BGSA149MN10 [INFINEON]
天线相关器件;型号: | BGSA149MN10 |
厂家: | Infineon |
描述: | 天线相关器件 |
文件: | 总2页 (文件大小:118K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SP005748247
BGSA149MN10
Ultra small antenna tuning SP4T with resonance stoppers
Features
Low RON resistance of 1.5 Ω in ON state
Low COFF capacitance of 80 fF in OFF state
RF operating voltage handling 50 V in OFF state
MIPI RFFE 2.1 control interface
Support both 1.8V and 1.2V VIO operation
External USID_SEL pin enabling 4 default USID addresses
Small form factor 0.95 mm x 1.3 mm (MSL1, 260 °C per JEDEC J-STD-020)
Potential applications
Impedance, antenna and Inductance tuning
Tunable filters
Description
The BGSA149MN10 is a single-pole four throws (SP4T) antenna tuning switch optimized for RF applications up
to 7.125GHz. The BGSA149MN10 is made of 4 low ON resistance / low OFF capacitance series switches and 4
shunt to ground switches enabling on-demand open-reflective or short-reflective OFF ports behaviour. This last
feature is of great value to reduce antenna engineer development time in case of unwanted antenna resonance
or to improve antenna efficiency with less component tuning effort.
Datasheet Summary
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
page 1 of 2
Revision 1.0
2022-10-24
Ultra small antenna tuning SP4T with resonance stoppers
Block diagram and ordering information
Figure 1 BGSA149MN10 Block diagram
Table 1 Ordering Information
Type
Marking
Package
Product name
BGSA149MN10
A9
TSNP-10-9
BGSA 149MN10 E6327
For more technical information, please contact our Technical Assistance Center or your local Infineon representative.
Trademarks
All referenced product or service names and trademarks are the property of their respective owners.
IMPORTANT NOTICE
The information given in this document shall in no For further information on the product, technology,
Edition 2019-09-16
event be regarded as a guarantee of conditions or delivery terms and conditions and prices please
Published by
characteristics (“Beschaffenheitsgarantie”) .
contact your nearest Infineon Technologies office
(www.infineon.com).
Infineon Technologies AG
81726 München, Germany
With respect to any examples, hints or any typical
values stated herein and/or any information
regarding the application of the product, Infineon
Technologies hereby disclaims any and all
warranties and liabilities of any kind, including
without limitation warranties of non-infringement
of intellectual property rights of any third party.
WARNINGS
Due to technical requirements products may
contain dangerous substances. For information on
the types in question please contact your nearest
Infineon Technologies office.
© 2022 Infineon Technologies AG.
All Rights Reserved.
Do you have a question about this
document?
In addition, any information given in this document
is subject to customer’s compliance with its
obligations stated in this document and any
applicable legal requirements, norms and
standards concerning customer’s products and any
use of the product of Infineon Technologies in
customer’s applications.
Except as otherwise explicitly approved by Infineon
Technologies in
a written document signed by
authorized
representatives
of
Infineon
Email: erratum@infineon.com
Technologies, Infineon Technologies’ products may
not be used in any applications where a failure of
the product or any consequences of the use thereof
can reasonably be expected to result in personal
injury.
Document reference
ifx1
The data contained in this document is exclusively
intended for technically trained staff. It is the
responsibility of customer’s technical departments
to evaluate the suitability of the product for the
intended application and the completeness of the
product information given in this document with
respect to such application.
相关型号:
©2020 ICPDF网 联系我们和版权申明