DF38-40P-03SD [ETC]
0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors;型号: | DF38-40P-03SD |
厂家: | ETC |
描述: | 0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors |
文件: | 总10页 (文件大小:419K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors
DF38 Series
High contact reliability –
Effective mating length of 0.4 mm
3.7 0.15
ꢀ0.4ꢁ Effective mating length
■Features
Enhanced shielding
1. Small mated height and board occupied space
Small pitch (0.3mm) and mated height (1.5mm) allows use
in space-restricted areas.
Plug’s height of 1.3mm and width of 2.38mm allow its
passage through narrow openings in small-diameter hinge
applications.
2. Enhanced shielding and ground connections
Metal shells on the plug and receptacle connect to each
other with a reliable multi-point ground contacts, assuring
reliable ground connection and EMC protection.
3. Reliable lock
Fully mated condition is assured with reliable locks at 4
locations, confirming it with a distinct tactile click.
Multi-point ground contacts
4. Reliable electrical and mechanical connection
Despite its small mated height, unique contact configuration
assures highly reliable connection, with effective mating
length of 0.4mm.
4-point lock:
2 points at each end
5. Solder wicking prevention
Nickel barriers prevent solder wicking in the critical contact
areas.
6. Durable plug construction
Formed metal shells on the top and side surfaces form a strong
and rigid assembly.
■Connector for conductivity tests
We have a line-up of connectors for inspection, usable for
electrical testing of both plug and receptacle connectors.
Distinct tactile click
2010.9
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors
■Specifications
Operating temperature range
Operating humidity range
Storage temperature range
Storage humidity range
AWG #42: 0.15 A
Wire size AWG #44: 0.1 A (Note.3)
AWG #46: 0.1 A
-35 to +85°C ꢀNote 1ꢁ
RH 20% to 80%
-10 to +60°C ꢀNote 2ꢁ
RH 40% to 70% ꢀNote 2ꢁ
Current rating
Voltage rating
Ratings
30 V AC
Item
Specification
Conditions
50Mø min
No flashover or insulation breakdown
Signal: 80mø max., Ground: 80mø max.
1.Insulation resistance
2.Withstanding voltage
3.Contact resistance
100V DC
100 V AC / 1 minute
100mA ꢀDC or 1,000Hzꢁ
Frequency: 10 to 55 Hz, single amplitude of
0.75 mm, 3 directions, 2 hours
4.Vibration
No electrical discontinuity of 1 µs or longer
Contact resistance ꢀchange from initial valueꢁ
50 mø max.
5.Humidity
96 hours at of 40 2°C, and humidity of 90 to 95%
Insulation resistance: 25 Mø min.
Contact resistance ꢀchange from initial valueꢁ
50 mø max.
Insulation resistance: 50 Mø min.
-55°C ■ 5 to 35°C ■ 85°C ■ 5 to 35°C
Time: 30 min. ■ 2 to 3 min. ■ 30 min. ■ 2 to 3 min.
5 cycles
6.Temperature cycle
7.Durability
Contact resistance ꢀchange from initial valueꢁ
50 mø max.
30 cycles
Reflow: At the recommended temperature profile
Manual soldering: 350°C for 3 seconds
8.Resistance to
soldering heat
No deformation of affecting performance
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of connectors after board mounting and the
temporary storage conditions of transportation, etc.
Note 3: With only the connector portion at an elevated temperature level, the rated current value is set.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications
for a specific part number shown.
■Material
Product
Part
Insulator
Contacts
Material
LCP
Finish
Color: Black
Gold plated
Tin plated
Color: Black
Remarks
UL94-V0
---------------
---------------
UL94-HB
UL94-V0
---------------
---------------
Receptacle
Phosphor bronze
Metal cover
Pick-and-place platform
Insulator
Polyamide
LCP
Color: Natural ꢀBeigeꢁ, Black
Gold plated
Plug
Contacts
Metal cover
Phosphor bronze
Tin plated
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors
■Ordering information
■Connector
( )
DF 38 A J – ■ S – 0.3 V ■■
1
2
3
4
5
6
7
8
9
DF 38 J – ■ P – SHL
1
2
4
5
6
10
Series name : DF
Connector type
1
2
3
6
Series No.
: 38
S : Receptacle
Insulator typestyle
P : Plug
Receptacle A : Standard
Plug Blank : Standard
Connector style
Contact pitch : 0.3mm
Termination type
7
8
V : Straight SMT
4
5
Receptacle/Shell
SD : Fine coaxial cable plug
Packaging
J : Receptacle for conductivity tests
Blank : Standard
9
ꢀ51ꢁ : Embossed tape packaging
Installation item ꢀseparateꢁ
SHL : Metal cover
Number of positions : 30, 32, 40
10
■Combinations
■Standard use
DF38A-*S-0.3Vꢀ**ꢁ
+ DF38-*P-ASSY
DF38-*P-0.3SDꢀ**ꢁ
ꢀ DF38-*P-SHL
ꢁ
Note: The product specification of the above combination is shown on page 2.
