LPS100-3.3 [ASTRODYNE]

100W Single Output Switching Power Supply;
LPS100-3.3
型号: LPS100-3.3
厂家: ASTRODYNE CORPORATION    ASTRODYNE CORPORATION
描述:

100W Single Output Switching Power Supply

文件: 总4页 (文件大小:323K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
100W Single Output Switching Power Supply  
LPS100 series  
100% Full Load Burn-In Test  
Protections:Short circuit/Over load/Over voltage  
Cooling by free air convection  
Fix switching frequency at 134KHz  
Model Number Output Volts Output Amps  
SINGLE OUTPUT  
Ripple & Noise  
Min Load  
DC Volt Adjust  
Volt Tolerance  
LPS100-3.3  
LPS100-5  
3.3 Volts(DC)  
5 Volts(DC)  
20 Amps  
20 Amps  
13.3 Amps  
8.4 Amps  
7.5Amps  
6.7 Amps  
4.2 Amps  
3.8 Amps  
2.1 Amps  
150mV pk-pk  
100mV pk-pk  
100mV pk-pk  
100mV pk-pk  
100mV pk-pk  
100mV pk-pk  
150mV pk-pk  
150mV pk-pk  
200mV pk-pk  
0~20Amps  
0~20Amps  
3~3.6Volt(DC)  
4.5~5.7Volt(DC)  
6~9.0Volt(DC)  
10~13.2Volt(DC)  
12~15Volt(DC)  
13.5~18Volt(DC)  
20~26.4Volt(DC)  
26~32Volt(DC)  
41~56Volt(DC)  
±3.0%  
±3.0%  
±2.0%  
±2.0%  
±2.0%  
±2.0%  
±1.0%  
±1.0%  
±1.0%  
LPS100-7.5  
LPS100-12  
LPS100-13.5  
LPS100-15  
LPS100-24  
LPS100-27  
LPS100-48  
7.5 Volts(DC)  
12 Volts(DC)  
13.5 Volts(DC)  
15 Volts(DC)  
24 Volts(DC)  
27 Volts(DC)  
48 Volts(DC)  
0~13.3Amps  
0~8.4Amps  
0~7.5Amps  
0~6.7Amps  
0~4.2Amps(6A 10S)  
0~3.8Amps  
0~3.2Amps  
ASTRODYNE USA: 1-800-823-8082  
ASTRODYNE PACIFIC: 886-2-26983458  
WWW.ASTRODYNETDI.COM  
100W Single Output Switching Power Supply  
LPS100 series  
Insulation Resistance  
EMI  
Harmonic Current  
Efficiency, typ.  
≥ 100MΩ / 500Volts(DC)  
INPUT SPECIFICATIONS  
Compliance to EN55022B (CISPR22B)  
Compliance to EN61000-3-2,-3  
69% (LPS-100-3.3)  
77% (LPS-100-5/7.5)  
79% (LPS-100-12/13.5)  
80% (LPS-100-15/24)  
81% (LPS-100-27/48)  
3000VAC Input - Output  
1500VAC Input - Ground  
Input Voltage Range  
88 ~ 132 VAC / 176~264 VAC auto switch  
248~370 Volts(DC)  
Frequency Range  
47-63 Hz  
Inrush Current, typ: (cold start)30Amps@115VAC / 60Amps@230VAC  
Input Current, typ.  
2.3Amps@115VAC  
1.5Amps@230VAC  
< 1mAmps /240VAC  
See Selection Chart  
Isolation  
Leakage current  
Min Load  
500VAC Output - Ground  
Compliance to EN61000-4-2,3,4,5,6,8,11  
light Industry Level, Criteria A  
RC+/RC-: 0~0.8Volts(DC)= power On  
4~10Volts(DC)= power Off  
EMS  
OUTPUT SPECIFICATIONS  
Voltage and Current  
Line Regulation  
See Selection Chart  
±0.5%  
Remote ON/OFF  
Load Regulation  
±2.0%: 3.3~5Volts(DC)  
±1.5%: .5~15Volts(DC)  
±0.5%: 24~48Volts(DC)  
See Selection Chart  
See Selection Chart  
20mS/230VAC  
ENVIRONMENTAL SPECIFICATIONS  
Oper. Temperature  
