KPA-2107QBC-D [KINGBRIGHT]
2.1*0.6*1.0mm SMD LED kingbright 今台;
| 型号： | KPA-2107QBC-D |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | 2.1*0.6*1.0mm SMD LED kingbright 今台 |
| 文件： | 总5页 (文件大小：778K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2.1x0.6mm RIGHT ANGLE SURFACE LED
LAMP
Part Number: KPA-2107QBC-D
Blue
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Descriptions
z 2.1x1.0x0.6mm right angle SMD LED, 0.6mm thickness.
z Low power consumption.
z The Blue source color devices are made with InGaN
Light Emitting Diode.
z Wide viewing angle.
z Electrostatic discharge and power surge could damage
the LEDs.
z Ideal for backlight and indicator.
z Package: 2000pcs / reel.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
z Moisture sensitivity level : level 3.
z Tinned pads for improved solderability.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2.Tolerance is ±0.1(0.004") unless otherwise noted.
3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications
代理商深圳市容感科技有限公司
程梦：0755-83539752
DATE: JUN/01/2016
DRAWN: L.T.Zhang
QQ：2093686917
SPEC NO: DSAO5428
REV NO: V.2B
CHECKED: Allen Liu
PAGE: 1 OF 5
APPROVED: Wynec
ERP: 1203014738
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
Typ.
2θ1/2
KPA-2107QBC-D
Notes:
Blue (InGaN)
Water Clear
40
80
170°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Blue
Typ.
460
465
25
Max.
Units
m
nm
nm
pF
Test Conditions
IF=20mA
Blue
IF=20mA
Blue
IF=20mA
Blue
10
3.3
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
Blu
4
V
Reverse Current
ue
50
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is tracele tCIE127-07 sandards.
4. Excess driving current and / ating teperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
120
30
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
150
5
Electrostatic Discharge Threshold (HBM)
Operating Temperature
Storage Temperature
250
V
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref
JEDEC/JESD625-A and JEDEC/J-STD-033.
代理商深圳市容感科技有限公司
程梦：0755-83539752
DATE: JUN/01/2016
DRAWN: L.T.Zhang
QQ：2093686917
SPEC NO: DSAO5428
REV NO: V.2B
CHECKED: Allen Liu
PAGE: 2 OF 5
APPROVED: Wynec
ERP: 1203014738
Blue
KPA-2107QBC-D
代理商深圳市容感科技有限公司
程梦：0755-83539752
DATE: JUN/01/2016
DRAWN: L.T.Zhang
QQ：2093686917
SPEC NO: DSAO5428
REV NO: V.2B
CHECKED: Allen Liu
PAGE: 3 OF 5
APPROVED: Wynec
ERP: 1203014738
KPA-2107QBC-D
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reeenion
Tape Dimensions
(Units : mm)
代理商深圳市容感科技有限公司
程梦：0755-83539752
DATE: JUN/01/2016
DRAWN: L.T.Zhang
QQ：2093686917
SPEC NO: DSAO5428
APPROVED: Wynec
REV NO: V.2B
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203014738
PACKING & LABEL SPECIFICATIONS
KPA-2107QBC-D
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes
代理商深圳市容感科技有限公司
程梦：0755-83539752
DATE: JUN/01/2016
DRAWN: L.T.Zhang
QQ：2093686917
SPEC NO: DSAO5428
REV NO: V.2B
CHECKED: Allen Liu
PAGE: 5 OF 5
APPROVED: Wynec
ERP: 1203014738
相关型号：
©2020 ICPDF网 联系我们和版权申明