XP1043-QH-0G00 [MIMIX]
12.0-16.0 GHz Power Amplifier QFN, 4x4mm; 12.0-16.0 GHz功率放大器QFN封装，采用4x4mm
| 型号： | XP1043-QH-0G00 |
| 厂家： | 
MIMIX BROADBAND |
| 描述： | 12.0-16.0 GHz Power Amplifier QFN, 4x4mm |
| 文件： | 总5页 (文件大小：366K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
12.0-16.0 GHz Power Amplifier
QFN, 4x4mm
February 2008 - Rev 06-Feb-08
P1043-QH
Features
32 dBm Saturated RF Power
41 dBm Output IP3 Linearity
17 dB Gain Control
On-Chip Power Detector
4x4mm Standard QFN Package
100% RF Testing
General Description
The XP1043-QH is a packaged linear power amplifier
that operates over the 12.0-16.0 GHz frequency band.
The device provides 20 dB gain and 41 dBm Output
Third Order Intercept Point (OIP3) across the band and
is offered in an industry standard, fully molded 4x4mm
QFN package. The packaged amplifier is comprised of
a three stage power amplifier with an integrated,
temperature compensated on-chip power detector.
The device includes on-chip ESD protection structures
and DC by-pass capacitors to ease the implementation
and volume assembly of the packaged part. The
device is manufactured in 0.5um GaAs PHEMT device
technology with BCB wafer coating to enhance
ruggedness and repeatability of performance.
XP1043-QH is well suited for Point-to-Point Radio,
LMDS, SATCOM and VSAT applications.
Absolute Maximum Ratings1
Supply Voltage (Vd1,2,3)
Supply Current (Id1,2,3)
+10.0V
1500 mA
Gate Bias Voltage (Vg1,2,3) -3V
Max Power Dissipation (Pdiss) 8.0W
RF Input Power
+19 dBm
Operating Temperature (Ta) -55 to +85 ºC
Storage Temperature (Tstg) -65 to +150 ºC
Channel Temperature (Tch) -40 to MTTF Graph2
(1) Operation of this device above any one of these parameters
may cause permanent damage.
(2) Channel temperature directly affects a device’s MTTF.
Channel temperature should be kept as low as possible to
maximize lifetime.
Electrical Characteristics (AmbientTemperatureT = 25 oC)
Parameter
Frequency Range (f)
Units
GHz
dB
dB
dB
Min.
12.0
Typ.
-
Max.
16.0
Small Signal Gain (S21)
Input Return Loss (S11)
Output Return Loss (S22)
Reverse Isolation (S12)
P1dB
20.0
15.0
10.0
55.0
30.0
32.0
41.0
7.0
dB
dBm
dBm
dBm
VDC
VDC
VDC
mA
Psat
OIP3
Drain Bias Voltage (Vd1,2,3)
Detector Bias Voltage (Vdet,ref)
Gate Bias Voltage (Vg1,2,3)
Supply Current (Id1)
Supply Current (Id2)
Supply Current (Id3)
5.0
-2
-1.0
100
200
400
mA
mA
Page 1 of 5
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
12.0-16.0 GHz Power Amplifier
QFN, 4x4mm
February 2008 - Rev 06-Feb-08
P1043-QH
Power Amplifier Measurements
XP1043-QH: Pout (dBm) vs Pin (dBm) at Room Temp.
Vd = 7 V, Iq = 700mA
XP1043-QH: S-Parameters at Room Temp.
Vd=7 V, Id1=60 mA, Id2=120 mA, Id3=240 mA
34
32
30
28
26
24
22
20
18
16
14
12
10
24
20
S
16
21
12
8
4
0
S
22
Pout, Freq = 12.5 GHz
Pout, Freq = 13.0 GHz
Pout, Freq = 13.5 GHz
Pout, Freq = 14.0 GHz
Pout, Freq = 14.5 GHz
Pout, Freq = 15.0 GHz
Pout, Freq = 15.5 GHz
-4
-8
S
11
-12
-16
-20
-24
11
11.5
12
12.5
13
13.5
14
14.5
15
15.5
16
16.5
17
Frequency (GHz)
-10 -8 -6 -4 -2
0
2
4
6
8
10 12 14 16 18 20 22
Input Power (dBm)
XP1043-QH: V_Detect vs Output Power, 12-16 GHz
T=25°C (green) and +80°C (red)
XP1043-QH: Pout (dBm) vs Pin (dBm) at +85 °C.
Vd = 7 V, Iq = 700mA
10000
1000
100
10
34
32
30
28
26
24
22
20
18
16
14
12
10
Pout, Freq = 12.5 GHz
Pout, Freq = 13.0 GHz
Pout, Freq = 13.5 GHz
Pout, Freq = 14.0 GHz
Pout, Freq = 14.5 GHz
Pout, Freq = 15.0 GHz
Pout, Freq = 15.5 GHz
1
-10 -8 -6 -4 -2
0
2
4
6
8
10 12 14 16 18 20 22
-5
0
5
10
15
20
25
30
35
Input Power (dBm)
Output Power (dBm)
XP1043-QH: C/I3 (dBc) vs Pout per Tone (dBm) at Room Temp.
Vd=7 V, Id=700 mA. 12.5 to 15.5 GHz
XP1043-QH: C/I3 (dBc) vs Pout per Tone (dBm) at at +85 °C.
