HRF-SW1030-E [HONEYWELL]
SP6T Absorptive RF Switch DC to 2.5GHz Operation;型号: | HRF-SW1030-E |
厂家: | Honeywell |
描述: | SP6T Absorptive RF Switch DC to 2.5GHz Operation |
文件: | 总5页 (文件大小:124K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HRF-SW1030
SP6T Absorptive RF Switch DC to 2.5GHz Operation
The Honeywell HRF-SW1030 is a high performance single pole six throw (SP6T)
absorptive RF switch ideal for use in wireless basestation and handset applications
that require minimum power and minimum insertion loss.
The HRF-SW1030 is manufactured with Honeywell's patented Silicon On Insulator
(SOI) CMOS technology, which provides the performance of GaAs with the economy
and integration capabilities of conventional CMOS technology. These switches are
DC coupled to improve lower operating frequency, frequency response and reduce
the number of DC bias points required.
HRF-SW1030 in VQFN Package
FEATURES
•
•
•
•
•
•
•
•
Typical High Isolation Of > 42 dB @ 2 GHz
Typical Low Insertion Loss Of 1.6 dB @ 1 GHz
Integrated CMOS Control Logic
DC-coupled, bi-directional RF Path
Single Positive Supply Voltage
Ultra Small VQFN Packaging
Impedance matched for 50 Ohm systems
Lead-free, RoHS compliant and Green
RF ELECTRICAL SPECIFICATIONS @ + 25oC
Results @ VDD = 5.0 +/- 10%, VSS = 0 unless otherwise stated, Z0 = 50 Ohms
Contact Honeywell for relative performance at other supply configurations
Parameter
Test Condition
Frequency
Minimum
Typical
Maximum
Units
1.0 GHz
2.0 GHz
2.5 GHz
1.6
2.1
2.4
2.5
3.3
3.8
dB
dB
dB
Insertion Loss
1.0 GHz
2.0 GHz
3.0 GHz
36
30
27
50
42
40
dB
dB
dB
Isolation
Return Loss
Input P1dB
-10
-15
dB
VSS =Gnd
VSS = -5V
1.0 GHz
1.0 GHz
16
25
dBm
dBm
Two-Tone Inputs, + 5 dBm
VSS = Gnd
Input IP3
2.0 GHz
2.0 GHz
33
35
dBm
dBm
VSS = -5V
Trise, Tfall
Ton, Toff
10% To 90%
50% Cntl To 90% / 10% RF
10
20
ns
ns
HRF-SW1030
DC ELECTRICAL SPECIFICATIONS @ + 25°C
Parameter
Minimum
3.31
Typical
5.0
Maximum
Units
V
VDD
VSS
IDD
5.5
-5.0
V
<5
35
0.8
VDD
10
uA
V
CMOS Logic Level (0)
CMOS Logic Level (1)
Input Leakage Current
0
VDD – 0.8
V
uA
Note 1 - Performance curves are for VDD = +5.0 +/- 10%
ABSOLUTE MAXIMUM RATINGS1
Parameter
Absolute Maximum
Units
VDD
+6.0
-5.5
V
V
VSS
Vin Digital Logic 0
Vin Digital Logic 1
Input Power
ESD Voltage2
-0.6
V
VDD + 0.6
> 35
V
dBm
V
400
Moisture Sensitivity Level
Operating Temperature Range
Storage Temperature Range
Level 3 @ 260OC
-40 to +85
-65 to +125
°C
°C
Note 1 - Operation of this device beyond any of these parameters may cause permanent damage.
Note 2 - Although the HRF-SW1030 contains ESD protection circuitry on all digital inputs, precautions should be taken to
ensure that the Absolute Maximum Ratings are not exceeded.
Latch-Up: Unlike conventional CMOS digital switches, Honeywell’s HRF-SW1030 is immune to latch-up.
TRUTH TABLE
RF Output
1
RF Output
2
RF Output
3
RF Output
4
RF Output
5
RF Output
6
C2
C1
C0
0
0
0
1
1
1
0
1
1
0
0
1
1
0
1
0
1
0
RFINPUT
RFINPUT
RFINPUT
RFINPUT
RFINPUT
RFINPUT
"0" = CMOS Low, "1” = CMOS High
Note: For codes 000 and 111 all outputs are in the terminated isolation state.
