be programmed to indicate the start and end of
the frame.
Video data can be input/output in several different modes on
the VDATA bus, as described in Table 17. In all these modes,
the pixel clock must be input on the VCLK pin.
Host Bus Configuration
Table 17. Video Input/Output Modes
For maximum flexibility, the host interface provides several
configurations to meet particular system requirements. The
default bus mode uses the same pins to transfer control, status,
and data to and from the ADV212. In this mode, the ADV212
can support 16- and 32-bit control transfers and 8-/16-/32-bit
data transfers. The size of these buses can be selected independ-
ently, allowing, for example, a 16-bit microcontroller to
configure and control the ADV212 while still providing 32-bit
data transfers to an ASIC or external memory system.
Mode
Description
EAV/SAV Accepts video with embedded EAV/SAV codes, where
the YCbCr data is interleaved onto a single bus.
HVF
Accepts video data accompanied by separate H, V,
and F signals, where YCbCr data is interleaved onto
a single bus.
Raw
Video
Used for still picture data and nonstandard video.
VFRM, VSTRB, and VRDY are used to program the
dimensions of the image. When operating in raw
pixel mode, only one component can be processed
by a single ADV212.
DIRECT AND INDIRECT REGISTERS
To minimize pin count and cost, the number of address pins
is limited to four, which yields a total direct address space of
16 locations. These locations are most commonly used by the
external controller and are, therefore, accessible directly. All
other registers in the ADV212 can be accessed indirectly
through the IADDR and IDATA registers.
HOST INTERFACE (HDATA BUS)
The ADV212 can connect directly to a wide variety of host
processors and ASICs using an asynchronous SRAM-style
interface, DMA accesses, or streaming mode (JDATA) interface.
The ADV212 supports 16- and 32-bit buses for control and
8-/16-/32-bit buses for data transfer.
Rev. B | Page 26 of 44
ADV212
has been provided to allow 16-bit hosts to access these registers
and memory locations using the stage register, which is accessed
as a 16-bit register using HDATA[15:0]. Before writing to the
desired register, the stage register must be written with the
upper (most significant) half-word.
CONTROL ACCESS REGISTERS
With the exception of the indirect address and data registers
(IADDR and IDATA), all control/status registers in the
ADV212 are 16 bits wide and are half-word (16-bit) addressable
only. When 32-bit host mode is enabled, the upper 16 bits of the
HDATA bus are ignored on writes and return all zeros on reads
of 16-bit registers.
When the host subsequently writes the lower half-word to the
desired control register, HDATA is combined with the prev-
iously staged value to create the required 32-bit value that is
written. When a register is read, the upper (most significant)
half-word is returned immediately on HDATA, and the lower
half-word can be retrieved by reading the stage register on a
subsequent access.
PIN CONFIGURATION AND BUS SIZES/MODES
The ADV212 provides a wide variety of control and data
configurations, which allows it to be used in many applications
with little or no glue logic. The modes described in this section
are configured using the BUSMODE register. In this section,
host refers to normal addressed accesses (
and data refers to external DMA accesses (
Note that the stage register does not apply to the three data
channels (pixel, code, and ATTR). These channels are always
accessed at the specified data width and do not require the use
of the stage register.
CS RD WE
/
/
/ADDR)
DREQ DACK
/
).
32-Bit Host/32-Bit Data
In this mode, the HDATA[31:0] pins provide full 32-bit wide
data access to the pixel channel, code channel, and ATTR
channel FIFOs.
JDATA MODE
JDATA mode is typically used only when the dedicated video
interface (VDATA) is also enabled. This mode allows code
stream data (compressed data compliant with JPEG2000) to be
input or output on a single dedicated 8-bit bus (JDATA[7:0]).
The bus is always an output during compression operations and
an input during decompression.
16-Bit Host/32-Bit Data
This mode allows a 16-bit host to configure and communicate
with the ADV212 while allowing 32-bit accesses to the pixel,
xode, and ATTR FIFOs using the external DMA capability.