Vd=7 V, Id=700 mA. 12.5 to 15.5 GHz
65
60
55
50
45
40
35
30
25
20
15
10
5
60
55
50
45
40
35
30
25
20
15
10
5
CI3, Freq = 12.5 GHz, Temp = 85 C
CI3, Freq = 13.5 GHz, Temp = 85 C
CI3, Freq = 14.5 GHz, Temp = 85 C
CI3, Freq = 15.5 GHz, Temp = 85 c
CI3, Freq = 12.5 GHz, Temp = 35 C
CI3, Freq = 13.5 GHz, Temp = 35 C
CI3, Freq = 14.5 GHz, Temp = 35 C
CI3, Freq = 15.5 GHz, Temp = 35 C
0
0
14
15
16
17
18
19
20
21
22
14
15
16
17
18
19
20
21
22
Output Power (dBm per tone)
Output Power (dBm per tone)
Page 2 of 5
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
12.0-16.0 GHz Power Amplifier
QFN, 4x4mm
February 2008 - Rev 06-Feb-08
P1043-QH
Package Dimensions / Layout
Functional Schematic
GND GND GND VD1 VD2 VD3
Pin Designations
Pin Number Pin Name Pin Function Nominal Value
1-3
4
5-6
7
8
9
10
11
12
13-14
15
16-18
19
20
21
22-24
GND
RF In
GND
VG1
VG2
VG3
GND
Vdet
Ground
RF Input
Ground
Gate 1 Bias
Gate 2 Bias
Gate 3 Bias
Ground
1
2
3
4
5
6
18
17
16
15
14
13
GND
GND
GND
RF IN
GND
GND
GND
GND
GND
RF OUT
GND
GND
~ -1.0V
~ -1.0V
~ -1.0V
Pwr Det
5.0V
5.0V
Vref Pwr Det Reference
GND
RF Out
GND
VD3
VD2
VD1
Ground
RF Output
Ground
Drain 3 Bias
Drain 2 Bias
Drain 1 Bias
Ground
7.0V, 400 mA
7.0V, 200 mA
7.0V, 100 mA
GND
VG1 VG2 VG3 GND Vdet Vref
Page 3 of 5
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
12.0-16.0 GHz Power Amplifier
QFN, 4x4mm
February 2008 - Rev 06-Feb-08
P1043-QH
App Note [1] Biasing - As shown in the Pin Designations table, the device is operated by biasing VD1,2,3 at 7.0V with 100, 200, 400mA respectively.
It is recommended to use active bias to keep the currents constant in order to maintain the best performance over temperature. Depending on the
supply voltage available and the power dissipation constraints, the bias circuit may be a single transistor or a low power operational amplifier, with
a low value resistor in series with the drain supply used to sense the current.The gate of the pHEMT is controlled to maintain correct drain current
and thus drain voltage.The typical gate voltage needed to do this is -1.0V. Make sure to sequence the applied voltage to ensure negative gate bias
is available before applying the positive drain supply.
App Note [2] Board Layout - As shown in the board layout, it is recommended to provide 100pF decoupling caps as close to the bias pins as
possible, with additional 10µF decoupling caps.
Recommended Layout
Recommended Decoupling Capacitors: 100pF 0402, 10µF 0805
Page 4 of 5
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
12.0-16.0 GHz Power Amplifier
QFN, 4x4mm
February 2008 - Rev 06-Feb-08
P1043-QH
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the
environment. For safety, observe the following procedures:
• Do not ingest.
• Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these
by-products are dangerous to the human body if inhaled, ingested, or swallowed.
• Observe government laws and company regulations when discarding this product.This product must be discarded in
accordance with methods specified by applicable hazardous waste procedures.
Electrostatic Sensitive Device -
Observe all necessary precautions when handling.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or
systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life
support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain
life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or
system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its
safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible
with high volume solder installation. Vacuum tools or other suitable pick and place equipment may be used to pick and place this
part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground
connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and
life of the product due to thermal stress.
Typical Reflow Profiles
Reflow Profile
SnPb
Pb Free
Ramp Up Rate
3-4 ºC/sec
60-120 sec @ 140-160 ºC
60-150 sec
240 ºC
3-4 ºC/sec
Activation Time and Temperature
Time Above Melting Point
Max Peak Temperature
Time Within 5 ºC of Peak
Ramp Down Rate
60-180 sec @ 170-200 ºC
60-150 sec
265 ºC
10-20 sec
10-20 sec
4-6 ºC/sec
4-6 ºC/sec
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant
components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is
100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as
well as higher temperature (260°C reflow) “Pb Free” processes.
Ordering Information
Part Number for Ordering
XP1043-QH-0G00
Description
Matte Tin plated RoHS compliant 4x4 24L QFN surface mount package in bulk quantity
Matte Tin plated RoHS compliant 4x4 24L QFN surface mount package in tape and reel
XP1043-QH evaluation board
XP1043-QH-0G0T
XP1043-QH-EV1
Caution: ESD Sensitive
Appropriate precautions in handling, packaging
and testing devices must be observed.
Proper ESD procedures should be followed when handling this device.
Page 5 of 5
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
相关型号：
XP1048-QJ-0G00
Narrow Band High Power Amplifier, 3300MHz Min, 3800MHz Max, 6 X 6 MM, ROHS COMPLIANT, PLASTIC, QFN-24
MIMIX
©2020 ICPDF网 联系我们和版权申明