FXU-HC738-167 [FOX]
HCMOS Output Clock Oscillator;型号: | FXU-HC738-167 |
厂家: | FOX ELECTRONICS |
描述: | HCMOS Output Clock Oscillator |
文件: | 总11页 (文件大小:234K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Model: FXU-HC73 SERIES
HCMOS 7 x 5mm 3.3V Oscillator
Freq: 0.016 MHz to 167MHz
Rev. 7/21/2015
Features
ULTRA Low Jitter
Low Cost
XPRESS Delivery
Frequency Resolution to six decimal places
Stabilities to ± 20 PPM
-20 to +70°C or -40 to +85°C operating temperatures
Tri-State Enable / Disable Feature
Industry Standard Package, Footprint & Pin-Out
Fully RoHS compliant
Applications
ANY application requiring a high
performance HCMOS oscillator
SONET
Gold over Nickel Termination Finish
Serial ID with Comprehensive Traceability
Ethernet
Storage Area Network
Broadband Access
V
DD
Enable / Disable
Microprocessors / DSP / FPGA
Industrial Controllers
Test and Measurement Equipment
FOX
OUTPUT
XPRESSO
ASICs
GND
For more information -- Click on the drawing
Contents
page
2
3
Description
Model Selection & Part Number Guide
Electrical Characteristic
Absolute Maximums
The Fox XPRESSO-ULTRA Crystal Oscillator is a
breakthrough in configurable Frequency Control
Solutions. XPRESSO-ULTRA utilizes a family of
proprietary ASICs, designed and developed by Fox,
with a key focus on noise reduction technologies.
3
Output Wave Characteristics
Phase Noise
Jitter
Pin Assignment
Recommended Circuit
Reflow
Mechanical Drawing and Pad Layout
Tape and Reel Specification
Label
Traceability – LOT Number & Serial Identification
Mechanical Test
4
5
5
6
6
6
7
8
8
9
10
11
11
The 4th order Delta Sigma Modulator reduces noise to
the levels that are comparable to traditional Bulk
Quartz and SAW oscillators. The ASICs family has
the ability to select the output type and supply
voltage.
Other XPRESSO Series Links
Fox Contact Information
With the XPRESSO-ULTRA lead-time, low cost, low
noise, wide frequency range, excellent ambient
performance, XPRESSO-ULTRA is an excellent choice
over the conventional technologies.
Finished XPRESSO-ULTRA parts are 100% final
tested.
Page 1 of 11
Fox Electronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554
An Integrated Device Technology, Inc. company FOXonline.com
FXU-HC73 Series
Model Selection Guide & Fox Part Number
STEP #1: Customer selects the Model Description and provides to Fox Customer Service
Model Description
FXU – H C 7 3 5 R – 156.25 Frequency (in MHz)
Resolutions to 6 places
past the decimal point
7 = 7 x 5mm
H = HCMOS
C = Ceramic
3 = 3.3 V
blank = -20°C to +70°C
R = -40°C to +85°C
0 = ± 100 PPM
5 = ± 50 PPM
6 = ± 25 PPM
X = HCMOS (comp 2nd output)
8 = ± 20 PPM (-20°C to +70°C)
STEP #2: The Fox Customer Service team provides a customer specific Part Number
for use on their Bill Of Materials (BOM).
Fox Part Number (The assigned Fox Part Number must be on the BOM – not the above Model Description)
(This will ensure receipt of the proper part)
855 – 156.25 – 3
The 1st Field
Product Code #
855 = FXU–HC7
855E = FXU-XC7
The 3rd Field
Fox Internally Generated Number
(If any specification changes,
the last digits change)
(The same specs for a different customer
also changes the last digits)
The 2nd Field
The Customer’s Frequency
This example, FXU-HC735R-156.25 = HCMOS Output, Ceramic, 7 x5mm Package, 3.3V,
±50 PPM Stability, -40 to +85°C Temperature Range, at 156.25 MHz
Page 2 of 11
© 2015 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
FXU-HC73 Series
Electrical Characteristics
Maximum Value
Parameters
Frequency Range
Frequency Stability 1
Symbol
Condition
(unless otherwise noted)
0.016 MHz to 167 MHz
100, 50, 25, 202 PPM
FO
0.016 MHz to 167 MHz
TO
Standard operating
Optional operating
Storage
-20°C to +70°C
-40°C to +85°C
-55°C to +125°C
Temperature Range
TSTG
VDD
Supply Voltage
Standard
3.3 V ± 5%
0.016 to 62.5 MHZ
62.5+ to 167 MHz
98 mA
108 mA
Input Current (@ Standard Load)
IDD
Output Load
Standard
15 pF
10 mS
100 nS
1
Start-Up Time
TS
Output Enable / Disable Time
Moisture Sensitivity Level
Termination Finish
MSL
JEDEC J-STD-20
Au
Note 1 – Stability is inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, aging, shock and vibration.
Note 2 –. ±20 PPM stability -20°C to +70°C only.
Absolute Maximum Ratings (Useful life may be impaired. For user guidelines only, not tested)
Maximum Value
Parameters
Input Voltage
Symbol
VDD
Condition
(unless otherwise noted)
–0.5V to +5.0V
–55°C to +105°C
–55°C to +125°C
125°C
Operating Temperature
Storage Temperature
Junction Temperature
ESD Sensitivity
TAMAX
TSTG
HBM
Human Body Model
1 kV
Page 3 of 11
© 2015 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
FXU-HC73 Series
Output Wave Characteristics
Maximum Value
(unless otherwise noted)
10%VDD
Parameters
Low Output Voltage
Symbol
VOL
Condition
0.016 MHz to 167 MHz
0.016 MHz to 167 MHz
High Output Voltage
VOH
90%VDD Minimum
Output Symmetry
0.016 to to 167 MHz
45% ~ 55%
@ 50% VP-P Level (See Drawing Below)
Output Enable Note1 (PIN # 1) Voltage
Output DisableNote1 (PIN # 1) Voltage
VIH
VIL
≥ 70% VDD
≤ 30% VDD
Cycle Rise Time
TR
TF
0.016 MHz to 167 MHz
0.016 MHz to 167 MHz
2.5 nS
2.5 nS
(10%~90%VDD - See Drawing Below)
Cycle Fall Time
(90%~10%VDD - See Drawing Below)
Page 4 of 11
© 2015 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
FXU-HC73 Series
Phase Noise (typical measurements at 156.25 MHz)
.
