AP2182A [DIODES]
1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE; 与输出放电1.5A双通道限流电源开关型号: | AP2182A |
厂家: | DIODES INCORPORATED |
描述: | 1.5A DUAL CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE |
文件: | 总17页 (文件大小:762K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Description
Pin Assignments
The AP2182A and AP2192A are dual channel current-limited
integrated high-side power switches optimized for Universal
Serial Bus (USB) and other hot-swap applications. The family
of devices complies with USB standards and available with
both polarities of Enable input.
( Top View )
1
2
3
4
8
7
6
5
GND
FLG1
OUT1
OUT2
FLG2
IN
The devices have fast short-circuit response time for
improved overall system robustness, and have integrated
output discharge function to ensure completely controlled
discharging of the output voltage capacitor. They provide a
complete protection solution for application subject to heavy
capacitive loads and the prospect of short circuit, and offer
reverse current blocking, over-current, over-temperature and
short-circuit protection, as well as controlled rise time and
under-voltage lockout functionality. A 7ms deglitch capability
on the open-drain Flag output prevents false over-current
reporting and does not require any external components.
EN1
EN2
SO-8
( Top View )
All devices are available in SO-8, MSOP-8-EP and
DFN3030E-8 packages.
1
2
8
FLG1
OUT1
OUT2
FLG2
GND
IN
7
6
Features
3
4
EN1
EN2
5
•
Dual channel current-limited power switch with output
discharge
MSOP-8-EP
•
•
•
•
•
•
•
•
•
•
•
•
Fast short-circuit response time: 2µs
2.0A accurate current limiting
Reverse Current Blocking
( Top View )
85mΩ on-resistance
Input voltage range: 2.7V – 5.5V
1
GND
8
7
6
5
FLG1
Built-in soft-start with 0.6ms typical rise time
Short circuit and thermal protection
Fault report (FLG) with blanking time (7ms typ)
ESD protection: 2KV HBM, 300V MM
Active high (AP2192A) or active low (AP2182A) enable
Ambient temperature range: -40ºC to 85°C
2
3
4
IN
OUT1
OUT2
FLG2
EN1
EN2
SO-8, MSOP-8-EP and DFN3030E-8 (Exposed Pad):
Available in “Green” Molding Compound (No Br, Sb)
DFN3030E-8
•
•
•
Lead Free Finish/ RoHS Compliant (Note 1)
UL Recognized, File Number E322375
IEC60950-1 CB Scheme Certified
Applications
•
•
•
•
LCD TVs & Monitors
Set-Top-Boxes, Residential Gateways
Laptops, Desktops, Servers,
Printers, Docking Stations, HUBs
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html.
1 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Typical Application Circuit
AP2192 A Enable Active High
Power Supply
2.7V to 5.5V
IN
OUT1
OUT2
Load
Load
1uF
1uF
10uF*
10uF*
1uF
10k
10k
FLG1
FLG2
ON
EN1
EN2
GND
OFF
Note: * USB 2.0 requires 120uF per hub
Available Options
Part Number
Recommended maximum
continuous load current
Current limit
Enable pin (EN)
Channel
(typical)
AP2182A
AP2192A
2
2
Active Low
Active High
2.0A
2.0A
1.5A
1.5A
Pin Descriptions
Pin Name
GND
IN
Pin Number
Descriptions
1
2
3
4
Ground
Voltage input pin
EN1
Switch 1 enable input, active low (AP2182A) or active high (AP2192A)
