93-21UYOC/S530-XX/TR8 [EVERLIGHT]
High Performance SMD LED with Reflector; 高性能SMD LED与反射型号: | 93-21UYOC/S530-XX/TR8 |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | High Performance SMD LED with Reflector |
文件: | 总9页 (文件大小:156K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
High Performance SMD LED with Reflector
93-21UYOC/S530-XX/TR8
Features
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Eia std. package.
․IC compatible.
․Pb- free
․The product itself will remain within RoHS
compliant version.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Indicator and backlight for audio and video equipment
․Indicator and backlight for battery driven equipment.
․Flat backlight for LCD, switch and symbol.
․Light pipe application.
․General use.
Device Selection Guide
Chip
Lens Color
Material
Emitted Color
AlGaInP
Brilliant Orange
Water Clear
Everlight Electronics Co., Ltd.
Device No. : DSE-931-073
http://www.everlight.com
Prepared date:20-Sep-2005
Rev.2
Page: 1 of 9
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYOC/S530-XX/TR8
Package Outline Dimensions
Anode mark
3.0± 0.1
4.6± 0.2
2.7± 0.1
-
+
Polarity
0.26± 0.1
For reflow soldering (propose)
4.34± 0.1
0.74± 0.1
0.74± 0.1
Notes: All dimensions are in millimeters.
Everlight Electronics Co., Ltd.
Device No. : DSE-931-073
http://www.everlight.com
Prepared date:20-Sep-2005
Rev.2
Page: 2 of 9
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYOC/S530-XX/TR8
Absolute Maximum Ratings (Ta=25℃)
Parameter
Reverse Voltage
Symbol
VR
Rating
Unit
V
5
25
Forward Current
IF
mA
℃
Operating Temperature
Storage Temperature
Topr
Tstg
ESD
Pd
-40 ~ +85
-40 ~ +100
2000
℃
Electrostatic Discharge(HBM)
Power Dissipation
V
60
mW
mA
Peak Forward Current (Duty 1/10 @1KHz)
IFP
60
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Electro-Optical Characteristics (Ta=25℃)
*Chip
Parameter
Symbol
Min.
Typ.
Max.
-----
-----
-----
-----
-----
-----
Unit
mcd
Condition
IF=20mA
Rank
17
20
23
60
A2
A3
A4
A5
A6
-----
Luminous intensity
IV
25
75
32
95
40
120
130
2θ1/2
λp
deg
nm
IF=20mA
IF=20mA
Viewing Angle
-----
-----
-----
Peak Wavelength
611
605
-----
-----
-----
-----
-----
-----
Dominant
λd
nm
nm
IF=20mA
Wavelength
Spectrum Radiation
Bandwidth
△λ
-----
IF=20mA
IF=20mA
VR=5V
17
2.0
Forward Voltage
Reverse Current
VF
IR
-----
-----
-----
-----
2.4
10
V
μA
-----
*93-21UYOC/S530-XX/TR8
Chip Rank
Everlight Electronics Co., Ltd.
http://www.everlight.com
Prepared date:20-Sep-2005
Rev.2
Page: 3 of 9
Device No. : DSE-931-073
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYOC/S530-XX/TR8
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
Device No. : DSE-931-073
http://www.everlight.com
Prepared date:20-Sep-2005
Rev.2
Page: 4 of 9
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYOC/S530-XX/TR8
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-931-073
http://www.everlight.com
Prepared date:20-Sep-2005
Rev.2
Page: 5 of 9
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYOC/S530-XX/TR8
Carrier Tape Dimensions: Loaded quantity per reel 2000 PCS/reel
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No. : DSE-931-073
http://www.everlight.com
Prepared date:20-Sep-2005
Rev.2
Page: 6 of 9
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYOC/S530-XX/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Sample
No.
1
Items
Test Condition
Ac/Re
Hours/Cycles Size
Temp. : 260℃±5℃
Min. 5sec.
6 Min.
Solder Heat
22 PCS. 0/1
H : +100℃ 15min
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS. 0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
300 Cycles
3
4
22 PCS. 0/1
22 PCS. 0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS. 0/1
22PCS. 0/1
22 PCS. 0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No. : DSE-931-073
http://www.everlight.com
Prepared date:20-Sep-2005
Rev.2
Page: 7 of 9
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYOC/S530-XX/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
Everlight Electronics Co., Ltd.
Device No. : DSE-931-073
http://www.everlight.com
Prepared date:20-Sep-2005
Rev.2
Page: 8 of 9
Prepared by: Ray Yuan
EVERLIGHT ELECTRONICS CO.,LTD.
93-21UYOC/S530-XX/TR8
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DSE-931-073
http://www.everlight.com
Prepared date:20-Sep-2005
Rev.2
Page: 9 of 9
Prepared by: Ray Yuan
相关型号:
©2020 ICPDF网 联系我们和版权申明