Q6012NH556 [LITTELFUSE]
Alternistor TRIAC, TO-263AB, ROHS COMPLIANT, PLASTIC, D2PAK-3;
| 型号： | Q6012NH556 |
| 厂家： | 
LITTELFUSE |
| 描述： | Alternistor TRIAC, TO-263AB, ROHS COMPLIANT, PLASTIC, D2PAK-3 LTE 三端双向交流开关 |
| 文件： | 总8页 (文件大小：891K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Teccor® brandThyristors
12 Amp Alternistor (High Communitation) Triacs
Qxx12xHx Series
®
Description
12 Amp bi-directional solid state switch series is designed
for AC switching and phase control applications such as
motor speed and temperature modulation controls, lighting
controls, and static switching relays.
Alternistor type devices only operate in quadrants I, II, & III
and are used in circuits requiring high dv/dt capability.
Features & Benefits
• RoHS Compliant
contact bounce that
create voltage transients
• Glass – passivated
junctions
• No contacts to wear
out from reaction of
switching events
• Voltage capability up to
1000 V
Agency Approval
• Restricted (or limited) RFI
generation, depending
on activation point sine
wave
Agency
Agency File Number
• Surge capability up to
120 A
L Package: E71639
®
• Electrically isolated
“L-Package” is UL
recognized for 2500Vrms
• Requires only a small
gate activation pulse in
each half-cycle
Main Features
• Solid-state switching
eliminates arcing or
Symbol
IT(RMS)
Value
Unit
A
12
VDRM/VRRM
IGT (Q1)
400 to 1000
10 to 50
V
Applications
mA
Excellent for AC switching and phase control applications
such as heating, lighting, and motor speed controls.
Typical applications are AC solid-state switches, light
dimmers, power tools, lawn care equipment, home/brown
goods and white goods appliances.
Schematic Symbol
AlternistorTriacs (no snubber required) are used in
applications with extremely inductive loads requiring
highest commutation performance.
MT2
MT1
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
G
Qxx12xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
99
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
12 Amp Alternistor (High Communitation) Triacs
Absolute Maximum Ratings — Alternistor (3 Quadrants)
Symbol Parameter
IT(RMS) RMS on-state current (full sine wave)
Value
Unit
Qxx12LHy
TC = 90°C
12
A
Qxx12RHy
Qxx12NHy
TC = 105°C
f = 50 Hz
f = 60 Hz
t = 20 ms
t = 16.7 ms
tp = 8.3 ms
TJ = 125°C
110
120
60
Non repetitive surge peak on-state current
ITSM
A
(full cycle, TJ initial = 25°C)
I2t
I2t Value for fusing
A2s
di/dt
Critical rate of rise of on-state current
f = 120 Hz
70
A/μs
tp ≤ 10 μs;
IGTM
Peak gate trigger current
2.0
A
TJ = 125°C
TJ = 125°C
I
GT ≤ IGTM
PG(AV)
Tstg
TJ
Average gate power dissipation
Storage temperature range
0.5
W
°C
°C
-40 to 150
-40 to 125
Operating junction temperature range
Note: xx = voltage, y = sensitivity
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — AlternistorTriac (3 Quadrants)
Symbol
IGT
Test Conditions
VD = 12V RL = 60 Ω
Quadrant
I – II – III
Qxx12xH2
Qxx12xH5
Unit
MAX.
MAX.
MIN.
MAX.
10
50
mA
VGT
VGD
IH
I – II – III
I – II – III
1.3
0.2
15
1.3
0.2
50
V
V
VD = VDRM RL = 3.3 kΩ TJ = 125°C
IT = 100mA
mA
400V
600V
800V
1000V
300
200
150
150
2
750
650
500
300
30
VD = VDRM Gate Open TJ = 125°C
dv/dt
MIN.
V/μs
VD = VDRM Gate Open TJ = 100°C
(di/dt)c = 6.5 A/ms TJ = 125°C
(dv/dt)c
tgt
MIN.
V/μs
μs
IG = 2 x IGT PW = 15μs IT = 17.0 A(pk)
TYP.
4
4
Static Characteristics
Symbol
Test Conditions
Value
1.60
10
Unit
V
VTM
ITM = 17.0A tp = 380 µs
MAX.
MAX.
