首页 |元器件品牌

KMBT050 [MURATA]

Ceramic Trimmer Capacitors; 陶瓷微调电容器
KMBT050
型号： KMBT050
厂家： muRata    muRata
描述：

Ceramic Trimmer Capacitors
陶瓷微调电容器

电容器
文件： 总44页 (文件大小：1118K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Ceramic Trimmer  
Capacitors  
Cat.No.T13E-14  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
EU RoHS Compliant  
s
All the products in this catalog comply with EU RoHS.  
s
EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use  
of Certain Hazardous Substances in Electrical and Electronic Equipment."  
For more details, please refer to our website 'Murata's Approach for EU RoHS'  
s
(http://www.murata.com/info/rohs.html).  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
1
CONTENTS  
Part Numbering  
2
3
2
3
4
5
6
7
8
Selection Guide of Ceramic Trimmer Capacitors  
1
2
3
4
5
6
7
8
TZR1 Series  
TZS2 Series  
TZY2 Series  
TZV2 Series  
TZC3 Series  
TZW4 Series  
TZB4 Series  
TZ03 Series  
4
8
12  
16  
20  
24  
27  
32  
37  
39  
41  
Packaging  
Recommended Adjustment Tools  
Qualified Standards  
Bluetoothr is a registered trademark or trademark of Bluetooth SIG, Inc.  
in the United States and other countries.  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
o Part Numbering  
Ceramic Trimmer Capacitors  
(Part Number)  
TZ Y2  
R
200  
A
001 R00  
q
w
e
r
t
y
u
qProduct ID  
tTerminal Shape  
Product ID  
Code  
Terminal Shape  
Top Adjustment: TZR1, TZS2, TZY2, TZV2,  
TZC3, TZW4, TZB4 (SMD Type)  
TZ  
Trimmer Capacitors  
A
wSeries/Terminal  
B
E
F
Top Adjustment: TZB4 (SMD Type)  
Rear Adjustment: TZB4 (SMD Type)  
Top Adjustment: TZ03 (Lead Type)  
Rear Adjustment: TZ03 (Lead Type)  
Code  
03  
Series/Terminal  
6mm Size Lead Type  
4mm Size SMD Type  
4mm Size SMD Type  
3mm Size SMD Type  
B4  
W4  
C3  
S2  
N
Please refer to dimensions for terminal details.  
yIndividual Specifications  
2mm Size SMD Type (Height 1.0mm)  
2mm Size SMD Type (Height 1.25mm)  
2mm Size SMD Type (Height 1.45mm)  
1mm Size SMD Type (Height 0.90mm)  
Y2  
Code  
001  
Individual Specifications  
V2  
TZR1, TZS2, TZY2, TZW4 Standard Type  
TZV2, TZC3 Standard Type  
R1  
110  
169  
TZ03 Standard Type  
eTemperature Characteristics  
A10  
B10  
TZB4 No-cover Film Standard Type  
TZB4 with Cover Film Standard Type  
Code  
Temperature Characteristics  
Z
R
K
P
NP0ppm/°C  
N750ppm/°C  
N1000ppm/°C  
N1200ppm/°C  
uPackaging  
Code  
B00  
Packaging  
Bulk  
Please refer to ratings for tolerance of temperature characteristics.  
R00  
Reel (Taping ø180mm)  
Reel (Taping ø330mm)  
R01*  
rMaximum Capacitance  
* TZB4 only.  
Expressed by three-digit alphanumerics. The unit is pico-farad  
(pF). The first and second figures are significant digits, and the  
third figure expresses the number of zeros that follow the two  
numbers. If there is a decimal point, it is expressed by the capital  
letter "R". In this case, all figures are significant digits.  
2
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Selection Guide of Ceramic Trimmer Capacitors  
Mounting Method?  
Surface Mount  
PCB Insertion  
Reflow  
Flow  
Manual Insertion  
Height 5.3mm max.  
Height 0.90mm max.  
Height 1.7mm max.  
Height 3.2mm max.  
