LEDRA70XD5-PQ [BANNER]
High-Intensity Area Light;![LEDRA70XD5-PQ](http://pdffile.icpdf.com/pdf2/p00331/img/icpdf/LEDRA70XD5-P_2038626_icpdf.jpg)
型号: | LEDRA70XD5-PQ |
厂家: | ![]() |
描述: | High-Intensity Area Light |
文件: | 总4页 (文件大小:302K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LED..A70XD5-..High-Intensity Area Light
Datasheet
For use with Banner Vision Systems
To view or download the latest technical information about this product, including specifications, dimensions, accessories, and
wiring, see www.bannerengineering.com.
•
•
Compact area light for Banner Vision Systems
Five extremely bright LEDs for illumination of targets from 0.15
meters to beyond 2 meters
•
•
•
•
Continuous or strobed operation
Fixed or adjustable intensity, depending on model
Maintenance-free, rugged construction
Optically isolated strobe signal
Models
Model
LED Color
Cable
Fixed Intensity
Adjustable Intensity
LEDRA70XD5-PQ
LEDRA70XD5-XQ
LEDWA70XD5-XQ
LEDBA70XD5-XQ
LEDGA70XD5-XQ
LEDIA70XD5-XQ
Red, 620 nm to 630 nm
White, 5000 K to 8300 K
Blue, 465 nm to 485 nm
Green, 520 nm to 535 nm
Infrared, 850 nm
LEDWA70XD5-PQ
LEDBA70XD5-PQ
LEDGA70XD5-PQ
LEDIA70XD5-PQ
150 mm (6 in) pigtail with threaded 5-
pin Euro-style connector
Requires Euro-style mating cordset
LEDUV395A70XD5-XQ
LEDRA70XD5-XM
LEDWA70XD5-XM
LEDBA70XD5-XM
LEDGA70XD5-XM
LEDIA70XD5-XM
LEDUV395A70XD5-XM
LEDUV395A70XD5-PQ
LEDRA70XD5-PM
LEDWA70XD5-PM
LEDBA70XD5-PM
LEDGA70XD5-PM
LEDIA70XD5-PM
UV, 395 nm
Red, 620 nm to 630 nm
White, 5000 K to 8300 K
Blue, 465 nm to 485 nm
Green, 520 nm to 535 nm
Infrared, 850 nm
2 m (6.5 ft) pigtail with threaded 3-pin
Pico-style connector
Connects directly to the P4 or VE
sensor
LEDUV395A70XD5-PM
UV, 395 nm
The following caution applies to UV 395 nm models:
CAUTION:
Risk Group 2: UV Emitted from this product.
Eye or skin irritation may result from exposure. Use appropriate shielding and eye protection. Risk Group 2 (RG
2) products generally do not pose a realistic optical hazard if aversion responses limit the exposure duration or
where lengthy exposures are unrealistic.
- IEC 62471
Original Document
153956 Rev. F
13 March 2019
153956
LED..A70XD5-..High-Intensity Area Light
Wiring
Continuous On
Mode
PresencePlus Pro Controller
Terminal Block
1
Wire Purpose
Cable Wire Color
Strobed Mode
2
Power Wires
Brown (1)
Blue (3)
+24 V dc
common
+24 V dc
common
Pin 01
Pin 02
Open — Active Low
Pin 02 — Active High
Active Low: open
Active High: connect to common (Blue wire)
Strobe Polarity
Control
Gray (5)
open
0 V dc = ON (Active Low)
0 V dc = OFF (Active High)
Strobe common
+5 V dc to 24 V dc = OFF (Active Low)
+5 V dc to 24 V dc = ON (Active High)
White (2)
Black (4)
open
open
Pin 04
Strobe Voltage
Wires
Pin 02
(2) Strobe (+)
(1) +24V dc
(3) Common
(4) Strobe Common
(5)Active High/Active Low
Figure 1. Pinouts for Mating Cordsets
Light Intensity Adjustment
Adjust the light’s intensity by turning the 270° Intensity potentiometer with a small flat-blade screwdriver. Apply power to the light
and turn the potentiometer all the way clockwise for max. intensity. If the object to be sensed is too bright at max. intensity, turn
the potentiometer down a little at a time, testing with the object, until the correct brightness is achieved.
