FH35-13S-0.3SHW(50)_技术文档

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

^{All non-RoHS product}N^{s h}E^aveW^{been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.}

0.3 mm Pitch, 0.9 mm above the board, Top Contact, Back-Flip

actuator Flexible Printed Circuit ZIF Connectors

FH35 Series

●Small size (35 pos. shown)

0.9mm

■Features

●Easy FPC insertion

1. Low-profile

With the 0.9 mm above the board and width of 3.2 mm the

connectors are used in a space saving applications.

AAccttuuaattoorr

2. Unique Back-Flip rotating actuator

The rotating actuator opens from the back of the connector,

assuring reliable electrical and mechanical connection.

3. Delivered with the actuator open

FPC can be immediately inserted without the need for the

opening of the actuator.

4. Easy FPC insertion

FPC

Entry chamfers at all sides of the FPC insertion slot assure

correct insertion and positioning of the FPC.

5. Standard FPC thickness

Reliable connection with the use of ready available 0.2 mm

thick FPC.

●Completely locked

6. Conductive traces on the PCB can run under

the connector

No exposed contacts on the bottom of the connector.

7. Board placement with automatic equipment

Flat top surface and packaging on the tape-and-reel allows

use of vacuum nozzles.

Standard reel contains 5,000 pieces.

■Applications

Mobile phones, PDA’s, digital cameras, digital camcorders,

camera modules and other compact devices requiring

Flexible Printed Circuit connections using high reliability

extremely small profile connectors.

2008.3

1

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

■Specifications

Operating

temperature range

Storage

temperature range

Current rating

-55 to +85°C (Note 2)

-10 to +50°C (Note 3)

0.2 A (Note 1)

30 Vrms AC

Rating

Operating

humidity range

Relative humidity 90% Storage

max. (No condensation) humidity range

Relative humidity 90%

max. (No condensation)

Voltage rating

Recommended FPC

Item

Thickness: 0.2 0.03, gold plated contact pads

Specification

Conditions

1.Insulation resistance 50 Mø min

100 V DC

2.Withstanding voltage No flashover or insulation breakdown

90 Vrms AC / one minute

100 mø max.

* Including FPC conductor resistance

3.Contact resistance

1 mA AC

10 cycles

Contact resistance: 100 mø max.

No damage, cracks, or parts dislocation

4.Durability

No electrical discontinuity of 1 μs or longer

Frequency: 10 to 55 Hz,

5.Vibration

6.Shock

Contact resistance: 100 mø max.

No damage, cracks, or parts dislocation

single amplitude of 0.75 mm,

10 cycles in each of the 3 axial directions

No electrical discontinuity of 1 μs or longer

Contact resistance: 100 mø max.

No damage, cracks, or parts dislocation

Acceleration: 981 m/s², 6 ms duration,

sine half-wave, 3 cycles in each of the 3 axis

Contact resistance: 100 mø max.

Insulation resistance: 50 Mø min.

No damage, cracks, or parts looseness

7.Humidity

(Steady state)

96 hours at 40ç and humidity of 90 to 95%

Contact resistance: 100 mø max.

Insulation resistance: 50 Mø min.

No damage, cracks, or parts dislocation

Temperature:-55ç➝+15ç to +35ç➝+85ç➝+15ç to +35ç

Time: 30➝ 2 to 3 ➝ 30➝ 2 to 3 minutes

5 cycles

8.Temperature cycle

9.Resistance to

soldering heat

Reflow: At the recommended temperature profile

Manual soldering: 350 10°C for 5 seconds

No deformation of components affecting performance

Note 1: When passing the current through all of the contacts, use 70% of the rated current.

Note 2: Includes temperature rise caused by current flow.

Note 3: The term "storage" refers to products stored for a long period prior to mounting and use.

The operating temperature and humidity range covers the non-conducting condition of connectors after board mounting.

Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and

specifications for a specific part number shown.

