XP1076-SD-0G0T [MIMIX]
Amplifier,;
| 型号： | XP1076-SD-0G0T |
| 厂家： | 
MIMIX BROADBAND |
| 描述： | Amplifier, 射频 微波 |
| 文件： | 总14页 (文件大小：1499K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Features
31.5 dBm P1dB
46.5 dBm OIP3
Active Bias Circuit
14.5 dB Gain @ 2GHz
5V Single Positive Voltage Supply
RoHS Compliant SOIC-8
General Description
The XP1076-SD is a high linearity power amplifier capable of 31.5 dBm
of 1-dB compressed power and 46.5 dBm of OIP3.This device has an
integrated active bias circuit and can be externally optimized to
achieve 14.5 dB of gain at 2 GHz.The XP1076-SD is housed in an RoHS
compliant SOIC-8 power package and has a low thermal resistance of
13.5 ºC/W. All devices are 100% RF and DC tested.The XP1076-SD is
specifically designed to be used as a linear driver amplifier or as an
output stage amplifier for wireless infrastructure equipment.
Typical Performance
Parameter
Absolute Maximum Ratings
TYP
TYP
TYP
Units
Supply Voltage
+5.5 V
RF Input Power
+23 dBm
-55 ºC to +150 ºC
175 ºC
Frequency (F)
877
17.5
45.5
31.0
485
1960
14.5
46.5
31.5
485
2140
13.0
46.5
31.5
470
MHz
dB
Storage Temperature (Tstg)
Junction Temperature
Operating Temperature
Power Dissipation (PDC)
Current (Icc)
Gain (S21)
Output IP3* (OIP3)
Output P1dB
dBm
dBm
mA
dBm
dB
-40 ºC to +85 ºC
5.0W
Quiescent Current (Icq)
Output Power @ ACPR = -45dBc * *
Input Return Loss (S11)
Output Return Loss (S22)
Noise Figure (NF)
0.9A
25.5
-10.0
-12.5
8.5
26.0
-19.0
-19.0
5.0
23.0
-13.5
-11.0
6.0
ESD (HBM)
TBD
Moisture Sensitivity Level (MSL)
Thermal Resistance
TBD
dB
13.5 ºC/W
dB
Operation of this device above any of these parameters may cause damage.
Data measured in Mimix evaluation board with the proper matching elements
*OIP3 is measured with Pout = 12 dBm/tone, 1 MHz spacing
**@ 2140 MHz,WCDMA,TM-1, 64 DPCH
@ 877 & 1960, IS-95, 9 forward channels
Electrical Characteristics (T = 25ºC,Vcc = 5V)
Unless otherwise specified, the following specifications are guaranteed at room temerpature in a Mimix fixture.
Parameter
Frequency Range (f)
Test Frequency
Small Signal Gain (S21)
Input Return Loss (S11)
Output Return Loss (S22)
Output Intercept Point (OIP3)
Output P1dB
Condition
Units
MHz
MHz
dB
dB
dB
dBm
dBm
mA
V
Min.
700
Typ.
2140
2140
13.0
-13.5
-11.0
+46.5
+31.5
470
Max.
