W.FL-LP-IN-1 [HRS]
Tool And Machinery;型号: | W.FL-LP-IN-1 |
厂家: | HRS |
描述: | Tool And Machinery 连接器 连接器支架 |
文件: | 总6页 (文件大小:178K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Ultra Small Surface Mount Coaxial Connectors – 1.4mm Mated Height
W.FL Series
Up to 6 GHz Transmission Speed
Occupied Mounting Area
ꢀFeatures
Mated height comparison (with U.FL Series)
1. Nominal mated height of 1.4 mm (Max. 1.5 mm)
2. Small mounting area
2
The receptacle occupies an area of 3.4mm .
3. Lightweight
U.FL-LP(V)-040
Receptacle:
5.6 mg
W.FL-LP-040
W.FL Series
Right-angle plug: 18.6 mg
4. Accepts high frequency transmission.
To meet the frequency requirements of a wide variety of
miniature devices, the connectors offer high frequency
performance from DC to 6 GHz, with a V.S.W.R. of
1.35max.
U.FL Series
5. Automatic board placement
Packaged on tape-and-reel the receptacles can be
placed with vacuum nozzles of the automatic placement
equipment.
6. Plugs are terminated with ultra-fine coaxial
(fluorinated resin insulated) cable
W. FL Plug and Receptacle
Standard ultra-fine coaxial cable of 0.81 mm diameter
(single braid shielding) is used for the plug termination,
assuring secure and stable connections.
7. Simple connector mating / unmating
Use of available extraction tool assures correct
disconnection of the plug and receptacle.
Plug
2.85
Cable
Dia. 0.81
8. Verification of the fully mated condition
Tactile click sensation confirms fully mated condition,
assuring complete electrical and mechanical connection.
W.FL-R-SMT-1
Receptacle
ꢀApplications
Cellular phones, PHS, mobile phones, wireless
communication devices, electronic measuring instruments,
GPS, wireless LAN, Bluetooth and any application requiring
high frequency transmission using small coaxial connectors.
2009.2w
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors – 1.4mm Mated Height
ꢀSpecifications
Nominal characteristic impedance
Operating temperature range
Operating humidity
-40°C to +90°C
90% RH max.
50 ohms
Ratings
Frequency range
DC to 6 GHz
Item
Specification
Conditions
10mA max.
Center contact: 20m ohms max.
Outer contact: 10m ohms max.
1. Contact resistance
2. Insulation resistance 500M ohms min.
100V DC
3. Withstanding voltage No flashover or insulation breakdown
1.3 Max.
200V AC / 1 minute
Up to 3 GHz
3 to 6 GHz
*
4. V.S.W.R.
1.35 Max.
Contact resistance
Center contact: 25m ohms max.
Outer contact: 15m ohms max.
5. Durability
6. Vibration
7. Shock
20 cycles
No damage, cracks, or parts dislocation
Frequency: 10 to 100 Hz, single amplitude of 1.5mm
No electrical discontinuity of 1 µs or longer
No damage, cracks, or parts dislocation
2
Acceleration: 59 m/s , in each of 3 axis
5 cycles
2
Acceleration of 735 m/s , 11 ms continuous time
No electrical discontinuity of 1 µs or longer
No damage, cracks, or parts dislocation
Waveform: sine half-wave, 3 cycles in each of the
3 axis
Insulation resistance: 10M ohms min. (high humidity)
Insulation resistance: 500M ohms min. (dry)
No damage, cracks, or parts dislocation
8. Humidity
96 hours at temperature of +40°C and humidity of 95%
Temperature:-40°C/+5°C to +35°C/+90°C/+5°C to +35°C
Time: 30 min./ 3 min. / 30 min. / 3 min.
5 cycles
No damage, cracks, or parts dislocation
Contact resistance: 25m ohms max. (Center)
15m ohms max. (Outer)
9. Temperature cycle
10. Salt spray test
No excessive corrosion
5% salt water solution, 48 hours
*V.S.W.R. Measurement System
Measured as shown on the block diagram below.
Note1: Measurement way of a W.FL Cable assembly (plug)
Network Analyzer
Test Set
W.FL Cable assembly (plug) is measured with SMA conversion adapters
mated with W.FL plugs at both ends of a 100cm coaxial cable harness
Note2: Measurement way of a W.FL receptacle
Test Port
D.U.T Termination
W.FL receptacle, which is mounted on a 50 ohms glass epoxy board, is
measured with a SMA conversion adapter.
Test Port Cable
ꢀMaterials / Finishes
ꢀPlug – right angle
Part
Material
Phosphor bronze
Phosphor bronze
PBT
Finish
Remarks
-------
Shell
Silver plated
Gold plated
Color: Black
Female center contact
Insulator
-------
UL94V-0
ꢀReceptacle
Part
Material
Brass
Finish
Remarks
-------
Male center contact
Insulator
Gold plated
Color: Black
Silver plated
LCP
UL94V-0
-------
Shell
Phosphor bronze
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors – 1.4mm Mated Height
ꢀReceptacle
B
Recommended PCB
mounting pattern
0.85
0.3
0.25
2.6
1.4
0.5
0.3
SIG
1.7
2
GND
SIG
GND
No conductive traces in this area
Note : Receptacles of (10) specification are sold by the reel
Recommended screen thickness: 0.1mm to 0.12mm
All dimensions: mm
(2,000 pieces).
Order by reel.
Part Number
W.FL-R-SMT-1(10)
W.FL-R-SMT-1(40)
CL No.
