HMC455LP3_06 [HITTITE]
InGaP HBT Watt High IP3 AMPLIFIER, 1.7 - 2.5 GHz; 的InGaP HBT 瓦高IP3放大器, 1.7 - 2.5 GHz的型号: | HMC455LP3_06 |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | InGaP HBT Watt High IP3 AMPLIFIER, 1.7 - 2.5 GHz |
文件: | 总8页 (文件大小:384K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC455LP3 / 455LP3E
v02.0605
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
5
Typical Applications
Features
This amplifier is ideal for high linearity applications:
• Multi-Carrier Systems
• GSM, GPRS & EDGE
• CDMA & WCDMA
Output IP3: +42 dBm
Gain: 13 dB
56% PAE @ +28 dBm Pout
+19 dBm W-CDMA Channel Power @ -45 dBc ACP
3x3 mm QFN SMT Package
• PHS
Functional Diagram
General Description
The HMC455LP3 & HMC455LP3E are high output
IP3 GaAs InGaP Heterojunction Bipolar Transistor
(HBT) ½ watt MMIC amplifiers operating between
1.7 and 2.5 GHz. Utilizing a minimum number of
external components the amplifier provides 13 dB of
gain and +28 dBm of saturated power at 56% PAE
from a single +5 Vdc supply voltage. The high output
IP3 of +42 dBm coupled with the low VSWR of 1.4:1
make the HMC455LP3 & HMC455LP3E ideal driver
amplifiers for PCS/3G wireless infrastructures. A low
cost, leadless 3x3 mm QFN surface mount package
(LP3) houses the linear amplifier. The LP3 provides
an exposed base for excellent RF and thermal
performance.
Electrical Specifications, TA = +25° C, Vs= +5V
Parameter
Min.
Typ.
1.7 - 1.9
13.5
0.012
13
Max.
Min.
10.5
Typ.
1.9 - 2.2
13
Max.
0.02
Min.
9
Typ.
2.2 - 2.5
11.5
0.012
10
Max.
0.02
Units
GHz
dB
Frequency Range
Gain
11.5
Gain Variation Over Temperature
Input Return Loss
0.02
0.012
15
dB / °C
dB
Output Return Loss
10
18
15
dB
Output Power for 1dB Compression (P1dB)
Saturated Output Power (Psat)
Output Third Order Intercept (IP3)
Noise Figure
24
37
27
24.5
39
27.5
28
23
37
26
dBm
dBm
dBm
dB
28.5
40
27
42
40
7
6
6
Supply Current (Icq)
150
150
150
mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 352
HMC455LP3 / 455LP3E
v02.0605
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
5
Broadband Gain & Return Loss
Gain vs. Temperature
15
10
5
20
19
18
17
16
15
14
13
12
11
10
S21
S11
S22
0
-5
-10
-15
-20
-25
9
+25C
+85C
-40C
8
7
6
5
1
1.5
2
2.5
3
1.5 1.6 1.7 1.8 1.9
2
2.1 2.2 2.3 2.4 2.5
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss vs. Temperature
Output Return Loss vs. Temperature
0
0
+25C
+85C
-40C
+25C
+85C
-40C
-5
-10
-15
-20
-25
-30
-5
-10
-15
-20
-25
1.5 1.6 1.7 1.8 1.9
2
2.1 2.2 2.3 2.4 2.5
1.5 1.6 1.7 1.8 1.9
2
2.1 2.2 2.3 2.4 2.5
FREQUENCY (GHz)
FREQUENCY (GHz)
P1dB vs. Temperature
Psat vs. Temperature
30
29
28
27
26
25
24
23
22
21
20
30
29
28
27
26
25
24
23
22
21
20
+25C
+85C
-40C
+25C
+85C
-40C
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
2.5
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
2.5
FREQUENCY (GHz)
FREQUENCY (GHz)
Data shown is tuned for 1.85 - 2.2 GHz, contact HMC
Applications for recommended 1.7 - 1.85 GHz & 2.2 - 2.5 GHz tuning circuits.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 353
HMC455LP3 / 455LP3E
v02.0605
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
5
Output IP3 vs. Temperature
Noise Figure vs. Temperature
44
43
42
41
40
39
38
37
10
9
8
7
6
5
+25C
+85C
-40C
36
35
34
4
+25C
3
2
1
0
+85C
-40C
33
32
31
30
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
2.5
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
2.5
FREQUENCY (GHz)
FREQUENCY (GHz)
Power Compression @ 1.95 GHz
Power Compression @ 2.15 GHz
60
56
52
48
44
60
56
52
48
44
40
40
Pout
Gain
PAE
Pout
Gain
PAE
36
32
28
24
20
16
12
8
36
32
28
24
20
16
12
8
4
4
0
0
-10 -8 -6 -4 -2
0
2
4
6
8
10 12 14 16 18 20
-10 -8 -6 -4 -2
0
2
4
6
8
10 12 14 16 18 20
INPUT POWER (dBm)
INPUT POWER (dBm)
Gain, Power & IP3 vs.
