ICF-1170I-M-ST [MOXA]
Industrial CAN-to-fiber converters;
| 型号： | ICF-1170I-M-ST |
| 厂家： | 
Moxa |
| 描述： | Industrial CAN-to-fiber converters |
| 文件： | 总3页 (文件大小：717K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ICF-1170I Series
Industrial CAN-to-fiber converters
Features and Benefits
• Transmits data up to 2 km over optical fiber
• Converts CAN signals to fiber and fiber to CAN signals
• Baudrate up to 1 Mbps
• Dual power inputs for redundancy
• DIP switch for 120 ohm terminal resistance
• DIP switch for fiber test mode
• LEDs for Fiber Tx, Fiber Rx, Power 1, Power 2
• Wide-temperature model available for -40 to 85°C environments
• Fully compatible with the ISO 11898 standard
Certifications
Introduction
The ICF-1170I Series CAN-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 kV optical
isolation for the CAN bus system and dual power inputs with alarm contact relay to ensure that your CAN bus system will remain online.
Fiber Test Mode
Fiber Test Mode can be used to test the fiber cable between two ICF-1170I units, and it provides a simple way to determine if the fiber cable is
transmitting data correctly. When in Fiber Test Mode, the fiber transceiver (Tx) will continuously send out a data signal and the Fiber Tx LED will
light up. On the other side of the connection, when the ICF-1170I fiber transceiver (Rx) receives the data signal from the Tx side, the Fiber Rx LED
will light up.
Specifications
Serial Interface
Optical Fiber
ICF-1170I-M-ST: 100BaseFX ports (multi-mode ST connector)
Low-speed Fiber Module
Multi-mode
50/125 µm, 800 MHz
Fiber Cable Requirements
62.5/125 µm, 500 MHz
Typical Distance
Typical (nm)
2 km
850
Wavelength
TX Range (nm)
RX Range (nm)
840 to 860
800 to 900
0 to -5
0 to -20
15
TX Range (dBm)
RX Range (dBm)
Link Budget (dB)
Dispersion Penalty (dB)
Optical Power
1
1
www.moxa.com
CAN Interface
Isolation
2 kV (built-in)
No. of Ports
Signals
1
CAN_L, CAN_H, CAN Signal GND
N/A, 120 ohms (by DIP)
Terminator
Power Parameters
Input Current
221 mA @ 12 to 48 VDC
221 mA @ 12 to 48 VDC
12 to 48 VDC
Power Consumption
Input Voltage
No. of Power Inputs
Overload Current Protection
Power Connector
2
Supported
Terminal block (for DC models)
Physical Characteristics
Housing
Metal
IP Rating
Dimensions
Weight
IP30
30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
178 g (0.39 lb)
Installation
DIN-rail mounting
Environmental Limits
Operating Temperature
ICF-1170I-M-ST: 0 to 60°C (32 to 140°F)
ICF-1170I-M-ST-T: -40 to 85°C (-40 to 185°F)
Storage Temperature (package included)
Ambient Relative Humidity
-40 to 85°C (-40 to 185°F)
5 to 95% (non-condensing)
Standards and Certifications
EMC
EN 55032/24
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
Environmental Testing
IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-3
Safety
EN 60950-1, IEC 60950-1
IEC 60068-2-6
Vibration
2
www.moxa.com
MTBF
Time
792,085 hrs
Standards
Telcordia (Bellcore), GB
Warranty
Warranty Period
5 years
Details
See www.moxa.com/warranty
Package Contents
Device
1 x ICF-1170I Series converter
Documentation
1 x quick installation guide
1 x warranty card
Dimensions
Ordering Information
Model Name
Operating Temp.
0 to 60°C
ICF-1170I-M-ST
ICF-1170I-M-ST-T
-40 to 85°C
© Moxa Inc. All rights reserved. Updated May 08, 2020.
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
3
www.moxa.com
相关型号：
©2020 ICPDF网 联系我们和版权申明