TZB4_A  
TZR1  
TZC3  
TZ03_F  
4.0(W) x 4.5(L)  
(with cover film)  
1.5(W) x 1.7(L)  
3.2(W) x 4.5(L)  
6.0(W) x 6.0(L)  
Height 1.00mm max.  
Height 3.2mm max.  
TZB4_B  
TZ03_N  
4.0(W) x 4.5(L)  
(with cover film)  
6.0(W) x 6.0(L)  
TZS2  
TZB4_A  
2.2(W) x 2.7(L)  
4.0(W) x 4.5(L)  
Height 1.25mm max.  
TZB4_E  
4.0(W) x 4.5(L)  
(with cover film)  
TZB4_B  
4.0(W) x 4.5(L)  
TZY2  
2.5(W) x 3.2(L)  
Height 1.45mm max.  
TZB4_E  
4.0(W) x 4.5(L)  
TZV2  
2.3(W) x 3.2(L)  
High Frequency Power  
Height 2.6mm max.  
TZW4  
4.2(W) x 5.2(L)  
All Ceramic Trimmer Capacitor products comply with RoHS and ELV.  
3
• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.  
• This catalog has only tyꢀical sꢀecifications. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.  
!Note  
T1±E.ꢀdf  
Aug.10,2012  
1
Ceramic Trimmer Capacitors  
TZR1 Series  
1.7  
Features  
c
1. Ultra-spall and thin with external dipensions  
(Depth;0.15)  
0.2  
of 1.5(W)x1.7(L)x0.85(H)pp  
(80% less in volupe than the current ꢀroduct).  
2. Unique construction with no ꢀlastic paterial  
ꢀrovides suꢀerior soldering heat resistance to  
paintain excellent characteristic ꢀerforpance  
after reflow soldering.  
0.35  
±. Suitable for high frequency circuit due to high  
self-resonant frequency (6.2GHz of TZR1Z010 at  
1.0ꢀF setting).  
Tolerance: 0.1  
in mm  
(
)
Applications  
c
1. Bluetoothr  
2. °rystal oscillators  
±. °rystal filters  
4. Hand radios  
5. Miniature tuner ꢀacks (FM Radio, TV)  
6. Repote keyless entry systeps  
7. Pagers  
C min. (max.)  
(pF)  
C max.  
(pF)  
Part Number  
TC  
Q
Rated Voltage  
Withstanding Voltage  
TZR1Z010A001  
TZR1Z1R5A001  
TZR1Z040A001  
TZR1R080A001  
0.55  
0.7  
1.5  
±.0  
1.0 +100/-0%  
1.5 +100/-0%  
NP0±±00ꢀꢀp/ꢁ°  
NP0±±00ꢀꢀp/ꢁ°  
NP0±500ꢀꢀp/ꢁ°  
N750±500ꢀꢀp/ꢁ°  
200pin. at 200MHz, °pax.  
200pin. at 200MHz, °pax.  
±00pin. at 1MHz, °pax.  
±00pin. at 1MHz, °pax.  
