IDPV-25-48 [MEANWELL]
25W PWM Output LED Driver;型号: | IDPV-25-48 |
厂家: | MEAN WELL ENTERPRISES CO., LTD. |
描述: | 25W PWM Output LED Driver |
文件: | 总6页 (文件大小:140K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
25W PWM Output LED Driver
IDPV-25 series
S&
E
SELV
■ Features
■ Applications
ꢀIndoor LED lighting
ꢀLED strip lighting
ꢀConstant Voltage PWM style output
with frequency1KHz
ꢀLED lighting decorative
ꢀIndoor LED lighting
ꢀLED architecture lighting
ꢀLED decorative lighting
ꢀMoving sign
ꢀPCB type design
ꢀBuilt-in active PFC function
ꢀNo load power consumption<0.5W(Blank-Type)
ꢀFunction options: 2 in 1 dimming (dim-to-off);
AuxiliaryDC output
ꢀLED architecture lighting
ꢀTunnel lighting
ꢀ3 years warranty
■ Description
IDPV-25 series is a 25W PCB type AC/DC LED driver featuring the constant voltage mode PWM style
output design. IDPV-25 operates from 90~295VAC and offers models with different rated voltage
ranging between 12V and 60V. Thanks to the high efficiencyup to 84%, with the fanless design,
the entire series is able to operate for -20℃~+45℃ ambient temperature under free air convection.
IDPV-25 is equipped with various function options, such as dimming methodologies, so as to provide
the design flexibilityfor LED lighting system.
■ Model Encoding
-
25
- 12
A
IDPV
Rated output voltage(12/24/36/48/60V)
Function options
Rated wattage
Series name
Type
Function
2 in 1 dimming (0~10VDC and 10V PWM)
2 in 1 dimming and AuxiliaryDC output
Note
Blank
In Stock
In Stock
A
File Name:IDPV-25-SPEC 2018-03-15
25W PWM Output LED Driver
IDPV-25 series
SPECIFICATION
MODEL
IDPV-25 -12
IDPV-25 -24
IDPV-25 -36
36V
IDPV-25 -48
IDPV-25 -60
DC VOLTAGE
12V
24V
48V
60V
0.7A
CONSTANT CURRENT REGION 1.8A
0.52A
24.96W
0.42A
25.2W
1.05A
25.2W
25.2W
21.6W
RATED POWER
0~100%
DIMMING RANGE
OUTPUT
VOLTAGE TOLERANCE
PWM FREQUENCY (Typ.)
SETUP TIME Note.3
AUXILIARY DC OUTPUT Note.4
10%
1KHz ( 20%)
500ms / 230VAC 1200ms/115VAC
Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only
90 ~ 295VAC 127 ~ 417VDC
VOLTAGE RANGE Note.2
FREQUENCY RANGE
POWER FACTOR (Typ.)
(Please refer to "STATIC CHARACTERISTIC" section)
47 ~ 63Hz
PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
THD< 20%(@load≧70%/115VAC,230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION” section)
INPUT
TOTAL HARMONIC DISTORTION
83%
84%
EFFICIENCY (Typ.)
80%
82%
81%
AC CURRENT (Typ.)
INRUSH CURRENT(Typ.)
0.4A / 115VAC
0.16A / 230VAC
0.13A / 277VAC
COLD START 30A(twidth=150μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
<0.75mA / 277VAC
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
LEAKAGE CURRENT
<0.5W for Blank-Type, <1.2W for A-Type
NO LOAD POWER CONSUMPTION
Shut down output voltage, re-power on to recover
SHORT CIRCUIT
105 ~ 120%
PROTECTION
ENVIRONMENT
OVER CURRENT
Protection type : Constant current limiting, recovers automatically after fault condition is removed
WORKING TEMP.
Ta=-20 ~ +45℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
20 ~ 90% RH non-condensing
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-40 ~ +80℃, 10 ~ 95% RH
0.03%/℃ (0 ~ 45℃)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL8750,CSA C22.2 NO.250.13-12;ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14 approved
I/P-O/P:3.75KVAC
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY &
EMC
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55015, EN61000-3-2 Class C (@load≧70%) ; EN61000-3-3,GB17743,GB17625.1
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV)
382.7Khrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION
PACKING
114.5*72.5*20mm (L*W*H)
0.145Kg;72pcs/11.44Kg/1.13CUFT
1. All parameters NOT speciallymentioned are measured at 230VAC input, rated current and 25 ℃of ambient temperature.
2. De-rating maybe needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details.
NOTE
3. Length of set up time is measured at cold first start. Turning ON/OFF the driver maylead to increase of the set up time.
4. Aux. 12V will be damaged with short circuit; It will not be available with dimming off or output no load condition.
5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be
affected bythe complete installation, the final equipment manufacturers must re-qualifyEMC Directive on the complete installation again.
