HMC626LP5 [HITTITE]
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, DC - 1 GHz; 0.5分贝LSB的GaAs MMIC 6位数字可变增益放大器, DC - 1 GHz的型号: | HMC626LP5 |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, DC - 1 GHz |
文件: | 总8页 (文件大小:380K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC626LP5 / 626LP5E
v02.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Typical Applications
The HMC626LP5(E) is ideal for:
• IF & RF Applications
Features
+8.5 dB to +40 dB Gain Control in 0.5 dB Steps
High Output IP3: +36 dBm
0.25 dB Typical Gain Step Error
• Cellular/3G Infrastructure
• WiBro / WiMAX / 4G
Single +5V Supply
32 Lead 5x5mm SMT Package: 25mm2
• Microwave Radio & VSAT
• Test Equipment and Sensors
Functional Diagram
General Description
The HMC626LP5(E) is a digitally controlled variable
gain amplifier which operates from DC to 1 GHz, and
can be programmed to provide anywhere from 8.5 dB,
to 40 dB of gain, in 0.5 dB steps. The HMC626LP5(E)
delivers noise figure of 4 dB in its maximum gain state,
with output IP3 of up to +36 dBm in any state. This
single positive control line per bit digital attenuator
incorporates off chip AC ground capacitors for near
DC operation, making it suitable for a wide variety of
RF and IF applications. The HMC626LP5(E) is housed
in a RoHS compliant 5x5 mm QFN leadless package,
and requires no external matching components.
14
Electrical Specifications, TA = +25° C, Vdd = Vs= +5V, Vctl= 0/ +5V
Parameter
Frequency
Min.
Typ.
Max.
Units
DC - 0.5 GHz
0.5 - 1.0 GHz
37
30
42.5
35.0
dB
dB
Gain (Maximum Gain State)
Gain Control Range
Input Return Loss
Output Return Loss
31.5
20
dB
dB
dB
15
Attenuation Accuracy: (Referenced to Maximum Gain State)
All Attenuation States
0.5 - 1.0 GHz
DC - 1.0 GHz
(0.15 + 3% of Atten. Setting) Max.
20
dB
Output Power for 1 dB Compression
dBm
Output Third Order Intercept Point
(Two-Tone Input Power= 0 dBm Each Tone)
DC - 1.0 GHz
DC - 1.0 GHz
36
4
dBm
dB
Noise Figure
Switching Characteristics
DC - 1.0 GHz
DC - 1.0 GHz
130
140
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
ns
ns
Supply Current
176
mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 12
HMC626LP5 / 626LP5E
v02.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Normalized Attenuation
(Only Major States are Shown)
Gain vs. Frequency[1]
50
[1]
45
0
-5
40
35
-10
-15
-20
-25
-30
-35
30
[2]
25
20
15
10
5
+25 C
+85 C
-40 C
0
0
0.3
0.5
0.8
1
1.3
1.3
1.3
1.5
1.5
1.5
0
0.3
0.5
0.8
1
1.3
1.3
1.3
1.5
1.5
1.5
FREQUENCY (GHz)
FREQUENCY (GHz)
14
Input Return Loss[1]
(Only Major States are Shown)
Output Return Loss[1]
(Only Major States are Shown)
0
-5
0
-5
-10
-15
-20
-25
-30
-35
-40
-10
-15
-20
-25
-30
-35
-40
0
0.3
0.5
0.8
1
0
0.3
0.5
0.8
1
FREQUENCY (GHz)
FREQUENCY (GHz)
Output Return Loss[2]
(Only Major States are Shown)
Input Return Loss[2]
(Only Major States are Shown)
0
-5
0
-5
-10
-15
-20
-25
-30
-35
-40
-10
-15
-20
-25
-30
-35
-40
0
0.3
0.5
0.8
1
0
0.3
0.5
0.8
1
FREQUENCY (GHz)
FREQUENCY (GHz)
[1] Tested with broadband bias tee on output J2, C7, C8 = 10,000pF ; L1 = 680nH
[2] Data taken on eval board as described in data sheet
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 13
HMC626LP5 / 626LP5E
v02.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Bit Error vs. Frequency[2]
(Only Major States are Shown)
Bit Error vs. Attenuation State[2]
2
1.5
1
2
1.5
1
0.5
0
0.5
0
-0.5
-1
-0.5
-1
-1.5
-2
-1.5
-2
0
0.3
0.5
0.8
1
1.3
1.5
0
4
8
12
16
20
24
28
32
FREQUENCY (GHz)
ATTENUATION STATE (dB)
14
Normal Relative Phase vs. Frequency[2]
(Only Major States are Shown)
Step Error vs. Frequency[2]
(Only Major States are Shown)
60
1
0.8
0.6
0.4
0.2
0
31.5 dB
16 dB
40
8 dB
20
0
-0.2
-0.4
-0.6
-0.8
-1
0.5 - 4 dB
-20
-40
0
0.3
0.5
0.8
1
1.3
1.5
0
0.3
0.5
0.8
1