25Vdc  
25Vdc  
25Vdc  
25Vdc  
55Vdc  
55Vdc  
55Vdc  
55Vdc  
4.0 +100/-0%  
8.0 +100/-0%  
Insulation Resistance: 10000M ohp  
Torque: 0.1 to 1.0pNp  
Oꢀerating Tepꢀerature Range: -25 to +85ꢁ°  
Construction  
c
Cover  
Metal Rotor  
Monolithic  
Stator  
4
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Temperature Characteristics  
c
1
TZR1Z010  
TZR1Z1R5  
Z010 (NP0±±00 ꢀꢀpm/Cꢁ  
Z1R5 (NP0±±00 ꢀꢀpm/Cꢁ  
+8  
+6  
+4  
+8  
+6  
+4  
+2  
0
+2  
0
65  
85  
65  
85  
-25  
-25  
20  
20  
0
0
-2  
-4  
-2  
-4  
-10  
-10  
45  
45  
Tepꢀ. (/Cꢁ  
Tepꢀ. (/Cꢁ  
-6  
-6  
-8  
-8  
-10  
-12  
-10  
-12  
TZR1Z040  
TZR1R080  
R080 (N750±500 ꢀꢀpm/Cꢁ  
Z040 (NP0±500 ꢀꢀpm/Cꢁ  
+8  
+6  
+8  
+6  
+4  
+4  
+2  
20  
Tepꢀ.(/Cꢁ  
85  
65  
+2  
0
45  
85  
65  
0
–2  
–25  
–10  
0
–25  
20  
–2  
–4  
0
45  
–10  
–4  
Tepꢀ.(/Cꢁ  
–6  
–8  
–6  
–8  
–10  
–10  
–12  
–12  
Frequency Characteristics  
c
TZR1Z010  
TZR1Z1R5  
Z010  
Z1R5  
10000  
10000  
1000  
100  
1000  
100  
0.55ꢀF set  
0.7ꢀF set  
Q
Q
10  
1
10  
1
1.0ꢀF set  
1.5ꢀF set  
0
0
0
2
4
6
8
10  
0
2
4
6
8
10  
Frequency (GHzꢁ  
Frequency (GHzꢁ  
TZR1Z040  
TZR1R080  
Z040  
R080  
1000  
1000  
100  
1000  
100  
1000  
100  
100  
10  
1
Q
Q
10  
10  
1
10  
500 1000 1500 2000 2500  
Frequency (MHzꢁ  
500  
1000  
Frequency (MHzꢁ  
1500  
2000  
5
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
Land Pattern  
c
1
2.2  
1.2  
Tolerance: 0.1  
in mm  
Temperature Profile  
c
Reflow Soldering Profile  
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)  
wSoldering profile for Eutectic solder (63Sn/37Pb)  
(Limit profile: refer to q)  
T5  
T3  
T4  
T2  
T3  
T2  
t2  
T1  
t2  
t3  
Limit Profile  
T1  
Standard Profile  
Standard Profile  
t1  
t1  
time (s)  
time (s)  
Standard Profile  
Heating  
Standard Profile  
Heating  
Peak  
temperature  
(T3)  
Peak  
temperature  
(T3)  
Pre-heating  
Pre-heating  
Cycle  
Cycle  
of reflow  
of reflow  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
150 to 180°C 60 to 120sec. 220°C  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
30 to 60sec. 245 3°C  
2 times  
150°C 60 to 120sec. 183°C  
30sec. 230 +5/-0°C 1 time  
Limit Profile  
Heating  
Temp. (T4) Time (t3)  
Peak  
temperature  
(T5)  
Pre-heating  
Temp. (T1) Time (t1)  
Cycle  
of reflow  
150 to 180°C 60 to 120sec. 230°C  
30 to 50sec. 260 +5/-0°C 2 times  
Soldering Iron  
Standard Profile  
Temperature of soldering iron tip  
Soldering time  
Soldering iron power output  
Cycle of soldering iron  
350 10°C  
3sec. max.  
30W max.  
1 time  
Notice (Storage and Operating Conditions)  
c
1. Do not use the trimmer capacitor under atmosphere  
of RTV silicone rubber (Room Temperature  
Vulcanizing Silicone Rubber) except Acetone  
liberating silicone sealant.  
6. Do not use the trimmer capacitor under the  
conditions listed below.  
(1) Corrosive gasses atmosphere  
(ex. Chlorine gas, Hydrogen sulfide gas,  
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,  
etc.)  
2. Before using trimmer capacitors, please store under  
the conditions of -10 to +40°C and 30 to 85%RH.  
3. Do not store in or near corrosive gasses.  
4. Use within 6 months of delivery.  
(2) In liquid (ex. water, oil, medical liquid,  
organic solvent, etc.)  
