FSGL130D1 [ETC]

TRANSISTOR | MOSFET | N-CHANNEL | 100V V(BR)DSS | 12A I(D) | TO-205AF ; 晶体管| MOSFET | N沟道| 100V V( BR ) DSS | 12A I( D) | TO- 205AF\n
FSGL130D1
型号: FSGL130D1
厂家: ETC    ETC
描述:

TRANSISTOR | MOSFET | N-CHANNEL | 100V V(BR)DSS | 12A I(D) | TO-205AF
晶体管| MOSFET | N沟道| 100V V( BR ) DSS | 12A I( D) | TO- 205AF\n

晶体 晶体管 开关 脉冲
文件: 总7页 (文件大小:90K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
FSGL130R  
Data Sheet  
December 2001  
Radiation Hardened, SEGR Resistant  
N-Channel Power MOSFET  
Features  
• 12A (Current Limited by Package), 100V, r  
• UIS Rated  
= 0.080  
DS(ON)  
Fairchild Star*Power Rad Hard  
MOSFETs have been specifically  
TM  
Total Dose  
developed for high performance  
applications in a commercial or  
- Meets Pre-rad Specifications to 100 krad (Si)  
military space environment.  
Star*Power MOSFETs offer the system designer both  
• Single Event  
- Safe Operating Area Curve for Single Event Effects  
extremely low r  
and Gate Charge allowing the  
DS(ON)  
2
- SEE Immunity for LET of 82MeV/mg/cm with  
development of low loss Power Subsystems. Star*Power  
Gold FETs combine this electrical capability with total dose  
radiation hardness up to 100 krads while maintaining the  
guaranteed performance for Single Event Effects (SEE)  
which the Fairchild FS families have always featured.  
V
up to 80% of Rated Breakdown  
DS  
• Dose Rate  
- Typically Survives 3E9 rad (Si)/s at 80% BV  
DSS  
- Typically Survives 2E12 if Current Limited to I  
AS  
• Photo Current  
The Fairchild family of Star*Power FETs includes a series of  
devices in various voltage, current and package styles. The  
portfolio consists of Star*Power and Star*Power Gold  
products. Star*Power FETs are optimized for total dose and  
- 1.5nA Per-rad (Si)/s Typically  
• Neutron  
2
- Maintain Pre-rad Specifications for 3E13 Neutrons/cm  
r
while exhibiting SEE capability at full rated voltage  
DS(ON)  
2
- Usable to 3E14 Neutrons/cm  
up to an LET of 37. Star*Power Gold FETs have been  
optimized for SEE and Gate Charge combining SEE  
performance to 80% of the rated voltage for an LET of 82  
with extremely low gate charge characteristics.  
Symbol  
D
This MOSFET is an enhancement-mode silicon-gate power  
field effect transistor of the vertical DMOS (VDMOS)  
structure. It is specifically designed and processed to be  
radiation tolerant. The MOSFET is well suited for  
applications exposed to radiation environments such as  
switching regulation, switching converters, power  
distribution, motor drives and relay drivers as well as other  
power control and conditioning applications. As with  
conventional MOSFETs these Radiation Hardened  
MOSFETs offer ease of voltage control, fast switching  
speeds and ability to parallel switching devices.  
G
S
Packaging  
TO-205AF  
Reliability screening is available as either TXV or Space  
equivalent of MIL-PRF-19500.  
Formerly available as type TA45226W.  
Ordering Information  
RAD LEVEL SCREENING LEVEL PART NUMBER/BRAND  
G
D
S
10K  
Engineering Samples FSGL130D1  
100K  
100K  
TXV  
FSGL130R3  
FSGL130R4  
Space  
©2001 Fairchild Semiconductor Corporation  
FSGL130R Rev. B  
FSGL130R  
o
Absolute Maximum Ratings T = 25 C, Unless Otherwise Specified  
C
FSGL130R  
100  
UNITS  