2300
Externally Matched
Externally Matched
Externally Matched
29.0
Quiescent Current (Icq)
Supply Voltage
540
5.0
OIP3 is measured with Pout = 12 dBm/tone, 1 MHz spacing
Page 1 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Typical S-Parameters
S22
S11
Swp Max
3 GHz
Swp Max
3 GHz
2.0 GHz
1.6 GHz
2.0 GHz
1.6 GHz
0.9 GHz
0.9 GHz
0.5 GHz
0.5 GHz
Swp Min
0.5 GHz
Swp Min
0.5 GHz
S12
S21
-10
-12
-14
-16
-18
-20
-22
-24
-26
-28
-30
-32
-34
-36
-38
-40
-42
-44
-46
-48
-50
-52
-54
-56
-58
-60
32
30
28
26
24
22
20
18
16
14
12
10
8
DB(|S(2,1)|)
DB(GMax())
6
4
2
0
0
0.25 0.5 0.75
1
1.25 1.5 1.75
2
2.25 2.5 2.75
3
0
0.25 0.5 0.75
1
1.25 1.5 1.75
2
2.25 2.5 2.75
3
Frequency (GHz)
Frequency (GHz)
Page 2 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Evaluation Board Schematic: 877 MHz
Port
VCC
R
R3
C
C7
C
C4
R
R5
C
C3
C
C2
C
C6
L
L1
1
2
3
4
8
7
6
5
XP1076
SOIC-8
C
C11
C
C1
TLIN
C
C12
Port
RFOUT
C
C10
C
C9
L
L2
TL1
Port
RFIN
C
C8
Z=50.0 Ohm
R
R2
sch_SOIC8
X1
ComponentValues: 877 MHz
Ref Designator
L1
Desription
15 nH 0603 Inductor
8.2 pF 0402 Capacitor
10 pF 0402 Capacitor
100 pF 0402 Capacitor
10 nF 0603 Capacitor
Mfg
QTY
Murata
Murata
Murata
Murata
Murata
1
1
1
1
3
1
2
1
1
3
1
1
1
1
C1
C2
C3
C4,C6,C7
C5
100 uF Tantalum Capacitor AVX
C11,C12
C10
L2
33 pF 0402 Capacitor
10 pF 0402 Capacitor
2.5 nH 0402 Inductor
0ohm 0402 Resistor
20ohm 0402 Resistor
56 pF 0402 Capacitor
27 pF 0402 Capacitor
75 ohm 0805 Resistor
Murata
Murata
Murata
R1,R3, R4
R2
C8
Murata
Murata
C9
R5
Page 3 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Evaluation Board Layout: 877 MHz
Vcc
RFin
RFout
Typical Performance: 877 MHz
XP1076-SD, S21, 5V, 485mA
XP1076-SD: S11, 5V, 485mA
22
20
18
16
14
12
10
8
0
-5
-10
-15
-20
-25
-30
25°C
-40°C
85°C
-40°C
+25°C
+85°C
6
4
2
0
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
Freq (GHz)
Freq (GHz)
XP1076-SD: S22, 5V, 485mA
XP1076-SD: P1dB, 5V, 485mA
0
-5
33
32
31
30
29
28
27
26
25
24
23
22
21
20
-10
-15
-20
-25
-30
-40°C
-40°C
+25°C
+85°C
+25°C
+85°C
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960
Freq (GHz)
Freq (MHz)
Page 4 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Typical Performance: 877 MHz (cont.)
XP1076-SD, OIP3 vs. Frequency vs. Temp, 5V, 485mA
XP1076-SD,OIP3vs.Poutvs. Frequency,5V,485mA
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
48
47
46
45
44
43
42
41
40
39
38
37
36
-40°C
+25°C
+85°C
810MHz
877MHz
944MHz
800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960
8
10
12
14
16
18
20
22
24
26
28
Freqeuncy (MHz)
Pout (dBm)
XP1076-SD, ACPR vs. Frequency, 5V, 485mA
XP1076-SD, ACPR vs. Pout vs. Temp, 5V, 485mA, 877 MHz
-40
-45
-50
-55
-60
-65
-70
-75
-80
-30
-35
-40
-45
-50
-55
-60
-65
-70
-75
-80