Specifications
Supply Voltage and Current
Construction
Operating Voltage: 24 V dc 10ꢀ
Strobe Voltage: 5 V dc to 24 V dc at 15 mA maximum
Current Draw at Full Intensity: 500 mA max
Built-in constant current regulator for LEDs
Adjustable intensity control varies intensity for "P" models
Use only with a suitable Class 2 power supply (UL) or SELV power supply (CE)
Enclosure rating: IP50 (when mounted using the two ¼ - 20 holes in back)
Housing: aluminum, black anodized
Window: acrylic, clear with frosted diffusing surface on inside
Useful Life
When operated within specifications, output will decrease less than 30ꢀ
after 50,000 hours for visible and IR Models; 20,000 hours for UV models
Light Source
Operating Conditions
Temperature: 0 °C to +50 °C (+32 °F to +122 °F)
Humidity: 90ꢀ maximum relative humidity (non-condensing)
Five high-intensity LEDs; see models table for wavelengths
Illumination
610 mm (24 in) diameter usable light pattern at 1 m (3.28 ft)
Certifications
Strobe
Optically isolated
Connections
Integral 5-pin M12/Euro-style quick disconnect, accessory cordset required
Light Characteristics
Values shown are typical at 25 °C.
Lumens
mWatts
Cool White
555
Green
435
Red
215
Blue
160
IR
UV395
610
LEDxA70
1130
1
2
For Banner-supplied wire.
When connecting the light to a PresencePLUS Pro controller terminal block, the controller supply must be 24 V dc 10ꢀ.
2
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 153956 Rev. F
LED..A70XD5-..High-Intensity Area Light
Optical Data
Area Light Diffuse Window
Isolux Pattern
mm
520
250
200
150
100
50
Percentage of Max
Light Intensity (Lux
or mW/m²)
80-100 %
60-80 %
40-60 %
20-40 %
0-20 %
0
50
100
150
200
250
(Mount height of 0.5 meters)
Values shown are typical at 25 °C.
Distance (m)
Max Center Beam Lux (lux)
Max Center Beam Irradiance (mW/m²)
Beam Width (m)
Cool White
Green
Red
Blue
IR
UV395
Vertical
Horizontal
(Spread 29.1°)
(Spread 30.7°)
0.25
0.50
1.00
22,990
18,019
5,510
1,450
8,906
2,723
717
6,628
2,027
533
46,808
14,313
3,767
25,268
7,727
2,033
0.13
0.26
0.52
0.14
0.27
0.55
7,030
1,850
Dimensions
Front View
Back View
All measurements are listed in millimeters [inches], unless noted otherwise.
Accessories
The following describes available cordset and bracket options for these lights.
P/N 153956 Rev. F
www.bannerengineering.com - Tel: + 1 888 373 6767
3
LED..A70XD5-..High-Intensity Area Light
Cordsets
Note: These 5-pin cordsets can also be used on 4-pin connector lights.
5-Pin Threaded M12/Euro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQDC20-506
MQDC20-515
1.83 m (6 ft)
2
1
4
4.57 m (15 ft)
42 Typ.
[1.65"]
3
5
Straight
1 = Brown
2 = White
3 = Blue
M12 x 1
ø 15 [0.59"]
MQDC20-530
9.14 m (30 ft)
4 = Black
5 = Gray
Bracket
SMBAMS70A
•
•
•
Zinc-plated cold rolled steel right-angle bracket
Articulated slots for 90+ degrees rotation
two 1/4-20 screws included
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not
cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO
BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES
RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,
STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the
product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will
void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at
any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:
www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.
©
Banner Engineering Corp. All rights reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明