Drain to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V  
V
V
DS  
Drain to Gate Voltage (R  
= 20k) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V  
100  
GS  
DGR  
Continuous Drain Current  
o
T
T
= 25 C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I  
12 (Note)  
A
A
A
V
C
D
D
o
= 100 C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I  
8
C
Pulsed Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I  
48  
DM  
Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V  
±30  
GS  
Maximum Power Dissipation  
o
T
T
= 25 C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P  
25  
10  
W
W
C
T
o
= 100 C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P  
C
T
o
Linear Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
0.20  
48  
W/ C  
Single Pulsed Avalanche Current, L = 100µH (See Test Figure). . . . . . . . . . . . . . . . . . . . . . . . . I  
A
A
A
AS  
Continuous Source Current (Body Diode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I  
12  
S
SM  
Pulsed Source Current (Body Diode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I  
48  
o
Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T , T  
-55 to 150  
300  
C
J
STG  
o
Lead Temperature (During Soldering) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T  
(Distance >0.063in (1.6mm) from Case, 10s Max)  
C
L
Weight (Typical)  
1.0 (Typical)  
g
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the  
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.  
NOTE: Current is limited by the package capability.  
o
Electrical Specifications  
T = 25 C, Unless Otherwise Specified  
C
PARAMETER  
SYMBOL  
BV  
TEST CONDITIONS  
= 1mA, V = 0V  
MIN  
TYP  
MAX  
-
UNITS  
V
Drain to Source Breakdown Voltage  
Gate Threshold Voltage  
I
100  
-
DSS  
D
GS  
o
V
V
I
= V  
,
T
T
T
T
T
T
T
= -55 C  
-
-
5.5  
4.5  
-
V
GS(TH)  
GS  
= 1mA  
DS  
C
C
C
C
C
C
C
o
D
= 25 C  
2.0  
-
V
o
= 125 C  
1.0  
-
-
V
o
Zero Gate Voltage Drain Current  
Gate to Source Leakage Current  
I
V
V
= 80V,  
DS  
= 25 C  
-
25  
250  
100  
200  
0.972  
0.080  
0.129  
20  
50  
35  
30  
35  
13  
12  
-
µA  
µA  
nA  
nA  
V
DSS  
= 0V  
o
GS  
= 125 C  
-
-
o
I
V
= ±30V  
= 25 C  
-
-
GSS  
GS  
o
= 125 C  
-
-
Drain to Source On-State Voltage  
Drain to Source On Resistance  
V
V
= 12V, I = 12A  
-
-
DS(ON)  
GS  
D
o
r
I
V
= 8A,  
T
T
= 25 C  
-
0.068  
DS(ON)12  
D
C
= 12V  
o
GS  
= 125 C  
-
-
-
C
Turn-On Delay Time  
Rise Time  
t
V
R
R
= 50V, I = 12A,  
-
ns  
ns  
ns  
ns  
nC  
nC  
nC  
nC  
nC  
V
d(ON)  
DD  
D
= 4.17, V = 12V,  
L
GS  
t
-
-
r
= 7.5Ω  
GS  
Turn-Off Delay Time  
Fall Time  
t
-
-
d(OFF)  
t
-
-
f
Total Gate Charge  
Gate Charge Source  
Gate Charge Drain  
Gate Charge at 20V  
Threshold Gate Charge  
Plateau Voltage  
Q
V
= 0V to 12V  
V
= 50V,  
-
30  
10  
9
g(12)  
GS  
DD  
= 12A  
I
D
Q
Q
-
gs  
-
gd  
Q
V
V
= 0V to 20V  
= 0V to 2V  
-
48  
3
g(20)  
GS  
Q
-
-
g(TH)  
GS  
V
I
= 12A, V  
D DS  
= 15V  
= 0V,  
-
6.5  
1380  
380  
20  
-
-
(PLATEAU)  
Input Capacitance  
Output Capacitance  
Reverse Transfer Capacitance  
C
V
= 25V, V  
GS  
-
-
pF  
pF  
pF  
ISS  
DS  
f = 1MHz  
C
C
-
-
OSS  
RSS  
-
-
o
Thermal Resistance Junction to Case  
R
-
5.0  
C/W  
JC  
θ
©2001 Fairchild Semiconductor Corporation  