Switch 2 enable input, active low (AP2182A) or active high (AP2192A)
EN2
Switch 2 over-current and over-temperature fault report; open-drain flag is active
low when triggered
FLG2
5
OUT2
OUT1
6
7
Switch 2 voltage output pin
Switch 1 voltage output pin
Switch 1 over-current and over-temperature fault report; open-drain flag is active
low when triggered
FLG1
8
-
Internally connected to GND; recommend connecting to the GND externally for
improved power dissipation
Exposed Pad
2 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Functional Block Diagram
FLG 1
Therm al
Sense
AP2182A, AP2192A
D eglitch
C urrent
Lim it
EN 1
D river
G N D
U VLO
C urrent
Sense
O U T1
D ischarge
C ontrol
IN
C urrent
Sense
O U T2
D ischarge
C ontrol
U VLO
FLG 2
C urrent
Lim it
D river
EN 2
D eglitch
Therm al
Sense
G N D
Absolute Maximum Ratings
Symbol
Parameter
Ratings
Units
KV
V
ESD HBM
ESD MM
VIN
Human Body Model ESD Protection
Machine Model ESD Protection
Input Voltage
2
300
6.5
V
V
VOUT
Output Voltage
VIN + 0.3
6.5
VEN , VFLG
Iload
Enable Voltage
V
A
Maximum Continuous Load Current
Maximum Junction Temperature
Storage Temperature Range (Note 2)
Internal Limited
150
TJmax
°C
°C
TST
-65 to 150
Notes: 2. UL Recognized Rating from -30°C to 70°C (Diodes qualified TST from -65°C to 150°C)
Recommended Operating Conditions
Parameter
Min
Max
Units
Symbol
VIN
IOUT
Input voltage
Output Current
2.7
0
-40
5.5
1.5
85
V
A
°C
Operating Ambient Temperature
TA
3 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Electrical Characteristics (TA = 25oC, VIN = +5.0V, unless otherwise stated)
Symbol
Parameter
Input UVLO
Test Conditions (Note 3)
Disabled, IOUT= 0
Enabled, IOUT= 0
Disabled, OUT grounded
Disabled, VIN = 0V, VOUT = 5V, IREV at VIN
Min Typ. Max Unit
1.6
2.0
0.1
2.4
1
V
VUVLO
ISHDN
IQ
ILEAK
IREV
Input Shutdown Current
Input Quiescent Current, Dual
Input Leakage Current
μA
μA
μA
μA
115 180
1
Reverse Leakage Current
0.01 0.1
V
IN = 5V, IOUT = 1.5A,
SO-8
MSOP-8-EP,
DFN3030E-8
90
110
105
135
TA = 25oC
85
RDS(ON) Switch on-resistance
VIN = 5V, IOUT = 1.5A, -40oC≤ TA ≤ 85oC
mΩ
VIN = 3.3V, IOUT = 1.5A,
SO-8
MSOP-8-EP,
DFN3030E-8
110 130
105 125
170
TA = 25oC
VIN = 3.3V, IOUT = 1.5A, -40oC≤ TA ≤ 85oC
VIN = 5V, VOUT = 4.0V,
-40oC≤ TA ≤ 85oC
CL=10μF
ILIMIT
Over-Load Current Limit
1.6
3.2
2.0
2.4
A
A
V
IN = 5V, VOUT = 4.6V,
OUT1 & OUT2 tied
ILIMIT_G Ganged Over-Load Current Limit
-40oC≤ TA ≤ 85oC
4.0
4.8
together, CL=10μF
ITrig
Current limiting trigger threshold
Ganged current limiting trigger
threshold
2.5
5.0
A
A
Output Current Slew rate (<100A/s), CL=10μF
OUT1 & OUT2 tied together, Output Current Slew
rate (<100A/s) , CL=10μF
OUTx connected to ground, device enabled into
short circuit, CL=10μF
OUT1 & OUT2 connected to ground, device
enabled into short-circuit, CL=10μF
VOUT = 0V to IOUT = ILIMIT (output shorted to ground)
VIN = 2.7V to 5.5V
VIN = 2.7V to 5.5V
VEN = 0V to 5.5V
Disabled, VOUT = 0V
CL = 1μF, Rload = 5Ω
CL = 1μF, Rload = 5Ω
CL = 100μF, Rload = 5Ω
CL = 100μF, Rload = 5Ω
