HMC626LP5_09 [HITTITE]

0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, DC - 1 GHz; 0.5分贝LSB的GaAs MMIC 6位数字可变增益放大器, DC - 1 GHz的
HMC626LP5_09
型号: HMC626LP5_09
厂家: HITTITE MICROWAVE CORPORATION    HITTITE MICROWAVE CORPORATION
描述:

0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, DC - 1 GHz
0.5分贝LSB的GaAs MMIC 6位数字可变增益放大器, DC - 1 GHz的

放大器
文件: 总8页 (文件大小:385K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
HMC626LP5 / 626LP5E  
v06.0709  
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL  
VARIABLE GAIN AMPLIFIER, DC - 1 GHz  
Typical Applications  
The HMC626LP5(E) is ideal for:  
• IF & RF Applications  
Features  
+8.5 dB to +40 dB Gain Control in 0.5 dB Steps  
High Output IP3: +36 dBm  
0.25 dB Typical Gain Step Error  
• Cellular/3G Infrastructure  
• WiBro / WiMAX / 4G  
Single +5V Supply  
32 Lead 5x5mm SMT Package: 25mm2  
• Microwave Radio & VSAT  
• Test Equipment and Sensors  
Functional Diagram  
General Description  
The HMC626LP5(E) is a digitally controlled variable  
gain amplifier which operates from DC to 1 GHz, and  
can be programmed to provide anywhere from 8.5 dB,  
to 40 dB of gain, in 0.5 dB steps. The HMC626LP5(E)  
delivers noise figure of 2.8 dB in its maximum gain  
state, with output IP3 of up to +36 dBm in any state.  
This single positive control line per bit digital VGA  
incorporates off chip AC ground capacitors for near  
DC operation, making it suitable for a wide variety of  
RF and IF applications. The HMC626LP5(E) is housed  
in a RoHS compliant 5x5 mm QFN leadless package,  
and requires no external matching components. A  
serial control version of this product is available as the  
HMC681LP5(E).  
13  
Electrical Specifications, TA = +25° C, Vdd = Vs= +5V, Vctl= 0/ +5V  
Parameter  
Frequency  
Min.  
Typ.  
Max.  
Units  
DC - 0.5 GHz  
0.5 - 1.0 GHz  
37  
30  
42.5  
35.0  
dB  
dB  
Gain (Maximum Gain State)  
Gain Control Range  
Input Return Loss  
Output Return Loss  
31.5  
20  
dB  
dB  
dB  
15  
Gain Setting Accuracy: (Referenced to Maximum Gain State)  
All Gain States  
0.5 - 1.0 GHz  
DC - 1.0 GHz  
(0.15 + 3% of Relative Gain Setting) Max.  
20  
dB  
Output Power for 1 dB Compression  
dBm  
Output Third Order Intercept Point  
(Two-Tone Output Power= 5 dBm Each Tone)  
DC - 1.0 GHz  
DC - 1.0 GHz  
36  
dBm  
dB  
Noise Figure  
2.8  
Switching Characteristics  
DC - 1.0 GHz  
DC - 1.0 GHz  
130  
140  
tRISE, tFALL (10/90% RF)  
tON, tOFF (50% CTL to 10/90% RF)  
ns  
ns  
Total Supply Current  
176  
225  
mA  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
13 - 16  
HMC626LP5 / 626LP5E  
v06.0709  
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL  
VARIABLE GAIN AMPLIFIER, DC - 1 GHz  
Relative Gain Setting  
(Referenced to Maximum Gain State)  
Gain vs. Frequency[1]  
(Only Major States are Shown)  
0
50  
[1]  
45  
-5  
-10  
-15  
-20  
-25  
-30  
-35  
40  
35  
30  
[2]  
25  
20  
15  
10  
5
+25 C  
+85 C  
-40 C  
0
0
0.3  
0.5  
0.8  
1
1.3  
1.3  
1.3  
1.5  
1.5  
1.5  
0
0.3  
0.5  
0.8  
1
1.3  
1.3  
1.3  
1.5  
1.5  
1.5  
FREQUENCY (GHz)  
FREQUENCY (GHz)  
13  
Input Return Loss[1]  
(Only Major States are Shown)  
Output Return Loss[1]  
(Only Major States are Shown)  
0
-5  
0
-5  
-10  
-15  
-20  
-25  
-30  
-35  
-40  
-10  
-15  
-20  
-25  
-30  
-35  
-40  
0
0.3  
0.5  
0.8  
1
0
0.3  
0.5  
0.8  
1
FREQUENCY (GHz)  
FREQUENCY (GHz)  
Output Return Loss[2]  
(Only Major States are Shown)  
Input Return Loss[2]  
(Only Major States are Shown)  
0
-5  
0
-5  
-10  
-15  
-20  
-25  
-30  
-35  
-40  
-10  
-15  
-20  
-25  
-30  
-35  
-40  
0
0.3  
0.5  
0.8  
1
0
0.3  
0.5  
0.8  
1
FREQUENCY (GHz)  
FREQUENCY (GHz)  
[1] Tested with broadband bias tee on output J2, C7, C8 = 10,000pF ; L1 = 680nH  
[2] Data taken on eval board as described in data sheet  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
13 - 17  
HMC626LP5 / 626LP5E  
v06.0709  
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL  
VARIABLE GAIN AMPLIFIER, DC - 1 GHz  
Bit Error vs. Frequency[2]  
(Only Major States are Shown)  
Bit Error vs. Relative Gain Setting[2]  
2
1.5  
1
2
1.5  
1
0.5  
0
0.5  
0
-0.5  
-1  
-0.5  
-1  
-1.5  
-2  
-1.5  
-2  
0
0.3  
0.5  
0.8  
1
1.3  
1.5  
0
4
8
12  
16  
20  
24  
28  
32  
RELATIVE GAIN SETTING (dB)  
FREQUENCY (GHz)  
13  
Relative Phase vs. Frequency[2]  
(Only Major States are Shown)  
Step Error vs. Frequency[2]  
(Only Major States are Shown)  
60  
1
0.8  
0.6  
0.4  
0.2  
0
31.5 dB  
16 dB  
40  
8 dB  
20  
0
-0.2  
-0.4  
-0.6  
-0.8  
-1  
0.5 - 4 dB  
-20  
-40  
0
0.3  
0.5  
0.8  
1
1.3  
1.5  
0
0.3  
0.5  
0.8  
1
1.3  
1.5  
FREQUENCY (GHz)  
FREQUENCY (GHz)  
[1] Tested with broadband bias tee on output J2, C7, C8 = 10,000pF ; L1 = 680nH  
[2] Data taken on eval board as described in data sheet  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
13 - 18  
HMC626LP5 / 626LP5E  
v06.0709  
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL  
VARIABLE GAIN AMPLIFIER, DC - 1 GHz  
Truth Table  
Bias Voltage & Current  
Control Voltage Input  
Relative  
Vdd (V)  
Idd (Typ.) (mA)  
Gain  
Setting  
V1  
16 dB  
V2  
8dB  
V3  
4 dB  
V4  
2 dB  
V5  
1 dB  
V6  
0.5 dB  
+4.5  
4.7  
5.0  
+5.0  
Reference  
0 dB  