1.3
1.5
FREQUENCY (GHz)
FREQUENCY (GHz)
[1] Tested with broadband bias tee on output J2, C7, C8 = 10,000pF ; L1 = 680nH
[2] Data taken on eval board as described in data sheet
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 14
HMC626LP5 / 626LP5E
v02.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Truth Table
Bias Voltage & Current
Control Voltage Input
Gain
Relative to
Maximum
Gain
Vdd (V)
Idd (Typ.) (mA)
+4.5
4.7
5.0
V6
V5
V4
V3
V2
V1
+5.0
+5.5
5.3
Reference
0 dB
High
High
High
High
High
High
Vs (V)
+5.0
Is (mA)
176
High
High
High
High
High
Low
High
High
High
High
Low
High
High
High
Low
High
High
Low
High
Low
Low
High
High
High
High
High
Low
-0.5 dB
-1 dB
High
High
High
High
Low
-2 dB
High
High
High
Low
-4 dB
High
High
Low
-8 dB
Control Voltage
High
Low
-16 dB
-31.5 dB
State
Bias Condition
Low
Low
0 to +0.8 Vdc @ -5 uA Typ.
14
Any combination of the above states will provide a reduction in
gain approximately equal to the sum of the bits selected.
High
+ 2.0 to + 5.0 Vdc @ 40 uA Typ.
Note: Vdd = +5V
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 15
HMC626LP5 / 626LP5E
v02.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Absolute Maximum Ratings
RF Input Power [1]
12.5 dBm (T = +85 °C)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Bias Voltage (Vdd)
+5.5 Vdc
Collector Bias Voltage (Vcc)
Channel/Junction Temperature
5.5 Vdc
150 °C
Continuous Pdiss (T = 85 °C)
(derate 7.7 mW/°C above 85 °C) [1]
0.593 °C/W
Thermal Resistance
Storage Temperature
Operating Temperature
[1] At max gain settling
110 °C/W
-65 to +150 °C
-40 to +85 °C
Outline Drawing
14
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H626
XXXX
HMC626LP5
Low Stress Injection Molded Plastic
Sn/Pb Solder
H626
XXXX
MSL1 [2]
HMC626LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 16
HMC626LP5 / 626LP5E
v02.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Pin Descriptions
Pin Number
Function
N/C
Description
Interface Schematic
1, 5, 9, 14, 16, 23,
24, 31
These pins may be connected to RF/DC ground.
Performance will not be affected.
This pin is DC coupled. An off chip DC blocking capacitor
is required. Amplifier bias provided via external bias tee as
shown in application circuit.
2, 20
AMPIN1, AMPIN2
AMPOUT1,
AMPOUT2
RF output and DC bias (Vcc) for
the output stage of the amplifier.
4, 22
3, 7, 18, 21
6, 19
These pins and package bottom
must be connected to RF/DC ground.
14
GND
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required. Select value based
on lowest frequency of operation.
ATTIN,
ATTOUT
8, 10,
11, 12,
13, 15,
17
ACG1, ACG2,
ACG3, ACG4,
ACG5, ACG6,
ACG7
External capacitors to ground is required. Select value for
lowest frequency of operation. Place capacitor as close to
pins as possible.
See truth table, control voltage
table and timing diagram.
25 - 30
V1 - V6
32
Vdd
Supply voltage
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 17
HMC626LP5 / 626LP5E
v02.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Application Circuit
14
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 18
HMC626LP5 / 626LP5E
v02.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Evaluation PCB
14
List of Materials for Evaluation PCB 117355 [1]
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
Item
Description
J1 - J2
J3
PCB Mount SMA Connector
12 Pin DC Connector
J4 - J9
C1, C2, C9, C10
C3, C4
C5 - C8
C11 - C13
C14, C15
R1, R2
L1, L2
DC Pin
820 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
330 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, CASEA Pkg.
1.8 Ohm Resistor, 0603 Pkg.
110 nH Inductor, 0603 Pkg.
HMC626LP5(E) Variable Gain Amplifier
117354 Evaluation PCB
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 19
相关型号:
©2020 ICPDF网 联系我们和版权申明