A 2-pin handshake is used to transfer data over this synchron-
ous interface. VALID is used to indicate that the ADV212 is
ready to provide or accept data and is always an output. HOLD
is always an input and is asserted by the host if it cannot accept/
provide data. For example, JDATA mode allows real-time appli-
cations, in which pixel data is input over the VDATA bus while
the compressed data stream is output over the JDATA bus.
All addressed host accesses are 16 bits and, therefore, use only
the HDATA[15:0] pins. The HDATA[31:16] pins provide the
additional 16 bits necessary to support the 32-bit external DMA
transfers to and from the FIFOs only.
16-Bit Host/16-Bit Data
This mode uses 16-bit transfers if used for host or external
DMA data transfers.
EXTERNAL DMA ENGINE
16-Bit Host/8-Bit Data (JDATA Bus Mode)
The external DMA interface is provided to enable high
bandwidth data input/output between an external DMA
controller and the ADV212 data FIFOs. Two independent DMA
channels can each be assigned to any one of the three data
stream FIFOs (pixel, code, and ATTR).
This mode provides separate data input/output and host
control interface pins. Host control accesses are 16 bits and use
HDATA[15:0], whereas the dedicated data bus uses JDATA[7:0].
JDATA uses a valid/hold synchronous transfer protocol. The
direction of the JDATA bus is determined by the mode of the
ADV212. If the ADV212 is encoding (compression), JDATA[7:0]
is an output. If the ADV212 is decoding (decompression),
JDATA[7:0] is an input. Host control accesses remain asynchro-
nous. See also the JDATA Mode section.
The controller supports asynchronous DMA using a data-
DREQ DACK
request/data-acknowledge (
/
) protocol in either
single or burst access mode. Additional functionality is
provided for single address compatibility (fly-by) mode and
dedicated chip select (DCS) mode.
STAGE REGISTER
Because the ADV212 contains both 16-bit and 32-bit registers
and its internal memory is mapped as 32-bit data, a mechanism
Rev. B | Page 27 of 44
ADV212
INTERNAL REGISTERS
This section describes the internal registers of the ADV212.
The direct registers are accessed over the ADDR[3:0],
CS RD WE ACK
HDATA[31:0],
,
,
, and
pins.
DIRECT REGISTERS
The host must first initialize the direct registers before
any application-specific operation can be implemented.
The ADV212 has 16 direct registers, as listed in Table 18.
Table 18. Direct Registers
Address
0x00
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x08
0x09
0x0A
0x0B
0x0C
0x0D
0x0E
0x0F
Name
Description
Pixel
Code
ATTR
Pixel FIFO access register
Compressed code stream access register
Attribute FIFO access register
Reserved
Reserved
CMDSTA
EIRQIE
EIRQFLG
SWFLAG
BUSMODE
MMODE
Stage
IADDR
IDATA
Boot
PLL_HI
PLL_LO
Command stack
External interrupt enabled
External interrupt flags
Software flag register
Bus mode configuration register
Miscellaneous mode register
Staging register
Indirect address register
Indirect data register
Boot mode register
PLL control register, high byte
PLL control register, low byte
Rev. B | Page 28 of 44
ADV212
INDIRECT REGISTERS
In certain modes, such as custom-specific input format or HIPI
mode, indirect registers must be accessed by the user through
the IADDR and IDATA registers. The indirect register address
space starts at Internal Address 0xFFFF0000.
Both 32-bit and 16-bit hosts can access the indirect registers:
32-bit hosts use the IADDR and IDATA registers, and 16-bit
hosts use the IADDR, IDATA, and stage registers.