FSGL130R Rev. B  
FSGL130R  
Source to Drain Diode Specifications  
PARAMETER  
Forward Voltage  
SYMBOL  
TEST CONDITIONS  
MIN  
TYP  
MAX  
1.5  
160  
-
UNITS  
V
V
I
I
= 12A  
-
-
-
-
-
SD  
SD  
Reverse Recovery Time  
Reverse Recovery Charge  
t
= 12A, dI /dt = 100A/µs  
ns  
rr  
SD  
SD  
Q
0.68  
µC  
RR  
o
Electrical Specifications up to 100 krad T = 25 C, Unless Otherwise Specified  
C
PARAMETER  
Drain to Source Breakdown Volts  
Gate to Source Threshold Volts  
Gate to Body Leakage  
SYMBOL  
BV  
TEST CONDITIONS  
= 0, I = 1mA  
MIN  
MAX  
-
UNITS  
(Note 3)  
V
V
V
V
V
V
100  
V
V
DSS  
GS(TH)  
GS  
GS  
GS  
GS  
GS  
GS  
D
(Note 3)  
V
= V , I = 1mA  
DS  
2.0  
4.5  
D
(Notes 2, 3)  
(Note 3)  
I
= ±30V, V  
= 0V  
-
-
-
-
100  
25  
nA  
µA  
V
GSS  
DS  
= 80V  
Zero Gate Leakage  
I
= 0, V  
DS  
DSS  
Drain to Source On-State Volts  
Drain to Source On Resistance  
NOTES:  
(Notes 1, 3)  
(Notes 1, 3)  
V
= 12V, I = 12A  
0.972  
0.080  
DS(ON)  
D
r
= 12V, I = 8A  
DS(ON)12  
D
1. Pulse test, 300µs Max.  
2. Absolute value.  
3. Insitu Gamma bias must be sampled for both V  
= 12V, V  
DS  
= 0V and V  
GS  
= 0V, V  
DS  
= 80% BV  
.
DSS  
GS  
Single Event Effects (SEB, SEGR) Note 4  
ENVIRONMENT (NOTE 5)  
(NOTE 6)  
APPLIED  
(NOTE 7)  
TYPICAL LET  
(MeV/mg/cm)  
TYPICAL  
RANGE (µ)  
V
BIAS  
MAXIMUM  
GS  
(V)  
TEST  
SYMBOL  
V
BIAS (V)  
100  
100  
50  
DS  
Single Event Effects Safe Operating Area  
SEESOA  
37  
60  
60  
82  
82  
36  
32  
32  
28  
28  
-10  
-5  
-8  
0
80  
-5  
50  
NOTES:  
4. Testing conducted at Brookhaven National Labs or Texas A&M.  
2
o
5. Fluence = 1E5 ions/cm (Typical), T = 25 C.  
6. Ion Species: LET = 37, Br or Kr; LET = 60, I or Xe; LET = 82, Au.  
7. Does not exhibit Single Event Burnout (SEB) or Single Event Gate Rupture (SEGR).  
Performance Curves Unless Otherwise Specified  
2
2
LET = 37MeV/mg/cm , RANGE = 36µ  
LET = 60MeV/mg/cm , RANGE = 32µ  
2
120  
100  
80  
60  
40  
20  
0
LET = 82MeV/mg/cm , RANGE = 28µ  
120  
100  
80  
60  
40  
20  
0
2
LET = 37  
FLUENCE = 1E5 IONS/cm (TYPICAL)  
LET = 82  
LET = 60  
0
4
8
12  
16  
20  
BIAS (V)  
GS  
24  
28  
32  
0
-2  
-4  
-6  
(V)  
-8  
-10  
-12  
V
NEGATIVE V  
GS  
FIGURE 1. SINGLE EVENT EFFECTS SAFE OPERATING AREA  
FIGURE 2. TYPICAL SEE SIGNATURE CURVE  
©2001 Fairchild Semiconductor Corporation  
FSGL130R Rev. B  
FSGL130R  
Performance Curves Unless Otherwise Specified (Continued)  
1E-3  
14  
12  
10  
8
1E-4  
ILM = 10A  
30A  
1E-5  
100A  
6
300A  
4
1E-6  
2
0
1E-7  
-50  
0
50  
100  
o
150  
10  
30  
100  
300  
1000  
T
, CASE TEMPERATURE ( C)  
DRAIN SUPPLY (V)  
C
FIGURE 3. TYPICAL DRAIN INDUCTANCE REQUIRED TO  
LIMIT GAMMA DOT CURRENT TO I  
FIGURE 4. MAXIMUM CONTINUOUS DRAIN CURRENT vs  
TEMPERATURE  
AS  
200  
100  
o
T
= 25 C  
C
12V  
Q
100µs  
G
10  
1
1ms  
Q
Q
GD  
GS  
OPERATION IN THIS  
AREA MAY BE  
10ms  
V
G
LIMITED BY r  
DS(ON)  
0.10  
1
10  
100  
300  
CHARGE  
V
, DRAIN TO SOURCE VOLTAGE (V)  
DS  
FIGURE 5. FORWARD BIAS SAFE OPERATING AREA  
FIGURE 6. BASIC GATE CHARGE WAVEFORM  
100  
2.5  
V
GS  
= 14V  
= 12V  
= 10V  
= 8V  
PULSE DURATION = 250ms, V  
GS  
= 12V, I = 8A  
D
V
GS  
80  
60  
40  
20  
0
V
2.0  
1.5  
1.0  
0.5  
0.0  
GS  
V
GS  
V