IS-95, 9 forward channels, 885 kHz offset
IS-95, 9 forward channels, 885 kHz offset
-40°C
+25°C
+85°C
810MHz
877MHz
944MHz
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
Pout (dBm)
Pout (dBm)
XP1076-SD, NF, 5V, 485mA
15.0
14.0
13.0
12.0
11.0
10.0
9.0
8.0
7.0
6.0
5.0
800
820
840
860
880
900
920
940
960
980
1000
Freq (MHz)
Page 5 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Port
VCC
Evaluation Board Schematic: 1960 MHz
R
R3
C
C7
C
C4
R
R6
C
C3
C
C2
L
L1
1
2
8
7
XP1076
SOIC-8
C
C
C6
C
C1
3
4
6
5
C11
TLIN
C
C12
Port
RFOUT
C
C
C9
R
TL1
Port
TLIN
C
C8
C10
R5
Z=50.0 Ohm
RFIN
TL2
R
R2
Z=50.0 Ohm
sch_SOIC8
X1
ComponentValues: 1960 MHz
Ref Designator
Part Identifier/Drawing Ref
15 nH 0603 Inductor
4.3 pF 0402 Capacitor
10 pF 0402 Capacitor
100 pF 0402 Capacitor
10 nF 0603 Capacitor
100 uF Tantalum Capacitor
33 pF 0402 Capacitor
2.7 pF 0402 Capacitor
1.0 pF 0402 Capacitor
0ohm 0402 Resistor
Mfg
Murata
Murata
Murata
Murata
Murata
AVX
QTY
L1
1
1
1
1
2
1
2
1
1
4
1
1
1
1
C1
C2
C3
C4,C7
C5
C11,C12
Murata
Murata
Murata
C10
C6
R1, R3, R4, R5
R2
C8
C9
R6
20ohm 0402 Resistor
3.6 pF 0402 Capacitor
6.05 pF 0402 Capacitor
75 ohm 0805 Resistor
Murata
Murata
Page 6 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Evaluation Board Layout: 1960 MHz
Vcc
RFin
RFout
Typical Performance: 1960 MHz
XP1076-SD, S21, 5V, 485mA
XP1076-SD, S11, 5V, 485mA
0
-5
22
20
18
16
14
12
10
8
25°C
-40°C
85°C
-10
-15
-20
-25
-30
-40°C
+25°C
+85°C
6
4
2
0
1.75
1.80
1.85
1.90
1.95
2.00
2.05
2.10
2.15
2.20
1.75
1.80
1.85
1.90
1.95
2.00
2.05
2.10
2.15
2.20
Freq (GHz)
Freq (GHz)
XP1076-SD, S22, 5V, 485mA
XP1076-SD, P1dB, 5V, 485mA
0
-5
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
-10
-15
-20
-25
-30
-40°C
+25°C
+85°C
-40°C
+25°C
+85°C
1.75
1.80
1.85
1.90
1.95
2.00
2.05
2.10
2.15
2.20
1920
1930
1940
1950
1960
1970
1980
1990
2000
Freq (GHz)
Freq (MHz)
Page 7 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Typical Performance: 1960 MHz (cont.)
XP1076-SD, OIP3 vs. Frequency vs. Temp, 5V, 485mA
XP1076-SD, OIP3 vs. Pout vs. Frequency, 5V, 485mA
50
49
48
47
46
45
44
43
42
41
40
39
38
48
47
46
45
44
43
42
41
40
39
38
37
36
-40°C
+25°C
+85°C
1930MHz
1960MHz
1990MHz
1920
1930
1940
1950
1960
1970
1980
1990
2000
8
10
12
14
16
18
20
22
24
26
Freq (MHz)
Freq (MHz)
XP1076-SD, ACPR vs. Frequency, 5V, 485mA
XP1076-SD, ACPR vs. Pout vs. Temp, 5V, 485mA
-30
-35
-40
-45
-50
-55
-60
-65
-70
-75
-80
-40
-45
-50
-55
-60
-65
-70
-75
IS-95, 9 forward channels, 885 kHz offset
IS-95, 9 forward channels, 885 kHz offset
1930MHz
1960MHz
1990MHz
-40°C
+25°C
+85°C
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Pout (dBm)
Pout (dBm)
XP1076-SD, NF, 5V, 485mA
11.0
10.0
9.0
8.0
7.0
6.0
5.0
4.0
3.0
-40°C
+25°C
+85°C
1.80
1.85
1.90
1.95
2.00