IFLG = 10mA
VFLG = 5V
CL=10μF
VIN = 5V, disabled, IOUT =1mA
Enabled, Rload=1kΩ
ITrig_G
IOS
Short-circuit current per channel
Ganged short-circuit current
2.0
A
A
IOS_G
3.2
2
4.0
2
4.8
0.8
TSHORT Short-circuit response time
VIL
VIH
μs
V
V
EN Input Logic Low Voltage
EN Input Logic High Voltage
EN Input leakage
ISINK
1
1
1.5
μA
μA
ms
ms
ms
ms
Ω
μA
ms
Ω
ILEAK-O Output leakage current
TR
TF
TD(ON) Output turn-on delay time
TD(OFF) Output turn-off delay time
RFLG
IFOH
TBlank FLG blanking time
RDIS
TSHDN Thermal shutdown threshold
THYS
0.5
0.6
0.05 0.3
0.2
0.1
20
0.01
7
Output turn-on rise time
Output turn-off fall time
0.5
0.3
40
1
FLG output FET on-resistance
FLG off current
4
15
Discharge resistance (Note 4)
100
140
25
°C
°C
Thermal shutdown hysteresis
SO-8 (Note 5)
MSOP-8-EP (Note 6)
DFN3030E-8 (Note 6)
115
75
60
Thermal Resistance Junction-to-
Ambient
oC/W
θJA
Notes: 3. Pulse-testing techniques maintain junction temperature close to ambient temperature; thermal effects must be taken into account
separately.
4. The discharge function is active when the device is disabled (when enable is de-asserted or during power-up power-down when
V
IN < V UVLO). The discharge function offers a resistive discharge path for the external storage capacitor for limited time.
5. Test condition for SO-8: Device mounted on FR-4 substrate PCB with minimum recommended pad layout.
6. Test condition for MSOP-8-EP and DFN3030E-8: Device mounted on 2” x 2” FR-4 substrate PCB, 2oz copper, with minimum
recommended pad on top layer and thermal vias to bottom layer ground plane.
4 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Typical Performance Characteristics
VEN
VEN
50%
50%
50%
50%
TD(OFF)
TD(OFF)
TR
TR
TF
TF
TD(ON)
TD(ON)
90%
90%
90%
90%
VOUT
VOUT
10%
10%
10%
10%
Figure 1. Voltage Waveforms: AP2182A (left), AP2192A (right)
Figure 2. Response Time to Short Circuit Waveform
All Enable Plots are for AP2182A Active Low
Turn-On Delay and Rise Time
Turn-Off Delay and Fall Time
EN
EN
5V/div
5V/div
C =1μF
L
T
=25°C
Iin
A
Iin
500mA/div
R =5ꢀ
L
500mA/div
C =1μF
L
Vout
2V/div
Vout
2V/div
T
=25°C
A
R =5ꢀ
L
500us/div
500us/div
5 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Typical Performance Characteristics (Continued)
Turn-On Delay and Rise Time
Turn-Off Delay and Fall Time
EN
5V/div
EN
5V/div
C =100μF
L
T
=25°C
A
Iin
Iin
R =5ꢀ
L
500mA/div
500mA/div
Vout
2V/div
Vout
C =100μF
L
2V/div
T
=25°C
A
R =5ꢀ
L
500us/div
500us/div
Short Circuit Current,
Inrush Current with
Device Enabled Into Short
Different Load Capacitance
EN
EN
5V/div
5V/div
CL=100μF
CL=220μF
CL=470μF
Iin
Iout
500mA/div
500mA/div
V
T
=5V
IN
V
T
=5V
IN
=25°C
=25°C
A
A
C =1μF
L
R =3ꢀ
500us/div
500us/div
1 Ω Load Connected to Enabled Device
0.6 Ω Load Connected to Enabled Device
V
=5V
IN
V
=5V
IN
T
=25°C
T =25°C
A
A
C =1μF
L
C =1μF
L
FLG
FLG
2V/div
2V/div
Iout
1A/div
Iout
1A/div
2ms/div
2ms/div
6 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Typical Performance Characteristics (Continued)
Short Circuit with Blanking Time and Recovery
