HMC426MS8TR [ADI]
SiGe Divide-by-4 SMT, DC - 4 GHz;型号: | HMC426MS8TR |
厂家: | ADI |
描述: | SiGe Divide-by-4 SMT, DC - 4 GHz 时钟 光电二极管 逻辑集成电路 |
文件: | 总6页 (文件大小:745K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC426MS8 / 426MS8E
v00.0903
SMT SiGe MMIC
DIVIDE-BY-4, DC - 4 GHz
6
Typical Applications
Features
Prescaler for DC to 4.0 GHz PLL Applications:
• DBS/CATV Tuners
Ultra Low SSB Phase Noise: -146 dBc/Hz
Wide Input Power Range: -15 to +10 dBm
Output Power: +3.5 dBm
• 802.11x & HiperLAN WLAN
• Fixed Wireless & WLL
Single DC Supply: +3V @ 13 m
MS8 SMT Package
• Microwave & VSAT Radios
• Cellular & 3G
Functional Diagram
Genal Dcription
The HM6MS8 HMC426MS8E are low noise
Divide-by-4 atDividers utilizing SiGe technology
in 8 lead surface mount plastic packages. This
evice opates from DC (with a square wave input)
to 0 Hz input frequency while operating from a
singl+3V supply at only 13 mA. The low additive
SSB phase noise of -146 dBc/Hz at 100 kHz offset
helps the user maintain excellent system noise
performance.
Electrical tion, TA = +25° C, 50 Ohm System, Vcc= 3V
Maximum Input F
Conditions
Min.
4.0
Typ.
4.5
0.2
-20
-20
+3.5
0
Max.
Units
GHz
GHz
dBm
dBm
dBm
dBm
dB
Minimum Input Frequency
Input Power Range
Sine Wave Input. [1]
Fin = 0.5 to 2 GHz
Fin = 2 to 4 GHz
Fin = 1 GHz
0.5
+5
-15
-15
+10
Output Power
+0.5
-3
Fin = 4 GHz
Reverse Leakage
25
SSB Phase Noise (100 kHz offset)
Output Transition Time
Supply Current (Icc)
Pin = 0 dBm, Fin = 3 GHz
-146
400
13
dBc/Hz
ps
Pin = 0 dBm, Fout = 500 MHz
mA
1. Divider will operate down to DC for square-wave input signal.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
6 - 60
HMC426MS8 / 426MS8E
v00.0903
SMT SiGe MMIC
DIVIDE-BY-4, DC - 4 GHz
6
Input Sensitivity Window, T= 25 °C
Input Sensitivity Window vs. Temperature
20
20
10
10
Min P25C
0
0
Max +25C
Min +85C
Pin +85C
Recommended
Operating Window
Min Pin -40
Max Pin -
-10
-20
-30
-10
-20
-30
0
1
2
3
4
0
1
2
3
4
INPUT FREQUENCY (GHz)
INPUT FRENCY (GHz)
SSB PNoise erformance @ Fin= 3 GHz
Pin= 0 dB, T= 5 °C
Output Power vs. Temperature
10
0
8
-20
6
4
-60
2
0
-80
-2
-100
-120
-140
-160
-4
+25C
+85C
-6
-8
-40C
-10
0
1
3
4
102
103
104
105
106
107
INPUT
OFFSET FREQUENCY (Hz)
Output Harmnten
Pin= 0 dB
Reverse Leakage, Pin= 0 dBm, T= 25 °C
0
-10
-20
-30
0
-10
-20
-30
-40
-50
-60
-70
-80
-40
-50
Pfeedthru
2nd Harmonic
3rd Harmonic
0
1
2
3
4
0
1
2
3
4
INPUT FREQUENCY (GHz)
INPUT FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
6 - 61
HMC426MS8 / 426MS8E
v00.0903
SMT SiGe MMIC
DIVIDE-BY-4, DC - 4 GHz
Output Voltage Waveform,
Pin= 0 dBm, Fout= 500 MHz, T= 25 °C
6
Input Return Loss
500
400
300
200
100
0
0
-5
-10
-15
-20
-25
-30
-35
-100
-200
-300
-400
-500
24.6
25.2
25.7
26.3
26.9
27.4
28
0
1
2
3
4
TIME (nS)
INPUT FRENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
6 - 62
HMC426MS8 / 426MS8E
v00.0903
SMT SiGe MMIC
DIVIDE-BY-4, DC - 4 GHz
6
Absolute Maximum Ratings
Typical Supply Current vs. Vcc
RF Input (Vcc = +3V)
+13 dBm
Vcc (V)
2.7
Icc (mA)
Vcc
+3.5V
10
13
16
Channel Temperature
150 °C
3.0
Continuous Pdiss (T = 85 °C)
(derate 7 mW/ °C above 85 °C)
3.3
460 mW
Note: Divider will operate over full volte range shown above
Thermal Resistance (RTH)(junction to lead) 142 °C/W
Storage Temperature
Operating Temperature
-65 to +150 °C
ELECTROSTASSITIVE DEVICE
OBSERVE HANDG PRAUTIONS
-40 to +85 °C
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H426
XXXX
HMC426MS8
Low Stress Injection Molded Plastic
Sn/Pb Solder
H426
XXXX
MSL1 [2]
HMC426MS8E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
6 - 63
HMC426MS8 / 426MS8E
v00.0903
SMT SiGe MMIC
DIVIDE-BY-4, DC - 4 GHz
6
Pin Description
Pin Number
Function
Description
Interface Schematic
1
VCC
Supply voltage 3V 0.3V.
2
IN
RF Input must be DC blocked.
RF Input 180° out of phase with pin 2 for differentoperation.
AC ground for single ended operat.
3
IN
4, 5
6, 8
GND
N/C
RF/DC round
nection
7
OUT
Divided output.
Applicati
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
6 - 64
HMC426MS8 / 426MS8E
v00.0903
SMT SiGe MMIC
DIVIDE-BY-4, DC - 4 GHz
6
Evaluation PCB
List of MEvaluation PCB 107622 [1]
The circuit board used in the final application should
useRFcircuitdesigntechniques. Signallinesshould
have 50 ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number of
via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request. This
evaluation board is designed for single ended input
and output testing.
Item
J1 - J2
J3 - J4
C1
SMA RF Connector
DC Pin
1000 pF Capacitor, 0603 Pkg.
4.7 uF Tantalum Capacitor
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0402 Pkg.
HMC426MS8 / HMC426MS8E Divide-by-4
107620 Eval Board
C2
C3 - C4
C5
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibility is assumed byAnalogDevices foritsuse, nor for anyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
6 - 65
相关型号:
©2020 ICPDF网 联系我们和版权申明