HRF-SW1021-TR [HONEYWELL]
SP4T, 0MHz Min, 2500MHz Max, 1 Func, 3.5dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, VQFN, LPCC-20;![HRF-SW1021-TR](http://pdffile.icpdf.com/pdf2/p00265/img/icpdf/HRF-SW1021-T_1597036_icpdf.jpg)
型号: | HRF-SW1021-TR |
厂家: | ![]() |
描述: | SP4T, 0MHz Min, 2500MHz Max, 1 Func, 3.5dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, VQFN, LPCC-20 PC 射频 微波 |
文件: | 总6页 (文件大小:153K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
HRF-SW1021
Preliminary
SP4T Absorptive RF Switch
Features
xꢀ High Isolation Of > 40 dB @ 2 GHz
xꢀ Low Insertion Loss Of 1.45dB @ 2 GHz
xꢀ DC To 2.5 GHz Operating Frequency
xꢀ Integrated CMOS Control Logic
xꢀ Integrated ESD Protection on Digital I/O
xꢀ Single Positive Supply Voltage
xꢀ Ultra Small LPCCTM Packaging
xꢀ Impedance matched to 75 Ohm systems
Product Description
HRF-SW1021 in LPCC™ Package
The Honeywell HRF-SW1021 is a high performance
single pole four throw (SP4T) absorptive RF switch that
is ideal for use in wireless basestation and handset
applications that require minimum power and minimum
insertion loss.
The HRF-SW1021 is manufactured with Honeywell's
patented Silicon On Insulator (SOI) CMOS technology,
which provides the performance of GaAs with the
economy and integration capabilities of conventional
CMOS technology.
RF Electrical Specifications @ + 25oC
Results @ Vdd=5.0 +/- 10%, Vss = 0 unless otherwise stated, Z0= 75 ohms
Parameter
Test Condition
Frequency
DC – 1.0 GHz
2.0 GHz
Minimum
Typical
1.35
Maximum
Units
dB
Insertion Loss
1.7
2.1
2.9
1.45
dB
2.5 GHz
2.60
dB
Isolation
DC – 1.0 GHz
2.0 GHz
53.5
dB
43.0
dB
2.5 GHz
40.0
dB
VSWR*
DC – 0.5 GHz
0.5 – 1.5 GHz
1.5 – 2.5 GHz
1.1:1
1.2:1
1.6:1
Ratio
Ratio
Ratio
1.8:1
1dB Compression
Input Power
Vss = Gnd
1.0 GHz
1.0 GHz
19
28
dBm
dBm
Vss = -3
Input IP3
Two-Tone Inputs Up To + 5 dBm
Vss = Gnd
2.0 GHz
2.0 GHz
31
32
10
20
10
dBm
dBm
nS
Vss = -3
Trise, Tfall*
Ton, Toff
10% To 90%
50% Cntl To 90%/10%Rf
In-Band
nS
Transients
*By design
mV
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
mysoiservices@honeywell.com
2002 1021W
Published November 2002 Page 1
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1021
Preliminary
DC Electrical Specifications @ + 25oC
Parameter
Single VDD Supply Voltage
CMOS Logic Level (0)
Minimum
3.3*
Typical
Maximum
5.5
Units
V
5.0
0
0.8
V
CMOS Logic Level (1)
VDD – 0.8
VDD
V
Input Leakage Current
10
uA
* Note, performance curves are for Vdd = +5.0 +/- 10%
Absolute Maximum Ratings1
Parameter
Absolute Maximum
Units
VDD
+6.0
V
Vin Digital Logic 0
Vin Digital Logic 1
Maximum Input Power
ESD Voltage
Vss - 0.6
Vdd + 0.6
> 35
V
V
dBm
400
V
Operating Temperature Range
Storage Temperature Range
+85
+125
Degrees C
Degrees C
(Note 1) Operation beyond any of these parameters may cause permanent damage.
Latch-Up: Unlike conventional CMOS RF switches, Honeywell's HRF-SW1021 is immune to latch-up.
ESD Protection: Although this device contains ESD protection circuitry on all digital inputs, conventional precautions should be taken
to ensure that the Absolute Maximum Ratings are not exceeded.