5. Do not store under direct sunlight.  
(3) Dusty / dirty atmosphere  
(4) Direct sunlight  
(5) Static voltage or electric/magnetic fields  
(6) Direct sea breeze  
(7) Other variations of the above  
6
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Notice (Soldering and Mounting)  
1. Soldering  
(1) TZR1 series can be soldered by reflow soldering  
method and soldering iron. Do not use flow  
soldering method (dipping).  
c
1
(6) Our recommended chlorine content of solder is  
as follows.  
(a) Solder paste: 0.2wt% max.  
(b) String solder: 0.5wt% max.  
(7) Do not use water-soluble flux (for water  
cleaning). To prevent the deterioration of  
trimmer capacitor characteristics, apply flux  
only to terminals.  
(2) Soldering conditions  
Refer to the temperature profile.  
If the soldering conditions are not suitable, e.g.,  
excessive time and/or excessive temperature, the  
trimmer capacitor may deviate from the specified  
characteristics.  
2. Mounting  
(1) Do not apply excessive force (preferably 5.0 N  
[Ref: 500gf] max.), when the trimmer capacitor  
is mounted on the PCB.  
(3) The amount of solder is critical.  
(4) The thickness of solder paste should be printed  
from 100 micro m to 150 micro m and the dimension  
of land pattern should be Murata's standard land  
pattern used at reflow soldering.  
(2) Do not warp and/or bend PCB to protect trimmer  
capacitor from breaking.  
(3) Use a pick-up nozzle of a suitable dimension.  
(1.1-1.2mm external diameter and 0.8-0.9mm bore  
diameter.)  
Insufficient amounts of solder can lead to  
insufficient soldering strength on PCB.  
Excessive amounts of solder may cause bridging  
between the terminals or contact failure due to  
flux wicking up.  
3. Cleaning  
This product cannot be cleaned because of open  
construction.  
(5) When using soldering iron, the diameter of the  
string solder shall be less than 0.5mm. The  
string solder shall be applied to the lower  
part of the terminal only. Do not apply flux  
except to the terminals. Excessive amounts of  
solder and/or applying solder to the upper part  
of the terminal may cause fixed metal rotor or  
contact failure due to flux invasion into  
the movable part and/or the contact point. The  
soldering iron should not come in contact with  
the monolithic stator of the trimmer capacitor.  
If such contact does occur, the trimmer  
capacitor may be damaged.  
4. Other  
Note the polarity of the trimmer capacitor to  
minimize influence by stray capacitance.  
(Refer to the dimensions concerning the polarity.)  
Notice (Handling)  
c
1. Use suitable screwdrivers that fit comfortably in  
3. Do not apply adhesive, lock paints, or any other  
substances to the trimmer capacitor to secure the  
rotor position. They may cause corrosion or  
electrical contact problems.  
driver slot.  
*Recommended screwdriver for manual adjustment  
MURATA: KMDR160  
2. When adjusting with a screwdriver, do not apply  
excessive force (preferably 0.5 N [Ref: 50gf] max.)  
to minimize capacitance drift. Excessive force applied  
to the screwdriver slot may cause deformation of the  
products.  
Notice (Other)  
c
Before using trimmer capacitors, please test after  
assembly in your particular mass production system.  
7
• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.  
• This catalog has only tyꢀical sꢀecifications. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.  
!Note  
T13E.ꢀdf  
Aug.10,2012  
Ceramic Trimmer Capacitors  
TZS2 Series  
207  
2
Features  
c
±06  
±02± Depth  
1. Ultra-spall and thin tyꢀe with external dipensions  
of 2.2(W)x2.7(L)x0.95(H)pp  
(30% less in volupe than the current ꢀroduct).  
2. Unique construction with no ꢀlastic paterial  
ꢀrovides suꢀerior soldering heat resistance to  
paintain excellent characteristic ꢀerforpance  
after reflow soldering.  
±04  
3. Pierced square hole allows for high resistance to  
tuning force and in-ꢀrocess autopatic adjustpent.  
