首页 |元器件品牌

HRF-SW1022-B [HONEYWELL]

SP4T, 0MHz Min, 6000MHz Max, 1 Func, CMOS, 4 X 4 MM, ULTRA SMALL, QFPN-20;
HRF-SW1022-B
型号： HRF-SW1022-B
厂家： Honeywell    Honeywell
描述：

SP4T, 0MHz Min, 6000MHz Max, 1 Func, CMOS, 4 X 4 MM, ULTRA SMALL, QFPN-20

射频 微波
文件： 总6页 (文件大小：161K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
HRF-SW1022  
Advance Information  
SP4T Absorptive RF Switch  
Features  
S
S
S
S
S
S
S
S
High Isolation Of > 40 dB @ 3 GHz  
Insertion Loss Of 2.0dB @ 2 GHz  
DC To 6 GHz Operating Frequency  
Integrated CMOS Control Logic, with all OFF mode  
Integrated ESD Protection on Digital I/O  
Single Positive Supply Voltage  
Ultra Small LPCCTM Packaging  
Impedance matched for 50 Ohm systems  
Product Description  
The Honeywell HRF-SW1022 is a high performance  
single pole four throw (SP4T) absorptive RF switch that  
is ideal for use in wireless basestation and handset  
applications that require minimum power and minimum  
insertion loss.  
HRF-SW1022 in LPCC™ Package  
The HRF-SW1022 is manufactured with Honeywell's  
patented Silicon On Insulator (SOI) CMOS technology,  
which provides the performance of GaAs with the  
economy and integration capabilities of conventional  
CMOS technology.  
RF Electrical Specifications @ + 25oC  
Results @ Vdd=5.0 +/- 10%, Vss = 0 unless otherwise stated, Z0= 50 ohms  
Parameter  
Test Condition  
Frequency  
DC - 1.0 GHz  
2.0 GHz  
Minimum  
Typical  
1.5  
Maximum  
Units  
dB  
Insertion Loss  
2.0  
dB  
3.0 GHz  
3.0  
dB  
Isolation  
VSWR  
DC - 1.0 GHz  
2.0 GHz  
50  
dB  
50  
dB  
3.0 GHz  
45  
dB  
4.0 GHz  
38  
dB  
DC – 0.5 GHz  
0.5 – 2.0 GHz  
2.0 – 4.0 GHz  
1.1:1  
1.2:1  
1.3:1  
Ratio  
Ratio  
Ratio  
1.4:1  
1dB Compression  
Input IP3  
Input Power  
0.5 – 3.0 GHz  
20  
dBm  
Two-Tone Inputs Up To + 5 dBm  
0.5 – 3.0 GHz  
35  
dBm  
Trise, Tfall  
Ton, Toff  
10% To 90%  
10  
20  
10  
nS  
nS  
50% Cntl To 90%/10%Rf  
Transients  
In-Band  
mV  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
mysoiservices@honeywell.com  
2002 1022W  
Published June 2002 Page 1  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-SW1022  
Advance Information  
DC Electrical Specifications @ + 25oC  
Parameter  
Minimum  
4.5  
Typical  
Maximum  
Units  
V
Single VDD Supply Voltage  
5.0  
5.5  
0.8  
VDD  
10  
CMOS Logic Level (0)  
0
V
CMOS Logic Level (1)  
VDD – 0.8  
V
Input Leakage Current  
uA  
* Note, performance curves are for Vdd = +5.0 +/- 10%  
Absolute Maximum Ratings1  
Parameter  
Absolute Maximum  
Units  
VDD  
+6.0  
V
Vin Digital Logic 0  
Vin Digital Logic 1  
Maximum Input Power  
ESD Voltage (Human Body Model)  
Operating Temperature  
Storage Temperature  
- 0.6  
Vdd + 0.6  
> 35  
V
V
dBm  
TBD  
+85  
+125  
V
Degrees C  
Degrees C  
(Note 1) Operation beyond any of these parameters may cause permanent damage.  
Latch-Up: Unlike conventional CMOS RF switches, Honeywell's HRF-SW1022 is immune to latch-up.  
ESD Protection: Although this device contains ESD protection circuitry on all digital inputs, conventional precautions should be taken  
to ensure that the Absolute Maximum Ratings are not exceeded.  
Package Outline Drawing  
Bottom View, 20 Pin 4X4 mm LPCCTM Package  
ASAT LPCC Marketing Outline Dwg. # GMJ00004  
For more information see http://www.asat.com  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
mysoiservices@honeywell.com  
2002 1022W  
Published June 2002 Page 2  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-SW1022  
Advance Information  
Truth Table  
C0  
C1  
0
En Bar  
RF Output 1 RF Output 2  
RF Output 3  
RF Output 4  
0
0
0
0
0
1
RFINPUT  
*
*
*
0
1
*
*
*
*
RFINPUT  
*
*
1
0
*
*
*
RFINPUT  
*
1
1
*
*
RFINPUT  
*
X
X
"0" = CMOS Low, "1” = CMOS High  
“*” = 50 Ohm terminated in RF OFF path  
Preliminary Pin Configuration  
Pin  
1
Function  
Pin  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
Function  
RFOUTPUT1  
GROUND  
GROUND  
GROUND  
RFOUTPUT2  
C1  
RFOUTPUT3  
GROUND  
GROUND  
GROUND  
RFOUTPUT4  
GROUND  
GROUND  
RFINPUT  
GROUND  
GROUND  
2
3
4
5
6
7
VDD  
8
EnBar  
9
GROUND  
C0  
10  
Evaluation Circuit Board Connections  
Gnd  
C1  
C0  
RF Input  
EnBar  
VDD  
Gnd  
HRF-SW1022-A  
HRF-SW1022  
RF Out4  
RF Out1  
Evaluation Board  
Top View  
RF Out3  
RF Out2  
“0” = CMOS Low, “1” = CMOS  
Hi h  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
mysoiservices@honeywell.com  
2002 1022W  
Published June 2002 Page 3  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-SW1022  
Performance Curves  
Insertion Loss  
Advance Information  
Insertion Loss versus Frequency  
0.00  
-0.50  
-1.00  
-1.50  
-2.00  
-2.50  
-3.00  
-3.50  
-4.00  
-4.50  
-5.00  
The Insertion Loss curve shows the worst  
case loss versus frequency at Vdd = +5.0  
+/- 10%, Ta = 25C, Z0 = 50 Ohms.  
0.00  
0.50  
1.00  
1.50  
2.00  
2.50  
3.00  
Frequency (GHz)  
Isolation  
Isolation versus Frequency  
-20.00  
-30.00  
-40.00  
-50.00  
-60.00  
-70.00  
-80.00  
-90.00  
-100.00  
The Isolation curve shows the typical isolation  
of an “off” state output to the insertion path.  
0.00  
0.50  
1.00  
1.50  
2.00  
2.50  
3.00  
Frequency (GHz)  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
mysoiservices@honeywell.com  
2002 1022W  
Published June 2002 Page 4  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-SW1022  
Advance Information  
Return Loss  
Input / Output Return Losses versus Frequency  
0.00  
-5.00  
-10.00  
-15.00  
-20.00  
-25.00  
-30.00  
-35.00  
-40.00  
-45.00  
-50.00  
The return loss curve shows the input  
return loss S11, the output return loss in  
the insertion path S22, and the output  
return loss in the isolation state S33.  
0.00  
0.50  
1.00  
1.50  
2.00  
2.50  
3.00  
Frequency (GHz)  
Evaluation Circuit Board  
Honeywell's evaluation board provides an  
easy to use method of evaluating the RF  
performance of our switch. Simply connect  
power, DC and RF signals to be measuring  
switch performance in less than 10  
minutes.  
HRF-SW1022 Evaluation Board  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
mysoiservices@honeywell.com  
2002 1022W  
Published June 2002 Page 5  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-SW1022  
Advance Information  
Evaluation Circuit Board Layout Design Details  
Item  
Description  
PCB  
Impedance Matched Multi-Layer FR4  
HRF-SW1022 RF Switch  
Switch  
Chip Capacitor  
RF Connector  
DC Pin  
Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V  
Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector  
Mil-Max Model 800-10-064-10-001 Header Pins  
Ordering Information  
Ordering Number  
Product  
HRF-SW1022-B  
HRF-SW1022-TR  
HRF-SW1022-E  
Delivered In Chip Tubes  
Delivered On Tape And Reel2  
Engineering Evaluation Board  
(Note 2) Contact Honeywell for details  
LPCCTM is a registered Trademark of ASAT Ltd.  
Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume  
any liability arising out of the application or use of any product or circuit described herein; neither does it convey any  
license under its patent rights nor the rights of others.  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
mysoiservices@honeywell.com  
2002 1022W  
Published June 2002 Page 6  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  