Table 19. Indirect Registers
Address
Name
Description
0xFFFF0400
0xFFFF0404
0xFFFF0408
0xFFFF040C
0xFFFF0410
0xFFFF0414
0xFFFF0418
0xFFFF041C
0xFFFF0420
0xFFFF0424
0xFFFF0428
0xFFFF042C
0xFFFF0430
0xFFFF0440
0xFFFF0444
0xFFFF0448
0xFFFF044C
0xFFFF1408
0xFFFF140C
0xFFFF1410
0xFFFF1414
0xFFFF1418
0xFFFF141C
0xFFFF1420
0xFFFF1424 to 0xFFFF14FC
PMODE1
COMP_CNT_STATUS
LINE_CNT_STATUS
XTOT
Pixel/video format
Horizontal count
Vertical count
Total samples per line
Total lines per frame
Start line of Field 0 [F0]
Start line of Field 1 [F1]
Start of active video Field 0 [F0]
Start of active video Field 1 [F1]
End of active video Field 0 [F0]
End of active video Field 1 [F1]
Horizontal start of active video
Horizontal end of active video
Master/slave delay
Reserved
Pixel Mode 2
Video mode
External DMA Mode Register 0
External DMA Mode Register 1
FIFO threshold for pixel FIFO
Reserved
YTOT
F0_START
F1_START
V0_START
V1_START
V0_END
V1_END
PIXEL_START
PIXEL_END
MS_CNT_DEL
Reserved
PMODE2
VMODE
EDMOD0
EDMOD1
FFTHRP
Reserved
Reserved
FFTHRC
FFTHRA
Reserved
Reserved
FIFO threshold for code FIFO
FIFO threshold for ATTR FIFO
Reserved
Rev. B | Page 29 of 44
ADV212
PLL REGISTERS
The ADV212 uses the PLL_HI and PLL_LO direct registers to
configure the PLL. Any time the PLL_LO register is modified,
the host must wait at least 20 µs before reading from or writing
to another register. If this delay is not implemented, erratic
behavior may result.
•
For MCLK frequencies greater than 50 MHz, the input
clock divider must be enabled; that is, IPD must be set
to 1. IPD cannot be enabled for MCLK frequencies
below 20 MHz.
Deinterlace modes require JCLK ≥ 4 × MCLK.
It is not recommended to use an LLC output from a video
decoder as a clock source for MCLK.
•
•
MCLK is the input clock to the ADV212 PLL and is used to
generate the internal JCLK (JPEG2000 processor clock) and
HCLK (embedded CPU clock).
To achieve the lowest power consumption, an MCLK frequency
of 27 MHz is recommended for a standard definition CCIR 656
input. The PLL circuit is recommended to have a multiplier of
3. This sets JCLK and HCLK to 81 MHz.
The PLL can be programmed to have any possible final
multiplier value as long as
•
•
•
JCLK > 50 MHz and < 150 MHz (144-pin version).
JCLK > 50 MHz and < 115 MHz (121-pin version).
HCLK < 81 MHz (121-pin version) or HCLK < 108 MHz
(144-pin version).
BYPASS
IPD
MCLK
PHASE
JCLK
HCLK
÷2
LPF
VCO
÷2
÷2
DETECT
•
•
•
JCLK ≥ 2 × VCLK for single-component input.
JCLK ≥ 2 × VCLK for YCbCr [4:2:2] input.
In JDATA mode (JDATA), JCLK must be 4 × MCLK
or higher.
÷2
÷2
÷PLLMULT
HCLKD
LFB
•
The maximum burst frequency for external DMA modes is
≤ 0.36 JCLK.
Figure 32. PLL Architecture and Control Functions
Table 20. Recommended PLL Register Settings
IPD
LFB
PLLMULT
HCLKD
HCLK
JCLK
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
N
N
N
N
N
N
N
N
0
1
0
1
0
1
0
1
N × MCLK
N × MCLK/2
2 × N × MCLK
N × MCLK
N × MCLK/2
N × MCLK/4
N × MCLK
N × MCLK
N × MCLK
2 × N × MCLK
2 × N × MCLK
N × MCLK/2
N × MCLK/2
N × MCLK
N × MCLK/2
N × MCLK
Table 21. Recommended Values for PLL_HI and PLL_LO Registers
Video Standard
CLKIN Frequency on MCLK
PLL_HI
0x0008
0x0008
0x0008
0x0008
PLL_LO
0x0004
0x0004
0x0004
0x0084
SMPTE 125M or ITU-R BT.656 (NTSC or PAL)
SMPTE 293M (525p)
ITU-R BT.1358 (625p)
27 MHz
27 MHz
27 MHz
74.25 MHz
SMPTE 274M (1080i)
Rev. B | Page 30 of 44
ADV212
There is no special power sequencing requirement for VDD and
IOVDD.
