FXU-HC520-62.5 [FOX]
HCMOS Output Clock Oscillator, 62.5MHz Nom;型号: | FXU-HC520-62.5 |
厂家: | FOX ELECTRONICS |
描述: | HCMOS Output Clock Oscillator, 62.5MHz Nom |
文件: | 总11页 (文件大小:594K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRELIMINARY SPECIFICATIONS
Model: FXU-HC52 SERIES
HCMOS 5 x 3.2mm 2.5V Oscillator Freq: 0.016 MHz to 167 MHz*
Rev. 02/12/2014
Features
ULTRA Low Jitter
Low Cost
XPRESS Delivery
Frequency Resolution to six decimal places
Stabilities to ± 20 PPM
-20 to +70°C or -40 to +85°C operating temperatures
Tri-State Enable / Disable Feature
Industry Standard Package, Footprint & Pin-Out
Fully RoHS compliant
Applications
ANY application requiring a high
performance HCMOS oscillator
SONET
Gold over Nickel Termination Finish
Serial ID with Comprehensive Traceability
Ethernet
Storage Area Network
Broadband Access
V
DD
Enable / Disable
Microprocessors / DSP / FPGA
Industrial Controllers
Test and Measurement Equipment
FOX
OUTPUT
XPRESSO
ASICs
GND
For more information -- Click on the drawing
Contents
Description
page
2
3
3
4
5
5
6
6
6
7
8
8
Model Selection & Part Number Guide
Electrical Characteristic
Absolute Maximums
Output Wave Characteristics
Phase Noise
The Fox XPRESSO-ULTRA Crystal Oscillator is a
breakthrough in configurable Frequency Control
Solutions. XPRESSO-ULTRA utilizes a family of
proprietary ASICs, designed and developed by Fox,
with a key focus on noise reduction technologies.
Jitter
Pin Assignment
The 4th order Delta Sigma Modulator reduces noise to
the levels that are comparable to traditional Bulk
Quartz and SAW oscillators. The ASICs family has
the ability to select the output type and supply
voltage.
Recommended Circuit
Reflow
Mechanical Drawing and Pad Layout
Tape and Reel Specification
Label
Traceability – LOT Number & Serial Identification
Mechanical Test
Other XPRESSO Series Links
Fox Contact Information
9
10
11
11
With the XPRESSO-ULTRA lead-time, low cost, low
noise, wide frequency range, excellent ambient
performance, XPRESSO-ULTRA is an excellent choice
over the conventional technologies.
Finished XPRESSO-ULTRA parts are 100% final
Note * – Higher frequencies are available.
Contact Fox Technical Support for details.
Page 1 of 11
Fox Electronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554
An Integrated Device Technology, Inc. company FOXonline.com
PRELIMINARY SPECIFICATIONS
FXU-HC52 Series
Output Wave Characteristics
Maximum Value
(unless otherwise noted)
10%VDD
Parameters
Low Output Voltage
Symbol
Condition
0.016 MHz to 167 MHz
VOL
0.016 MHz to 167 MHz
High Output Voltage
VOH
90%VDD Minimum
Output Symmetry
@ 50% VDD Level (See Drawing Below)
Output Enable (PIN # 1) Voltage
0.016 to 62.5 MHz
62.5+ to 167 MHz
45% ~ 55%
40% ~ 60%
≥ 70% VDD
VIH
VIL
Output Disable (PIN # 1) Voltage
≤ 30% VDD
Cycle Rise Time
TR
TF
0.016 to 167 MHz
0.016 to 167 MHz
2.0 nS Typical
(10%~90%VDD - See Drawing Below)
Cycle Fall Time
1.0 nS Typical
(90%~10%VDD - See Drawing Below)
Page 4 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-HC52 Series
Phase Noise (typical measurements at 125 MHz)
HCMOS Phase Jitter (typical measurement at 125 MHz)
Frequency
Phase Jitter (pS)
125 MHz
0.36 (per SONET OC-48: 12kHz to 20 MHz)
Phase Jitter is integrated from Agilent 5052A Signal Noise Analyzer; measured directly into 50 ohm input; VDD =2.5V.