+5.5  
5.3  
High  
High  
High  
High  
High  
High  
Vs (V)  
+5.0  
Is (mA)  
176  
High  
High  
High  
High  
High  
Low  
High  
High  
High  
High  
Low  
High  
High  
High  
Low  
High  
High  
Low  
High  
Low  
Low  
High  
High  
High  
High  
High  
Low  
-0.5 dB  
-1 dB  
High  
High  
High  
High  
Low  
-2 dB  
Control Voltage Table  
High  
High  
High  
Low  
-4 dB  
High  
High  
Low  
-8 dB  
State  
Vdd = +3V  
Vdd = +5V  
High  
Low  
-16 dB  
-31.5 dB  
Low  
0 to 0.5V @ <1 μA  
2 to 3V @ <1 μA  
0 to 0.8V @ <1 μA  
2 to 5V @ <1 μA  
Low  
High  
Any combination of the above states will provide a relative gain  
setting approximately equal to the sum of the bits selected.  
13  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
13 - 19  
HMC626LP5 / 626LP5E  
v06.0709  
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL  
VARIABLE GAIN AMPLIFIER, DC - 1 GHz  
Absolute Maximum Ratings  
RF Input Power [1] (At Max Gain  
Setting)  
-10.5 dBm (T = +85 °C)  
ELECTROSTATIC SENSITIVE DEVICE  
OBSERVE HANDLING PRECAUTIONS  
Bias Voltage (Vdd)  
+5.5 Vdc  
5.5 Vdc  
150 °C  
Collector Bias Voltage (Vcc)  
Channel/Junction Temperature  
Continuous Pdiss (T = 85 °C)  
(derate 19.8 mW/°C above 85 °C) [1]  
1.29 W  
Thermal Resistance  
Storage Temperature  
Operating Temperature  
50.8 °C/W  
-65 to +150 °C  
-40 to +85 °C  
[1] The Max RF Input Power Rating will increase by 0.5 dB for  
every 0.5 dB reduction in gain to a maximum RF Input Power of  
10 dBm.  
13  
Outline Drawing  
NOTES:  
1. LEADFRAME MATERIAL: COPPER ALLOY  
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]  
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.  
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.  
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.  
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.  
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE  
SOLDERED TO PCB RF GROUND.  
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED  
LAND PATTERN.  
Package Information  
Part Number  
Package Body Material  
Lead Finish  
MSL Rating  
MSL1 [1]  
Package Marking [3]  
H626  
XXXX  
HMC626LP5  
Low Stress Injection Molded Plastic  
Sn/Pb Solder  
H626  
XXXX  
MSL1 [2]  
HMC626LP5E  
RoHS-compliant Low Stress Injection Molded Plastic  
100% matte Sn  
[1] Max peak reflow temperature of 235 °C  
[2] Max peak reflow temperature of 260 °C  
[3] 4-Digit lot number XXXX  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
13 - 20  
HMC626LP5 / 626LP5E  
v06.0709  
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL  
VARIABLE GAIN AMPLIFIER, DC - 1 GHz  
Pin Descriptions  
Pin Number  
Function  
N/C  
Description  
Interface Schematic  
1, 5, 9, 14, 16, 23,  
24, 31  
These pins may be connected to RF/DC ground.  
Performance will not be affected.  
This pin is DC coupled. An off chip DC blocking capacitor is  
required.  
2, 20  
RFin1, RFin2  
RF output and DC bias (Vcc) for the output stage of the  
amplifiers. Amplifier bias provided via external bias tee as  
shown in application circuit.  
4, 22  
3, 7, 18, 21  
6, 19  
RFout1, RFout2  
These pins and package bottom  
must be connected to RF/DC ground.  
13  
GND  
These pins are DC coupled and matched to 50 Ohms.  
Blocking capacitors are required. Select value based  
on lowest frequency of operation.  
ATTin,  
ATTout  
8, 10,  
11, 12,  
13, 15,  
17  
ACG1, ACG2,  
ACG3, ACG4,  
ACG5, ACG6,  
ACG7  
External capacitors to ground is required. Select value for  
lowest frequency of operation. Place capacitor as close to  
pins as possible.  
See truth table, control voltage  
table and timing diagram.  
25 - 30  
V1 - V6  
32  
Vdd  
Supply voltage  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
13 - 21  
HMC626LP5 / 626LP5E  
v06.0709  
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL  
VARIABLE GAIN AMPLIFIER, DC - 1 GHz  
Application Circuit  
13  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
13 - 22  
HMC626LP5 / 626LP5E  
v06.0709  
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL  
VARIABLE GAIN AMPLIFIER, DC - 1 GHz  
Evaluation PCB  
13  
List of Materials for Evaluation PCB 117355 [1]  
The circuit board used in the final application should  
use RF circuit design techniques. Signal lines  
should have 50 ohm impedance while the package  
ground leads and exposed paddle should be con-  
nected directly to the ground plane similar to that  
shown. A sufficient number of via holes should be  
used to connect the top and bottom ground planes.  
The evaluation circuit board shown is available from  
Hittite upon request.  
Item  
Description  
J1 - J2  
J3  
PCB Mount SMA Connector  
12 Pin DC Connector  
J4 - J9  
C1, C2, C9, C10  
C3, C4  
C5 - C8  
C11 - C13  
C14, C15  
R1, R2  
L1, L2  
DC Pin  
820 pF Capacitor, 0402 Pkg.  
100 pF Capacitor, 0402 Pkg.  
330 pF Capacitor, 0402 Pkg.  
1000 pF Capacitor, 0402 Pkg.  
2.2 μF Capacitor, CASE A Pkg.  
1.8 Ohm Resistor, 0603 Pkg.  
110 nH Inductor, 0603 Pkg.  
HMC626LP5(E) Variable Gain Amplifier  
118934 Evaluation PCB  
U1  
[2]  
PCB  
[1] Reference this number when ordering complete evaluation PCB  
[2] Circuit Board Material: Arlon 25FR  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
13 - 23  