2.05
2.10
2.15
2.20
Freq (MHz)
Page 8 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Port
VCC
Evaluation Board Schematic: 2140 MHz
R
R3
C
C7
C
C4
R
R6
C
C3
C
C2
L
L1
1
2
8
7
XP1076
SOIC-8
C
C
C6
C
C1
3
4
6
5
C11
TLIN
C
C12
Port
RFOUT
C
C
C9
R
TL1
Port
TLIN
C
C8
C10
R5
Z=50.0 Ohm
RFIN
TL2
R
R2
Z=50.0 Ohm
sch_SOIC8
X1
ComponentValues: 2140 MHz
Ref Designator
Description
15 nH 0603 Inductor
4.3 pF 0402 Capacitor
10 pF 0402 Capacitor
100 pF 0402 Capacitor
10 nF 0603 Capacitor
100 uF Tantalum Capacitor
33 pF 0402 Capacitor
2.7 pF 0402 Capacitor
1.0 pF 0402 Capacitor
0ohm 0402 Resistor
20ohm 0402 Resistor
3.0 pF 0402 Capacitor
6.8 pF 0402 Capacitor
56 ohm 0402 Resistor
Mfg
Murata
Murata
Murata
Murata
Murata
AVX
QTY
L1
1
1
1
1
2
1
2
1
1
2
1
1
1
1
C1
C2
C3
C4,C7
C5
C11,C12
Murata
Murata
Murata
C10
C6
R1, R3, R4, R5
R2
C8
C9
R6
Murata
Murata
Page 9 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Evaluation Board Layout: 2140 MHz
Vcc
RFin
RFout
Typical Performance: 2140 MHz
XP1076-SD: S11, 5V, 470mA
XP1076-SD, S21, 5V, 470mA
0
-5
22
20
18
16
14
12
10
8
25°C
-40°C
85°C
-10
-15
-20
-25
-30
-40°C
+25°C
+85°C
6
4
2
0
1.80 1.85 1.90 1.95 2.00 2.05 2.10 2.15 2.20 2.25 2.30 2.35 2.40
1.80 1.85 1.90 1.95 2.00 2.05 2.10 2.15 2.20 2.25 2.30 2.35 2.40
Freq (GHz)
Freq (GHz)
XP1076-SD: S22, 5V, 470mA
XP1076-SD: P1dB, 5V, 470mA
0
33
32
31
30
29
28
27
26
25
24
23
22
21
20
-5
-10
-15
-20
-25
-30
-40°C
+25°C
+85°C
-40°C
+25°C
+85°C
1.80
1.90
2.00
2.10
2.20
2.30
2.40
2100
2110
2120
2130
2140
2150
2160
2170
2180
Freq (GHz)
Freq (MHz)
Page 10 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Typical Performance: 2140 MHz (cont.)
XP1076-SD: OIP3 vs. Frequency vs. Temp, 5V, 470mA
XP1076-SD: OIP3 vs. Pout vs. Frequency, 5V, 470mA
50
49
48
47
46
45
44
43
42
41
40
39
38
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
-40°C
25°C
85°C
2110MHz
2140MHz
2170MHz
2100
2110
2120
2130
2140
2150
2160
2170
2180
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Freq (MHz)
Pout (dBm)
XP1076-SD: ACPR vs. Pout, 5V, 470mA
XP1076-SD: ACPR vs. Temp, 5V, 470mA, 1960 MHz
-40
-45
-50
-55
-60
-65
-30
-35
-40
-45
-50
-55
-60
-65
WCDMA, TM-1, 64 DPCH
WCDMA, TM-1, 64 DPCH
-40°C
+25°C
+85°C
2110MHz
2140MHz
2170MHz
14
15
16
17
18
19
20
21
22
23
24
25
14
15
16
17
18
19
20
21
22
23
24
25
Pout (dBm)
Pout (dBm)
XP1076-SD: NF, 5V, 470mA
11.0
10.0
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.10
2.15
2.20
2.25
2.30
Freq (MHz)
Page 11 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Typical Performance
The below plots show performance over different quiescent currents (Iq).The quiescent current can be varied by varying the resistor
(R3) connected to pin #1 (Vref) as shown in the schematic on page 9.