HARDWARE BOOT MODES AND POWER
CONSIDERATIONS
It is strongly recommended that the user place a small decoup-
ling cap close to every power pin and at least one bulk cap on
each supply.
The boot mode can be configured via hardware using the CFG
pins or via software. The first boot mode after power-up is set
by the CFG pins and should always be as described in the pin
listing. CFG1 is tied to IOVDD through a 10 k resistor and
CFG2 is tied to GND through a 10 k resistor.
Rev. B | Page 31 of 44
ADV212
VIDEO INPUT FORMATS
The ADV212 supports a wide variety of formats for uncom-
pressed video and still image data. The actual interface and bus
modes selected for transferring uncompressed data dictates the
allowed size of the input data and the number of samples
transferred with each access.
YCbCr formats or single component format. All formats can
support less precision than provided by specifying the actual
data width/precision in the PMODE register.
The maximum allowable data input rate is limited by using
irreversible or reversible compression modes and the data width
(or precision) of the input samples. See Table 22 and Table 24 to
determine the maximum data input rate.
The host interface can support 8-/10-/12-/14-/16-bit data
formats. The video interface can support video data or still
image data input/output. Supported formats are 8-/10-/12-bit
Table 22. Maximum Pixel Data Input Rates (144-Ball Package)
Input Rate Limit
Approximate Minimum
Output Rate, Compressed
Data2 (Mbps)
Approximate Maximum
Output Rate, Compressed
Data3 (Mbps)
Active Resolution
Interface
Compression Mode
Irreversible
Irreversible
Irreversible
Irreversible
Reversible
Input Format
8-bit data
10-bit data
12-bit data
16-bit data
8-bit data
(MSPS)1
HDATA
45
45
45
45
40
32
27
23
65
65
65
40
32
27
130
130
130
130
130
130
130
130
130
130
130
130
130
130
200
200
200
200
200
200
200
200
200
200
200
200
200
200
Reversible
Reversible
Reversible
Irreversible
Irreversible
Irreversible
Reversible
Reversible
Reversible
10-bit data
12-bit data
14-bit data
8-bit data
10-bit data
12-bit data
8-bit data
VDATA
10-bit data
12-bit data
1 Input rate limits for HDATA may be less for certain applications depending on input picture size and content, host interface settings, and DMA transfer settings.
2 Minimum guaranteed sustained output rate or minimum sustainable compression rate (input rate/minimum peak output rate).
3 Maximum peak output rate; an output rate above this value is not possible.
Table 23. Maximum Pixel Data Input Rates (121-Ball Package)
Input Rate Limit
Active Resolution
(MSPS)1
Approx Min Output Rate,
Compressed Data2
(Mbps)
Approx Max Output Rate,
Compressed Data3
(Mbps)
Interface
Compression Mode
Irreversible
Irreversible
Irreversible
Irreversible
Reversible
Reversible
Reversible
Reversible
Irreversible
Irreversible
Irreversible
Reversible
Reversible
Reversible
Input Format
8-bit data
10-bit data
12-bit data
16-bit data
8-bit data
10-bit data
12-bit data
14-bit data
8-bit data
10-bit data
12-bit data
8-bit data
HDATA
34
34
34
34
30
24
20
17
48
48
48
30
24
20
98
98
98
98
98
98
98
98
98
98
98
98
98
98
150
150
150
150
150
150
150
150
150
150
150
150
150
150
VDATA
10-bit data
12-bit data
1 Input rate limits for HDATA may be less for certain applications depending on input picture size and content, host interface settings, and DMA transfer settings.
2 Minimum guaranteed sustained output rate or minimum sustainable compression rate (input rate/minimum peak output rate).
3 Maximum peak output rate; an output rate above this value is not possible.
Rev. B | Page 32 of 44
ADV212
Table 24. Maximum Supported Tile Width for Data Input on HDATA and VDATA Buses
Compression Mode
Input Format
Tile/Precinct Maximum Width
9/7i
9/7i
9/7i
5/3i
5/3i
5/3i
5/3r
5/3r
5/3r
Single-component
Two-component
Three-component
Single-component
Two-component
Three-component
Single-component
Two-component
Three-component
2048
1024 each
1024 (Y)
4096
2048 (each)
2048 (Y)
4096
2048
1024
Rev. B | Page 33 of 44
ADV212
APPLICATIONS INFORMATION
In decode mode, a master/slave configuration (as shown in
Figure 34) or a slave/slave configuration can be used to
synchronize the outputs of the two ADV212s.