■Materials

Part

Material

LCP

Finish

Color: Beige

Remarks

UL94V-0

Insulator

Actuator

PA

Color: Black

Contacts

Metal fittings

Phosphor bronze

Gold plating

-----------------

Pure tin reflow plating

■Ordering information

FH35 - 35S - 0.3 SHW (50)

1

2

3

4

5

1 Series name

: FH35

4 Contact type

2 Number of positions : 19, 25, 33, 35

(45, and 51 pos. are under development)

SHW : SMT horizontal staggered mounting

5 Plating specifications:

3 Contact pitch

: 0.3 mm

(50)

: Nickel barrier gold plating

5,000 pieces / reel

2

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

■Connector Dimensions

A

0.3 0.1

B

0.6 0.1

(0.12)

0.6 0.1

(0.12)

C

Polarizing mark indicator

Number of contacts indicator

B

(0.15)

(0.6)

(D: FPC insertion slot dimension)

E

(3)

(4.2)

(1.45)

B

(1.15)

(0.55)

0.33 0.1

0.15 0.15

0.4 0.1

0.05 0.15

3 0.15

0.1

Note 1 : The coplanarity of each terminal lead is within 0.1.

Note 2 : Slight variations in color of the plastic compounds do not affect form, fit or function.

Note 3 : Reserved for future product expansion. Contact HRS for details on availability.

All dimensions: mm

Part Number

CL No.

Note 3

Number of contacts

A

B

3

C

3.6

4.2

4.8

5.4

6

D

E

RoHS

FH35-13S-0.3SHW(50)

FH35-15S-0.3SHW(50)

FH35-17S-0.3SHW(50)

FH35-19S-0.3SHW(50)

FH35-21S-0.3SHW(50)

FH35-25S-0.3SHW(50)

FH35-27S-0.3SHW(50)

FH35-31S-0.3SHW(50)

FH35-33S-0.3SHW(50)

FH35-35S-0.3SHW(50)

FH35-39S-0.3SHW(50)

FH35-41S-0.3SHW(50)

FH35-45S-0.3SHW(50)

FH35-51S-0.3SHW(50)

13

15

17

19

21

25

27

31

33

35

39

41

45

51

5.5

4.23

4.83

4.93

6.1

3.6

4.2

4.8

5.4

6.6

7.2

8.4

9

5.53

6.7

5.43

6.13

580-1502-3-50

Note 3

7.3

6.03

6.73

7.9

6.63

7.33

580-1504-9-50

Note 3

9.1

7.2

7.8

9

7.83

8.53

9.7

8.43

9.13

YES

Note 3

10.9

11.5

12.1

13.3

13.9

15.1

16.9

9.63

10.33

10.93

11.53

12.73

13.33

14.53

16.33

580-1503-6-50

580-1501-0-50

Note 3

9.6

10.2

11.4

12

10.23

10.83

12.03

12.63

13.83

15.63

9.6

10.8

11.4

12.6

14.4

Note 3

580-1505-1-50

580-1506-4-50

13.2

15

Tape and reel packaging (5,000 pieces/reel).

Order by number of reels.

3

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

BRecommended PCB mounting pattern and metal mask dimensions

(Recommended metal mask thickness: t=0.1)

B

0.05

0.3 0.03

0.6 0.05

(0.23:Metal mask)

0.3 0.05

(0.3:Metal mask)

0.3 0.03

0.6 0.05

(0.23:Metal mask)

0.4 0.05

0.5 0.05

C

0.05

BRecommended FPC Dimensions

F

C

0.05

0.03

0.3 0.07

0.2 0.03

0.6 0.02

0.3 0.02

+0.04

–0.03

0.3

H

Check mark for

press misalignment

(For reference)

+0.04

–0.03

0.3

0.1 0.02

(0.2)

(0.07)

0.6 0.07

B

0.03

0.6 0.07

Dimension M must be 0.5mm minimum when the stiffener is shorter than 2.75 min.

All dimensions: mm

Part Number

CL No.