XP1076-SD: Icc vs. Pout vs. Iq, 5V, 2140 MHz
XP1076-SD: ACPR vs. Pout vs. Iq, 5V, 2140 MHz
600
550
500
450
400
350
300
250
200
-30
-35
-40
-45
-50
-55
-60
-65
250mA, R3 = 510 ohm
WCDMA, TM-1, 64 DPCH
300mA, R3 = 330 ohm
350mA, R3 = 200 ohm
400mA, R3 = 100 ohm
470mA, R3 = 0 ohm
250mA, R3 = 510 ohm
300mA, R3 = 330 ohm
350mA, R3 = 200 ohm
400mA, R3 = 100 ohm
470mA, R3 = 0 ohm
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
14
15
16
17
18
19
20
21
22
23
24
25
Pout (dBm)
Pout (dBm)
XP1076-SD: OIP3 vs. Pout vs. Iq, 5V, 2140 MHz
XP1076-SD: NF vs. Frequency vs. Iq, 5V
48
47
46
45
44
43
42
41
40
39
38
37
36
10.0
9.5
9.0
8.5
8.0
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
250mA, R3 = 510 ohm
300mA, R3 = 330 ohm
350mA, R3 = 200 ohm
400mA, R3 = 100 ohm
470mA, R3 = 0 ohm
250mA, R3 = 510 ohm
300mA, R3 = 330 ohm
350mA, R3 = 200 ohm
400mA, R3 = 100 ohm
470mA, R3 = 0 ohm
2.00
2.05
2.10
2.15
2.20
2.25
2.30
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Pout (dBm)
Pout (dBm)
Evaluation Board Schematic
Pin-out Details
Pin
1
Function Description
Vref
Vbias
RFout
Vref
Reference voltage
RF Input
N/C
3
RFin
6, 7
8
RFout
Vbias
RF output and voltage supply (Vcc)
Bias circuit voltage
RFin
RFout
N/C
2,4,5 N/C
Not connected
N/C
Backside slug is emitter GND
Page 12 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Physical Dimensions
It is recommended that all N/C pins be grounded
and sufficient number of plated thru vias be added
under the ground plane to insure RF stability and
good thermal grounding.
Page 13 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
700-2300 MHz
31.5 dBm InGaP HBT Power Amplifier
January 2010 - Rev 13-Jan-10
XP1076-SD
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product.This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage.Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained.Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow)“Pb Free”processes.
Ordering Information
Part Number for Ordering
XP1076-SD-0G00
XP1076-SD-0G0T
XP1076-SD-EV1
Description
Matte Tin plated RoHS compliant SOIC-8 surface mount package in bulk quantity
Matte Tin plated RoHS compliant SOIC-8 surface mount package in tape and reel
Evaluation Board @ 900 MHz
XP1076-SD-EV3
Evaluation Board @ 1950 MHz
XP1076-SD-EV2
Evaluation Board @ 2140 MHz
Caution: ESD Sensitive
Appropriate precautions in handling, packaging
and testing devices must be observed.
Proper ESD procedures should be followed when handling this device.
Page 14 of 14
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
相关型号：
XP1101
Small Signal Bipolar Transistor, 0.03A I(C), 40V V(BR)CEO, 2-Element, PNP, Silicon,
PANASONIC
XP1101TX
Small Signal Bipolar Transistor, 0.03A I(C), 40V V(BR)CEO, 2-Element, PNP, Silicon,
PANASONIC
XP1110TX
Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 2-Element, PNP, Silicon
PANASONIC
XP1111TX
Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 2-Element, PNP, Silicon
PANASONIC
©2020 ICPDF网 联系我们和版权申明