Storage Temperature  
Relative Humidity  
Temperature Coefficient  
MTBF  
-10°C to +60°C (See Derate Curve)  
-20°C to +85°C, 10~95% RH  
20~90% RH non cond  
Voltage Tolerance (Note2)  
Ripple/Noise (Note 1)  
Hold Up Time,typ @ FL  
±0.05% / °C (0-50°C)  
20mS/115VAC  
203.6KHrs min,MIL-HDBK-217F(25°C)  
10~500Hz, 2G10min./1cycle, period for  
60min. each along X, Y, Z axes  
Setup, Rise Time @ FL  
Over Voltage Protection  
800ms, 50m/230VAC  
Vibration  
1200mS, 50mS/115VAC  
3.8 ~ 4.45Volt(DC): 3.3Volts(DC)  
5.75 ~ 6.75Volt(DC): 5Volts(DC)  
9.4 ~ 10.9Volt(DC): 7.5Volts(DC)  
13.8 ~ 16.2Volt(DC): 12Volts(DC)  
15.5 ~ 18.2Volt(DC): 13.5Volts(DC)  
18 ~ 21Volt(DC): 15Volts(DC)  
27.6~ 32.4Volt(DC): 24Volts(DC)  
33.7 ~ 39.2Volt(DC): 5Volts(DC)  
57.6~ 67.2Volt(DC): 48Volts(DC)  
Hiccup mode, auto recover  
105 ~ 140% (+24Volts: above 6.5Amps)  
rated output power  
PHYSICAL SPECIFICATIONS  
Size  
Millimeters  
Inches  
Weight  
222 x 62 x 32  
8.74” x 2.44 ” x 1.26 ”  
15.87 oz (450g)  
NOTE  
1. Ripple & noise are measured at 20MHz of bandwidth by using a 12”  
twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.  
2. Tolerance : includes set up tolerance, line regulation and load regula-  
tion.  
Over Current Protection  
DC Volt Adjust  
Hiccup mode, auto recover  
See Selection Chart  
3. If the input range 85V-89V, the output load is changed from 0A-rated  
load, There will be reduced 20V for 1second (LPS-100-24).  
4. Mounting holes M1 and M2 should be grounded for EMI purposes.  
GENERAL SPECIFICATIONS  
Safety  
UL60950-1,  
TUV EN60950-1 Approved  
All specifications are typical at nominal input, full load, and 25°C unless other-  
wise noted  
ASTRODYNE USA: 1-800-823-8082  
ASTRODYNE PACIFIC: 886-2-26983458  
WWW.ASTRODYNETDI.COM  
100W Single Output Switching Power Supply  
LPS100 series  
ASTRODYNE USA: 1-800-823-8082  
ASTRODYNE PACIFIC: 886-2-26983458  
WWW.ASTRODYNETDI.COM  
100W Single Output Switching Power Supply  
LPS100 series  
ASTRODYNE USA: 1-800-823-8082  
ASTRODYNE PACIFIC: 886-2-26983458  
WWW.ASTRODYNETDI.COM  

相关型号:

LPS100-48

100W Single Output Switching Power Supply
ASTRODYNE

LPS100-5

100W Single Output Switching Power Supply
ASTRODYNE

LPS100-7.5

100W Single Output Switching Power Supply
ASTRODYNE

LPS100-M

Medical and ITE safeties
EMERSON-NETWO

LPS100-M

EN61000-3-2 compliant
ARTESYN

LPS100-M_09

150 Watts Medical and ITE safeties
EMERSON-NETWO

LPS100-M_10

150 Watts
EMERSON-NETWO

LPS100CTP

Optical Pipe
VCC

LPS102-M

Medical and ITE safeties
EMERSON-NETWO

LPS102-M

EN61000-3-2 compliant
ARTESYN

LPS103-M

150 Watts Medical and ITE safeties
EMERSON-NETWO

LPS103-M

Total Power: 80 - 150 Watts
ARTESYN