L1N0-6570000000000_技术文档

IllumInatIon

luXEon n

Industry best thermal performance,

2A drive current, compatible with

standard optics, 3-stripe footprint

LUXEON N is a high power LED in a 2.5mm x 2.5mm thermally optimized

package that supports the highest drive current—up to 2A. This high

current capability enables twice the ﬂux in half the size compared to

standard 3535 packages while achieving high eﬃcacy. In addition to

superior performance delivered over the widest operating range,

LUXEON N is compatible with industry standard oﬀ-the-shelf optics,

minimizing design eﬀorts and costs. The thermally optimized package

achieves the lowest thermal resistance at 2°C/W for high drive current

system performance. These advantages provide total system design

ﬂexibility, making LUXEON N the ideal high power emitter choice for the

next generation design of outdoor light sources.

FEaturEs and BEnEFIts

PrImary aPPlIcatIons

Thermally optimized package provides the lowest R_that 2°C/W

Highest drive current of 2A allows 670 lm+ per LED

Low V_fachieves high eﬃcacy of 161 lm/W at 350mA and 110 lm/W at 2000mA

Architectural

High Bay & Low Bay

Outdoor

Radiation pattern compatible with standard 3535 high power packages

– Streetlights

Specialty Lighting

– Torch

and LUXEON TX

2525 package has half the footprint compared to standard 3535 ensuring ﬁt

under oﬀ-the-shelf optics

LM-80 data available at launch

No. E352519

Table of Contents

General Product Information ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 2

Product Test Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Performance Characteristics ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3

Product Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Electrical and Thermal Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Absolute Maximum Ratings ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 4

Characteristic Curves ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 4

Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Forward Current Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Product Bin and Labeling Deﬁnitions ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 8

Decoding Product Bin Labeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Color Bin Deﬁnition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Mechanical Dimensionsꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 10

Reﬂow Soldering Guidelines ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 11

JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Packaging Informationꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 12

Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

i

General Product Information

Product Test Conditions

LUXEON N LEDs are tested and binned with a DC drive current of 700mA at a junction temperature, T_j, of 85°C.

Part Number Nomenclature

Part numbers for LUXEON N follow the convention below:

L 1 N 0 – A A 7 0 0 0 0 0 0 B B B 0

Where:

A A

–

designates nominal ANSI CCT (30=3000K, 40=4000K, 50=5000K, 57=5700K, 65=6500K)

B B B

designates minimum luminous ﬂux level at test conditions (see Product Bin and Labeling section)

Therefore, the following part number is used for a LUXEON N 3000K 70CRI with a minimum luminous ﬂux of 290 lumens:

L 1 N 0 – 3 0 7 0 0 0 0 0 0 2 9 0 0

Lumen Maintenance

Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-

term performance of this product.

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON N is

compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the

RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted

materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated

diphenyl ethers (PBDE).

2

Performance Characteristics

Product Selection Guide

Table 1ꢀ Product performance of LUXEON N at 700mA and 2000mA, T_j=85°Cꢀ

lumInous FluX ^[1](ꢀꢁ)

tyPIcal

lumInous

tyPIcal

lumInous

FluX (ꢀꢁ)

tyPIcal

lumInous

nomInal

cct

mInImum

crI ^{[1, 2]}

Part numBEr

EFFIcacy (ꢀꢁ/W)

mInImum

tyPIcal

700ꢁa

265

2000ꢁa

3000K

4000K

5000K

5700K

70

250

280

135

148

614

671

105

113

L1N0-3070000000000

L1N0-4070000000000

L1N0-5070000000000

L1N0-5770000000000

L1N0-6570000000000

290

6500K

290

Notes for Table 1:

1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous ﬂux measurements.

2. Typical CRI is approximately 2 points higher than the minimum CRI speciﬁed, but this is not guaranteed.

Optical Characteristics

Table 2ꢀ Optical characteristics for LUXEON N at 700mA, T_j=85°Cꢀ

Part numBEr

tyPIcal total IncludEd anglE ^[1]

160°

tyPIcal VIEWIng anglE ^[2]

L1N0-xx7000000xxx0

120°

Notes for Table 2:

1. Total angle at which 90% of total luminous ﬂux is captured.

2. Viewing angle is the oﬀ axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

Electrical and Thermal Characteristics

Table 3ꢀ Electrical and thermal characteristics for LUXEON N at 700mA, T_j=85°Cꢀ

ForWard VoltagE ^[1](V_f)

tyPIcal tEmPEraturE

tyPIcal thErmal

rEsIstancE—JunctIon

to soldEr Pad (°c/W)

