R7G4HEIP-6-DA16 [MSYSTEM]
Remote I/O R7G4H Series EtherNet/IP I/O MODULE;
| 型号： | R7G4HEIP-6-DA16 |
| 厂家： | 
M-SYSTEM |
| 描述： | Remote I/O R7G4H Series EtherNet/IP I/O MODULE |
| 文件： | 总5页 (文件大小：195K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: R7G4HEIP-6-DA16
/C02: Polyurethane coating
/C03: Rubber coating
Remote I/O R7G4H Series
EtherNet/IP I/O MODULE
(NPN/PNP discrete input, 16 points, screw terminal block)
RELATED PRODUCTS
• PC configurator software (model: R7CFG)
Functions & Features
• EDS file
• 16 points NPN/PNP discrete input module for EtherNet/IP
• Supports DLR (Device Level Ring) to form a ring topology
The EDS files and configurator software are downloadable at
M-System’s web site.
For connecting to PC, use commercially available Mini-B
type USB cable. (provided by user)
130 (5.12)
GENERAL SPECIFICATIONS
Connection
EtherNet/IP: RJ-45 Moduler Jack
Power input, input: M3 separable screw terminal (torque 0.5
N·m)
55 (2.17)
Solderless terminal: Refer to the drawing at the end of the
section.
55 (2.17)
(mm)
Recommended manufacturer: Japan Solderless Terminal
MFG.Co.Ltd, Nichifu Co.,ltd
MODEL: R7G4HEIP-6-DA16-R[1]
Applicable wire size: 0.25 to 1.65 mm
2
(AWG 22 to 16)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (gray)
Isolation: Input to EtherNet/IP or FE to power
Status indicator LED: PWR, RUN
ORDERING INFORMATION
• Code number: R7G4HEIP-6-DA16-R[1]
Specify a code from below for [1].
(e.g. R7G4HEIP-6-DA16-R/Q)
(Refer to the instruction manual)
Discrete input status indicator LED: Green LED turns on with
input ON
• Specify the specification for option code /Q
(e.g. /C01)
Read rate: Selectable with R7CFG
■Recommended solderless terminal
TERMINAL BLOCK
3.3 (.13) max
6: Screw terminal block for power supply
RJ-45 Modular jack for communication
Screw terminal block for I/O
mm (inch)
I/O TYPE
DA16: NPN/PNP discrete input, 16 points
EtherNet/IP COMMUNICATION
Communication Standard: IEEE 802.3u
POWER INPUT
Transmission: 10BASE-T, 100BASE-TX
DC power
Baud rate: 10/100 Mbps (Auto Negotiation function)
Protocol: EtherNet/IP
R: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)
Max. number of socket connections: 3
Connection type: Exclusive owner / Listen only / Input only
Transmission media: 10BASE-T (STP, Category 5), 100BASE-
TX (STP, Category 5e)
[1] OPTIONS
blank: none
Network topology: Line, star and ring
/Q: With options (specify the specification)
Max. length of fieldbus segment: 100 meters
IP address: 192.168.0.250 (factory setting);
Only host address in IP address is configurable via rotary
switches, the other items via PC configurator software
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
R7G4HEIP-6-DA16 SPECIFICATIONS
ES-8004-A Rev.0 Page 1/5
http://www.m-system.co.jp/
MODEL: R7G4HEIP-6-DA16
(model: R7CFG).
PC CONFIGURATOR
DLR supported
The following parameters can be set with using PC
Configurator Software (model: R7CFG)
Refer to the users manual for the R7CFG for detailed
operation of the software program.
■ CHANNEL BATCH SETTING
Port No.: 2222, 44818
I/O data size: One (1) word
Status indicator LEDs: MS, NS (Refer to the instruction
manual for details)
DEFAULT
PARAMETER
SETTING RANGE
SETTING
INPUT SPECIFICATIONS
Common: Positive or negative common (NPN/PNP) per 16
Conversion rate 1 ms, 5 ms, 10 ms, 20 ms, 10 ms
50 ms, 70 ms, 100 ms,
200 ms
points
Maximum inputs applicable at once: No limit (at 24 V DC)
Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max.
ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA
OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1 mA
Input current: ≤ 5.5 mA per point at 24 V DC
Input resistance: Approx. 4.4 kΩ
■ EtherNet SETTING
DEFAULT
SETTING
PARAMETER
SETTING RANGE
IP Address
0.0.0.0 - 255.255.255.255
0.0.0.0 - 255.255.255.255
192.168.0.250
255.255.255.0
192.168.0.1
3.0 (sec.)