Jitter is frequency dependent. Below are typical values at 156.25 MHz.
HCMOS Phase Jitter & Time Interval Error (TIE)
TIE (pS)
(sigma of jitter distribution)
Phase Jitter (pS)
Frequency
(12kHz to 20MHz)
156.25 MHz
0.26
1.7
Phase Jitter is integrated from Agilent 5052A Signal Noise Analyzer; measured directly into 50 ohm input; VDD = 3.3V.
TIE was measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software; VDD = 3.3V.
Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications)
HCMOS Random & Deterministic Jitter Composition
Total Jitter (Tj)
Random (Rj) Deterministic (Dj)
Frequency
(14 x Rj) + Dj
(pS RMS)
(pS P-P)
156.25 MHz
0.6
6.1
14.8
Rj and Dj, measured on LeCroy SDA-6000A Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software.
Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications)
Page 5 of 11
© 2015 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
FXU-HC73 Series
Pin Description and Recommended Circuit
Pin #
Name
E / D 1
GND
Type
Logic
Ground
Output
Function
1
2
3
Enable / Disable Control of Output (0 = Disabled)
Electrical Ground for VDD
HCMOS Oscillator Output
Output
4
VDD 2
N. C.
Power
Hi Z
Power Supply Source Voltage
No Connection (Factory Use ONLY)
Test
Points
NOTES:
1
Includes pull-up resistor to VDD to provide output when the pin (1) is No Connect.
Installation should include a 0.1µF bypass capacitor placed between VDD
(Pin 4) and GND (Pin 2) to minimize power supply line noise.
2
4
1
E / D
VDD
TP
TP
N. C.
N. C
.
2
3
GND
Output
Terminations as viewed from the Top
NOTE: XPRESSO-Ultra HCMOS XOs are designed to
fit on Industry Standard, 4 pad layouts
Enable / Disable Control
Pin # 1 (state)
OPEN (No Connection)
Output (Pin #3)
ACTIVE Output
ACTIVE Output
High Impedance
“1” Level VIH ≥ 70% VDD
“0” Level VIL ≤ 30% VDD
Soldering Reflow Profile (2 times Maximum at 260°C for 10 seconds MAX)
Page 6 of 11
© 2015 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
FXU-HC73 Series
Actual part marking
is depicted.
See Traceability (pg. 9)
for more information
Pin Connections
#1) E/D
#2) GND
#3) Output
#4) VDD
*TP are test points and are NC.
Drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary
Page 7 of 11
© 2015 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
FXU-HC73 Series
Tape and Reel Dimensions
2k Reel Dimensions
in mm
1k Reel Dimensions
2.0
in mm
2.0
120°
Ø21.0
Ø13.0
Ø21.0
Ø13.0
2.0
80.0
255.0
178.0
62.0
2.0
2.0
17.5
17.5
Labeling (Reels and smaller packaging are labeled with the below)
855-156.25-3
Fox Part Number: 855-156.25-3
Quantity:
2000 pieces
FXU-HC735R-156.25
1335
Description: FXU-HC735R-156.25
Date Code
1335
(YYWW 2013 35th wk)
LOT #
24435
Page 8 of 11
© 2015 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
FXU-HC73 Series
Traceability – LOT Number & Serial Identification
Page 9 of 11
© 2015 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
FXU-HC73 Series
Mechanical Testing
Parameter
Test Method
MIL-STD-202 Method 213
Condition C
Mechanical Shock
MIL-STD-202 Method 204
5g's for 20 minutes
Mechanical Vibration
12 cycles of each 3 orientations: X, Y, Z
High Temperature Operating Life (HTOL)
Hermetic Seal
Under Power @ 125°C for 1000 Hours
MIL-STD-202F: Method 112D
Test condition C
He pressure: 4 ±1 kgf / cm2 2 Hour soak
Page 10 of 11
© 2015 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
FXU-HC73 Series
XpressO-ULTRA Home
XpressO-ULTRA XOs
XpressO Brochure
Patent Numbers:
US 6,664,860, US 5,960,403, US 5,952,890; US 5,960,405; US 6,188,290;
Foreign Patents: R.S.A. 98/0866, R.O.C. 120851; Singapore 67081, 67082; EP 0958652
China ZL 98802217.6, Malaysia MY-118540-A, Philippines 1-1998-000245, Hong Kong #HK1026079, Mexico #232179
US and Foreign Patents Pending
XpressO® Fox Electronics
Contact Information
Fox EMEA
Tel: +44.1283.568153
Email: www.foxonline.com/email.htm
Fox Singapore
Tel:+886-2-22073427,
Email: www.foxonline.com/email.htm
(USA)-Worldwide Headquarters
Tel: 888-GET-2-FOX
Outside US: +1.239.693.0099,
Fax:+1.239.693.1554
Email: www.foxonline.com/email.htm
The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no
responsibility is assumed by Fox Electronics for inaccuracies.
Page 11 of 11
© 2015 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company
相关型号:
©2020 ICPDF网 联系我们和版权申明