Part numBEr

coEFFIcIEnt oF ForWard

VoltagE ^[2](ꢁV/°c)

mInImum

tyPIcal

maXImum

L1N0-xx7000000xxx0

2.5

2.8

3.0

-1.6°

2.0°

Notes for Table 3:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

2. Measured between 25°C and 85°C.

3

Absolute Maximum Ratings

Table 4ꢀ Absolute maximum ratings for LUXEON Nꢀ

ParamEtEr

maXImum PErFormancE

DC Forward Current^{[1, 2]}

Peak Pulsed Forward Current^{[1, 3]}

LED Junction Temperature^[1](DC & Pulse)

ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)

Operating Case Temperature^[1]

LED Storage Temperature

1050mA

1200mA

150°C

1225mA

1750mA

2000mA

2500mA

100°C

135°C

Class 3B

-40°C to 135°C

JEDEC 020c 260°C

3

Soldering Temperature

Allowable Reﬂow Cycles

[4]

Reverse Voltage (V_reverse

)

LUXEON LEDs are not designed to be driven in reverse bias

Notes for Table 4:

1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum

allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding

maximum junction temperature.

3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.

4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse

voltage does not exceed 5V and the reverse current is less than 220uA.

Characteristic Curves

Spectral Power Distribution Characteristics

Figure 1. Typical normalized power vs. wavelength for LUXEON N at 700mA, T_j=85°Cꢀ

4

Light Output Characteristics

Figure 2ꢀ Typical normalized light output vsꢀ junction temperature for LUXEON N at 700mAꢀ

Figure 3. Typical normalized light output vs. forward current for LUXEON N at T_j=85°Cꢀ

5

Forward Current Characteristics

Figure 4. Typical forward current vs. forward voltage for LUXEON N at T_j=85°Cꢀ

Radiation Pattern Characteristics

Figure 5ꢀ Typical radiation pattern for LUXEON N at 700mA, T_j=85°Cꢀ

6

Figure 6ꢀ Typical polar radiation pattern for LUXEON N at 700mA, T_j=85°Cꢀ

7

Product Bin and Labeling Deﬁnitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the

technical datasheet. For this reason, Lumileds bins LED components for luminous ﬂux or radiometric power, color point, peak or

dominant wavelength and forward voltage.

LUXEON N LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:

Where:

A B C D

A

B

C

D

–

designates luminous ﬂux bin (example: U=280 to 290 lumens, V=290 to 300 lumens)

designates correlated color temperature (CCT) bin (1=6500K, 2=5700K, 3=5000K, 5=4000K, 7=3000K)

designates SDCM bin (example: 5=5-step MacAdam ellipse)

designates forward voltage bin (example: X=2.65 to 2.85V, Y=2.85 to 3.00V)

Therefore, a LUXEON N with a lumen range of 290 to 300, SDCM bin of 5, CCT bin of 4000K and a forward voltage range

of 2.65 to 2.85V has the following CAT code:

V 5 5 X

Luminous Flux Bins

Table 5 lists the standard luminous ﬂux bins for LUXEON N emitters. Although several bins are outlined, product availability in a

particular bin varies by production run and by product performance. Not all bins are available in all CCTs.

Table 5. Luminous ﬂux bin deﬁnitions for LUXEON N, T_j=85°Cꢀ

lumInous FluX ^[1](ꢀꢁ)

BIn

mInImum

240

maXImum

250

Q

R

250

260

S

260

270

T

270

280

U

V

280

290

300

W

300

310

Notes for Table 5:

1. Lumileds maintains a tolerance of ±6.5% on luminous ﬂux measurements.

8

Color Bin Deﬁnition

0.430

NOTE: Color bin space illustration for 3000K.

For CCT above 4000K, the ellipse

centers are all above BBL line.

0.425

0.420

Bin 5A

0.415

Bin 5D

0.410

0.405

Bin 5B

Bin 5C

0.400

0.395

0.390

0.445

0.450

0.455

0.460

0.465

0.470

0.475

CIE 1931 x

Figure 7. Color space deﬁnition for LUXEON N.

Figure 8ꢀ 5-step MacAdam ellipse illustration for Table 6ꢀ

Table 6. 5-step MacAdam ellipse color bin deﬁnitions for LUXEON N.

cEntEr PoInt ^[1]

maJor aXIs,

ꢄ

mInor aXIs,

b

EllIPsE rotatIon

nomInal cct

color sPacE

(ꢂx, ꢂꢃ)

anglE, θ

3000K

4000K

5000K

5700K

Single 5-step MacAdam ellipse

(0.4338, 0.4030)

(0.3818, 0.3797)

(0.3447, 0.3553)

(0.3287, 0.3417)

(0.3123, 0.3282)

0.01390

0.01565

0.01370

0.01243

0.01115

0.00680

0.00670

0.00590

0.00533

0.00475

53.2°

53.7°

59.6°

59.1°

58.6°

6500K

Notes for Table 6:

1. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates in the CIE 1931 color space.