Note 2

Number of contacts

B

3

C

3.6

4.2

4.8

5.4

6

F

FH35-13S-0.3SHW(50)

FH35-15S-0.3SHW(50)

FH35-17S-0.3SHW(50)

FH35-19S-0.3SHW(50)

FH35-21S-0.3SHW(50)

FH35-25S-0.3SHW(50)

FH35-27S-0.3SHW(50)

FH35-31S-0.3SHW(50)

FH35-33S-0.3SHW(50)

FH35-35S-0.3SHW(50)

FH35-39S-0.3SHW(50)

FH35-41S-0.3SHW(50)

FH35-45S-0.3SHW(50)

FH35-51S-0.3SHW(50)

13

15

17

19

21

25

27

31

33

35

39

41

45

51

4.2

4.8

5.4

6

Note 2

3.6

4.2

4.8

5.4

6.6

7.2

8.4

9

Note 2

580-1502-3-50

Note 2

6.6

7.8

8.4

9.6

10.2

10.8

12

580-1504-9-50

Note 2

7.2

7.8

9

Note 2

580-1503-6-50

580-1501-0-50

Note 2

9.6

10.2

11.4

12

9.6

10.8

11.4

12.6

14.4

Note 2

12.6

13.8

15.6

580-1505-1-50

580-1506-4-50

13.2

15

4

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

BPackaging Specification

●Embossed Carrier Tape Dimensions(Tape width to 24mm max.)

4

0.1

2

8

0.15

0.1

(2.25)

(0.3)

(0.8)

(0.7)

(0.8)

(4.8)

(1.6) Flat surface, for placement with automatic equipment.

Unreeling direction

●Embossed Carrier Tape Dimensions(Tape width 32mm min.)

(2.25)

(0.3)

1.5^+0.1

0

All dimensions: mm

Part Number

CL No.

Note 1

Number of contacts

G

H

–

J

K

L

M

FH35-13S-0.3SHW(50)

FH35-15S-0.3SHW(50)

FH35-17S-0.3SHW(50)

FH35-19S-0.3SHW(50)

FH35-21S-0.3SHW(50)

FH35-25S-0.3SHW(50)

FH35-27S-0.3SHW(50)

FH35-31S-0.3SHW(50)

FH35-33S-0.3SHW(50)

FH35-35S-0.3SHW(50)

FH35-39S-0.3SHW(50)

FH35-41S-0.3SHW(50)

FH35-45S-0.3SHW(50)

FH35-51S-0.3SHW(50)

13

15

17

19

21

25

27

31

33

35

39

41

45

51

16

24

32

7.5

5.7

17.4

25.4

33.4

21.4

29.4

37.4

–

7.5

6.3

–

7.5

6.9

580-1502-3-50

Note 1

–

7.5

–

11.5

14.2

8.1

580-1504-9-50

Note 1

–

9.3

–

9.9

Note 1

–

11.1

11.7

12.4

13.5

14.1

15.3

17.1

580-1503-6-50

580-1501-0-50

Note 1

–

Note 1

–

580-1505-1-50

580-1506-4-50

–

28.4

Tape and reel packaging (5,000 pieces/reel).

Note 1: Reserved for future product expansion. Contact HRS for details on availability.

5

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

BReel Dimensions

(L: INSIDE)

(M: OUTSIDE)

6

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

BTemperature Profile

●Using Lead-free Solder Paste

MAX 250ç

HRS test condition

Solder method

:Reflow, IR/hot air

250

200

150

100

50

(Nihon Den-netsu Co., Ltd.'s

Part Number: SENSBY NR-2)

:Room air

230ç

Environment

200ç

(ç)

Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu

(Senju Metal Industry, Co., Ltd.'s

Part Number:M705-221CM5-42-10.5)

150ç

Test board

Land dimensions :0.3mm∞0.65mm, 0.3mm∞0.8mm

Metal mask :0.23∞0.55, 0.23∞0.65∞0.1mm thick

:Glass epoxy 25mm∞50mm∞0.8mm thick

The temperature profiles shown are based on the above

conditions.

25ç

(60sec.) 90 sec. to 120 sec.

Preheating

(60sec.)

Soldering

0

In individual applications the actual temperature may vary,

depending on solder paste type, volume / thickness and board

size / thickness. Consult your solder paste and equipment

manufacturer for specific recommendations.

Start

Time (Seconds)

7

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

BRecommended FPC construction

●Contact FPC manufacturer for specific details

FPC : Flexible Printed Circuit

1. Using Single-sided FPC

Material Thickness

(μm)

Material Name

Material

Connecting side

Covering film layer

Cover adhesive

Polyimide 1 mil thick.