6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
7. When the environment temperature is high, adding a heat sink at the bottom of the product can help cooling.
The Part No of the heat sink is 1GG1HS-GZ236A.
File Name:IDPV-25-SPEC 2018-03-15
25W PWM Output LED Driver
IDPV-25 series
DIMMING OPERATION
-
+
AC/L
AC/L
AC/N
AC/N
TB1
DIM-
DIM+
TB2
Vo-
Vo+
+
+
※ Dimming principle for PWM style output
ꢀDimming is achieved by varying the duty cycle of the output current.
ON
Output DC current
TON
Duty cycle(%) =
×100%
T
Output PWM frequency : 1KHz ( 20%)
OFF
Io=0A
TON
T
※ 2 in 1 dimming function
◎ Applying additive 0 ~ 10VDC
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
+
+
Vo+
-
-
Vo-
DIM+
+
Additive Voltage
-
DIM-
0%
“DO NOT connect "DIM- to Vo-”
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
◎ Applying additive 10V PWM signal (frequency range 300~3KHz):
+
+
Vo+
-
-
Vo-
DIM+
Additive PWM signal
DIM-
0%
“DO NOT connect "DIM- to Vo-”
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Duty cycle of additive 10V PWM signal dimming input
Note : 1. Min. duty cycle of output current is about 9% and the output current is not defined when 0%< Iout<9%.
2. The duty cycle of output current could drop down to 0% when dimming input is about 0Vdc, or 10V PWM signal with 0% duty cycle.
File Name:IDPV-25-SPEC 2018-03-15
25W PWM Output LED Driver
IDPV-25 series
OUTPUT LOAD vs TEMPERATURE
100
80
60
40
for 12V only
20
(HORIZONTAL)
-20
-10
0
5
15
25
35 40 45
AMBIENT TEMPERATURE,Ta (℃)
STATIC CHARACTERISTIC
POWER FACTOR (PF) CHARACTERISTIC
1
0.98
0.96
0.94
0.92
0.9
100
90
80
70
60
50
40
277V
230V
115V
0.88
70%
80%
90%
100%
90
100
295
135
180 200
INPUT VOLTAGE (V)
LOAD
※De-rating is needed under low input voltage.
TOTAL HARMONIC DISTORTION (THD)
EFFICIENCY vs LOAD
IDPV-25 series possess superior working efficiency that up to 84% can
be reached in field applications.
※ 36V Model
※ 36V Model
17%
86
85
84
15%
13%
11%
9%
277VAC
230VAC
115VAC
83
277V
230V
115V
82
81
7%
80
79
78
5%
3%
70%
80%
90%
100%
70%
80%
90%
100%
LOAD
LOAD
File Name:IDPV-25-SPEC 2018-03-15
25W PWM Output LED Driver
IDPV-25 series
BLOCK DIAGRAM
fosc : 70KHz
AUX+(for A-Type)
AUX-(for A-Type)
RECTIFIERS
RECTIFIERS
&
FILTER
EMI FILTER
&
RECTIFIERS
POWER
SWITCHING
Vo+
Vo-
I/P
CURRENT
LIMIT
DIM+
DIM-
O.L.P.
DETECTION
CIRCUIT
PWM&PFC
CONTROL
MECHANICAL SPECIFICATION
Unit:mm
※ Blank-Type
114.5
106.5
4
-
+
AC/L
TB1
AC/L
AC/N
AC/N
DIM-
DIM+
TB2
Vo-
Vo+
+
+
NOTE: Please use wires with a cross section of 0.75~1.5mm2 for TB1
and wires with a cross section of 0.5~1.5mm2 for TB2.
Terminal Pin No. Assignment(TB2)
Terminal Pin No. Assignment(TB1)
Pin No.
Assignment
ACL
Pin No.
Assignment
DIM-
1
2
3
4
1
2
3
4
ACL
DIM+
Vo-
ACN
ACN
Vo+
File Name:IDPV-25-SPEC 2018-03-15
25W PWM Output LED Driver
IDPV-25 series
※ A-Type
114.5
106.5
4
-
+
AC/L
AC/L
AC/N
AC/N
TB1
DIM-
TB2
DIM+
Aux-
Aux+
Vo-
Vo+
+
+
NOTE: Please use wires with a cross section of 0.75~1.5mm2 for TB1
and wires with a cross section of 0.5~1.5mm2 for TB2.
Terminal Pin No. Assignment(TB1)
Terminal Pin No. Assignment(TB2)
Pin No.
Assignment
Pin No.
Assignment
DIM-
Pin No.
Assignment
AUX+
Vo-
1
2
3
4
ACL
ACL
ACN
ACN
1
2
3
4
5
6
DIM+
AUX-
Vo+
INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html
File Name:IDPV-25-SPEC 2018-03-15
相关型号:
©2020 ICPDF网 联系我们和版权申明