MDP-FT [MSYSTEM]
Lightning Surge Protectors for Electronics Equipment M-RESTER;型号: | MDP-FT |
厂家: | M-SYSTEM |
描述: | Lightning Surge Protectors for Electronics Equipment M-RESTER |
文件: | 总4页 (文件大小:122K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: MDP-FT
Lightning Surge Protectors for
Electronics Equipment M-RESTER
RELATED PRODUCTS
• Telemetering module (model: TMS)
• 300 bps modem (model: MOD2)
• 1200 bps modem (model: MOD3x)
• Voice/data modem (model: MOD4)
• 1200 bps modem (model: MOD5)
LIGHTNING SURGE PROTECTOR FOR TELEMETERING USE
(3.4 kHz)
Functions & Features
• Designed specifically to protect telemetering systems
utilizing leased circuit
GENERAL SPECIFICATIONS
Construction: Plug-in
• Applied to modems for computer using audio band signals
and to telemetering systems
Connection: M4 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
• Absorbs surges only without affecting instrumentation
signal
• No interruption of signal by unplugging the protector
element
INSTALLATION
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
23.5 (.93)
Weight:
120 g (0.26 lb), standard
Lot.NO
N1430B
100
(3.94)
JPAN
145 g (0.32 lb), with DIN rail mounting adapter
MADEIN
M•STER
MODEL
PERFORMANCE
Max. continuous operating voltage (Uc):
Line to line: ±1.2 V
80 (3.15)
mm (inch)
Line to earth: ±140 V
Voltage protection level (Up):
• @ 1 kV (100 A)
MODEL: MDP–FT[1]
Line to line: ±15 V
Line to earth: ±650 V
• @ 2 kV (1 kA)
ORDERING INFORMATION
• Code number: MDP-FT[1]
Specify a code from below for [1].
(e.g. MDP-FT/A33/Q)
Line to line: ±45 V
Line to earth: ±800 V
Response time:
• Specify the specification for option code /Q
(e.g. /C01)
Line to line: ≤ 4 nsec.
Line to earth: ≤ 20 nsec.
Leakage current @Uc:
Line to line: ≤ 20 μA
[1] OPTIONS (multiple selections)
DIN Rail Mounting Adapter
blank: Without
Line to earth: ≤ 10 μA
Max. discharge current (Imax): 5000 A (8 / 20 μs)
/A33: With adapter (model A-33)
Other Options
Nominal current (I ): 100 mA
N
Internal series resistance: ≤ 8 Ω ±20 % (including return)
Capacitance @ 1 MHz:
blank: none
/Q: Option other than the above (specify the specification)
Line to line: ≤ 500 pF
Line to earth: ≤ 100 pF
Surge protection: IEC 61643-21 Categories C1, C2, D1
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
MDP-FT SPECIFICATIONS
ES-8118 Rev.18 Page 1/4
http://www.m-system.co.jp/
MODEL: MDP-FT
CONNECTION EXAMPLES
■ 4-WIRE CONNECTION
MODEM A
MODEM B
MDP-FT
MDP-FT
P1
S1
S2
S1
P1
P2
S
R
P2
S2
G
G
G
G
DTE
FG
R
FG
DTE
P1
P2
S1
S2
S1
S2
P1
P2
S
(PROTECTED EQUIPMENT)
(PROTECTED EQUIPMENT)
MDP-FT
MDP-FT
■ 2-WIRE CONNECTION
MODEM A
MODEM B
MDP-FT
MDP-FT
P1
P2
S1
S2
S1
S2
P1
P2
S
R
G
G
DTE
DTE
FG
FG
(PROTECTED EQUIPMENT)
(PROTECTED EQUIPMENT)
GROUNDING
PROTECTED
EQUIPMENT
M-RESTER
G
G
GROUNDING
(100 ohms or less)
CROSSOVER WIRE
A crossover wire between M-RESTER ground and the ground or
metallic housing of the equipment is required for protection.
If the protected equipment has no ground terminal, ground the
M-RESTER only.
When the M-RESTER is mounted with DIN Rail Mounting Adapter,
connect the grounding wire to the mounting screw of the M-RESTER.
MDP-FT SPECIFICATIONS
ES-8118 Rev.18 Page 2/4
http://www.m-system.co.jp/
MODEL: MDP-FT
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
■ STANDARD
80 (3.15)
53 (2.09)
2–5 (.20) dia.
MTG HOLE
23.5 (.93)
27 (1.06)
HEAD ELEMENT
P1
P2
BASE
4–M4 TERMINAL SCREW
S1
S2
GROUND TERMINAL (G)
(used as mounting bracket)
■ WITH DIN RAIL MOUNTING ADAPTER
8.5
(.33)
[3.3 (.13)]
80 (3.15)
53 (2.09)
27 (1.06)
23.5 (.93)
DIN RAIL
35mm wide
P1 P2
4–M4 TERMINAL SCREW
S1 S2
2–M4 MOUNTING SCREW
(used as ground terminal (G))
MOUNTING REQUIREMENTS unit: mm (inch)
2–M4 SCREW
25 (.97) min.
MDP-FT SPECIFICATIONS
ES-8118 Rev.18 Page 3/4
http://www.m-system.co.jp/
MODEL: MDP-FT
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
4Ω
S1
P1
ELEMENT
ZD
Discharge
Elements
TO CABLE
TO EQUIPMENT
ZD
S2
P2
4Ω
BASE
G
GROUND TERMINAL
(used as mounting attachment)
Specifications are subject to change without notice.
MDP-FT SPECIFICATIONS
ES-8118 Rev.18 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明