VF-60HU [FUJITSU]

1 POLE - 20/25/30A - Heavy power control;
VF-60HU
型号: VF-60HU
厂家: FUJITSU    FUJITSU
描述:

1 POLE - 20/25/30A - Heavy power control

文件: 总9页 (文件大小:184K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Non-promotional not for new designs  
POWER RELAY  
1 POLE - 20/25/30A - Heavy power control  
VF Series  
FEATURES  
UL, CSA, VDE recognized TV-15 rated  
1 form A contact (SPST-NO)  
Heavy duty 20 to 30A small power relay  
High inrush current and high surge voltage  
- Inrush current 65A  
- Surge strength 10,000V  
Printed circuit coil terminals type available  
Small package meets high density mounting requirement  
Flux proof sealing, RTII  
RoHS Compliant  
Please see page 7 for more information  
PARTNUMBER INFORMATION  
VF  
B
-
6
H
U
[Example]  
(a)  
(b) (*) (c) (d) (e)  
(a)  
(b)  
Relay type  
Terminal  
VF  
: VF Series  
Nil  
B
: Top -- All tab-terminal  
: Top -- Tab terminal (contacts)  
Bottom -- PCB terminal (coil and movable contact)  
: Top -- Tab terminal (coil)  
Screw tight terminal (contacts)  
: Top -- Screw tight terminal (contacts)  
Bottom -- PCB terminal (coil and movable contact)  
D
P
(c)  
(d)  
Coil rated voltage  
Contact rating  
6
: 3....60VDC  
Coil rating table at page 3  
H
M
L
: 30A (applicable for D.P.)  
: 25A  
: 20A  
(e)  
Approvals  
U
: UL, CSA, VDE rating acquired  
Note: Actual marking omits hyphen (-) of (*)  
1
VF SERIES  
SPECIFICATION  
Item  
30A type  
25A type  
20A type  
VFD, VFP - ( ) H  
1 form A (SPST-NO)  
Single  
VF ( ) - ( ) M  
VF ( ) - ( ) L  
Contact  
Data  
Conguration  
Construction  
Material  
Silver alloy (AgSnO2 ; AgSnOInO)  
Max. 30mOhm at 1A, 6VDC  
Resistance (initial)  
Resistive  
Motor  
30A, 250VAC  
2HP, 250VAC  
30A  
25A, 250VAC  
1.5HP, 250VAC  
25A  
20A, 250VAC  
1HP, 250VAC  
20A  
Contact rating  
Max. carrying current  
Max. switching voltage  
Max. switching power  
Max. switching current  
Min. switching load *  
Mechanical  
250VAC  
7,500VA  
30A  
6,250VA  
25A  
5,000VA  
20A  
1A, 10V  
Life  
Min. 5 x 106 operations  
Min. 100 x 103 operations  
Min. 200 x 103 operations  
1,200 to 1,250mW  
Resistive load  
Motor load  
Electrical  
(at contact rating)  
Coil Data  
Rated Power (at 20 ° C)  
Operate Power (at 20 ° C)  
Operating temperature range  
590 to 620mW  
-30 to +65 °C (no frost)  
Max. 20ms  
Timing Data Operate (at nominal voltage)  
Release (at nominal voltage)  
Max. 5ms (without diode)  
Min. 1,000MOhm at 500VDC  
1,200VAC (50/60Hz) 1min.  
Insulation  
Resistance (Initial)  
Dielectric strength  
Surge strength  
Open contacts  
Coil and contacts 4,000VAC (50/60Hz) 1min.  
Coil and contacts 10.000V/ 1.2 x 50μs standard wave  
Other  
Misoperation  
Endurance  
Misoperation  
Endurance  
10 to 55Hz double amplitude 1.5mm  
10 to 55Hz double amplitude 1.5mm  
Min. 200m/s² (11 ± 1ms)  
Min. 1,000m/s² (6 ± 1ms)  
Approximately 55 g  
Vibration Resistance  
Shock  
Weight  
Sealing  
Flux proof (RTII)  
* Minimum switching loads mentioned above are reference values. Please perform the conrmation test with actual  
load before production since reference values may vary according to switching frequencies, environmental contions  
and expected reliability levels.  
2
VF SERIES  
COIL RATING  
Rated Coil  
Coil  
Must Operate Must Release  
Coil Resistance  
+/- 10% (Ohm)  
Rated Power  
(mW)  
Voltage  
Voltage  
(VDC) *  
Voltage  
(VDC) *  
Code  
(VDC)  
3
5
3
5
7.5  
20  
2.1  
3.5  
0.3  
0.5  
0.6  
0.9  
1.2  
1.8  
2.4  
4.8  
6.0  
1,200  
1,250  
6
6
30  
4.2  
9
9
67  
6.3  
12  
18  
24  
48  
60  
12  
18  
24  
48  
60  
120  
270  
480  
1,920  
3,000  
8.4  
1,200  
12.6  
16.8  
33.6  
42.0  
Note: All values in the table are valid for 20°C and zero contact current.  
* Specied operate values are valid for pulse wave voltage.  
SAFETY STANDARDS  
Type  
UL  
Compliance  
UL 508 873  
Contact rating  
Flammability: UL 94-V0 (plastics)  
VF - ( ) - ( ) L  
E56140  
20A, 250VAC (resistive)  
1HP, 250VAC/125VAC  
TV-15, 120VAC  
CSA  
C22.2 No. 14  
LR 35579  
VF - ( ) - ( ) M  
25A, 250VAC (resistive)  
1.5HP, 250VAC  
TV-15, 120VAC  
VFD, VFP - ( ) - H  
30A, 250VAC (resistive)  
2HP, 250VAC  
TV-15, 120VAC  
VDE  
0435  
VF-(-;B)-LU: 20A, 250VAC resistive: 100K  