= 6V  
GS  
V
= 6 VOLTS  
GS  
0
2
4
6
8
10  
-80  
-40  
0
40  
80  
120  
160  
o
T , JUNCTION TEMPERATURE ( C)  
V
, DRAIN TO SOURCE VOLTAGE (V)  
J
DS  
FIGURE 7. TYPICAL NORMALIZED r  
TEMPERATURE  
vs JUNCTION  
FIGURE 8. TYPICAL OUTPUT CHARACTERISTICS  
DS(ON)  
©2001 Fairchild Semiconductor Corporation  
FSGL130R Rev. B  
FSGL130R  
Performance Curves Unless Otherwise Specified (Continued)  
10  
1
0.5  
0.2  
0.1  
0.1  
0.05  
0.02  
0.01  
P
DM  
SINGLE PULSE  
0.01  
NOTES:  
DUTY FACTOR: D = t /t  
t
1
2
+ T  
1
t
PEAK T = P  
DM  
x Z  
2
J
JC  
C
θ
0.001  
-5  
-4  
-3  
10  
-2  
-1  
0
1
10  
10  
10  
10  
10  
10  
t, RECTANGULAR PULSE DURATION (s)  
FIGURE 9. NORMALIZED MAXIMUM TRANSIENT THERMAL RESPONSE  
100  
o
STARTING T = 25 C  
J
o
STARTING T = 150 C  
J
10  
IF R = 0  
t
= (L) (I ) / (1.3 RATED BV - V  
DSS DD  
)
AV  
IF R 0  
= (L/R) ln [(I *R) / (1.3 RATED BV  
AS  
t
- V ) + 1]  
DD  
AV  
AS  
0.1  
, TIME IN AVALANCHE (ms)  
DSS  
1
0.01  
1
10  
t
AV  
FIGURE 10. UNCLAMPED INDUCTIVE SWITCHING  
Test Circuits and Waveforms  
ELECTRONIC SWITCH OPENS  
WHEN I IS REACHED  
AS  
V
DS  
L
+
I
-
BV  
DSS  
CURRENT  
TRANSFORMER  
AS  
t
P
V
DS  
I
AS  
V
VARY t TO OBTAIN  
DD  
P
+
50Ω  
REQUIRED PEAK I  
AS  
V
DD  
V
20V  
GS  
-
50V-150V  
DUT  
50Ω  
t
P
0V  
t
AV  
FIGURE 11. UNCLAMPED ENERGY TEST CIRCUIT  
FIGURE 12. UNCLAMPED ENERGY WAVEFORMS  
©2001 Fairchild Semiconductor Corporation  
FSGL130R Rev. B  
FSGL130R  
Test Circuits and Waveforms (Continued)  
t
ON  
t
OFF  
t
d(OFF)  
V
DD  
t
d(ON)  
t
t
f
r
R
L
V
DS  
90%  
90%  
V
DS  
V
= 12V  
GS  
10%  
10%  
DUT  
0V  
90%  
50%  
R
GS  
50%  
V
GS  
PULSE WIDTH  
10%  
FIGURE 13. RESISTIVE SWITCHING TEST CIRCUIT  
FIGURE 14. RESISTIVE SWITCHING WAVEFORMS  
Screening Information  
Screening is performed in accordance with the latest revision in effect of MIL-PRF-19500, (Screening Information Table).  
o
Delta Tests and Limits (JANTXV Equivalent, JANS Equivalent) T = 25 C, Unless Otherwise Specified  
C
PARAMETER  
Gate to Source Leakage Current  
Zero Gate Voltage Drain Current  
Drain to Source On Resistance  
Gate Threshold Voltage  
NOTES:  
SYMBOL  
TEST CONDITIONS  
= ±30V  
MAX  
UNITS  
nA  
I
V
V
±20 (Note 7)  
±25 (Note 7)  
±20% (Note 8)  
±20% (Note 8)  
GSS  
GS  
I
= 80% Rated Value  
o
µA  
DSS  
DS  
r
T
= 25 C at Rated I  
D
DS(ON)  
C
V
I
= 1.0mA  
V
GS(TH)  
D
8. Or 100% of Initial Reading (whichever is greater).  
9. Of Initial Reading.  
Screening Information  
TEST  
JANTXV EQUIVALENT  
= 20V, L = 0.1mH; Limit = 48A  
JANS EQUIVALENT  
Unclamped Inductive Switching  
Thermal Response  
Gate Stress  
V
V
= 20V, L = 0.1mH; Limit = 48A  
GS(PEAK)  
GS(PEAK)  
t
= 10ms; V = 25V; I = 1A; LIMIT = 60mV  
t
= 10ms; V = 25V; I = 1A; LIMIT = 60mV  
H
H
H
H
H
H
V
= 45V, t = 250µs  
V
= 45V, t = 250µs  
GS  
GS  
Pind  
Optional  
Required  
MIL-PRF-19500 Group A,  
Subgroup 2 (All Static Tests at 25 C)  
Pre Burn-In Tests (Note 9)  
MIL-PRF-19500 Group A,  
Subgroup 2 (All Static Tests at 25 C)  
o
o
Steady State Gate  
Bias (Gate Stress)  
MIL-PRF-750, Method 1042, Condition B  
MIL-PRF-750, Method 1042, Condition B  
V
= 80% of Rated Value,  
V
= 80% of Rated Value,  
GS  
= 150 C, Time = 48 hours  
GS  
T = 150 C, Time = 48 hours  
A
o
o