相关型号:

HMC627ALP5E

0.5 dB LSB GaAs MMIC 6-Bit Digital Variable Gain Amplifier SMT, 50 MHz - 1 GHz
ADI

HMC627ALP5E

RF and Baseband Circuit, PQCC32, 5 X 5 MM, ROHS COMPLIANT, PLASTIC, SMT-32
HITTITE

HMC627LP5

0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, DC - 1 GHz
HITTITE

HMC627LP5E

0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, DC - 1 GHz
HITTITE

HMC627LP5ETR

Wide Band Low Power Amplifier,
HITTITE

HMC627LP5TR

Wide Band Low Power Amplifier,
HITTITE

HMC627LP5_10

0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, 50 MHz - 1 GHz
HITTITE

HMC628LP4

BiCMOS MMIC 5-Bit DIGITAL VARIABLE GAIN AMPLIFIER, 50 - 800 MHz
HITTITE

HMC628LP4E

BiCMOS MMIC 5-Bit DIGITAL VARIABLE GAIN AMPLIFIER, 50 - 800 MHz
HITTITE

HMC628LP4ERTR

HMC628LP4ERTR
ADI

HMC628LP4ETR

Wide Band Low Power Amplifier,
HITTITE

HMC628LP4RTR

HMC628LP4RTR
ADI