25

0.2μm thick gold plated over 1 to 5μm

nickel underplating

( )

3

Surface treatment

Copper foil

Cu

1oz

35

25

Base adhesive

Base film

Polyimide 1 mil thick

25

Reinforcement material adhesive Thermosetting adhesive

40

Stiffener

Polyimide 3 mil thick

Total

75

203

Back side

FPC : Flexible Printed Circuit

2. Using Double-sided FPC

Material Thickness

(μm)

Material Name

Material

Connecting side

Polyimide 1 mil thick

Covering layer film

Cover adhesive

Surface treatment

Through-hole copper

Copper foil

25

0.2μm thick gold plated over 1 to 5μm

nickel underplating

( )

3

Cu

15

18

25

18

25

197

Cu

1/2oz

Base adhesive

Base film

Polyimide 1 mil thick

Base adhesive

Copper foil

Cu

1/2oz

Cover adhesive

Covering film layer

Reinforcement material adhesive

Stiffener

Polyimide 1 mil thick

Thermosetting adhesive

Polyimide 1 mil thick

Total

Back side

*

To prevent release of the FPC due to its bending, use of the double sided FPC with copper foil on the back side is NOT RECOMMENDED.

8

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

BConnector Operation and Precautions

Operation

Exercise care when handling connectors. Follow recommendations given below.

1. As delivered

1

Delivered with the actuator open. There is no need to operate the

actuator prior to the insertion of the FPC.

The actuator is open when delivered in

the embossed tape packaging

2. FPC insertion

1

Make sure that the conductive pads are facing up.

FPC conductive pads are facing up

2

Align the FPC perpendicular with the connector and insert it firmly

all the way.

3. FPC correct insertion verification

A visual comparison of the edge of the housing opening and the FPC pattern boundary will prevent diagonal inser-

tion and partial insertion errors.

FPC pattern boundary

Edge of the insulator body

Correct insertion

Diagonal insertion

Partial insertion

9

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Operation

4. Locking

1

After FPC/FFC insertion, rotate the actuator down to a full stop, pushing it at the center.

Rotate

Excessive force after the actuator is already closed

Do NOT close at the ends.

Push at the center of the actuator.

5. FPC removal (Lock release)

Carefully rotate the actuator up to 90°, lifting it at the center.

Rotate (lift)

Do not attempt to open more than 90°

Lift at the center

Do not open (lift) at one end.

* The actuator opens by rotating it in the direction OPPOSITE to the direction of the insertion of the FPC.

DO NOT attempt to open it from the same side as the insertion of the FPC.

10

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Precautions when mounting connectors on the PCB

◆Handling before mounting on PCB

Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.

◆PC board warpage

Minimize the warpage as much as possible. The connector is straight within 0.1 mm max. Make sure that the

mounting area flatness can accept the connector terminals without causing any failure of the solder joints.

◆Forces on the board

◆When braking the large PC board into individual boards exercise care NOT to damage the installed connectors.

◆When attaching the boards or other components with the screws make sure that any stresses will NOT cause

board deflections affecting the mounting areas of the connector

Connector

PCB

Other precautions

◆When hand soldering:

Do not perform hand soldering with the FPC inserted in the connector.

• Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.

• Do not use excessive amount of solder or flux compounds.

Operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds.

11


型号：	FH35-13S-0.3SHW(50)
厂家：	HRS
描述：	Card Edge Connector, 13 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT PC 连接器
文件：	总11页 (文件大小：434K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

FH35-13S-0.3SHW(50) [HRS]

相关型号：

FH35-15S-0.3SHW(50)

FH35-17S-0.3SHW(50)

FH35-19S-0.3SHW(99)

FH35-21S-0.3SHW(50)

FH35-25S-0.3SHW(10)

FH35-25S-0.3SHW(50)

FH35-25S-0.3SHW(99)

FH35-27S-0.3SHW(50)

FH35-27S-0.3SHW(99)

FH35-33S-0.3SHW(50)

FH35-33S-0.3SHW(99)

FH35-35S-0.3SHW(50)