Power On
FLG
5V/div
Vout
5V/div
T
=25°C
A
C =1μF
R =3ꢀ
L
L
Iout
500mA/div
FLG
5V/div
V
=5V
IN
T
=25°C
A
Vin
5V/div
C =1μF
L
Iout
Vout
1A/div
5V/div
20ms/div
1ms/div
Power Off
Device Enabled
FLG
5V/div
FLG
5V/div
T
=25°C
A
C =1μF
L
R =3ꢀ
L
Iout
Iout
500mA/div
500mA/div
Vin
EN
5V/div
5V/div
Vout
5V/div
Vout
5V/div
T
=25°C
A
C =1μF
L
R =3ꢀ
L
10ms/div
1ms/div
Device Disabled
UVLO Increasing
FLG
5V/div
Vin
2V/div
T
=25°C
A
Iout
C =1μF
L
500mA/div
R =3ꢀ
L
Vout
5V/div
EN
5V/div
Iout
1A/div
T
=25°C
A
Vout
5V/div
C =1μF
L
R =3ꢀ
L
1ms/div
1ms/div
7 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Typical Performance Characteristics (Continued)
UVLO Decreasing
UVLO Increasing (No Load)
T
=25°C
A
C =1μF
L
Vin
Vin
2V/div
2V/div
R =3ꢀ
L
Vout
5V/div
Vout
5V/div
Iout
1A/div
T
=25°C
A
C =1μF
L
R =0ꢀ
L
10ms/div
1ms/div
Channel 1 Enabled and Shorted
with Channel 2 Enabled
UVLO Decreasing (No Load)
V
=5V
IN
T
=25°C
A
T
=25°C
A
Vin
2V/div
C =1μF
R =0ꢀ
L
Vout1
5V/div
L
C =1μF
L
FLG1
5V/div
Vout2
5V/div
Vout
5V/div
FLG2
5V/div
20ms/div
5ms/div
Channel 2 Enabled and Shorted
with Channel 1 Enabled
Channels 1 and 2 Enabled and
Shorted
Vout1
5V/div
FLG1
5V/div
V
=5V
IN
T
=25°C
A
C =1μF
L
Vout2
5V/div
FLG2
5V/div
5ms/div
5ms/div
8 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Typical Performance Characteristics (Continued)
C =100uF
L
C =100uF
L
R =5ꢀ
L
R =5ꢀ
L
T
=25°C
T =25°C
A
A
C =1uF
L
R =5ꢀ
L
T
=25°C
A
C =1uF
L
R =5ꢀ
L
T
=25°C
A
Vin=5.0V
Vin=5.0V
Vin=5.5V
Vin=5.5V
Vin=2.7V
Vin=2.7V
9 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Typical Performance Characteristics (Continued)
Vin=3.3V
Vin=3.3V
Vin=5V
C =1uF
L
Vin=5V
UVLO Rising
UVLO Falling
V
V
=5V
IN
=4V
OUT
C =1uF
L
V
=5V
IN
T
=25°C
A
C =1uF
L
T
=25°C
A
C =1uF
L
10 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Application Note
Power Supply Considerations
A 0.1μF to 1μF X7R or X5R ceramic bypass capacitor between IN and GND, close to the device, is
recommended. Placing a high-value electrolytic capacitor on the input and output pin(s) is recommended when
the output load is heavy. This precaution reduces power-supply transients that may cause ringing on the input.
Additionally, bypassing the output with a 1μF ceramic capacitor improves the immunity of the device to short-
circuit transients.
Over-current and Short Circuit Protection
An internal sensing FET is employed to check for over-current conditions. Unlike current-sense resistors, sense
FETs do not increase the series resistance of the current path. When an overcurrent condition is detected, the
device maintains a constant output current and reduces the output voltage accordingly. Complete shutdown
occurs only if the fault stays long enough to activate thermal limiting.
Three possible overload conditions can occur. In the first condition, the output has been shorted to GND before
the device is enabled or before VIN has been applied. The AP2182A/AP2192A senses the short circuit and
immediately clamps output current to a certain safe level namely ILIMIT
.
