DPA01DM48 [ETC]
;型号: | DPA01DM48 |
厂家: | ETC |
描述: |
|
文件: | 总3页 (文件大小:155K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Monitoring Relays
3-Phase Sequence and Phase Loss
Types DPA01, PPA01
• 3-phase monitoring relays for phase
sequence and phase loss
• Detect when all 3 phases are present and have the
correct sequence
• Measure on own power supply
• Power supply range: 208 to 480 VAC (±15%)
• Output: 8 A SPDT relay or 8 A DPDT normally energized
• For mounting on DIN-rail in accordance with DIN/EN
50 022 (DPA01) or plug-in module (PPA01)
• 22.5 mm Euronorm housing (DPA01) or 36 mm plug-in
module (PPA01)
• LED indication for relay and power supply ON
DPA01D
PPA01
Product Description
Ordering Key
DPA 01 C M44
Housing
3-phase relay for detection of models). For mounting on
incorrect phase sequence, DIN-rail or plug-in module.
total and partial phase loss. The device detects regener-
Supply range from 208 to 480 ated voltages up to 70% of
VAC covered by one multi- the mains nominal voltage
voltage relay (or by two multi- (phase-neutral).
Function
Type
Item number
Output
Power supply
voltage relays for DPA01D
Type Selection
Mounting
Output
Supply: 208-480 VAC
DPA 01 C M44
Supply: 208-240 VAC
DPA 01 D M23
Supply: 380-480 VAC
DPA 01 D M48
DIN-rail
DIN-rail
Plug-in
SPDT
DPDT
SPDT
PPA 01 C M44
Input Specifications
Output Specifications
Input
Output
Rated insulation voltage
Contact ratings (AgSnO2)
DPA01C, PPA01 (SPDT):
SPDT or DPDT relay, N.E.
L1, L2, L3
DPA01: Terminals L1, L2, L3
PPA01: Terminals 5, 6, 7
Measures on own supply
250 VAC
µ
Measuring ranges
Resistive loads
AC 1
DC 12
8 A @ 250 VAC
5 A @ 24 VDC
2.5 A @ 250 VAC
2.5 A @ 24 VDC
208 to 480 VAC (DPA01C) 177 to 550 VAC
208 to 415 VAC (PPA01C) 177 to 475 VAC
208 to 240 VAC (DPA01D) 177 to 275 VAC
380 to 480 VAC (DPA01D) 323 to 550 VAC
Small inductive loads AC 15
DC 13
DPA01D (DPDT):
Resistive loads
Small inductive loads AC 15
DC 13
ON-level
> 70% of the mains phase-
neutral voltage
AC 1
8 A @ 250 VAC
3 A @ 250 VAC
2 A @ 24 VDC
Mechanical life
Electrical life
≥ 30 x 106 operations
≥ 105 operations
(at 8 A, 250 V, cos ϕ = 1)
Operating frequency
≤ 7200 operations/h
Dielectric strength
Dielectric voltage
≥ 2 kVAC (rms)
Rated impulse withstand volt. 4 kV (1.2/50 µs)
Specifications are subject to change without notice (21.10.00)
1
DPA01, PPA01
Supply Specifications
General Specifications
Reaction time
Alarm ON delay
Alarm OFF delay
Power supply
Rated operational voltage
through terminals:
Overvoltage cat. III
(IEC 60664, IEC 60038)
< 100 ms
< 300 ms
L1, L2, L3
5, 6, 7
DPA01CM44
(DPA01)
(PPA01)
Accuracy
Temperature drift
Repeatability
(15 min warm-up time)
± 1000 ppm/°C
± 0.5% on full scale
208 to 480 VAC ± 15%,
45 to 65 Hz
208 to 415 VAC ± 15%,
45 to 65 Hz
208 to 240 VAC ± 15%,
45 to 65 Hz
380 to 480 VAC ± 15%,
45 to 65 Hz
Indication for
Power supply ON
Relay ON
PPA01CM44
DPA01DM23
DPA01DM48
LED, green
LED, yellow
Environment
Degree of protection
Pollution degree
(EN 60529)
IP 20
3 (DPA01), 2 (PPA01)
-20 to 60°C, R.H. < 95%
@ 475 VAC, 65 Hz
-20 to 50°C, R.H. < 95%
@ 550 VAC, 65 Hz
-30 to 80°C, R.H. < 95%
Operating temperature
Rated operational power
13 VA @ 400 VAC, 50 Hz
13 VA @ 230 VAC, 50 Hz
(DPA01DM23 only)
Supplied by L2 and L3
Storage temperature
Housing dimensions
DIN-rail version
Plug-in version
22.5 x 80 x 99.5 mm
36 x 80 x 87 mm
Weight
Approx. 100 g
Screw terminals
Tightening torque
Max. 0.5 Nm
acc. to IEC 60947
CE-Marking
Yes
Mode of Operation
DPA01 and PPA01 monitor phase-neutral voltage drops Example 1
Example 2
their own 3-phase power below 70% of the other The relay monitors that the The relay releases in case of
supply. The relay operates phase-neutral voltages.
when all the phases are pre-
power supply has the correct interruption of one or more
phase sequence and that all phases, provided that the
sent
and
the
phase
phase voltages are present.
regenerated voltage does
not exceed 70% of the
mains phase-neutral voltage.
sequence is correct. The
relay releases when one
Operation Diagram
L1
L2
L1
L3
L3
L2
L1
L1
L2
L3
L1
L2
L3
Relay ON
2
Specifications are subject to change without notice (21.10.00)
DPA01, PPA01
Wiring Diagrams
Example 1
Example 1
L3
L2
L1
L3
L2
L1
µ
µ
µ
L1 L2 L3 12
14 22
24
5
6
7
4
3
m<3
m<3
L2
L3
L2
L3
11
21
1
DPA01C... DPA01D
DPA01D...
Example 2
Example 2
L3
L2
L1
L3
L2
L1
µ
µ
µ
L1 L2 L3 12
14 22
24
5
6
7
4
3
m<3
m<3
L2
L2
L3
L3
11
21
1
DPA01C... DPA01D
DPA01D...
DPA01
PPA01
Specifications are subject to change without notice (21.10.00)
3
相关型号:
©2020 ICPDF网 联系我们和版权申明