TJ = 25°C
TJ = 125°C
TJ = 100°C
400-1000V
400-800V
1000V
μA
IDRM
IRRM
VD = VDRM / VRRM
2
mA
3
Thermal Resistances
Symbol
Parameter
Value
Unit
Qxx12RHy
Qxx12NHy
Qxx12LHy
Qxx12RHy
Qxx12LHy
1.2
Junction to case (AC)
°C/W
°C/W
Rθ(J-C)
2.3
45
90
Junction to ambient (AC)
Rθ(J-A)
Note: xx = voltage, y = sensitivity
Qxx12xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
100
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
12 Amp Alternistor (High Communitation) Triacs
Figure 2: Normalized DC GateTrigger Current for
All Quadrants vs. JunctionTemperature
Figure 1: Definition of Quadrants
ALL POLARITIES ARE REFERENCED TO MT1
4.0
MT2 POSITIVE
(Positive Half Cycle)
+
MT2
MT2
3.0
(-)
I
(+)
I
GATE
GT
GT
GATE
MT1
MT1
2.0
1.0
0.0
REF
MT2
REF
MT2
QII QI
QIII QIV
I
-
+ I
GT
GT
(-)
I
(+)
I
GATE
GT
GT
GATE
MT1
REF
MT1
REF
-65
-40
-15
10
35
60
85
110
125
-
Junction Temperature (TJ) - C
MT2 NEGATIVE
(Negative Half Cycle)
Note: Alternistors will not operate in QIV
Figure 3: Normalized DC Holding Current
vs. JunctionTemperature
Figure 4: Normalized DC GateTriggerVoltage for
All Quadrants vs. JunctionTemperature
4.0
3.0
2.0
1.0
0.0
2.0
1.5
1.0
0.5
0.0
+125
+125
-65
-40
-15
10
35
60
85
110
-65
-40
-15
10
35
60
85
110
Junction Temperature (TJ) - ºC
Junction Temperature (TJ) - ºC
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: Maximum Allowable CaseTemperature
vs. On-State Current
130
14
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
Qxx12RH5
Qxx12NH5
12
120
10
8
110
100
Qxx12LH5
6
90
4
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
2
70
60
0
0
2
4
6
8
10
12
14
0
2
4
6
8
10
12
14
RMS On-State Current [IT(RMS)] -- Amps
RMS On-State Current [IT(RMS)] - Amps
Qxx12xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
101
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
12 Amp Alternistor (High Communitation) Triacs
Figure 7: Maximum Allowable AmbientTemperature
vs. On-State Current
Figure 8: On-State Current vs. On-StateVoltage
(Typical)
20
120
110
100
90
CURRENTWAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360
18
TC = 25ºC
16
FREE AIR RATING - No HEAT SINK
14
12
10
8
80
Qxx12LH5
Qxx12RH5
70
60
6
50
4
40
2
30
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
20
0.
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
Positive or Negative Instantaneous On-State Voltage
(VT) - Volts
RMS On-State Current [IT(RMS)] - AMPS
Figure 9: Surge Peak On-State Current vs. Number of Cycles
1000
Supply Frequency: 60Hz Sinusoidal
Load: Resistive
RMS On-State Current [I T(RMS) : Maximum]
Rated Value at Specific Case Temperature
100
10
1
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
1
10
100
1000
Surge Current Duration - Full Cycles
Qxx12xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
102
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
12 Amp Alternistor (High Communitation) Triacs
Soldering Parameters
Reflow Condition
-Temperature Min (Ts(min)
Pb – Free assembly
tP
TP
)
150°C
Ramp-up
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
)
200°C
tL
-Time (min to max) (ts)
60 – 180 secs
Ramp-down
Preheat
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
TS(min)
tS
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
-Temperature (TL) (Liquidus)
Reflow
25
time to peak temperature
-Time (min to max) (ts)
60 – 150 seconds
260+0/5°C
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Environmental Specifications
Test
AC Blocking
Specifications and Conditions
Terminal Finish
Body Material
100% MatteTin-plated
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
UL recognized epoxy meeting flammability
classification 94V-0
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell time
Temperature Cycling
Terminal Material
Copper Alloy
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
Temperature/
Humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Low-Temp Storage
Design Considerations
1008 hours; -40°C