■Receptacle conductivity test
DF38A-*S-0.3Vꢀ**ꢁ
+ DF38J-*P-ASSY ··· ꢀNoteꢁ
DF38-*P-0.3SDꢀ**ꢁ
ꢀ DF38J-*P-SHL
ꢁ
Note: This harness item is only usable for the receptacle test.
For the product specification of the above combination, please contact our sales department.
■Plug conductivity test
DF38AJ-*S-0.3Vꢀ**ꢁ ··· ꢀNoteꢁ
+ DF38-*P-ASSY
DF38-*P-0.3SDꢀ**ꢁ
ꢀ DF38-*P-SHL
ꢁ
This harness item is only usable for the plug test.
Note:
For the product specification of the above combination, please contact our sales department.
* : ASSY means a harness item.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors
■Receptacles
B
0.2
A
0.15
P=0.3 0.1
0.1 0.05
Contact No.2
Contact No.1
■Recommended PCB mounting pattern
D
C
A
0.05
0.05
0.02
P=0.3 0.02
Contact No.2
J
0.05
0.05
H
0.05
G
F
0.05
1
Contact No.1
F
0.05
G
0.05
H
0.05
J
0.05
0.3 0.02
Ground areas
C
E
0.05
0.05
Refer to User Recommendation page
ꢀPara. 3ꢁ for the recommended metal
mask dimensions and open area ratios.
1
Note
:
Area indicated must be free of conductive
traces or the conductive traces must be covered by resist film.
[Specifications number] - * *, ꢀ* *ꢁ
ꢀ51ꢁ : Gold plated, Embossed tape packaging
ꢀ5,000 pieces per reelꢁ
All dimensions: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
F
G
H
J
DF38A-30S-0.3Vꢀ**ꢁ
DF38A-32S-0.3Vꢀ**ꢁ
DF38A-40S-0.3Vꢀ**ꢁ
662-4505-4-**
662-4028-7-**
662-4501-3-**
30
32
40
8.7
9.3
11.7
13.1
13.7
16.1
9.6
12.8
13.4
15.8
13.7
14.3
16.7
0.95
1.25
1.25
1.25
0.95
0.95
2.95
3.25
3.85
3.25
2.95
3.55
10.2
12.6
Note 1: Tape and reel packaging ꢀ5,000 pieces/reelꢁ.
Order by number of reels.
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors
■Plug - separate metal cover required
A
B
0.15
0.15
P=0.3 0.1
Contact No.1
All dimensions: mm
Part Number
CL No.
Number of Contacts
A
B
C
DF38B-30P-0.3SDꢀ**ꢁ
DF38-32P-0.3SDꢀ**ꢁ
DF38-40P-0.3SDꢀ**ꢁ
662-4515-8-**
662-4027-4-**
662-4502-6-**
30
32
40
14.0
14.6
17.0
8.7
9.3
11.7
9.55
10.15
12.55
Note 1: Tray packaging ꢀ100 pieces/trayꢁ.
Order by quantity of trays.
Note 2: The metal cover is required for fine coaxial cable termination.
■Recommended Fine Coaxial Cable Preparation
C
0.1
B
0.15
Inner conductor
ꢀPre-soldering
requiredꢁ ꢀNote 1ꢁ
P=0.3 0.07
0.2 MAX ꢀInsulatorꢁ
Outer shield
ꢀNO protrusionꢁ
Ø0.3 MAX ꢀJacketꢁ
0.46 MAX
ꢀGround barꢁ
Laminated tape
Note 1: Contact Hirose for Termination Procedures.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors
■Metal cover - Required for assembly of the Plug
1.22 0.15
A
0.15
All dimensions: mm
Part Number
DF38-30P-SHL
DF38-32P-SHL
DF38-40P-SHL
CL No.
Number of Contacts
A
662-4507-0
662-4029-0
662-4503-9
30
32
40
12.15
12.75
15.15
Note 1: Tape and reel packaging ꢀ10,000 pieces/reelꢁ.
Order by number of reels.
