OM1325SM [INFINEON]
Regulator, 1 Output, BIPolar, CDSO6,;型号: | OM1325SM |
厂家: | Infineon |
描述: | Regulator, 1 Output, BIPolar, CDSO6, CD |
文件: | 总4页 (文件大小:110K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PD-97264
Three Terminal, Adjustable
Negative Voltage Regulator
OM1325SM
1.5A
Product Summary:
Adjustable
VOUT
Standard Military
Part Number
VIN
Package
Drawing Number
OM1325SM
7703406M
-4.25V to -41.25V -1.2V to -37V SMD-3
SMD-3
These three terminal negative voltage regulators are
supplied in hermetically sealed packages. All
protective features are designed into the circuit,
including thermal shutdown, current-limiting, and safe-
area control. With heat sinking, these devices can
deliver up to 1.5 amps of output current. The unit also
features output voltages that can be fixed from -1.2
volts to -37 volts using external resistors.
Features:
n Similar to Industry Standard LM137A
n Approved to DSCC Standardized Military
Drawing Number 7703406
n Built-in Thermal Overload Protection
n Short Circuit Current Limiting
n Maximum Output Voltage Tolerence is
Guaranteed ±1%
n This part is also available in
TO-257AA Package as OM1325ST(Isolated),
TO-257AA Package as OM1325NT(Non-Isolated),
SMD-1 Package as OM1325NM,
TO-204 Package as OM1325NK
Absolute Maximum Ratings @ TC = 25°C
Parameter
Symbol
VOUT
VIN
Value
-1.2 to -37
-4.25 to -41.25
1.5
Units
Recommended Output Voltage Range
Recommended Input Voltage Range
Output Current
VDC
IOUT
PD
A
W
20
Power Dissipation
Input - Output Voltage Differential
Thermal Resistance, Junction to Case
Operating Temperature Range
Storage Temperature Range
VDIFF
RTHJC
TJ
TS
TL
40
3.5
-55 to +150
-65 to +150
300
V
°C/W
°C
Lead Temperature (Soldering 10 seconds)
www.irf.com
1
10/27/06
OM1325SM
Electrical Characteristics: -55°C £ TA £ 125°C, IL = 8.0mA (Unless Otherwise Specified)
Parameter
Test Conditions
VDIFF = 3.0V, TA = 25°C
Symbol Min. Max. Units
-1.262 -1.238
VREF
Reference Voltage
V
VDIFF = 3.0V
VDIFF = 40V
-1.280 -1.220
-1.280 -1.220
≤
≤
3.0V VDIFF 40V, TA = 25°C
-4.5
-13.8
-25
4.5
13.8
25
RLINE
Line Regulation
Load Regulation
Thermal Regulation
≤
≤
3.0V VDIFF 40V
≤
≤
8.0mA IL 1.5A, VDIFF = 5.0V
≤
≤
8.0mA IL 1.5A, VDIFF = 12V , TA = 25°C
-25
25
RLOAD
mV
≤
≤
8.0mA IL 200mA, VDIFF = 40V, TA = 25°C
8.0mA ≤ IL ≤ 100mA, VDIFF = 40V
VIN = -14.6V, IL = 1.5A
-25
25
-50
50
VRTH
-5.0
66
5.0
-
PD = 20W, t = 10ms, TA = 25°C
f = 120Hz, VOUT = VREF
RN
Ripple Rejection
dB
CADJ = 10µF
Adjustment Pin Current
VDIFF = 3.0V
-
-
100
100
5.0
5.0
3.0
3.0
IADJ
VDIFF = 40V
µA
IADJ (line)
IADJ (load)
3.0V ≤ VDIFF ≤ 40V
-5.0
-5.0
-
Adjustment Pin Current Change
Minimum Load Current
8.0mA ≤ IL ≤ 1.5A, VDIFF = 5.0V
VDIFF = 3.0V, VOUT = -1.4V(forced)
VDIFF = 10V, VOUT = -1.4V (forced)
VDIFF = 40V, VOUT = -1.4V (forced)
VDIFF = 5.0V
ILmin
mA
A
-
-
5.0
3.5
1.5
0.24
ICL
Current Limit
NOTES:
VDIFF = 40V, TA = 25°C
1.2
Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
If not tested, shall be guaranteed to the specified limits.
Denotes the specifications which apply over the full operating temperature range.
2
www.irf.com
OM1325SM
Standard Application
IPROG
R2
+
+
CIN*
CO**
1.0 F
1.0 F
R1
120
IADG
OM1325SM
-VIN
+VIN
-VOUT
+VOUT
* Cin is required if regulator is located more than 4 inches from power supply filter. A 1.0µF solid
tantalum or 10µF aluminum electrolytic is recommended.
** Co is necessary for stability. A 1.0µF solid tantalum or 10µF aluminum electrolytic is recommended.
VOUT = -1.25V (1+ R2/R1)
www.irf.com
3
OM1325SM
Case Outline and Dimensions - SMD-3
NOTES
PIN ASSIGNMENTS
Pin 1 - Adjust
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994
2. CONTROLLING DIMENSION: INCH
3. DIMENSIONS ARE SHOWN IN INCHES
4. TOLERANCES ARE ±0.010 U.O.S
5. SEE INDIVIDUAL DATA SHEETS FOR PIN ASSIGNMENTS
Pin 2 - Input
Pin 3 - Output
Case - Isolated
6. OUTLINE USED WITH OM PART NUMBERS ONLY
Part Numbering Nomenclature
OM 1325
S
M
M
Screening
M = MIL-PRF-38535
Package Code
M = SMD-3
Device Number
Isolated / Non-Isolated
S = Isolated
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776
Data and specifications subject to change without notice. 10/2006
4
www.irf.com
相关型号:
OM1325SMM
Adjustable Negative Standard Regulator, 1.2V Min, 37V Max, BIPolar, PDSO3, HERMETIC SEALED, SMD3-3
INFINEON
OM1325SMMPBF
Adjustable Negative Standard Regulator, 1.2V Min, 37V Max, HERMETIC SEALED, SMD3-3
INFINEON
OM1325STM
Three Terminal, Precision Adjustable Negative Voltage Regulator In Hermetic Style Packages
ETC
OM1325STMPBF
Adjustable Negative Standard Regulator, 1.2V Min, 37V Max, MSFM3, ISOLATED, HERMETIC SEALED, TO-257, 3 PIN
INFINEON
OM1326NMM
Hi-Rel Adjustable Voltage 3-Terminal Positive Regulator - A OM1326NMM with Standard Packaging
INFINEON
OM1326SMM
Hi-Rel Adjustable Voltage 3-Terminal Positive Regulator - A OM1326SMM with Standard Packaging
INFINEON
©2020 ICPDF网 联系我们和版权申明