HLG-240-42B [MEANWELL]
240W Single Output Switching Power Supply; 240W单路输出开关电源型号: | HLG-240-42B |
厂家: | MEAN WELL ENTERPRISES CO., LTD. |
描述: | 240W Single Output Switching Power Supply |
文件: | 总6页 (文件大小:333K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
240W Single Output Switching Power Supply
HLG-240 series
Features :
Universal AC input / Full range
Built-in active PFC function
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
OCP point adjustable through output cable or internal potential meter
Suitable for LED lighting and moving sign applications
IP67 / IP65 design for indoor or outdoor installations
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet locations
3 years warranty
110
F
SELV
IP65 IP67
HLG-240-12 A Blank : IP67 rated. Cable for I/O connection.
A : IP65 rated. Output voltage and constant current level can be adjusted through internal potential meter.
B : IP67 rated. Constant current level adjustable through output cable.
C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal
potential meter.
SPECIFICATION
HLG-240-36
HLG-240-42
MODEL
HLG-240-12
HLG-240-15
HLG-240-20
HLG-240-24
HLG-240-30
HLG-240-48
HLG-240-54
36V
42V
DC VOLTAGE
12V
15V
20V
24V
30V
48V
54V
18 ~ 36V
6.7A
21 ~ 42V
5.72A
CONSTANT CURRENT REGION Note.4 6 ~12V
7.5 ~ 15V
15A
10 ~ 20V
12A
12 ~ 24V
10A
15 ~ 30V
8A
24 ~ 48V
5A
27 ~ 54V
4.45A
RATED CURRENT
RATED POWER
16A
241.2W
250mVp-p
240.2W
250mVp-p
192W
225W
240W
240W
240W
200mVp-p
240W
250mVp-p
240.3W
350mVp-p
RIPPLE & NOISE (max.) Note.2 150mVp-p
150mVp-p
150mVp-p
150mVp-p
33.5 ~ 38.5V 39 ~ 45V
VOLTAGE ADJ. RANGE Note.6 11.2 ~ 12.8V 14 ~ 16V 18.6 ~ 21.4V 22.4 ~ 25.6V 28 ~ 32V
Can be adjusted by internal potential meter or through output cable
44.8 ~ 51.2V 50 ~ 57V
OUTPUT
CURRENT ADJ. RANGE
8 ~ 16A
VOLTAGE TOLERANCE Note.3 2.5%
3.3 ~ 6.7A
1.0%
2.86 ~ 5.72A
7.5 ~ 15A
2.0%
6 ~ 12A
1.0%
5 ~ 10A
1.0%
4 ~ 8A
1.0%
0.5%
0.5%
2.5 ~ 5A
1.0%
2.23 ~ 4.45A
1.0%
0.5%
0.5%
1.0%
0.5%
0.5%
0.5%
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR
0.5%
2.0%
0.5%
0.5%
0.5%
0.5%
0.5%
1.5%
1.0%
0.5%
0.5%
Note.8 2500ms, 80ms at full load 230VAC /115VAC
15ms at full load 230VAC /115VAC
Note.5 90 ~ 264VAC
127 ~ 373VDC
47 ~ 63Hz
PF 0.95/230VAC
PF 0.98/115VAC at full load and rated output voltage
92% 93%
2A / 230VAC
PF 0.9 at 65 ~ 100% load
INPUT
EFFICIENCY (Typ.)
AC CURRENT
90%
94%
94%
94%
90%
93.5%
93%
4A / 115VAC
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
COLD START 75A/230VAC
<0.75mA / 240VAC
95 ~ 108%
OVER CURRENT
Note.4
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed.