This section describes typical video applications for the
ADV212 JPEG2000 video processor.
ENCODE—MULTICHIP MODE
Applications that have two separate VDATA outputs sent to an
FPGA or buffer before they are sent to an encoder do not
require synchronization at the ADV212 outputs.
Due to the data input rate limitation (see Table 22), an 1080i
application requires at least two ADV212s to encode or decode
full-resolution 1080i video. In encode mode, the ADV212
accepts Y and CbCr data on separate buses. An encode example
is shown in Figure 33.
32-BIT HOST CPU
ADV212_1_SLAVE
74.25MHz
OSC
10-BIT SD/HD
VIDEO
DECODER
DATA[31:0]
ADDR[3:0]
CS
HDATA[31:0]
ADDR[3:0]
CS
1080i
VIDEO IN
RD
RD
VCLK
MCLK
LLC
ACK
ACK
WE
WR
Y
VDATA[11:2]
Y[9:0]
C[9:0]
IRQ
IRQ
DREQ
DACK
DREQ
DACK
FIELD
VSYNC
HSYNC
CbCr
GPIO
SCOMM[5]
ADV212_2_SLAVE
HDATA[31:0]
ADDR[3:0]
VCLK
MCLK
CS
RD
CS
RD
HSYNC
VSYNC
FIELD
WR
ACK
IRQ
WE
ACK
IRQ
CbCr
VDATA[11:2]
DREQ
DACK
DREQ
DACK
SCOMM[5]
Figure 33. Encode—Multichip Application
Rev. B | Page 34 of 44
ADV212
In a slave/slave configuration, the common HVF for both
ADV212s is generated by an external house sync, and each
SCOMM5 is connected to the same GPIO output on the host.
DECODE—MULTICHIP MASTER/SLAVE
In a master/slave configuration, it is expected that the master
HVF outputs are connected to the slave HVF inputs and that
each SCOMM5 pin is connected to the same GPIO on the host.
SWIRQ1, Software Interrupt 1 in the EIRQIE register, must be
unmasked on both devices to enable multichip mode.
74.25MHz
OSC
32-BIT HOST CPU
10-BIT SD/HD
ADV212_1_MASTER
HDATA[31:0]
VIDEO
ENCODER
DATA[31:0]
ADDR[3:0]
CS
ADDR[3:0]
CS
RD
RD
1080i
VIDEO OUT
VCLK
MCLK
CLKIN
WR
WE
ACK
ACK
IRQ
Y
Y
VDATA[11:2]
Y[9:0]
C[9:0]
IRQ
DREQ
DACK
DREQ
DACK
FIELD
VSYNC
HSYNC
CbCr
GPIO
SCOMM[5]
ADV212_2_SLAVE
HDATA[31:0]
ADDR[3:0]
VCLK
MCLK
CS
RD
CS
RD
HSYNC
VSYNC
FIELD
WR
ACK
IRQ
WE
ACK
IRQ
CbCr
VDATA[11:2]
DREQ
DACK
DREQ
DACK
SCOMM[5]
Figure 34. Decode—Multichip Master/Slave Application
Rev. B | Page 35 of 44
ADV212
DIGITAL STILL CAMERA/CAMCORDER
Figure 35 is a typical configuration for a digital camera or camcorder.
FPGA
AD9843A
D[9:0]
ADV212
MCLK
10
DATA INPUTS[9:0]
VCLK
16-BIT
HOST CPU
VFRM
VRDY
VSTRB
SDATA
SCK
SL
SERIAL DATA
SERIAL CLK
SERIAL EN
HDATA[15:0]
DATA[15:0]
ADDR[3:0]
CS
ADDR[3:0]
CS
RD
RD
WE
WE
PIXEL OUT[9:0]
VDATA[15:6]
ACK
IRQ
ACK
IRQ
Figure 35. Digital Still Camera/Camcorder Encode Application for 10-Bit Pixel Data Using Raw Pixel Mode
Rev. B | Page 36 of 44
ADV212
ENCODE/DECODE SDTV VIDEO APPLICATION
Figure 36 shows two ADV212 chips using a 10-bit CCIR 656 in normal host mode.