In the second condition, an output short or an overload occurs while the device is enabled. At the instance the
overload occurs, higher inrush current may flow for a very short period of time before the current limit function can
react. The input capacitor(s) rapidly discharge through the device, activating current limit circuitry. Protection is
achieved by momentarily opening the P-MOS high-side power switch and then gradually turning it on. After the
current limit function has tripped (reached the over-current trip threshold), the device switches into current limiting
mode and the current is clamped at ILIMIT. The threshold for activating current limiting is 2A typical per channel.
In the third condition, the load has been gradually increased beyond the recommended operating current. The
current is permitted to rise until the current-limit threshold (ITRIG) is reached or until the thermal limit of the device is
exceeded. The AP2182A/AP2192A is capable of delivering current up to the current-limit threshold without
damaging the device. Once the threshold has been reached, the device switches into its current limiting mode and
is set at ILIMIT
.
FLG Response
When an over-current or over-temperature shutdown condition is encountered, the FLG open-drain output goes
active low after a nominal 7-ms deglitch timeout. The FLG output remains low until both over-current and over-
temperature conditions are removed. Connecting a heavy capacitive load to the output of the device can cause a
momentary over-current condition, which does not trigger the FLG due to the 7-ms deglitch timeout. The
AP2182A/AP2192A is designed to eliminate false over-current reporting without the need of external components
to remove unwanted pulses.
Power Dissipation and Junction Temperature
The low on-resistance of the internal MOSFET allows the small surface-mount packages to pass large current.
Using the maximum operating ambient temperature (TA) and RDS(ON), the power dissipation can be calculated by:
PD = RDS(ON)× I2
Finally, calculate the junction temperature:
TJ = PD x RθJA + TA
Where:
TA= Ambient temperature °C
RθJA = Thermal resistance
PD = Total power dissipation
11 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Application Note (Continued)
Thermal Protection
Thermal protection prevents the IC from damage when heavy-overload or short-circuit faults are present for
extended periods of time. The AP2182A/AP2192A implements a thermal sensing to monitor the operating junction
temperature of the power distribution switch. Once the die temperature rises to approximately 140°C due to
excessive power dissipation in an over-current or short-circuit condition the internal thermal sense circuitry turns
the power switch off, thus preventing the power switch from damage. Hysteresis is built into the thermal sense
circuit allowing the device to cool down approximately 25°C before the switch turns back on. The switch continues
to cycle in this manner until the load fault or input power is removed. The FLG open-drain output is asserted when
an over-temperature shutdown or over-current occurs with 7-ms deglitch.
Under-voltage Lockout (UVLO)
Under-voltage lockout function (UVLO) keeps the internal power switch from being turned on until the power
supply has reached at least 2V, even if the switch is enabled. Whenever the input voltage falls below
approximately 2V, the power switch is quickly turned off. This facilitates the design of hot-insertion systems where
it is not possible to turn off the power switch before input power is removed.
Discharge Function
The discharge function of the device is active when enable is disabled or de-asserted. The discharge function with
the N-MOS power switch implementation is activated and offers a resistive discharge path for the external storage
capacitor. This is designed for discharging any residue of the output voltage when either no external output
resistance or load resistance is present at the output.
Host/Self-Powered HUBs
Hosts and self-powered hubs (SPH) have a local power supply that powers the embedded functions and the
downstream ports. This power supply must provide from 5.25V to 4.75V to the board side of the downstream
connection under both full-load and no-load conditions. Hosts and SPHs are required to have current-limit
protection and must report over-current conditions to the USB controller. Typical SPHs are desktop PCs,
monitors, printers, and stand-alone hubs.
Generic Hot-Plug Applications
In many applications it may be necessary to remove modules or pc boards while the main unit is still operating.
These are considered hot-plug applications. Such implementations require the control of current surges seen by
the main power supply and the card being inserted. The most effective way to control these surges is to limit and
slowly ramp the current and voltage being applied to the card, similar to the way in which a power supply normally
turns on. Due to the controlled rise times and fall times of the AP2182A/AP2192A, these devices can be used to
provide a softer start-up to devices being hot-plugged into a powered system. The UVLO feature of the
AP2182A/AP2192A also ensures that the switch is off after the card has been removed, and that the switch is off
during the next insertion.