SHORT CIRCUIT
OVER VOLTAGE
32.5 ~ 36.5V 40 ~ 48V
46 ~ 50V
53 ~ 62V
59 ~ 65V
13.5 ~ 16V
Protection type : Shut down and latch off o/p voltage, re-power on to recover
105 (TSW1) 95 (TSW1)
16.5 ~ 19.5V 22 ~ 26V
26 ~ 33V
PROTECTION
5
5
OVER TEMPERATURE
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-30 ~ +60 @ full load ; +70 @ 60% load (Refer to derating curve)
20 ~ 95% RH non-condensing
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-40 ~ +80 , 10 ~ 95% RH
ENVIRONMENT
0.03%/ (0 ~ 50
)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS Note.7
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
UL1012, TUV EN61347-1, EN61347-2-13 independent (except for HLG-240H C type), UL60950-1, UL8750, TUV EN60950-1, IP65 or IP67 approved
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
SAFETY &
EMC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN55022 (CISPR22) Class B
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
EMS IMMUNITY
MTBF
Compliance to EN61000-3-2 Class C ( 50% load) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, heavy industry level (surge 4KV), criteria A
207.9Khrs min. MIL-HDBK-217F (25
)
244.2*68*38.8mm (L*W*H)(HLG-240-Blank/A/B)
251*68*38.8mm (L*W*H)(HLG-240-C)
OTHERS
NOTE
DIMENSION
1.3Kg; 12pcs/16.6Kg/0.74CUFT(HLG-240-Blank/A/B)
1.23Kg; 12pcs/15.8Kg/1.16CUFT(HLG-240-C)
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please
reconfirm special electrical requirements for some specific system design.
5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
6. Type A and type C only.
7. Safety and EMC design refer to EN60598-1, subject 8750(UL), CNS15233, GB7000.1, FCC part18.
8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
240W Single Output Switching Power Supply
HLG-240 series
Mechanical Specification
Case No.954C
Unit:mm
Blank:(HLG-240)
244.2
220.2
12
9.6
300 20
300 20
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
+V(Red)
-V(Black)
SJTW 18AWG(0.75mm2) 3C
SJTW 14AWG(1.5mm2) 2C
4.2 4PL
IP67 rated. Cable for I/O connection.
A Type:(HLG-240-_A)
244.2
220.2
12
9.6
300 20
300 20
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
+V(Red)
-V(Black)
Vo Io
ADJ. ADJ.
SJTW 18AWG(0.75mm2) 3C
SJTW 14AWG(1.5mm2) 2C
4.2 4PL
IP65 rated. Output voltage and constant current level can be adjusted through internal potential meter.
(Can access by removing the rubber stopper on the case.)
File Name:HLG-240-SPEC 2010-06-14
240W Single Output Switching Power Supply
HLG-240 series
B Type:(HLG-240-_B)
244.2
220.2
12
9.6
300 20
300 20
+V(Red)
-V(Black)
SJTW 14AWG(1.5mm2) 2C
ADJ1(Blue)
AC/L(Brown)
AC/N(Blue)
FG (Green/Yellow)
SJTW 18AWG(0.75mm2) 3C
ADJ2(White)
SJTW 18AWG(0.75mm2) 2C
4.2 4PL
IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistor between ADJ1 and ADJ2.
Reference resistance value for output current adjustment (Typical)
Model
Percentage
of rated current
12V
15V
20V
24V
30V
36V
42V
48V
54V
Slightly > 100%
75%
Open Open Open Open Open Open Open Open Open
680
120
560
47
680
91
510
51
820
120
1.8K
500
680
82
620
68
820
150
50%
Slightly < 50%
Short Short Short Short Short Short Short Short Short
C Type:(HLG-240-_C)
251
15.4
8
220.2
AC Input Terminal Pin No.
Assignment
1
2
3
1
2
Pin No. Assignment
I/P
O/P
1
2
3
FG
Vo Io
ADJ. ADJ.
AC/L
AC/N
4.2 4PL
DC Output Terminal Pin No.
Assignment
Pin No. Assignment
1
2
-V
+V
Output voltage and constant current level can be adjusted through internal potential meter.
(Can access by removing the rubber stopper on the case.)
File Name:HLG-240-SPEC 2010-06-14
240W Single Output Switching Power Supply
HLG-240 series
Block Diagram
Fosc : 100KHz
RECTIFIERS
&
FILTER
EMI FILTER
&
RECTIFIERS
POWER
SWITCHING
PFC
+V
-V
I/P
FG
CIRCUIT
ADJ1
ADJ2
O.L.P.
(B Type)
DETECTION
CIRCUIT
O.L.P.
PWM & PFC
CONTROL
PFC
CONTROL
O.V.P.