T
A
Interim Electrical Tests (Note 9)  
All Delta Parameters Listed in the Delta Tests and  
Limits Table  
All Delta Parameters Listed in the Delta Tests and  
Limits Table  
Steady State Reverse  
Bias (Drain Stress)  
MIL-PRF-750, Method 1042, Condition A  
MIL-PRF-750, Method 1042, Condition A  
V
= 80% of Rated Value,  
V
= 80% of Rated Value,  
DS  
= 150 C, Time = 160 hours  
DS  
T = 150 C, Time = 240 hours  
A
o
o
T
A
PDA  
10%  
5%  
Final Electrical Tests (Note 9)  
MIL-PRF-19500, Group A, Subgroup 2  
MIL-PRF-19500, Group A,  
Subgroups 2 and 3  
NOTE:  
10. Test limits are identical pre and post burn-in.  
Additional Tests  
PARAMETER  
Safe Operating Area  
Thermal Impedance  
SYMBOL  
TEST CONDITIONS  
= 80V, t = 10ms  
MAX  
1.4  
UNITS  
A
SOA  
V
DS  
= 500ms; V = 25V; I = 1A  
V  
SD  
t
230  
mV  
H
H
H
©2001 Fairchild Semiconductor Corporation  
FSGL130R Rev. B  
FSGL130R  
Rad Hard Data Packages - Fairchild Power Transistors  
TXV Equivalent  
Class S - Equivalents  
1. RAD HARD TXV EQUIVALENT - STANDARD DATA  
PACKAGE  
1. RAD HARD “S” EQUIVALENT - STANDARD DATA  
PACKAGE  
A. Certificate of Compliance  
A. Certificate of Compliance  
B. Serialization Records  
C. Assembly Flow Chart  
D. SEM Photos and Report  
B. Assembly Flow Chart  
C. Preconditioning - Attributes Data Sheet  
D. Group A  
E. Group B  
F. Group C  
G. Group D  
- Attributes Data Sheet  
- Attributes Data Sheet  
- Attributes Data Sheet  
- Attributes Data Sheet  
E. Preconditioning - Attributes Data Sheet  
- HTRB - Hi Temp Gate Stress Post  
Reverse Bias Data and Delta Data  
- HTRB - Hi Temp Drain Stress Post  
Reverse Bias Delta Data  
2. RAD HARD TXV EQUIVALENT - OPTIONAL DATA  
PACKAGE  
F. Group A  
G. Group B  
H. Group C  
I. Group D  
- Attributes Data Sheet  
- Attributes Data Sheet  
- Attributes Data Sheet  
- Attributes Data Sheet  
A. Certificate of Compliance  
B. Assembly Flow Chart  
C. Preconditioning - Attributes Data Sheet  
- Pre and Post Burn-In Read and Record  
Data  
2. RAD HARD MAX. “S” EQUIVALENT - OPTIONAL  
DATA PACKAGE  
D. Group A  
E. Group B  
- Attributes Data Sheet  
A. Certificate of Compliance  
B. Serialization Records  
C. Assembly Flow Chart  
D. SEM Photos and Report  
- Attributes Data Sheet  
- Pre and Post Read and Record Data for  
Intermittent Operating Life (Subgroup B3)  
- Bond Strength Data (Subgroup B3)  
- Pre and Post High Temperature Operating  
Life Read and Record Data (Subgroup B6)  
E. Preconditioning - Attributes Data Sheet  
- HTRB - Hi Temp Gate Stress Post  
Reverse Bias Data and Delta Data  
- HTRB - Hi Temp Drain Stress Post  
Reverse Bias Delta Data  
F. Group C  
G. Group D  
- Attributes Data Sheet  
- Pre and Post Read and Record Data for  
Intermittent Operating Life (Subgroup C6)  
- Bond Strength Data (Subgroup C6)  
- X-Ray and X-Ray Report  
- Attributes Data Sheet  
- Pre and Post RAD Read and Record Data  
F. Group A  
G. Group B  
H. Group C  
I. Group D  
- Attributes Data Sheet  
- Subgroups A2, A3, A4, A5 and A7 Data  
- Attributes Data Sheet  
- Subgroups B1, B3, B4, B5 and B6 Data  
- Attributes Data Sheet  
- Subgroups C1, C2, C3 and C6 Data  
- Attributes Data Sheet  
- Pre and Post Radiation Data  
©2001 Fairchild Semiconductor Corporation  
FSGL130R Rev. B  

