LSBI3833-L32 [LIGITEK]
ROUND TYPE LED LAMPS; ROUND型LED灯型号: | LSBI3833-L32 |
厂家: | LIGITEK ELECTRONICS CO., LTD. |
描述: | ROUND TYPE LED LAMPS |
文件: | 总6页 (文件大小:110K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
ROUND TYPE LED LAMPS
Pb
Lead-Free Parts
LSBI3833/L32
DATA SHEET
DOC. NO : QW0905-LSBI3833/L32
REV.
: A
28 - Apr.
- 2008
DATE
:
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
LSBI3833/L32
Page
PART NO.
1/5
Package Dimensions
5.0
7.7
5.6
8.7
1.5MAX
25.0MIN
1.0MIN
□0.5
TYP
2.54TYP
+
-
Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted.
2.Specifications are subject to change without notice.
Directivity Radiation
0°
-30°
30°
-60°
60°
0
100% 75% 50% 25%
25% 50% 75%100%
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 2/5
PART NO. LSBI3833/L32
Absolute Maximum Ratings at Ta=25 ℃
Ratings
SBI
Symbol
Parameter
UNIT
IF
IFP
30
Forward Current
mA
mA
mW
Peak Forward Current
Duty 1/10@10KHz
70
Power Dissipation
PD
Ir
120
Reverse Current @5V
Electrostatic Discharge( * )
Operating Temperature
Storage Temperature
50
μA
V
500
ESD
Topr
Tstg
-20 ~ +80
-30 ~ +100
℃
℃
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
*
Typical Electrical & Optical Characteristics (Ta=25 ℃)
Forward
voltage
@20mA(V) @20mA(mcd)
Luminous
intensity
Viewing
angle
2θ 1/2
(deg)
Peak
wave
length
λPnm
Spectral
halfwidth
△λnm
Dominant
wave
length
COLOR
MATERIAL
InGaN/SiC
PART NO
λDnm
Typ.
3.8
Typ.
Max.
4.7
Lens
Water Clear
Min.
Emitted
Blue
65
300 550
LSBI3833/L32
10
465
430
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LSBI3833/L32
Page 3/5
Typical Electro-Optical Characteristics Curve
SBI CHIP
Fig.2 Relative Intensity vs. Wavelength
Fig.1 Forward current vs. Forward Voltage
30
25
20
15
10
5
1.0
0.5
0
0
1
2
3
4
5
680
380 430 480 530 580 630
Wavelength (nm)
Forward Voltage(V)
Fig.3 Relative Intensity vs. Forward Current
125
Fig.4 Relative Intensity vs. Lead Temperature
10
100
75
50
25
0
1
0
25 30
45
15 20
35 40
0
10
5
0
25
50
75
100
Lead Temperature (℃)
Forward Current (mA DC)
Fig.5 Forward Current vs. Ambient Temperature
40
30
20
10
0
25
50
75
100
0
Ambient Temperature (℃)
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LSBI3833/L32
Page 4/5
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350°C Max
Soldering Time:3 Seconds Max(One time only)
Distance:2mm Min(From solder joint to body)
2.Wave Soldering Profile
Dip Soldering
Preheat: 120°C Max
Preheat time: 60seconds Max
Ramp-up
2°C/sec(max)
Ramp-Down:-5°C/sec(max)
Solder Bath:260°C Max
Dipping Time:3 seconds Max
Distance:2mm Min(From solder joint to body)
Temp(°C)
260°C3sec Max
260°
5°/sec
max
120°
2°/sec
25°
0°
max
0
50
150
Time(sec)
100
Preheat
60 Seconds Max
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 5/5
PART NO. LSBI3833/L32
Reliability Test:
Reference
Standard
Description
Test Item
Test Condition
1.Under Room Temperature
2.If=20mA
3.t=1000 hrs (-24hrs, +72hrs)
This test is conducted for the purpose
of detemining the resistance of a part
in electrical and themal stressed.
MIL-STD-750: 1026
MIL-STD-883: 1005
JIS C 7021: B-1
Operating Life Test
The purpose of this is the resistance of
the device which is laid under condition
of high temperature for hours.
High Temperature
Storage Test
1.Ta=105 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
MIL-STD-883:1008
JIS C 7021: B-10
The purpose of this is the resistance
of the device which is laid under
condition of low temperature for hours.
Low Temperature
Storage Test
1.Ta=-40 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
JIS C 7021: B-12
1.Ta=65℃±5℃
2.RH=90%~95%
3.t=240hrs ±2hrs
High Temperature
High Humidity Test
The purpose of this test is the resistance
of the device under tropical for hours.
MIL-STD-202:103B
JIS C 7021: B-11
The purpose of this is the resistance of
the device to sudden extreme changes
in high and low temperature.
1.Ta=105 ℃±5℃&-40℃±5℃
(10min) (10min)
2.total 10 cycles
MIL-STD-202: 107D
MIL-STD-750: 1051
MIL-STD-883: 1011
Thermal Shock Test
This test intended to determine the
thermal characteristic resistance
of the device to sudden exposures
at extreme changes in temperature
when soldering the lead wire.
MIL-STD-202: 210A
MIL-STD-750: 2031
JIS C 7021: A-1
Solder Resistance
Test
1.T.Sol=260 ℃±5℃
2.Dwell time= 10 ±1sec.
MIL-STD-202: 208D
MIL-STD-750: 2026
MIL-STD-883: 2003
JIS C 7021: A-2
This test intended to see soldering well
performed or not.
1.T.Sol=230 ℃±5℃
2.Dwell time=5 ±1sec
Solderability Test
相关型号:
©2020 ICPDF网 联系我们和版权申明