15A, 250VAC cos φ 0.7: 100K  
40017717  
VF-(-;B)-HU: 30A, 250VAC resistive: 100K  
22.5A, 250VAC cos φ 0.7: 100K  
3
VFSERIES
CHARACTERISTIC DATA  
REFERENCE DATA  
4
VF SERIES  
DIMENSIONS  
Dimensions  
Schematics  
PC board mounting  
hole layout  
(TOP VIEW)  
(TOP VIEW)  
VF-type  
VFB-type  
Unit: mm  
5
VF SERIES  
DIMENSIONS  
Dimensions  
Schematics  
PC board mounting  
hole layout  
(TOP VIEW)  
(TOP VIEW)  
VFD-type  
VFP-type  
Unit: mm  
6
VF SERIES  
RoHS Compliance and Lead Free Information  
1. General Information  
All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC  
including amendments.  
Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.  
(Amendment to Directive 2002/95/EC)  
All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes  
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf  
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specied.  
This material has been veried to be compatible with PbSn assembly process.  
2. Recommended Lead Free Solder Prole  
Recommended solder Sn-3.0Ag-0.5Cu.  
Flow Solder condition:  
Pre-heating:  
Soldering:  
maximum 120˚C  
dip within 5 sec. at  
260˚C solder bath  
Solder by Soldering Iron:  
Soldering Iron  
Temperature: maximum 360˚C  
Duration:  
maximum 3 sec.  
We highly recommend that you conrm your actual solder conditions  
3. Moisture Sensitivity  
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.  
4. Tin Whiskers  
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length  
whisker was found by our in house test.  
7
VF SERIES  
Fujitsu Components International Headquarter Ofces  
Japan  
Europe  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Tel: (81-3) 5449-7010  
Tel: (31-23) 5560910  
Fax: (81-3) 5449-2626  
Email: promothq@ft.ed.fujitsu.com  
Web: www.fcl.fujitsu.com  
Fax: (31-23) 5560950  
Email: info@fceu.fujitsu.com  
Web: emea.fujitsu.com/components/  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Asia Pacic  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#01-01 Citilink Warehouse Complex  
Singapore 118529  
Fax: (1-408) 745-4970  
Tel: (65) 6375-8560  
Email: components@us.fujitsu.com  
Web: http://us.fujitsu.com/components  
Fax: (65) 6273-3021  
Email: fcal@fcal.fujitsu.com  
Web: http://www.fujitsu.com/sg/services/micro/components/  
©2011 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective  
owners.  
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for gen-  
eral information purposes.  
The use of the contents, data and information provided in this datasheet is at the users’ own risk.  
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehen-  
sive, complete and up to date.  
Fujitsu Components Europe B.V. and afliated companies do however not accept any responsibility or liability on their behalf, nor on behalf  
of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information  
and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.  
Nor do Fujitsu Components Europe B.V. and afliated companies accept on their behalf, nor on behalf of its employees, any responsibility  
or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or tness for  
particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy,  
comprehensiveness, usefulness, availability and completeness thereof. Rev. March 02, 2011  
8
Mouser Electronics  
Authorized Distributor  
Click to View Pricing, Inventory, Delivery & Lifecycle Information:  
Fujitsu:  
VFP-24LU VFP-12MU VFP-24MU VFB-6MU VFP-60LU VFP-60MU VFP-60HU VFB-3MU VF-12HU VF-12LU  
VFB-3HU VFB-3LU VF-12MU VF-3HU VFD-5MU VFD-18MU VF-3LU VFD-6MU VFB-18HU VFB-60MU VFP-  
5MU VFP-5LU VF-48MU VFB-48MU VFB-48LU VFB-48HU VFB-5MU VFB-5LU VFB-9MU VF-18LU VFB-9LU  
VFB-9HU VF-18MU VF-18HU VFB-5HU VF-9HU VF-9MU VFD-3LU VFD-24LU VFD-24HU VFD-3HU VF-24MU  
VF-60MU VFD-3MU VF-48HU VF-48LU VFB-12MU VFB-12LU VFB-12HU VF-5HU VF-5MU VF-5LU VFD-  
60LU VFD-60HU VFP-12LU VFD-9LU VFD-9HU VFD-9MU VFB-60LU VFB-60HU VFP-18HU VFP-18LU VFB-  
24MU VFD-48HU VFB-24HU VFB-24LU VFD-48LU VFD-24MU VFP-6HU VFP-6LU VFP-6MU VF-24HU VF-  
24LU VFP-12HU VFP-48MU VFP-48LU VFP-48HU VFD-5LU VFD-18LU VFD-5HU VFD-18HU VF-3MU VFP-  
18MU VF-6MU VFD-6LU VFD-6HU VFD-60MU VF-60HU VF-60LU VFB-6LU VFB-6HU VFP-5HU VFP-3LU  
VFP-3HU VFP-3MU VFP-9HU VFP-9LU VFP-9MU VFD-48MU VFD-12LU  

