R5-MS1AS [MSYSTEM]
Remote I/O R5 Series POTENTIOMETER INPUT MODULE;型号: | R5-MS1AS |
厂家: | M-SYSTEM |
描述: | Remote I/O R5 Series POTENTIOMETER INPUT MODULE 输入元件 |
文件: | 总3页 (文件大小:108K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R5-MS1A
I/O: Euro type connector terminal
Remote I/O R5 Series
(Applicable wire size: 0.2 – 2.5 mm
2
(AWG24 - 12),
stripped length 7 mm)
POTENTIOMETER INPUT MODULE
(re-transmitted output)
Internal power: Via the base (model: R5-BS)
Isolation: Input to output to internal bus or internal power
Zero/Span adj. mode selector: Rotary switch; monitor mode,
adj. mode and simulated output mode selectable
RUN indicator: Bi-color (red/green) LED;
18 (.71)
2
3
4
Red when the bus A operates normally;
1
5
0
7 6
9
8
90
(3.54)
Green when the bus B operates normally;
Amber when both buses operate normally.
96.5
(3.80)
INPUT SPECIFICATIONS
Total resistance: 100 Ω – 10 kΩ
Minimum span: 50 % of the total resistance range
Excitation: 0.5 V DC
mm (inch)
MODEL: R5–MS1A[1][2]
OUTPUT SPECIFICATIONS
Operational range: Approx. 0 – 24 mA DC
ORDERING INFORMATION
• Code number: R5-MS1A[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R5-MS1AW/Q)
INSTALLATION
• Specify the specification for option code /Q
(e.g. /C01)
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R5-BS)
Weight: 100 g (3.53 oz)
NO. OF CHANNELS
1: 1 channel
PERFORMANCE
Conversion accuracy
OUTPUT
Current
Input: ±0.1 %
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
Output: ±0.1 % of the retransmitted range + input
conversion accuracy
[1] COMMUNICATION MODE
S: Single
Data range: 0 – 10000 of the input range
Data allocation: 1
W: Dual
Temp. coefficient
Input: ±0.015 %/°C (±0.008 %/°F)
Output: ±0.02 %/°C (±0.01 %/°F)
Resolution: 1/10000 of the total resistance range
(Reduced by the actual range determined zero/ span
positions. Minimum 50 % of the total resistance range must
be maintained.)
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Response time: ≤ 0.2 sec. (0 – 90 %)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (input to output
to internal bus or internal power)
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
/C02: Polyurethane coating
/C03: Rubber coating
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R5-BS)
R5-MS1A SPECIFICATIONS
ES-7580 Rev.6 Page 1/3
http://www.m-system.co.jp/
MODEL: R5-MS1A
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
FUNCTIONS
• Zero/Span Adjustment Modes
Monitor Mode
Re-transmits the input signal as output in proportion.
Input 0 % Adjustment Mode
Adjusts the 0% input signal. Press the UP button to set.
Input 100 % Adjustment Mode
Adjusts the 100 % input signal. Press the UP button to set.
Output 0 % Adjustment Mode
Adjusts the 0 % output signal using the UP/DOWN buttons,
in monitoring the output value with a multimeter.
SW1 through SW3 switch the internal increments by 1, 5
and 10.
Output 100 % Adjustment Mode
Adjusts the 100 % output signal using the UP/DOWN
buttons, in monitoring the output value with a multimeter.
SW4 through SW6 switch the internal increments by 1, 5
and 10.
Simulated Output Mode
Outputs the simulated signals of 0 %, 50 % and 100 %.
• How to Operate
1) Start up in Monitor Mode (SW position = 0) and wait for 2
or 3 seconds.
2) Switch to another mode and go through the adjustments.
3) Reset the switch to the position ‘0’ so that the new
setting is stored in the internal memory.
EXTERNAL VIEW
RUN
RUN LED
4
C
Zero/Span Adj.
Mode Selector
UP
DOWN
UP Button
DOWN Button
4
1
5
2
6
3
Euro Type
Connector Terminal
R5-MS1A SPECIFICATIONS
ES-7580 Rev.6 Page 2/3
http://www.m-system.co.jp/
MODEL: R5-MS1A
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
LOCKING CLAMP
18 (.71)
6.5
90 (3.54)
(.26)
4
1
5
2
6
3
POSITIONING GUIDE
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
POTENTIOMETER
RUN LED
max.
Excitation
Generator
+
1
2
3
3
2
1
Input Circuit
INTERNAL BUS A
Communication
Circuit
INTERNAL BUS B*
–
min.
Control
Circuit
INTERNAL POWER
Output Driver
4
5
6
+
–
OUTPUT
UP/DOWN
BUTTONS
ROTARY SW
*For dual redundant communication.
Specifications are subject to change without notice.
R5-MS1A SPECIFICATIONS
ES-7580 Rev.6 Page 3/3
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明