Supply Voltage @ 1.95 GHz
Reverse Isolation vs. Temperature
44
40
36
32
28
0
-5
+25C
+85C
-40C
-10
-15
-20
-25
-30
24
Gain
P1dB
20
16
Psat
OIP3
12
8
4.5
4.7
5
5.2
5.5
1.5 1.6 1.7 1.8 1.9
2
2.1 2.2 2.3 2.4 2.5
Vs (Vdc)
FREQUENCY (GHz)
Data shown is tuned for 1.85 - 2.2 GHz, contact HMC
Applications for recommended 1.7 - 1.85 GHz & 2.2 - 2.5 GHz tuning circuits.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 354
HMC455LP3 / 455LP3E
v02.0605
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
ACPR vs. Supply Voltage @ 1.96 GHz
CDMA 2000, 9 Channels Forward
ACPR vs. Supply Voltage @ 2.14 GHz
W-CDMA, 64 DPCH
5
-40
-30
-35
-45
-50
-55
-60
-65
CDMA2000 Rev. 8
Frequency: 1.96 GHz
Integration BW: 1.228 MHz
Forward Link, SR1, 9 Channels
WCDMA
Frequency : 2.14 GHz
Integration BW: 3.84 MHz
64 DPCH
-40
-45
-50
-55
-60
-65
4.5V
4.5V
5V
5V
5.5V
5.5V
Source ACPR
17 19
Source ACPR
5
7
9
11
13
15
21
5
7
9
11
13
15
17
19
21
Channel Output Power (dBm)
Channel Output Power (dBm)
Data shown is tuned for 1.85 - 2.2 GHz, contact HMC
Applications for recommended 1.7 - 1.85 GHz &
2.2 - 2.5 GHz tuning circuits.
Absolute Maximum Ratings
Collector Bias Voltage (Vcc)
+6.0 Vdc
RF Input Power (RFin)(Vs = +5.0 Vdc) +25 dBm
Junction Temperature
150 °C
1.04 W
Continuous Pdiss (T = 85 °C)
(derate 16 mW/°C above 85 °C)
Thermal Resistance
(junction to ground paddle)
63 °C/W
Storage Temperature
Operating Temperature
-65 to +150 °C
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 355
HMC455LP3 / 455LP3E
v02.0605
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
5
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
455
XXXX
HMC455LP3
Low Stress Injection Molded Plastic
Sn/Pb Solder
455
XXXX
MSL1 [2]
HMC455LP3E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 356
HMC455LP3 / 455LP3E
v02.0605
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
5
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1, 2, 4 - 9,
11 - 16
N/C
This pin may be connected to RF ground.
This pin is AC coupled.
An off chip series matching capacitor is required.
3
RFIN
10
RFOUT
GND
RF output and DC Bias for the output stage.
Package bottom must be connected to RF/DC ground.
Application Circuit
Recommended Component Values
TL1
TL2
50 Ohm
0.18”
19°
TL3
50 Ohm
0.13”
TL4
50 Ohm
0.04”
4°
L1
C1
8.2 nH
2.2 μF
3.0 pF
0.9 pF
100 pF
Impedance
50 Ohm
0.33”
34°
Physical Length
Electrical Length
C2, C3
C4
13.5°
PCB Material: 10 mil Rogers 4350, Er = 3.48
C5
Data shown is tuned for 1.85 - 2.2 GHz, contact HMC
Applications for recommended 1.7 - 1.85 GHz & 2.2 - 2.5 GHz tuning circuits.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 357
HMC455LP3 / 455LP3E
v02.0605
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
5
Evaluation PCB
J3
Pin Number
1, 2, 3
Description
GND
Vs
4, 5, 6
List of Materials for Evaluation PCB 106058 [1]
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar to
that shown. A sufficient number of VIA holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
Item
J1 - J2
J3
Description
PCB Mount SMA Connector
2 mm DC Header
C1
2.2 μF Capacitor, Tantalum
3.0 pF Capacitor, 0402 Pkg.
0.9 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
8.2 nH Inductor, 0402 Pkg.
C2, C3
C4
C5
L1
HMC455LP3 / HMC455LP3E
Power Amplifier
U1
[2]
PCB
106492 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evalution PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
Data shown is tuned for 1.85 - 2.2 GHz, contact HMC
Applications for recommended 1.7 - 1.85 GHz & 2.2 - 2.5 GHz tuning circuits.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 358
HMC455LP3 / 455LP3E
v02.0605
InGaP HBT ½ Watt High IP3
AMPLIFIER, 1.7 - 2.5 GHz
5
Notes:
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 359
相关型号:
©2020 ICPDF网 联系我们和版权申明