相关型号:

FSGL130R3

TRANSISTOR | MOSFET | N-CHANNEL | 100V V(BR)DSS | 12A I(D) | TO-205AF
ETC

FSGL130R4

TRANSISTOR | MOSFET | N-CHANNEL | 100V V(BR)DSS | 12A I(D) | TO-205AF
ETC

FSGL134D1

Power Field-Effect Transistor, 10A I(D), 150V, 0.125ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-205AF, HERMETIC SEALED, METAL CAN-3
FAIRCHILD

FSGL134R3

Power Field-Effect Transistor, 10A I(D), 150V, 0.125ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-205AF, HERMETIC SEALED, METAL CAN-3
FAIRCHILD

FSGL134R4

Power Field-Effect Transistor, 10A I(D), 150V, 0.125ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-205AF, HERMETIC SEALED, METAL CAN-3
FAIRCHILD

FSGL230D1

8A, 200V, 0.18ohm, N-CHANNEL, Si, POWER, MOSFET, TO-205AF, HERMETIC SEALED, METAL CAN-3
RENESAS

FSGL230R3

8A, 200V, 0.18ohm, N-CHANNEL, Si, POWER, MOSFET, TO-205AF, HERMETIC SEALED, METAL CAN-3
RENESAS

FSGL230R4

8A, 200V, 0.18ohm, N-CHANNEL, Si, POWER, MOSFET, TO-205AF, HERMETIC SEALED, METAL CAN-3
RENESAS

FSGL234D1

TRANSISTOR | MOSFET | N-CHANNEL | 250V V(BR)DSS | 7A I(D) | TO-205AF
ETC

FSGL234R3

TRANSISTOR | MOSFET | N-CHANNEL | 250V V(BR)DSS | 7A I(D) | TO-205AF
ETC

FSGL234R4

TRANSISTOR | MOSFET | N-CHANNEL | 250V V(BR)DSS | 7A I(D) | TO-205AF
ETC

FSGM0465R

Green-Mode Fairchild Power Switch
FAIRCHILD