AMEL5-AZ [AIMTEC]
5 Watt | AC-DC Converter; 5瓦特| AC-DC转换器
| 型号： | AMEL5-AZ |
| 厂家： | 
AIMTEC |
| 描述： | 5 Watt | AC-DC Converter |
| 文件： | 总3页 (文件大小：320K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Preliminary
Series AMEL5-AZ
5 Watt | AC-DC Converter
FEATURES:
• I/O Isolation 3000VAC
• RoHS compliant
• Energy Star compliant
• Efficiency up to 74%
• Soft start
• Operating Temp: -40 oC to +80 oC
Models
Single output
• Input: 90-305VAC, 47-440Hz, or 120-430VDC
• Over load, Over Voltage, Short Circuit Protection
Maximum
capacitive Efficiency
Input
Voltage
(VDC)
Temperature
range
Output
Voltage
(V)
Output
Current max
(A)
Input Voltage
(VAC/Hz)
Model
Load
(µF)
2200
1100
680
(%)
(ºC)
AMEL5-3.3SAZ
AMEL5-5SAZ
AMEL5-12SAZ
AMEL5-15SAZ
AMEL5-24SAZ
90-305/47-440
90-305/47-440
90-305/47-440
90-305/47-440
90-305/47-440
120-430
120-430
120-430
120-430
120-430
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
3.3
5
12
15
24
1. 5
1
0.42
0.333
0.21
66
69
72
72
74
330
220
Input Specifications
Parameters
Conditions
Typical
Maximum
120
Units
mA
mA
A
115 VAC
230 VAC
115 VAC
230 VAC
Current (full load)
70
10
20
Inrush current <2ms (cold start)
A
Leakage current
External fuse
Input Dissipation
0.2
mA
A
W
slow blow type
No Load
1.5
<0.5
Output Specifications
Parameters
Voltage accuracy
Conditions
Typical
±2
Maximum
Units
%
Line regulation
Load regulation
Transient Recovery Time
Transient Response Deviation
Minimum load
±0.5
±0.5
200
±2
%
%
µs
0-100% load
25% load step
% of Vout
%
0
Ripple & Noise
20MHz bandwidth
100
mV p-p
*Ripple and Noise are measured at 20MHz bandwidth by using a 0.1µF (M/C) parallel capacitor.
Isolation Specifications
Parameters
Conditions
Typical
Rated
3000
Units
VAC
MΩ
Tested I/O voltage
Isolation Resistance
3sec
>1000
www.aimtec.com
F 052e R8
Tel: +1 514 620 2722
1 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Preliminary
Series AMEL5-AZ
5 Watt | AC-DC Converter
General Specifications
Parameters
Switching frequency
Over Load protection
Over voltage protection
Short circuit protection
Operating temperature
Storage temperature
Maximum Case temperature
Temperature coefficient
Humidity
Conditions
Typical
66
>116%
Maximum
Units
KHz
Auto recovery, Fold back
Zener diode clamp
Auto recovery
With derating above 50ºC
Refer to the models table above
-40 to +95
oC
oC
100
oC
0.02
20 ~ 95
% / oC
% RH
Non condensing
Case material
Weight
Plastic resin + Fiberglass (flammability to UL 94V-0)
30
g
Dimensions (L x W x H)
MTBF
2.03 x 1.10 x 0.70 inches 51.5 x 28 x 17.8mm
> 400 000 hrs (MIL-HDBK -217F, t=+25oC)
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Environment Approval
Parameters
Conditions
Wave form: Half sine wave
Acceleration amplitude: 5gn
Bump duration: 30 ms
Shock
Number of bumps: 18 (3 in each direction for every axis)
Converter operation before and after test, body mounted (on chassis)
Test mode: Sweep sine
10-100Hz, speed 0.05Hz/s
Displacement: 1mm
Vibrations
Acceleration: 3g
3 loops 30min one cycle, 3h total, every axis tested
Converter operation before and after test, body mounted (on chassis)
Safety Specifications
Parameters
Agency approvals
cULus, CE, CB pending
Medical Electrical Equipment
IEC\EN\UL 60950-1
EN 60950-1:2006+A11:2009
EN55022, class B
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
Information technology Equipment
EMI - Conducted and radiated emission
Electrostatic Discharge Immunity
RF, Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
Surge Immunity
Standards
IEC 61000-4-5
RF, Conducted Disturbance Immunity
Power frequency Magnetic Field Immunity
Voltage dips, Short Interruptions Immunity
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
Pin Out Specifications
www.aimtec.com
Tel: +1 514 620 2722
2 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
F 052e R8
North America only
Preliminary
Series AMEL5-AZ
5 Watt | AC-DC Converter
Pin
1
2
3
4
Single
AC Input (N)
AC Input (L)
+V Output
-V Output
No pin
5
Dimensions
2.03
(51.50)
1.80
(45.72)
1
2
3
1
2
3
0.40
(10.16)
1.10
(28.00)
0.80
(20.32)
TOP VIEW
4
5
TOP VIEW
4
0.40
(10.16)
5
0.11
(2.89)
17.80
(0.70)
5 Ø- 0.047 (Ø 1.2)
DIV: 0.2 (5.08)
Ø 0.04
(1.00)
Dimensions: inch (mm)
Case Tolerance:± 0.012 (0.30)
Pin Pitch Tolerance: ± 0.012 (0.30)
0.2
(5.08)
(Min)
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052e R8
Tel: +1 514 620 2722
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
相关型号：
©2020 ICPDF网 联系我们和版权申明