Subnet Mask
Default Gateway 0.0.0.0 - 255.255.255.255
ON delay: ≤ 0.2 msec.
Time Out
0.0 - 3276.7 (sec.)
DHCP / CONFIG
Use IP Address
CONFIG
OFF delay: ≤ 0.5 msec.
INSTALLATION
Current consumption: Approx. 45 mA
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -20 to +65°C (-4 to +149°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail (35 mm rail)
Weight: 200 g (0.44 lb)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(input to EtherNet/IP or FE to power)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
R7G4HEIP-6-DA16 SPECIFICATIONS
ES-8004-A Rev.0 Page 2/5
http://www.m-system.co.jp/
MODEL: R7G4HEIP-6-DA16
EXTERNAL VIEW
IP Address Setting
Rotary SW
Discrete Input Status Indicator LED
PC Configurator Jack
Status Indicator LED
RJ-45 Modular Jack
SA1
×10
SA2
×1
LNK1
LNK2
PWR NS LNK2
MS LNK1
CNFG.
4
5
6
3
7
10 11 12 13 14 15 16 17 18
1
2
9
1
2
3
4
5
6
7
8
Power Supply Terminals
Input Terminals
TERMINAL ASSIGNMENTS
■ INPUT TERMINAL ASSIGNMENT
10
11
12
X3
13
X5
14
X7
15
16
17
18
COM X1
X9 X11 X13 X15
1
2
3
4
5
6
7
8
9
COM X0
X2
X4
X6
X8 X10 X12 X14
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
COM Common
X0 Input 0
X2 Input 2
X4 Input 4
X6 Input 6
X8 Input 8
X10 Input 10
X12 Input 12
X14 Input 14
10 COM Common
11
12
13
14
15
X1 Input 1
X3 Input 3
X5 Input 5
X7 Input 7
X9 Input 9
16 X11 Input 11
17 X13 Input 13
18 X15 Input 15
■POWER SUPPLY TERMINAL ASSIGNMENT
4 5
NC NC
6
＋
7
24V 0V
1
2
3
NC NC FE
1. NC
2. NC
3. FE
4. NC
5. NC
6. +24V
7. 0V
-
-
Functional earth
-
-
Power supply (24V DC)
Power supply (0V)
R7G4HEIP-6-DA16 SPECIFICATIONS
ES-8004-A Rev.0 Page 3/5
http://www.m-system.co.jp/
MODEL: R7G4HEIP-6-DA16
I/O DATA DESCRIPTIONS
■ DISCRETE INPUT
15
0
Input 0
Input 1
Input 2
Input 3
Input 7
Input 8
Input 15
0: OFF 1: ON
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm
154 (6.06)
140 (5.51)
55 (2.17)
[(4) 0.16]
130 (5.12)
4
5
6
7
10 11 12 13 14 15 16 17 18
1
2
3
9
1
2
3
4
5
6
7
8
DIN RAIL
35mm wide
2 – 4.3 dia. 4 deep.
6
6
7–M3 SCREW
18–M3 SCREW
TERMINALS for Input
TERMINALS for
POWER SUPPLY
MOUNTING REQUIREMENTS unit: mm (inch)
140 (5.51)
2 – M4
R7G4HEIP-6-DA16 SPECIFICATIONS
ES-8004-A Rev.0 Page 4/5
http://www.m-system.co.jp/
MODEL: R7G4HEIP-6-DA16
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Note: In order to improve EMC performance, bond the FE terminal to ground.
Caution: FE terminal is NOT a protective conductor terminal.
■ Input Circuit
Comm. Circuit
Input Circuit
1
1
*
*
RJ-45 Modular Jack
RJ-45 Modular Jack
COM
X0
EtherNet/IP
1
2
Control
Circuit
COM
COM 10
X0
1
EtherNet/IP
FE
X2
3
3
6
7
1
2
4
5
2
X4
4
24V DC
0V
Control
Circuit
X6
5
X8
6
NC
X10
X12
X14
COM
X1
7
NC
X15 18
8
NC
9
NC
10
11
12
13
14
15
16
17
18
■ Input Connection Examples
NPN Connection
PNP Connection
+
−
−
+
X3
COM
1
COM
1
X5
COM 10
COM 10
X7
2
2
X0
X0
X9
X11
X13
X15
X15 18
X15 18
*1. The network cable can be connected to either one.
Specifications are subject to change without notice.
R7G4HEIP-6-DA16 SPECIFICATIONS
ES-8004-A Rev.0 Page 5/5
http://www.m-system.co.jp/
相关型号：
©2020 ICPDF网 联系我们和版权申明