Package Outline Drawing
Bottom View, 20 Pin 4X4 mm LPCCTM Package
ASAT LPCC Marketing Outline Dwg. # GMJ00004
For more information see
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
mysoiservices@honeywell.com
2002 1021W
Published November 2002 Page 2
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1021
Truth Table
Preliminary
C1
C0
0
RF Output 1 RF Output 2
RFINPUT
RF Output 3
RF Output 4
0
0
1
RFINPUT
1
0
RFINPUT
1
1
RFINPUT
"0" = CMOS Low, "1” = CMOS High
Pin Configuration
Pin
Function
Pin
11
Function
1
GROUND
C1
C0
2
RFOUTPUT4
GROUND
VDD
12
3
13
GROUND
4
14
RFOUTPUT1
GROUND
GROUND
GROUND
RFINPUT
GROUND
VSS
5
DIGITAL GROUND
RFOUTPUT3
GROUND
15
16
17
18
19
20
6
7
8
GROUND
9
GROUND
10
RFOUTPUT2
Note: Bottom ground plate must be grounded for proper RF performance.
Evaluation Circuit Board Connections
Gnd
C1
C0
RF Input
VSS
VDD
Digital Gnd
HRF-SW1020-A
HRF-SW1021
RF Out4
RF Out1
Evaluation Board
Top View
RF Out3
RF Out2
“0” = CMOS Low, “1” = CMOS
Note:
HRF-SW1021 is the Z0 = 75 ohm version of the SW1020 evaluation board.
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
mysoiservices@honeywell.com
2002 1021W
Published November 2002 Page 3
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1021
Performance Curves
Insertion Loss
Preliminary
0.00
-0.50
-1.00
-1.50
-2.00
-2.50
-3.00
-3.50
-4.00
-4.50
-5.00
The Insertion Loss curve shows the worst
case loss versus frequency at Vdd = +5.0
+/- 10%, Ta = 25C, Z0 = 75 Ohms
0.00
0.50
1.00
1.50
2.00
2.50
3.00
Isolation
Isolation versus Frequency
-20.00
-30.00
-40.00
-50.00
-60.00
-70.00
-80.00
-90.00
-100.00
The Isolation curve shows the typical
isolation of an “off” state output to the
insertion path.
0.00
0.50
1.00
1.50
2.00
2.50
3.00
Frequency (GHz)
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
mysoiservices@honeywell.com
2002 1021W
Published November 2002 Page 4
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1021
Preliminary
Return Loss
Input / Output Return Losses versus Frequency
0.00
-5.00
-10.00
-15.00
-20.00
-25.00
-30.00
-35.00
-40.00
-45.00
-50.00
The return loss curve shows the input
return loss S11, the output return loss
in the insertion path S22, and the
output return loss in the isolation state
S33.
0.00
0.50
1.00
1.50
2.00
2.50
3.00
Frequency (GHz)
Evaluation Circuit Board
Honeywell's evaluation board provides an
easy to use method of evaluating the RF
performance of our switch.
power, DC and RF signals to be measuring
switch performance in less than 10
minutes.
HRF-SW1021 Evaluation Board
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
mysoiservices@honeywell.com
2002 1021W
Published November 2002 Page 5
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1021
Evaluation Circuit Board Layout Design Details
Preliminary
Item
Description
PCB
Impedance Matched Multi-Layer FR4
HRF-SW1021 RF Switch
Switch
Chip Capacitor
RF Connector
DC Pin
Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V
Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector
Mil-Max Model 800-10-064-10-001 Header Pins
Ordering Information
Ordering Number
Product
HRF-SW1021-B
Delivered In Chip Tubes
Delivered On Tape And Reel2
Engineering Evaluation Board
HRF-SW1021-TR
HRF-SW1021-E
(Note 2) Contact Honeywell for details
LPCCTM is a registered Trademark of ASAT Ltd.
Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume
any liability arising out of the application or use of any product or circuit described herein; neither does it convey any
license under its patent rights nor the rights of others.
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
mysoiservices@honeywell.com
2002 1021W
Published November 2002 Page 6
Plymouth, Minnesota 55441-4799
1-800-323-8295
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00260/img/page/HRF-SW1030-T_1570821_files/HRF-SW1030-T_1570821_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00260/img/page/HRF-SW1030-T_1570821_files/HRF-SW1030-T_1570821_2.jpg)
HRF-SW1030-B
SP6T, 0MHz Min, 2500MHz Max, 1 Func, 3.8dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, LPCC-24
HONEYWELL
![](http://pdffile.icpdf.com/pdf2/p00260/img/page/HRF-SW1030-T_1570821_files/HRF-SW1030-T_1570821_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00260/img/page/HRF-SW1030-T_1570821_files/HRF-SW1030-T_1570821_2.jpg)
HRF-SW1030-TR
SP6T, 0MHz Min, 2500MHz Max, 1 Func, 3.8dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, VQFN, LPCC-24
HONEYWELL
©2020 ICPDF网 联系我们和版权申明