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of theThyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell
time at each temperature; 10 sec (max)
transfer time between temperature
Thermal Shock
Autoclave
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Qxx12xHx Series
©2010 Littelfuse, Inc
103
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
12 Amp Alternistor (High Communitation) Triacs
Dimensions —TO-220AB (R-Package) — Non-Isolated MountingTab Common with Center Lead
TC MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
O
Dimension
8.13
.320
A
Ø
E
Min
Max
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
MT2
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7.01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
F
G
H
J
R
G
L
H
K
K
N
L
J
M
MT1 MT2
GATE
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
R
0.97
1.22
Dimensions —TO-220AB (L-Package) — Isolated MountingTab
TC MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Dimension
O
8.13
.320
Min
Max
Min
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
A
Ø
E
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
B
C
13.36
.526
D
7.01
.276
F
F
G
H
J
R
G
L
H
K
K
N
L
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
J
MT1 MT2
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
GATE
R
0.97
1.22
Qxx12xHx Series
©2010 Littelfuse, Inc
104
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
12 Amp Alternistor (High Communitation) Triacs
Dimensions —TO-263AB (N-Package) — D2Pak Surface Mount
TC MEASURING POINT
AREA: 0.11 IN2
Inches
Millimeters
Min
C
B
V
Dimension
E
MT2
Min
Max
0.370
0.420
0.188
0.035
0.060
0.075
0.105
0.102
0.024
0.110
0.625
0.045
0.010
0.070
Max
9.40
10.67
4.78
0.89
1.52
8.41
.331
A
B
C
D
E
0.360
0.380
0.178
0.025
0.045
0.060
0.095
0.092
0.018
0.090
0.590
0.035
0.002
0.040
9.14
9.65
4.52
0.64
1.14
7.01
.276
A
S
W
U
J
K
GATE
MT1
8.13
.320
G
H
D
F
F
1.52
2.41
2.34
0.46
2.29
14.99
0.89
0.05
1.02
1.91
G
H
J
2.67
2.59
0.61
2.79
15.88
1.14
1168
.460
2.16
.085
7.01
.276
7.01
K
.276
16.89
.665
S
8.89
.350
1.40
.055
V
3.81
.150
U
W
0.25
1.78
2.03
.080
6.60
.260
Product Selector
Voltage
Gate Sensitivity Quadrants
Part Number
Type
Package
400V
600V
800V 1000V
I – II – III
10 mA
10 mA
10 mA
50 mA
50 mA
50 mA
Qxx12LH2
Qxx12RH2
Qxx12NH2
Qxx12LH5
Qxx12RH5
Qxx12NH5
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
AlternistorTriac
TO-220L
TO-220R
TO-263 D²-PAK
TO-220L
X
X
X
X
X
X
TO-220R
TO-263 D²-PAK
Packing Options
Part Number
Qxx12L/RHy
Marking
Qxx12L/RHy
Qxx12L/RHy
Qxx12NHy
Qxx12NHy
Weight
2.2 g
2.2 g
1.6 g
Packing Mode
Bulk
Base Quantity
500
Qxx12L/RHyTP
Qxx12NHyTP
Qxx12NHyRP
Tube Pack
Tube
500 (50 per tube)
500 (50 per tube)
500
1.6 g
Embossed Carrier
Note: xx = Voltage; y = Sensitivity
Qxx12xHx Series
©2010 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
105
Revised:November1, 2010 05:04PM
Teccor® brandThyristors
12 Amp Alternistor (High Communitation) Triacs
TO-263 Embossed Carrier Reel Pack (RP)
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
Gate
MT1
0.059
(1.5)
DIA
0.945
(24.0)
0.827
(21.0)
*
*
Cover tape
MT2
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
Part Numbering System
Q 60 12 L H5 56
Part Marking System
LEAD FORM DIMENSIONS
DEVICE TYPE
Q: Alternistor
xx: Lead Form Option
VOLTAGE RATING
40: 400V
60: 600V
Q6012RH5
SENSITIVITY & TYPE
H2: 10mA (QI, II, III)
H5: 50mA (QI, II, III)
Y
M
®
80: 800V
K0: 1000V
PACKAGE TYPE
CURRENT RATING
12: 12A
L : TO-220 Isolated
R : TO-220 Non-Isolated
N : TO-263 (D2Pak)
Qxx12xHx Series
©2010 Littelfuse, Inc
106
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Revised:November1, 2010 05:04PM
相关型号：
Q6012RH2
Alternistor TRIAC, 600V V(DRM), 12A I(T)RMS, TO-220AB, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
Q6012RH256
Alternistor TRIAC, 600V V(DRM), 12A I(T)RMS, TO-220AB, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
Q6012RH2TP
Alternistor TRIAC, 600V V(DRM), 12A I(T)RMS, TO-220AB, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明