R8-NEIP-R [MSYSTEM]
Remote I/O R8 Series POWER/NETWORK MODULE;
| 型号： | R8-NEIP-R |
| 厂家： | 
M-SYSTEM |
| 描述： | Remote I/O R8 Series POWER/NETWORK MODULE |
| 文件： | 总5页 (文件大小：232K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: R8-NEIP1
Remote I/O R8 Series
RELATED PRODUCTS
• PC Configurator cable (model: COP-US)
• PC configurator software (model: R8CFG)
• EDS file
POWER/NETWORK MODULE
(EtherNet/IP)
The EDS file and configurator software are downloadable at
M-System’s web site.
Functions & Features
• Free combination of analog and discrete I/O
• Space-saving
PACKAGE INCLUDES...
Typical Applications
• Protective cover
• Remote I/O for DCS and PLC
GENERAL SPECIFICATIONS
Connection
• Power input or excitation supply: Tension clamp (Front
Twin connection)
Applicable wire size: 0.2 - 2.5 mm
2
Stripped length: 10 mm
• EtherNet/IP: RJ-45 modular jack
• Internal bus or internal power or excitation supply: Via
internal bus connector
Max. number of I/O modules: 16
(Max. consumption current of I/O modules: 1.6 A)
Isolation: EtherNet/IP to internal bus or internal power or
power input to excitation supply to FE1
Status indicators: Power, RUN, MS, NS, LNK1, LNK2
Data allocation: Mode 1, 2
MODEL: R8–NEIP1–R[1]
ORDERING INFORMATION
• Code number: R8-NEIP1-R[1]
Specify a code from below for [1].
(e.g. R8-NEIP1-R/Q)
EtherNet/IP COMMUNICATION
Communication Standard: IEEE 802.3u
Transmission: 10BASE-T, 100BASE-TX
Baud rate: 10/100 Mbps (Auto Negotiation function)
Protocol: EtherNet/IP
• Specify the specification for option code /Q
(e.g. /C01)
MODULE TYPE
NEIP1: EtherNet/IP
Connection type: Exclusive owner / Listen only / Input only
Max. number of socket connections: 3
Transmission media: 10BASE-T (STP, Category 5), 100BASE-
TX (STP, Category 5e)
POWER INPUT
DC power
Network topology: Line, star and ring
Max. length of fieldbus segment: 100 meters
IP address: 192.168.0.250 (factory setting);
Only host address in IP address is configurable via rotary
switches, the other items via PC configurator software
(model: R8CFG).
R: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)
[1] OPTIONS
blank: none
DLR supported
/Q: With options (specify the specification)
Port No.: 2222, 44818
I/O data size: 40 - 140 byte (configurable with DIP SW)
Status indicator LEDs: MS, NS (Refer to the instruction
manual for details)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
INSTALLATION
Power consumption
•DC: Approx. 12 W 24 V DC (@ internal power max. current
R8-NEIP1 SPECIFICATIONS
ES-9799 Rev.0 Page 1/5
http://www.m-system.co.jp/
MODEL: R8-NEIP1
1.6 A)
Internal power supply (power supply for I/O module):
• DC power supply: 5 V DC
• Current capacity: 1.6 A
Excitation supply output (excitation for I/O module)
•DC: 24 V DC ±10 %
•Operational current: 10 A
(From power supply (exitation supply) connector, via
connector for internal bus, supplied to each I/O module.
Power output current consumption must be under
operational current.)
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
Weight: 180 g (0.40 lb)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute
(EthrtNet/IP to internal bus or internal power or power input
to excitation supply to FE1)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
R8-NEIP1 SPECIFICATIONS
ES-9799 Rev.0 Page 2/5
http://www.m-system.co.jp/
MODEL: R8-NEIP1
EXTERNAL VIEW
Status Indicator LED
Fixed Address Setting
Rotary SW
LNK1
Power
RUN
MS
NS
LNK1
LNK2
Internal Bus Connector
EtherNet/IP Communication
RJ-45 Modular Jack
X100
SA
X10
X1
Function Setting
DIP SW
LNK2
Connector for
Power Supply and
Excitation Supply
8
7
6
5
4
3
2
1
8
6
4
2
7
5
3
1
On
Config
On
Miniature Jack Connector
for Configuration
■ STATUS INDICATOR LED
ID
Power
RUN
MS
STATE
ON
COLOR
Green Power supplied
TO INDICATE
ON/Blink
ON
Green Turns on or blinks depending on the status
Green Normal operation
ON
Critical failure
Red
Minor failure
Blink
On
NS
Connections are established
Green
Connections are not established
Blink
ON
Critical Link failure
Red
Minor Link failure
Blink
ON
LNK1
LNK2
Green Link 1 is established
Green Link 2 is established
ON
CONNECTION DIAGRAMS
■ POWER SUPPLY, EXCITATION SUPPLY CONNECTOR TERMINAL ASSIGNMENT
Printed-circuit board connector (Phoenix Contact)
Unit side connector: MSTBV2,5/5-GF-5,08AU
Cable side connector: TFKC2,5/5-STF-5,08AU
PIN
ID
FUNCTION
1
2
3
4
5
No.
1
24V Power supply 24V DC
2
0V
+
Power supply 0V DC
3
Excitation supply 24V DC
Excitation supply 0V DC
4
−
5
FE1 Grounding
R8-NEIP1 SPECIFICATIONS
ES-9799 Rev.0 Page 3/5
http://www.m-system.co.jp/
MODEL: R8-NEIP1
EXTERNAL DIMENSIONS unit: mm [inch]
■UNIT
50 (1.97)
[3 (.12)]
55 (2.17)
[4 (.16)]
DIN RAIL
(35 mm wide)
■PROTECTIVE COVER
5 (.20)
50 (1.97)
R8-NEIP1 SPECIFICATIONS
ES-9799 Rev.0 Page 4/5
http://www.m-system.co.jp/
MODEL: R8-NEIP1
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Note: In order to improve EMC performance, bond the FE1 terminal to ground.
Caution: FE1 terminal is NOT a protective conductor terminal.
STATUS ROTARY SW
DIP SW
IND.
Isolation
Isolation
Comm.
Circuit
INTERNAL
BUS
RJ-45 MODULAR JACK
RJ-45 MODULAR JACK
EtherNet/IP
EtherNet/IP
Control
Circuit
JACK
PC CONFIGURATION JACK
+24V
0V
+
Power
Circuit
(No isolation)
INTERNAL
POWER (5V)
POWER
EXC. SUPPLY (24V)
EXC. SUPPLY
−
FE1
Specifications are subject to change without notice.
R8-NEIP1 SPECIFICATIONS
ES-9799 Rev.0 Page 5/5
http://www.m-system.co.jp/
相关型号：
©2020 ICPDF网 联系我们和版权申明