By placing the AP2182A/AP2192A between the VCC input and the rest of the circuitry, the input power reaches
these devices first after insertion. The typical rise time of the switch is approximately 1ms, providing a slow
voltage ramp at the output of the device. This implementation controls system surge current and provides a hot-
plugging mechanism for any device.
12 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Ordering Information
AP 21 X 2 A XX G - X
Packing
Green
Enable
Channel
Package
S : SO-8
MP : MSOP-8-EP
8 : Active Low
9 : Active High
2 : 2 Channel
7/13 : Tape & Reel
G : Green
FGE : DFN3030E-8
7”/13” Tape and Reel
Package
Code
Packaging
(Note 7)
Device
Quantity
Part Number Suffix
AP21X2ASG-13
AP21X2AMPG-13
AP21X2AFGEG-7
S
MP
FGE
SO-8
MSOP-8-EP
DFN3030E-8
2500/Tape & Reel
2500/Tape & Reel
3000/Tape & Reel
-13
-13
-7
Notes: 7. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
Marking Information
(1) SO-8
( Top view )
8
7
6
5
4
2 : 2 Channel
Logo
YY : Year : 08, 09,10~
Part Number
8 : Active Low
9 : Active High
AP21X XA
YY WW X X
WW : Week : 01~52; 52
represents 52 and 53 week
X : Internal Code
G : Green
2
3
1
(2) MSOP-8-EP
( Top view )
8
1
7
6
5
A~Z : Green
MSOP-8-EP
Y : Year : 0~9
Logo
Y W X E
W : Week : a~z : 1~26 week;
A~Z : 27~52 week; Z represents
52 and 53 week
Part Number
AP21X XA
8 : Active Low
9 : Active High
2 : 2 Channel
2
3
4
13 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Marking Information (Continued)
(3) DFN3030E-8
( Top View )
XX : Identification Code
Y : Year : 0~9
X X
Y X
W : Week : A~Z : 1~26 week;
W
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Green
Part Number
Package
Identification Code
AP2182AFGEG-7
AP2192AFGEG-7
DFN3030E-8
DFN3030E-8
AE
AF
Package Outline Dimensions (All Dimensions in mm)
(1) Package type: SO-8
Gauge Plane
Seating Plane
0.62/0.82
Detail "A"
7°~9°
7°~9°
0.35max.
45°
Detail "A"
0°/8°
0.3/0.5
1.27typ
4.85/4.95
8x-0.60
6x-1.27
Land Pattern Recommendation
(Unit: mm)
14 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Package Outline Dimensions (Continued)
(2) Package type: MSOP-8-EP
EXPOSED PAD
(BOTTOM)
8x-0.45
6x-0.65
1
0.22/0.38
0.65Bsc.
1
Land Pattern Recommendation
(Unit:mm)
"A"
0.05
2.9/3.1
1
EXPOSED PAD
(BOTTOM)
Gauge plane
0.4/0.8
0.95Ref.
DETAIL "A"
1.65/1.95
(3) Package type: DFN3030E-8
TOP MARK
0.10 C
8X-
Seating Plane
0.08 C
Side View
C
2.95/3.05
A
B
(Pin #1 ID)
2.15/2.35
2X-
0.25 B
0.65Typ.
0.20/0.30
8X-
0.10
C A B
Bottom View
15 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Taping Orientation (Note 8)
For DFN3030E-8
Notes: 8. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf
16 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
AP2182A/AP2192A
1.5A DUAL CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other
changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability
arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any
license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described
herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies
whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized
sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall
indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names
and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without
the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided
in the labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or
systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements
concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,
notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,
Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes
Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2010, Diodes Incorporated
www.diodes.com
17 of 17
www.diodes.com
October 2010
© Diodes Incorporated
AP2182A/2192A
Document number: DS32193 Rev. 2 - 2
相关型号:
©2020 ICPDF网 联系我们和版权申明