Derating Curve
Static Characteristics
fosc : 100KHz
100
90
80
70
60
50
40
230VAC
100
80
100VAC
60
40
20
(HORIZONTAL)
-30
-25
-10
0
15
30
50
60
70
90 100 125 135 145 155 165 175 180 200 230 264
AMBIENT TEMPERATURE (
)
INPUT VOLTAGE (V) 60Hz
Power Factor Characteristic
Power factor will be higher than 0.9 when output loading is 65% or higher.
Constant Current Mode
1 .0 2
1
0 .9 8
0 .9 6
0 .9 4
0 .9 2
0 .9
110V
230V
0 .8 8
0 .8 6
0 .8 4
0 .8 2
0 .8
3 0 %
4 0 %
5 0 %
6 0 %
7 0 %
8 0 %
9 0 %
1 0 0 %
LOAD
EFFICIENCY vs LOAD (48V Model)
HLG-240 series possess superior working efficiency that up to 94% can be reached in field applications.
96
94
92
90
88
86
110V
230V
84
82
80
78
76
0%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
File Name:HLG-240-SPEC 2010-06-14
240W Single Output Switching Power Supply
HLG-240 series
DRIVING METHODS OF LED MODULE
There are two major kinds of LED drive method "direct drive" and "with LED driver".
A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs.
Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B).
(B)
100
Constant
Current area
(A) Constant
Voltage area
50
(max.)
(C)
Hiccup
Protection
50
95
Io (%)
Typical LED power supply I-V curve
Direct driving :
Under direct driving, the power supply will work in "constant current mode (CC)" and output voltage of the power supply will be clamped by sum of
forward voltage (VF) of the LED strip.
The total forward voltage of series connecting LEDs is suggested for 75%~95% of power supply rated output voltage due to concern of the best PF
value and efficiency.
AC
source
I/P
HLG-240
O/P
With LED driver
Using additional driver, the power supply will work in "constant voltage mode (CV)" and output voltage of the power supply will be kept in rated value.
In this drive mode, several design issues need to be considered:
1.Output voltage of PSU must be higher than total forward voltage of series connecting LEDs by 3V minimum.
2.Input capacitor (Cin) of LED driver circuit should use 2.2uF ~ 22uF(typ.) of rating depends on the operating frequency of the LED driver.
The higher the operating frequency is used, the smaller value of Cin should be chosen, and vice versa.
AC
source
R
I/P
O/P
HLG-240
VF
Cin
Cout
L
IC Circuit
File Name:HLG-240-SPEC 2010-06-14
240W Single Output Switching Power Supply
HLG-240 series
EMI DEBUG SUGGESTION
Chassis of LED Lamp
C
LED CC driver
AC
source
CC
IC
I/P
O/P
HLG-240
FG
B
A
D
A
A. Add a common mode ferrite choke on output wires to reduce the common emission between 10M ~ 300MHz per lighting EMI regulation.
B. Chassis of LED lamp and chassis of HLG-240 or the FG wire should be connected to the safety ground to reduce the EMI noise, including the conduction
and radiation emission.
C. The additional X-Cap and discharge resistor can reduce the low frequency conduction noise between 9K ~ 1MHz per lighting EMI regulation.
D. L-C filter should be added at the DC input of LED constant current driver to avoid the differential emission and high frequency noise generated by the
CC driver.
WATERPROOF CONNECTION
Waterproof connector
Waterproof connector can be assembled on the output cable of HLG-240 to operate in wet/damp or outdoor environment.
AC
HLG-240
source
I/P
O/P
Size
M12
Pin Configuration (Female)
Size
Pin Configuration (Female)
M15
4-PIN
5A/PIN
5-PIN
5A/PIN
2-PIN
12A/PIN
M15-02
12A max.
Order No.
M12-04
10A max.
M12-05
10A max.
Order No.
LED Lamp
Suitable Current
Suitable Current
Cable Joiner
66
26
Suitable for 14AWG~22AWG
20
Up to four wires can be connected through this cable joiner by
soldering or clamping by tools.
LED Lamp
HLG-240
O/P Wires
File Name:HLG-240-SPEC 2010-06-14
相关型号:
©2020 ICPDF网 联系我们和版权申明