ENCODE MODE
ADV212
10-BIT
VIDEO
DECODER
VIDEO IN
VDATA[11:2]
P[19:10]
32-BIT
HOST CPU
VCLK
MCLK
LLC1
DATA[31:0]
INTR
HDATA[31:0]
IRQ
27MHz
OSC
ADDR[3:0]
CS
ADDR[3:0]
CS
RD
RD
WE
WE
ACK
ACK
DECODE MODE
ADV212
10-BIT
VIDEO
ENCODER
VIDEO OUT
VDATA[11:2]
VCLK
P[9:0]
CLKIN
32-BIT
HOST CPU
MCLK
DATA[31:0]
INTR
HDATA[31:0]
IRQ
27MHz
OSC
ADDR[3:0]
CS
ADDR[3:0]
CS
RD
RD
WE
WE
ACK
ACK
Figure 36. Encode/Decode—SDTV Video Application
Rev. B | Page 37 of 44
ADV212
32-BIT HOST APPLICATION
Figure 37 shows two ADV212 chips using a 10-bit CCIR 656 in normal host mode.
FPGA
ADV7189
ADV212
10-BIT
VIDEO
VIDEO IN
DECODER
DREQ0
DACK0
DREQ0
DACK0
VDATA[11:2]
P[19:10]
DATA[31:0]
HDATA[31:0]
LLC1
VCLK
MCLK
27MHz
OSC
32-BIT
HOST CPU
DATA[31:0]
IRQ
ADDR[3:0]
CS
IRQ
ADDR[3:0]
CS
RD
RD
WE
WE
ACK
ACK
ENCODE MODE
FPGA
10-BIT
ADV212
VIDEO
ENCODER
VIDEO OUT
DREQ0
DACK0
DREQ0
DACK0
VDATA[11:2]
VCLK
P[9:0]
CLKIN
DATA[31:0]
HDATA[31:0]
MCLK
31-BIT
HOST CPU
27MHz
OSC
DATA[31:0]
IRQ
ADDR[3:0]
CS
IRQ
ADDR[3:0]
CS
RD
RD
WE
WE
ACK
ACK
DECODE MODE
Figure 37. Encode/Decode 32-Bit Host Application
Rev. B | Page 38 of 44
ADV212
HIPI (HOST INTERFACE—PIXEL INTERFACE)
Figure 38 is a typical configuration using HIPI mode.
ADV212
Y0/G0<MSB>
Y0/G0<6>
Y0/G0<5>
Y0/G0<4>
Y0/G0<3>
Y0/G0<2>
Y0/G0<1>
Y0/G0<0>
Cb0/G1<MSB>
Cb0/G1<6>
Cb0/G1<5>
Cb0/G1<4>
Cb0/G1<3>
Cb0/G1<2>
Cb0/G1<1>
Cb0/G1<0>
Y1/G2<MSB>
Y1/G2<6>
Y1/G2<5>
Y1/G2<4>
Y1/G2<3>
Y1/G2<2>
Y1/G2<1>
Y1/G2<0>
Cr0/G3<MSB>
Cr0/G3<6>
Cr0/G3<5>
Cr0/G3<4>
Cr0/G3<3>
Cr0/G3<2>
Cr0/G3<1>
Cr0/G3<0>
HDATA<31>
HDATA<30>
HDATA<29>
HDATA<28>
HDATA<27>
HDATA<26>
HDATA<25>
HDATA<24>
HDATA<23>
HDATA<22>
HDATA<21>
HDATA<20>
HDATA<19>
HDATA<18>
HDATA<17>
HDATA<16>
HDATA<15>
HDATA<14>
HDATA<13>
HDATA<12>
HDATA<11>
HDATA<10>
HDATA<9>
HDATA<8>
HDATA<7>
HDATA<6>
HDATA<5>
HDATA<4>
HDATA<3>
HDATA<2>
HDATA<1>
HDATA<0>
32-BIT HOST
DATA<31:0>
CS
RD
CS
RD
WR
ACK
IRQ
WE
ACK
IRQ
DREQ
DACK
DREQ0
DACK0
COMPRESSED
DATA PATH
DREQ
DACK
DREQ1
DACK1
RAW PIXEL
DATA PATH
74.25MHz
MCLK
Figure 38. Host Interface—Pixel Interface Mode
Rev. B | Page 39 of 44
ADV212
JDATA INTERFACE
Figure 39 shows a typical configuration using JDATA with a dedicated JDATA output, 16-bit host, and 10-bit CCIR 656.
