FSUSB46UMX [FAIRCHILD]
Hi-Speed USB2.0 (480Mbps) DPST Switch with Dedicated Charger Port Detection; 高速USB2.0传输(480Mbps ) DPST开关,专用充电器端口检测型号: | FSUSB46UMX |
厂家: | FAIRCHILD SEMICONDUCTOR |
描述: | Hi-Speed USB2.0 (480Mbps) DPST Switch with Dedicated Charger Port Detection |
文件: | 总2页 (文件大小:442K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Click here for this datasheet
translated into Chinese!
July 2008
FSUSB46 — Hi-Speed USB2.0 (480Mbps) DPST Switch
with Dedicated Charger Port Detection
Features
Description
The FSUSB46 is a bi-directional, low-power, Hi-Speed,
USB2.0 switch. Configured as a double-pole, single-
throw switch (DPST) switch, it is optimized for switching
a Hi-Speed (480Mbps) source.
Low On Capacitance: 7.0pF Typical
Low On Resistance: 3.9Ω Typical
Low Power Consumption: 1μA Maximum
The FSUSB46 is compatible with the requirements of
USB2.0 and features an extremely low on capacitance
(CON) of 3.9pF. The wide bandwidth of this device
(720MHz) exceeds the bandwidth needed to pass the
third harmonic, resulting in signals with minimum edge
and phase distortion. Superior channel-to-channel
crosstalk also minimizes interference.
-15μA Maximum ICCT over an Expanded Voltage
Range (VIN=1.8V, VCC=4.3V)
Wide -3db Bandwidth: > 720MHz
Packaged in Pb-free, 8-Lead MicroPak™ (1.6mm
wide), US8 (3.1mm wide), and UMLP (1.4x1.4mm)
8kV ESD Rating, >16kV Power/GND ESD Rating
Power-Off Protection on All Ports When VCC=0V
-D+/D- Pins Tolerate up to 5.25V
The FSUSB46 contains special circuitry on the switch
I/O pins for applications where the VCC supply is
powered-off (VCC=0), which allows the device to
withstand an over-voltage condition. This device is
designed to minimize current consumption even when
the control voltage applied to the /OE pin is lower than
the supply voltage (VCC). This feature is especially
valuable to ultra-portable applications, such as cell
phones, allowing for direct interface with the general-
purpose I/Os of the baseband processor. An additional
feature is the detection of the 1-1 (high/high) state on
D+/D- to signal an interrupt (INT) to the processor when
entering a dedicated charging port mode of operation.
Applications
Cell phone, PDA, Digital Camera, and Notebook
LCD Monitor, TV, and Set-Top Box
IMPORTANT NOTE:
For additional performance information, please contact
analogswitch@fairchildsemi.com.
Ordering Information
Operating
Part Number
Package
Eco Status
Temperature Range
FSUSB46L8X
FSUSB46K8X
-40 to +85°C
-40 to +85°C
8-Lead MicroPak™ 1.6mm Wide
RoHS
Green
8-Lead US8, JEDEC MO187, Variation CA 3.1mm
8-Lead Ultrathin Molded Leadless Package (UMLP),
1.2 x 1.4mm
FSUSB46UMX
-40 to +85°C
Green
For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
MicroPak™ is a trademark of Fairchild Semiconductor Corporation.
Figure 1. Analog Symbol
© 2007 Fairchild Semiconductor Corporation
FSUSB46 • Rev. 1.0.3
www.fairchildsemi.com
© 2007 Fairchild Semiconductor Corporation
FSUSB46 • Rev. 1.0.3
www.fairchildsemi.com
12
相关型号:
©2020 ICPDF网 联系我们和版权申明