HN-214 [MURATA]
2.4 GHz Frequency Hopping Wireless Data Modem;
| 型号： | HN-214 |
| 厂家： | 
muRata |
| 描述： | 2.4 GHz Frequency Hopping Wireless Data Modem 无线 |
| 文件： | 总3页 (文件大小：241K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DEVELOPER KIT
(Info: click here)
HN-210
Features:
Benefits:
• 2.4GHz frequency hopping spread
spectrum technology
• Exceptional immunity to multipath
fading and jamming
• 460Kbps over the air and 115Kbps I/O
data rates
• 64 hopping patterns
• FCC certified and CE marked
• Integral 6dB patch antenna
• RS-232 asynchronous or USB serial
interface
• Supports high speed applications
needing long range
• Co-location of multiple networks without
interference
• License-free application worldwide
• Cost-effective, simple installation
• Connects to PC serial ports
2.4 GHz
Frequency
Hopping Wireless
Data Modem
The HN-210 is a versatile, low cost, multi-purpose 2.4 GHz frequencyhopping wireless data modem. The
HN-210 communicates through a serial port with over the air of 460.8Kbps and supports both point-to-point
and point-to-multipoint networks.
Specifications
HN-210
HN-210X
HN-214
Frequency Band
2401 - 2471 MHz (USA) — 2448 - 2480 MHz (France, Spain) 2473 - 2495 MHz (Japan)
— 2452 - 2478 MHz (Canada)
Licensing
Unlicensed under FCC Part 15, ETSI 300.328
Number of Channels
Hopping Patterns
I/O Data Rates
75 USA; 25 Canada, France, Spain & Japan
User configurable, 64 patterns (networks) available
Up to 115.2 Kbps Asynchronous
RF Channel Rate
Line of Site Range
RF Bandwidth
460 Kbps
> 5 miles
750 KHz
Modulation Type
Output Impedance
Network Protocol
Transmit Power
Receive Sensitivity
Power Requirements
Serial Data Interface
GFSK
50 ohms
Dynamically assigned TDMA with ARQ
EIRP: +16dBm/+24dBm
-99dBm for 10-5 BER
+18dBm
-93 dBm for 10-5 BER
9 Vdc 160mA typ. 750mA surge
Async. RS-232
EIRP: +16dBm/+24dBm
-99dBm for 10-5 BER
www.RFM.com E-mail: info@rfm.com
©2008 by RF Monolithics, Inc.
Page 1 of 3
HN-210 - 4/10/08
Mechanical Specifications
HN-210
HN-210X
HN-214
Antenna
Integrated 6dB patch
n/a
Polycarbonate, NEMA 4X
130 x 79 x 35 (excl. flange)
235g
Integrated 6dB patch
Case Materials
Dimensions (mm)
Weight excl. cable
Antenna Connector
Data Connector
Power Connector
n/a
TNC
male n/a
9-pin D/USB B
2 pin DIN
Environmental Specifications
Temperature Range
Humidity
-30°C to +70°C (radio enclosure)
95% at +40°C, Non-condensing
www.RFM.com
E-mail: info@rfm.com
Page 2 of 3
©2008 by RF Monolithics, Inc.
HN-210 - 4/10/08
Built around the WIT2410 radio, the HN-210 has an integral 6dB patch antenna creating a "single piece" modem. Communication with the HN-210 is
through a 115.2Kbps asynchronous serial port supporting a standard RS-232 interface; a USB version is also avaiable. The HN-210 communicates over
the air at 460.8Kbps and supports both point-to-point and point-to-multipoint networks. With a NEMA 4X weatherproof enclosure and aluminum mounting
flange, the HN-210 is simple to install on the side of a building or attached to a mast. With no antenna to connect, the HN-210 is simply mounted where the
antenna would ordinarily be mounted. This removes the need for long antenna cable runs, expensive in terms of both cost and performance.
The HN-210 comes with a 50-foot cable that connects to an indoor serial adapter box (included) that provides a standard RS-232 serial 9-pin D connection.
The HN-214 comes with a 4-foot cable for use when long cable runs are not needed. The serial adapter box also provides power to the HN-210 through a
universal 110/220 50/60 wall-mount power supply (also included).
The integral 6dB patch antenna provides a line-of-site range of several miles, making the HN-210 ideal for a variety of "last mile" applications. For
applications requiring more antenna gain, the HN-210X replaces the built-in patch antenna with an external TNC connector.
When paired with the RFM SNAP2410 family of products, the HN-210 provides a cost-effective link from remote devices to Ethernet/IP-based applications.
These applications include Intranetbased applications as well as Internet access. The HN-210 also is ideal for use in SCADA applications as remote
modems in multipoint configurations and is an extremely cost-effective solution for point-to-point installations. Selectable transmit power levels of 10mW
and 100mW allow the HN-210 to be used worldwide, even with the gain of the patch antenna.
Based on the M WIT2410 spread spectrum frequency-hopping radio, the HN-210 has exceptional multipath fade rejection as well as immunity to jamming.
The WIT2410 is a field proven performer that delivers robust, reliable, real-world performance.
The HN-210 is both FCC and CE marked. Operating in the 2.4GHz ISM band, the HN-210 can be deployed around the world without a license.
www.RFM.com
E-mail: info@rfm.com
Page 3 of 3
©2008 by RF Monolithics, Inc.
HN-210 - 4/10/08
相关型号：
©2020 ICPDF网 联系我们和版权申明