Table 7. MacAdam ellipse color bin deﬁnitions for LUXEON N.

BIn

sdcm

5A

5B

5C

5D

5-step MacAdam ellipse

Forward Voltage Bins

Table 8. Forward voltage bin deﬁnitions for LUXEON N, T_j=85°Cꢀ

ForWard VoltagE ^[1](V_f)

BIn

mInImum

maXImum

X

2.65

2.85

3.00

Y

Notes for Table 8:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

9

Mechanical Dimensions

Figure 9ꢀ Mechanical dimensions for LUXEON Nꢀ

Notes for Figure 9:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

10

Reﬂow Soldering Guidelines

t_p

T_p

Critical Zone

_Lto T_p

Ramp-up

T

T_L

t_L

T_smax

T_smin

Ramp-down

t_s

Preheat Area

25

Time 25ºC to Peak

JEDEC J-STD-020D

Time

Figure 10. Visualization of the acceptable reﬂow temperature proﬁle as speciﬁed in Table 9.

Table 9. Reﬂow proﬁle characteristics for LUXEON N.

ProFIlE FEaturE

Preheat Minimum Temperature (T_smin

Preheat Maximum Temperature (T_smax

lEad-FrEE assEmBly

)

150°C

200°C

)

Preheat Time (t_sminto t_smax

)

60 to 180 seconds

3°C / second maximum

217°C

Ramp-Up Rate (T_Lto T_p)

Liquidus Temperature (T_L)

Time Maintained Above Temperature T_L(t_L)

Peak / Classiﬁcation Temperature (T_p)

Time Within 5°C of Actual Temperature (t_p)

Ramp-Down Rate (T_pto T_L)

60 to 150 seconds

260°C

20 to 40 seconds

6°C / second maximum

8 minutes maximum

Time 25°C to Peak Temperature

JEDEC Moisture Sensitivity

Table 10ꢀ Moisture sensitivity levels for LUXEON Nꢀ

Floor lIFE

soak rEquIrEmEnts standard

lEVEl

tImE

condItIons

tImE

condItIons

1

Unlimited

≤30°C / 85% RH

168 Hours +5 / -0

85°C / 85% RH

11

Solder Pad Design

Figure 11ꢀ Recommended PCB solder pad layout for LUXEON Nꢀ

Notes for Figure 11:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Packaging Information

Pocket Tape Dimensions

B

A

B

Cross section view A-A and B-B in

this drawing are not drawn to scale

in order to depict the details clearly

Figure 12ꢀ Pocket tape dimensions for LUXEON Nꢀ

Notes for Figure 12:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

12

Reel Dimensions

Figure 13ꢀ Reel dimensions for LUXEON Nꢀ

Notes for Figure 13:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

13

About Lumileds

Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking

LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.

With a rich history of industry “ﬁrsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by

maintaining an unwavering focus on quality, innovation and reliability.

To learn more about our portfolio of light engines, visit lumileds.com.

Neither Lumileds Holding B.V. nor its aﬃliates shall be liable for any kind of loss of data or

any other damages, direct, indirect or consequential, resulting from the use of the provided

information and data. Although Lumileds Holding B.V. and/or its aﬃliates have attempted to

provide the most accurate information and data, the materials and services information and data

are provided “as is,” and neither Lumileds Holding B.V. nor its aﬃliates warrants or guarantees

the contents and correctness of the provided information and data. Lumileds Holding B.V. and its

aﬃliates reserve the right to make changes without notice. You as user agree to this disclaimer

and user agreement with the download or use of the provided materials, information and data.

LUXEON is a registered trademark of the Lumileds Holding B.V.

in the United States and other countries.

lumileds.com

DS161 LUXEON N

Product Datasheet 20170129


型号：	L1N0-6570000000000
厂家：	LUMILEDS LIGHTING COMPANY
描述：	Industry best thermal performance, 2A drive current, compatible with standard optics, 3-stripe footprint
文件：	总15页 (文件大小：1996K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

L1N0-6570000000000 [LUMILEDS]

相关型号：

L1N4148WT1G

L1N4738_15

L1N5923_15

L1N60A

L1Q0-278000000ZZZ0

L1Q0-308000000ZZZ0

L1Q0-358000000ZZZ0

L1Q0-407000000ZZZ0

L1Q0-507000000ZZZ0

L1Q0-577000000ZZZ0

L1QK50C154MT12

L1QN50C154MT12