PIN CONFIGURATIONS
Pin
Function
Pin
Function
Pin
Function
1
2
3
4
5
6
GROUND
GROUND
RFOUTPUT5
GROUND
GROUND
RFOUTPUT4
7
8
9
10
11
12
VDD
C2
C1
C0
VSS
13
14
15
16
17
18
GROUND
GROUND
RFOUTPUT2
GROUND
GROUND
RFOUTPUT1
19
20
21
22
23
24
GROUND
GROUND
RFINPUT
GROUND
GROUND
RFOUTPUT6
RFOUTPUT3
Note: Bottom ground plate must be grounded for proper RF performance.
2
www.honeywell.com/microwave
HRF-SW1030
PERFORMANCE CURVES
Insertion Loss
Typical SW1030 Insertion Loss
0.0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
-3.5
-4.0
-4.5
0.0
0.5
1.0
1.5
2.0
2.5
Frequency (GHz)
Isolation
Typical SW1030 Isolation
-25
-30
-35
-40
-45
-50
-55
-60
-65
-70
0
0.5
1
1.5
2
2.5
Frequency (GHz)
www.honeywell.com/microwave
3
HRF-SW1030
PACKAGE OUTLINE DRAWING
Notes
1. Pin 1 identifier can be a combination or a dot and/or chamfer.
2. Dimensions are in millimeters.
GREEN MATERIAL SET
The –GR switches have a Green material set that can withstand a maximum soldering temperature of 260OC.
LEAD FINISH
The package leads are Nickel Palladium Gold (NiPdAu). The configuration being manufactured and delivered today is
lead-free RoHS compliant. Compliant packages have half-etch leadframes and have date codes of 0300 or greater.
LEAD FREE QFN SURFACE MOUNT APPLICATION
Please see Application Note AN310 for assembly process recommendations. The maximum soldering temperature of the
-GR is 260oC (-AU switches are 250 oC). Application Notes can be found at our website: www.honeywell.com/microwave
CIRCUIT APPLICATION INFORMATION
These switches require a DC reference to ground. They may not operate properly when AC coupled on both the RF input
and output without a DC ground reference provided as part of the circuit. See Application Note AN311.
4
www.honeywell.com/microwave
HRF-SW1030
EVALUATION CIRCUIT BOARD
Honeywell's evaluation board provides an easy to use method of evaluating the RF performance of our switch. Simply
connect power; DC and RF signals to be measuring switch performance in less than 10 minutes.
RF Out6
RF Input
HRF-SW1030
Honeywell
RF Out1
RF Out5
HRF-SW1030
Evaluation Board
Top View
RF Out4
RF Out2
Gnd
VDD
C2
RF Out3
C1
C0
VSS
Gnd
HRF-SW1030 Evaluation Board
EVALUATION CIRCUIT BOARD LAYOUT DESIGN DETAILS
Item
Description
PCB
Impedance Matched Multi-Layer FR4
HRF-SW1030 Digital Attenuator
Attenuator
Chip Capacitor
RF Connector
DC Pin
Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V
Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector
Mil-Max Model 800-10-064-10-001 Header Pins
ORDERING INFORMATION
Ordering Number
Delivery Method
Units Per Shipment
HRF-SW1030-GR-TR
HRF-SW1030-GR-T
HRF-SW1030-E
Tape & Reel
Tape
Evaluation Board
2500 Units per Reel
< 2500
One Board Per Box
The new –GR switches will replace and are fully back-compatible with the –AU switches. The –AU switches are obsolete.
FIND OUT MORE
For more information on Honeywell’s Microwave Products visit us online at www.honeywell.com/microwave or contact
us at 800-323-8295 (763-954-2474 internationally).
Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume any liability arising out of the
application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others.
Honeywell
12001 Highway 55
Plymouth, MN 55441
Form #1030W
September 2007
©2007 Honeywell International Inc.
Tel: 800-323-8295
www.honeywell.com/microwave
相关型号:
HRF-SW1030-TR
SP6T, 0MHz Min, 2500MHz Max, 1 Func, 3.8dB Insertion Loss-Max, CMOS, 4 X 4 MM, ULTRA SMALL, VQFN, LPCC-24
HONEYWELL
HRF-SW1031-FL-TR
Diversity Switch, 0MHz Min, 2500MHz Max, 3.6dB Insertion Loss-Max, VQFN-24
HONEYWELL
HRF-SW1040-B
SP4T, 824MHz Min, 1990MHz Max, 1 Func, 13dB Insertion Loss-Max, CMOS, ULTRA SMALL, LPCC
HONEYWELL
©2020 ICPDF网 联系我们和版权申明