相关型号:

VF-60LU

1 POLE - 20/25/30A - Heavy power control
FUJITSU

VF-60MU

Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.02A (COIL), 60VDC (COIL), 1200mW (COIL), PANEL MOUNT, ROHS COMPLIANT
FUJITSU

VF-699254-5-X

Label format - Old format order code cross reference
TE

VF-6HU

POWER RELAY 1 POLE-20, 25, 30 A (HEAVY POWER CONTROL)
FUJITSU

VF-6LU

POWER RELAY 1 POLE-20, 25, 30 A (HEAVY POWER CONTROL)
FUJITSU

VF-6MU

POWER RELAY 1 POLE-20, 25, 30 A (HEAVY POWER CONTROL)
FUJITSU

VF-762254-5-X

Label format - Old format order code cross reference
TE

VF-762508-2.5-X

Label format - Old format order code cross reference
TE

VF-9LU

Power/Signal Relay, POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.133A (COIL), 9VDC (COIL), 1200mW (COIL), PANEL MOUNT, ROHS COMPLIANT
FUJITSU

VF-9MU

Power/Signal Relay, 1 Form A, SPST, Momentary, 0.133A (Coil), 9VDC (Coil), 1200mW (Coil), DC Input, Random, AC Output, Panel Mount, ROHS COMPLIANT
FUJITSU

VF-D250-D1224A

up to 250 W continuous power w/ 16 CFM forced air
CUI

VF-D250-D1224A-CF

over load, over voltage, over temperature, and short circuit protections
CUI