FPGA
ADV212
ADV7189
P[19:10]
YCrCb
JDATA[7:0] VDATA[11:2]
HOLD
VIDEO IN
FIELD
VALID
FIELD
VS
HS
VSYNC
HSYNC
16-BIT
HOST CPU
VCLK
LLC1
DATA[15:0]
HDATA[15:0]
IRQ
ADDR[3:0]
CS
IRQ
ADDR[3:0]
27MHz
OSC
MCLK
CS
RD
RD
WE
WE
ACK
ACK
Figure 39. JDATA Application
Rev. B | Page 40 of 44
ADV212
OUTLINE DIMENSIONS
A1 CORNER
INDEX AREA
12.20
12.00 SQ
11.80
11 10
7 1
9 8 6
4 2
5 3
A
B
C
D
E
F
BALL A1
CORNER
10.00
BSC SQ
G
H
J
1.00
BSC
K
L
BOTTOM VIEW
DETAIL A
TOP VIEW
DETAIL A
*
1.85
1.71
1.40
*
1.31
1.21
1.11
0.50 NOM
0.30 MIN
0.20
COPLANARITY
0.70
0.60
0.50
SEATING
PLANE
BALL DIAMETER
*COMPLIANT WITH JEDEC STANDARDS MO-192-ABD-1 WITH
EXCEPTION TO PACKAGE HEIGHT AND THICKNESS.
Figure 40. 121-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
(BC-121-1)
Dimensions shown in millimeters
A1 CORNER
INDEX AREA
13 .00
BSC SQ
9
7
11
5
4
3
1
2
12
10
8
6
A
B
C
D
E
F
G
H
J
BALL A1
INDICATOR
11.00
BCS SQ
TOP VIEW
K
L
M
BOTTOM VIEW
DETAIL A
1.00 BSC
DETAIL A
*
1.85
MAX
*
1.32
1.21
1.11
0.53
0.43
COPLANARITY
0.20 MAX
0.70
0.60
0.50
SEATING
PLANE
BALL DIAMETER
*
COMPLIANT WITH JEDEC STANDARDS MO-192-AAD-1 WITH
EXCEPTION TO PACKAGE HEIGHT AND THICKNESS.
Figure 41. 144-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
(BC-144-3)
Dimensions shown in millimeters
Rev. B | Page 41 of 44
ADV212
ORDERING GUIDE
Temperature
Range
Speed
Grade
Package
Option
Model1
Operating Voltage Package Description
ADV212BBCZ-115
−40°C to +85°C 115 MHz 1.5 V Internal,
2.5 V or 3.3 V I/O
−40°C to +85°C 115 MHz 1.5 V Internal,
2.5 V or 3.3 V I/O
121-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
121-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
144-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
144-Ball Chip Scale Package Ball Grid Array [CSP_BGA]
BC-121-1
BC-121-1
BC-144-3
BC-144-3
ADV212BBCZRL-115
ADV212BBCZ-150
ADV212BBCZRL-150
−40°C to +85°C 150 MHz 1.5 V Internal,
2.5 V or 3.3 V I/O
−40°C to +85°C 150 MHz 1.5 V Internal,
2.5 V or 3.3 V I/O
1Z = RoHS Compliant Part.
Rev. B | Page 42 of 44
ADV212
NOTES
Rev. B | Page 43 of 44
ADV212
NOTES
©2006–2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D06389-0-4/10(B)
Rev. B | Page 44 of 44
相关型号:
©2020 ICPDF网 联系我们和版权申明