Packaging
Weight / EA
RoHS
CL331-0482-6-10
CL331-0482-6-40
Reel (2000 pieces/reel)
Reel (5000 pieces/reel)
5.6 mg
YES
BPackaging Specifications
Embossed Carrier Tape Dimensions
2
4
Center contact terminal
8
Unreeling direction
Reel Dimensions
14
1.8
14
1.8
W.FL-R-SMT-1(40):
Reel material: Plastic
W.FL-R-SMT-1(10):
Reel material: Corrugated board
All dimensions: mm
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales represent
W.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors – 1.4mm Mated Height
ꢀPlug Assembly (Plug)
2.85
All dimensions: mm
Plugs can be ordered only as terminated cable assemblies.
ꢀHow to Specify Plug Cable Assembly
Double-ended cable assembly
Single-ended cable assembly
L
L
ꢀOrdering Information
ꢀStandard tolerances for (L) (Note 2)
(L)
Standard Tolerance
[ ]
--
--
T --
--
L=35mm to 200mm
L=200mm to 500mm
L=500mm to 1000mm
L= Longer than 1000mm
± ±mm (Note 1)
± 8mm
W.FL 2LP 04N
A (L)
1
2
3
4
5
± 12mm
± 1.5ꢀ oꢁ (L)
Series name
W.FL
LP : Single ended
2LP : Double ended
1
2
Note1:Minimum available length (L) is 35mm
Note2:Contact nearest HRS representative if different
tolerances are required.
Assembly type
Note3:Contact Nearest HRS representative if one end
requires preparation.
Cable type
Cable color
04N : Dia. 0.81mm ultra-fine coaxial cable
1: White, 2: Black
3
4
5
Total length (mm) Length (L)
Part No. oꢁ Cable Assembly
W.FL-2LP-0±N1T-A-(L)
Description
Dia. 0.81mm double ended coaxial cable, color: white
RoHS
YES
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales represent
W.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors – 1.4mm Mated Height
ꢀConversion Adapters
ꢀ SMA Conversion Adapter (W.FL side jack – SMA side plug)
(10.3)
8HEX
W.FL
SMA
Note:Used for performance measurements only.
The W.FL mating side has lower retention
force than the regular product when mated to
the corresponding part.
Part No.
CL No.
RoHS
HRMP-W.FLJ(±0)
311-0367-3-±0
YES
ꢀ SMA Conversion Adapter (W.FL side plug – SMA side jack)
13.8
±.05
6
(
)
5.6
SMA
W.FL
1/±-36UNS-2A
Note:Used for performance measurements only.
The W.FL mating side has lower retention
force than the regular product when mated to
the corresponding part.
Part No.
CL No.
RoHS
HRMJ-W.FLP(±0)
311-0368-6-±0
YES
ꢀ SMA Conversion Adapter
( 18.35
)
6
( ± )
5.5
1/±-36UNS-2A
Note:When mating with corresponding part (W.FL-
R-SMT-1) it must be pressed down and held
to make complete connection.
Part No.
CL No.
RoHS
HRMJ-W.FLP-ST1(±0)
311-0386-8-±0
YES
ꢀPlug Extraction Tool
(100 )
±0
Part No.
CL No.
RoHS
W.FL-LP-N
331-0±92-0
YES
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
W.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors – 1.4mm Mated Height
ꢀPrecautions
1. Plug
(1) Mating / unmating
• Unmating Insert both ends of the extraction tool under the plug (from the direction opposite to the Cable
termination), as shown and pull-up in the direction perpendicular to the mounting surface of the
receptacle.
W.FL-LP-N plug extraction tool
ꢀRecomended the use of the extraction tool for unmating.
Any attempt of unmating by pulling on the cable may result in
W.FL Cable
Assembly
damage and affect the mechanical / electrical performance.
W.FL-R-SMT-1
• Mating
Do not attempt to insert on an extreme angle.
(2) Pull forces on the
cable after connectors
are mated
W.FL-LP-040
Cable Assembly
∞
∞
W.FL-R-SMT-1
Receptacle
After the connectors are mating, do not apply
a load to the cable in excess of the values
indicated in the diagram.
2N max
(3) Precautions
Do not twist connectors excessively during mating / unmating.
2. Receptacle
(1) Recommended reflow
temperature profile
250 ç max. for
10 seconds
[
]
ç
260
240
220
200
180
160
140
120
100
80
230ç
220ç
Preheat
(130 to 180ç)
120 seconds max.
50 seconds max.
60 seconds max.
Time
q The temperature of the printed circuit board surface temperature at the points of contact with the terminals.
w Reflow soldering should be performed at a printed circuit surface temperature of 250°C max.
e In individual applications the actual temperature may vary, depending on the solder paste type, volume / thickness and
board size / thickness. Consuly your solder paste and equipment manufacturer for specific recommendations.
(2) Manual soldering
Soldering iron temperature: 350°C, Soldering time: for 5 seconds max.
(3) Recommended metal
mask thickness
0.1 mm to 0.12 mm
2 times
(4) Reflow cycles
3. Operating environment and storage conditions
The connectors are not designed to operate in the following environments:
• Exposed to a excessive amounts of fine particles and dust
(1) Operating environment
• Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses.
• Environments having large rapid variations in temperature.
(2) Storage conditions -
Receptacle
Store in the Hirose Electric packaging.
Temperature: -10 to +40ç, Humidity: 85% max.
Use within 6 months of delivery.
Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 02/2009. Contents are subject to change without notice for the purpose of improvements.
6
相关型号:
W.FL-R-SMT-1(60)
RF Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Receptacle
HRS
©2020 ICPDF网 联系我们和版权申明