L6622-01 [HAMAMATSU]
130 KV MICROFOCUS X-RAY SOURCE; 130千伏微焦点X射线源型号: | L6622-01 |
厂家: | HAMAMATSU CORPORATION |
描述: | 130 KV MICROFOCUS X-RAY SOURCE |
文件: | 总4页 (文件大小:619K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
130 kV
LM6IC6R2OF2O-C0U1S X-RAY SOURCE
NEW
FEATURES
APPLICATIONS
ꢀ X-ray Non-destructive Test
ꢀ Focal Spot Size: 10 µm
Providing 10 µm focal spot size, for the sealed-off type
X-ray source with built-in power supply. It gives a clear
clairvoyance image despite higher magnification ratio.
• Printed Circuits
• Electronic Components
• Semiconductor Devices
• Soldered Parts
• Combinated Materials
• New Materials
• Ceramics
• Rubbers
• Plastics
ꢀ Easy Handling
• Die casting
Convenient handling (with no high voltage wiring) since the
air cooled X-ray source and the high voltage power supply
are in one package.
ꢀ Multilayer Printed Circuit Board
X-ray Inspection•Drilling Instrument
ꢀ Industrial On-line Process Control
and Measurement
ꢀ Continuous Operation
It allows continuous maximum output, 130 kV and 300 µA,
operation (Large focal spot operation).
ꢀ Built-in External Control Function
It is automatically operable from external control since it has
a built-in RS-232C interface.
ꢀ Industrial X-ray Computer
Tomography System
SPECIFICATIONS
ꢀGENERAL
Parameter
Value/Description
Unit
Target Voltage
20 to 130
kV
µA
µA
40 to 100 kV
100 to 130 kV
0 to 250b
Small Focal Spot
Target Currenta
0 to 100
Large Focal Spot
0 to 300
µA
Small Focal Spot
Large Focal Spot
13
39
W
W
Maximum Output Power
Small Focal Spot
Large Focal Spot
10
40
µm
µm
Focal Spot Size
Beam Angle
43
degree
Minimum Distance Focus / Object
Environmental X-ray Dose Leakage
Operation
18
3
mm
mSv/h Max.
—
Continuous
NOTE: a Refer to Figure 1
b
In the range of output (= Tube voltage × Tube current) less than 10 W
ꢁX-RAY TUBE UNIT
ꢁX-RAY CONTROL UNIT
Parameter
X-ray Tube
Description
Sealed Type
Parameter
Description
Target Voltage/Current
Pre-set, Auto Warm-up
Safety Interlock
Function
Cooling Method
Window Material
Target Material
Cathode Material
Window Position
High Voltage
Power Supply
Operation / Storage
Temperature
Forced Air Cooling
Beryllium (200 µmt)
Tungsten
Dispenser Cathode
End-window
Protection
External Control
Operation / Storage
Temperature
Operation / Storage
Humidity
RS-232C
0 to +40 °C
Built-in Type
85 % RH Max.a
Power Consumption
Inter Voltage
200 W Max.
24 V dc
+10 to +40 °C / 0 to +50 °C
Operation / Storage
Humidity
Weight
Designed for both bench-top
and rack mounting
Approx. 6 kg
85 % RH Max.a
Approx. 12.5 kg
Installation Method
Weight
NOTE: a Without moisture condensation.
Figure 1: X-ray Tube Operational Range
TLSOB0046EB
350
300
LARGE FOCAL SPOT
250
200
150
100
SMALL FOCAL SPOT
50
0
0
20
40
60
80
100
120
140
TARGET VOLTAGE (kV)
130 KV MICROFOCUS X-RAY SOURCE
DIMENSIONAL OUTLINE (Unit: mm)
X-RAY TUBE UNIT
X-RAY UNIT INSTALLATION SCREW HOLE
4-M6 D8
55
1
20
1
X-RAY WINDOW
18
AIR VENT
BEAM ANGLE
FOCAL SPOT
CONTROL CABLE RECEPTACLE
90.0 0.5
110
11
1
2
100 MIN.
300
2
X-RAY UNIT INSTALLATION SCREW HOLES
4-M6 D8
15
175.0 0.5
TLSOA0046EB
X-RAY CONTROL UNIT
100 MIN.
FRONT VIEW
SIDE VIEW
X-RAY 130 CONTROL UNIT
VOLTAGE
CURRENT
OVER
ERROR
X-RAY MODE
OFF
X-RAY
kV
µA
STANDBY
AGING
CONTROL
CONTROL
SPOT SIZE
LARGE
OPERATE
ON
PRE-SET
PRE-SET
ON
OFF
REMOTE
INTER LOCK
9
426
482
2
2
9
40
300
2
30
INTERCONNECTION CABLE CONNECTOR
DIA 33 mm MAX.
REAR VIEW
T
6.3A 250V
X-RAY REMOTE
OUTPUT
AGING SIGNAL
INTER LOCK1
INTER LOCK2
24V
RS-232
IDENTIFICATION PLATE
LABEL
TLSOA0047ED
130 KV MICROFOCUS X-RAY SOURCE
RELATED PRODUCTS
X-RAY IMAGE INTENSIFIER CAMERA UNIT
C7716, C7716-10
The C7716 series X-ray image intensifier (I. I.) camera unit now offers greatly
improved X-ray detection efficiency even at low energy levels. This improve-
ment stems primarily from a built-in X-ray image intensifier having an extreme-
ly thin aluminum input window. Its thickness is only 0.3mm or less, virtually at
the limit of present technology providing excellent X-ray transmit-tance and
low scattering.
The results are sharp, clear, high-quality images taken at low energy X-ray lev-
els down to several keV which penetrate plastic (PET) materials.
X-RAY IMAGE INTENSIFIER CAMERA UNIT
C7876, C7876-10
The C7876 is an X-ray image intensifier camera unit ideal for non-destructive
inspection of light-element materials and radiation imaging at low-energy
X-ray levels.
The C7876 remarkably improves X-ray transmittance at low-energy X-ray lev-
els by using a beryllium window instead of the aluminum window currently
used for most X-ray image intensifiers.
The result is a sharp and clear, high-contrast image taken in real time even at
low energy X-ray levels down to a few keV.
!
PRE-CAUTION TO USE
1. X-ray emitted from this device is harmful for human body. And it should be necessary for the operator to protect himself/herself
from it.
2. During an operation, the X-ray tube unit should be installed in the X-ray shielded cabinet in order to avoid any X-ray leakage.
Also the safety interlock system in X-ray control unit should be always used in order to avoid any misoperation.
# WARRANTY PERIOD
This device is guaranteed for one and a half years from data of purchase or 5000 hours of operation, whichever comes first.
The warranty extends only to replacement of the products. The warranty does not cover damage due to misuse or natural calamity.
*
This product(s) conforms to the EMC directive (89/336/EEC) of the European Union.
* To meet FDA standards, the Interlock-1 circuit incorporates a relay that shuts off the X-ray generation power supply circuit if the circuit is open.
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2001 Hamamatsu Photonics K.K
HOMEPAGE URL http://www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Center
314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se
TLSO1024E04
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it
JAN. 2002 IP
Printed in Japan (500)
相关型号:
©2020 ICPDF网 联系我们和版权申明