)
Page 5 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-HC52 Series
Pin Description and Recommended Circuit
Pin #
Name
E / D 1
GND
Type
Input
Ground
Output
Power
Hi Z
Function
Enable / Disable Control of Output (0 = Disabled)
Electrical Ground for VDD
HCMOS Oscillator Output
Power Supply Source Voltage
No Connection (Factory Use ONLY)
1
2
3
Output
4
VDD 2
Test
Points
N. C.
NOTES:
1 Includes pull-up resistor to VDD to provide output when the pin (1) is No Connect.
2 Installation should include a 0.01µF bypass capacitor placed between VDD
(Pin 4) and GND (Pin 2) to minimize power supply line noise.
4
1
E / D
VDD
TP
TP
N. C.
N. C
.
2
3
GND
Output
Terminations as viewed from the Top
NOTE: XPRESSO-Ultra HCMOS XOs are designed to
fit on Industry Standard, 4 pad layouts
Enable / Disable Control
Pin # 1 (state)
OPEN (No Connection)
Output (Pin #3)
ACTIVE Output
ACTIVE Output
High Impedance
“1” Level VIH ≥ 70% VDD
“0” Level VIL ≤ 30% VDD
Soldering Reflow Profile (2 times Maximum at 260°C for 10 seconds MAX)
Page 6 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-HC52 Series
Mechanical Dimensional Drawing & Pad Layout
Actual part marking
is depicted.
See Traceability (pg. 9)
for more information
NOTE: XPRESSO-ULTRA HCMOS XOs are
designed to fit on Industry Standard, 4 pad layouts
Pin Connections
#1) E/D
#2) GND
#3) Output
#4) VDD
*TP are test points and are NC.
Drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary
Page 7 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-HC52 Series
Tape and Reel Dimensions
4.0mm
Ø1.5mm
12mm
2.15mm
8.0mm
2k Reel Dimensions
in mm
1k Reel Dimensions
2.0
in mm
2.0
120°
Ø21.0
Ø13.0
Ø21.0
255.0
Ø13.0
2.0
80.0
178.0
62.0
2.0
2.0
17.5
17.5
Labeling (Reels and smaller packaging are labeled with the below)
851A-125-3
Fox Part Number: 851A-125-3
Quantity:
2000 pieces
FXU-HC525R-125-5
1335
Description: FXU-HC525R-125
Date Code
1335
(YYWW 2013 35th wk)
LOT #
24435
If traceability should become necessary
An additional identification code is contained internally if tracking should ever be necessary
Page 8 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-HC52 Series
Traceability – LOT Number & Serial Identification
Page 9 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-HC52 Series
Mechanical Testing
Parameter
Test Method
MIL-STD-202 Method 213
Condition C
Mechanical Shock
MIL-STD-202 Method 204
5g's for 20 minutes
12 cycles of each 3 orientations: X, Y, Z
Mechanical Vibration
Under Power @ 125°C for 1000 Hours
He pressure: 4 ±1 kgf / cm2 2 Hour soak
High Temperature Operating Life (HTOL)
Hermetic Seal
Page 10 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
PRELIMINARY SPECIFICATIONS
FXU-HC52 Series
XpressO-ULTRA Home
XpressO-ULTRA XOs
XpressO Brochure
Patent Numbers:
US 6,664,860, US 5,960,403, US 5,952,890; US 5,960,405; US 6,188,290;
Foreign Patents: R.S.A. 98/0866, R.O.C. 120851; Singapore 67081, 67082; EP 0958652
China ZL 98802217.6, Malaysia MY-118540-A, Philippines 1-1998-000245, Hong Kong #HK1026079, Mexico #232179
US and Foreign Patents Pending
XpressO® Fox Electronics
Contact Information
Fox EMEA
Tel: +44.1283.568153
Email: www.foxonline.com/email.htm
Fox Japan
(USA)-Worldwide Headquarters
Tel: 888-GET-2-FOX
Outside US: +1.239.693.0099,
Fax:+1.239.693.1554
Tel:+81.3.3374.2079,
Fax: +81.3.3377.5221
Email: www.foxonline.com/email.htm
Email: www.foxonline.com/email.htm
Fox Singapore
Tel:+886-2-22073427,
Email: www.foxonline.com/email.htm
The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no
responsibility is assumed by Fox Electronics for inaccuracies.
Page 11 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
相关型号:
©2020 ICPDF网 联系我们和版权申明