相关型号：

HRF-SW1022-TR

 SP4T, 0MHz Min, 6000MHz Max, 1 Func, CMOS, 4 X 4 MM, ULTRA SMALL, QFPN-20
HONEYWELL

HRF-SW1030

 SP6T Absorptive RF Switch DC to 2.5GHz Operation
HONEYWELL

HRF-SW1030-B

 SP6T, 0MHz Min, 2500MHz Max, 1 Func, 3.8dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, LPCC-24
HONEYWELL

HRF-SW1030-E

 SP6T Absorptive RF Switch DC to 2.5GHz Operation
HONEYWELL

HRF-SW1030-FL-TR

 SP6T, 0MHz Min, 2500MHz Max, 3.8dB Insertion Loss-Max, VQFN-24
HONEYWELL

HRF-SW1030-GR-T

 SP6T Absorptive RF Switch DC to 2.5GHz Operation
HONEYWELL

HRF-SW1030-GR-TR

 SP6T Absorptive RF Switch DC to 2.5GHz Operation
HONEYWELL

HRF-SW1030-TR

 SP6T, 0MHz Min, 2500MHz Max, 1 Func, 3.8dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, VQFN, LPCC-24
HONEYWELL

HRF-SW1031

 SP6T Absorptive RF Switch
HONEYWELL

HRF-SW1031-B

 SP6T Absorptive RF Switch
HONEYWELL

HRF-SW1031-E

 SP6T Absorptive RF Switch
HONEYWELL

HRF-SW1031-FL-TR

 Diversity Switch, 0MHz Min, 2500MHz Max, 3.6dB Insertion Loss-Max, VQFN-24
HONEYWELL
©2020 ICPDF网 联系我们和版权申明