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors
■Embossed Carrier Tape Dimensions (JIS C 0806)
■Receptacle
8
4
0.1
0.1
ꢀ1.7ꢁ
ꢀVacuum pick-up area centerꢁ
2
0.1
F - F
ꢀ2.1ꢁ
ꢀ1.8ꢁ
F
G
ꢀ1ꢁ
F
G
Unreeling direction
G - G
ꢀ4ꢁ
■Reel Dimensions
Part Number Label
Unreeling direction
Ø21 0.8
D+2
0
E MAX
All dimensions: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
DF38A-30S-0.3Vꢀ51ꢁ
DF38A-32S-0.3Vꢀ51ꢁ
DF38A-40S-0.3Vꢀ51ꢁ
662-4505-4-51
662-4028-7-51
662-4501-3-51
30
32
40
32
32
32
28.4
28.4
28.4
14.2
14.2
14.2
32.4
32.4
32.4
38.4
38.4
38.4
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors
■Embossed Carrier Tape Dimensions (JIS C 0806)
■Plug
ꢀ1.7ꢁ
8
4
0.1
0.1
ꢀVacuum pick-up area centerꢁ
2
0.1
F
F - F
ꢀ1.5ꢁ
ꢀ1.8ꢁ
G
G
F
Unreeling direction
G - G
ꢀ2.7ꢁ
■Reel Dimensions
Part Number Label
Ø21 0.8
D+2
0
E MAX
All dimensions: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
DF38-30P-0.3SDꢀ51ꢁ
DF38-32P-0.3SDꢀ51ꢁ
DF38-40P-0.3SDꢀ51ꢁ
662-4506-7-51
662-4027-4-51
662-4502-6-51
30
32
40
32
32
32
28.4
28.4
28.4
14.2
14.2
14.2
32.4
32.4
32.4
38.4
38.4
38.4
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors
■Extraction tool
For details about the extraction tool, please contact your Hirose sales representative.
■Usage Recommendations
1. Recommended temperature profile
Temperature ꢀçꢁ
250
200
150
100
50
250ç
220ç
60sec.
180ç
max.
150ç
90 to 120sec.
Room
temperature
50
100
150
200
250
300
Time ꢀsec.ꢁ
Solder composition: Paste, 96.5%Sn/3.0%Ag/0.5%Cu
Note 1: Up to 2 cycles of Reflow soldering are possible under the
same conditions, provided that there is a return
to normal temperature between the first and second cycle.
Note 2: The temperature profile indicates the board surface temperature
at the point of contacts with the connector terminals.
2.Recommended manual soldering
Manual soldering: 350ç for 3 seconds
Do NOT use flux compound when manual soldering.
Thickness: 0.1 mm
Open area ratio: Lead terminal: 80%
Ground terminal: 100%
3.Recommended screen thickness and open
area ratio ꢀPattern area ratioꢁ
4.Board warpage
Maximum of 0.02mm at the connector center, with both ends of the
connector as reference points.
Refer to “Nylon Connector Use Handbook”.
5.Cleaning conditions
6.Precautions
* Mating and un-mating of the connectors when not soldered on the
boards is not recommended as this may cause deformation of the
terminals, damage to the contacts or insulators.
* When mating/un-mating do not twist or lift by the corners. Apply the
forces evenly across the entire length and width of the connectors
taking care NOT to damage or deform soldered terminations.
* Slight discoloration on the insulating materials will not affect form,
fit or function of the connectors.
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF38 Series■0.3 mm Pitch, 1.5 mm Mated Height, Board- to-Fine Coaxial Cable Connectors
■Precautions
Precautions
■Mating
Mate the plug with the receptacle by pressing straight against the entire plug surface.
Do NOT un-mate the plug while holding by the terminated cable.
Plug
Lock areas
Lock areas
Receptacle
■Un-mating
Use a dedicated extraction tool to un-mate the plug. Insert the tool under either end of the plug ꢀclearanceꢁ and pull straight up as illustrated.
Do NOT un-mate the plug while holding by the terminated cable.
Extraction tool
End side ꢀclearanceꢁ
■Routing of the fine coaxial cable after termination
Allow sufficient clearance between the plug and the fine coaxial cable to avoid sharp bend, excessive twist or pull forces applied to the connector.
No pulling
■Other
· Do NOT mate / un-mate the connectors when receptacle is not mounted on the board.
· Different production lots may exhibit different shades of the insulator materials. No affect on form, fit or function of the connectors.
· Rework of the soldered terminations on the board-mounted receptacles is not possible.
· Sides of the metal cover protrude over the termination areas.
· Do not mate / un-mate the connectors when receptacle is not mounted on the board.
10
相关型号:
DF38A-30S-0.3V(51)
Board Connector, 30 Contact(s), 1 Row(s), Female, Straight, 0.012 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle, ROHS COMPLIANT
HRS
DF38A-32S-0.3V(51)
Board Connector, 32 Contact(s), 2 Row(s), Straight, 0.012 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle
HRS
DF38A-40S-0.3V(51)
Board Connector, 40 Contact(s), 1 Row(s), Female, Straight, 0.012 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle, ROHS COMPLIANT
HRS
DF3A-10EP-2A
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
HRS
DF3A-10EP-2C
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
HRS
DF3A-10EP-2DS
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
HRS
DF3A-10EP-2DSA
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
HRS
©2020 ICPDF网 联系我们和版权申明