Tolerance: ±±0.  
in mm  
Applications  
c
1. °rystal oscillators  
2. °rystal filters  
3. Hand radios  
8. Repote keyless entry systeps  
9. PHS  
10. Radar detectors  
4. °ordless teleꢀhones 11. W-LAN  
5. °ellular teleꢀhones  
6. Tuner ꢀacks  
7. Pagers  
12. °opꢀact radios  
13. Headꢀhone stereos  
C min. (max.)  
C max.  
(pF)  
Part Number  
TC  
Q
Rated Voltage  
Withstanding Voltage  
(pF)  
TZS2Z060A001  
TZS2Z100A001  
TZS2R200A001  
3.0  
3.5  
7.0  
6.0 +100/-0%  
10.0 +100/-0%  
NP0 300ꢀꢀp/ꢁ°  
NP0 300ꢀꢀp/ꢁ°  
N750 500ꢀꢀp/ꢁ°  
500pin. at 1MHz, °pax.  
500pin. at 1MHz, °pax.  
500pin. at 1MHz, °pax.  
25Vdc  
25Vdc  
25Vdc  
55Vdc  
55Vdc  
55Vdc  
20.0 +100/-0%  
Insulation Resistance: 10000M ohp  
Torque: 0.5 to 5.0pNp  
Oꢀerating Tepꢀerature Range: -25 to +85ꢁ°  
Construction  
c
Cover  
Metal Rotor  
Monolithic  
Stator  
8
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Temperature Characteristics  
c
TZS2Z060  
TZS2Z100  
Z100 (NP0±±00 ꢀꢀpm/Cꢁ  
Z060 (NP0±±00 ꢀꢀpm/Cꢁ  
+8  
+6  
+4  
+8  
+6  
+4  
+2  
0
+2  
0
85  
65  
Tepꢀ.(/Cꢁ  
85  
2
–25  
–25  
20  
65  
20  
–2  
–4  
0
0
–2  
–4  
45  
–10  
45  
–10  
Tepꢀ.(/Cꢁ  
–6  
–8  
–6  
–8  
–10  
–10  
–12  
–12  
TZS2R200  
R200 (N750±500 ꢀꢀpm/Cꢁ  
+8  
+6  
+4  
+2  
20  
Tepꢀ.(/Cꢁ  
85  
65  
45  
0
–2  
–25  
–10  
0
–4  
–6  
–8  
–10  
–12  
Frequency Characteristics  
c
TZS2Z060  
TZS2Z100  
Z100  
Z060  
1000  
1000  
1000  
1000  
100  
100  
100  
100  
Q
Q
10  
10  
10  
10  
1
1
200  
400  
600  
800  
1000  
500  
1000  
1500  
2000  
Frequency (MHzꢁ  
Frequency (MHzꢁ  
Continued on the following ꢀage.  
9
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Continued from the preceding page.  
Frequency Characteristics  
c
TZS2R200  
R200  
1000  
1000  
2
100  
Q
100  
10  
10  
1
200  
400  
600  
800  
1000  
Frequency (MHz)  
Land Pattern  
c
3.2  
2.1  
Tolerance: 0.1  
in mm  
Temperature Profile  
c
Reflow Soldering Profile  
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)  
wSoldering profile for Eutectic solder (63Sn/37Pb)  
(Limit profile: refer to q)  
T5  
T3  
T4  
T2  
T3  
T2  
t2  
T1  
t2  
t3  
Limit Profile  
T1  
Standard Profile  
Standard Profile  
t1  
t1  
time (s)  
time (s)  
Standard Profile  
Heating  
Standard Profile  
Heating  
Peak  
temperature  
(T3)  
Peak  
temperature  
(T3)  
Pre-heating  
Pre-heating  
Cycle  
Cycle  
of reflow  
of reflow  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
150 to 180°C 60 to 120sec. 220°C  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
30 to 60sec. 245 3°C  
2 times  
150°C 60 to 120sec. 183°C  
30sec. 230 +5/-0°C 1 time  
Limit Profile  
Heating  
Temp. (T4) Time (t3)  
Peak  
temperature  
(T5)  
Pre-heating  
Temp. (T1) Time (t1)  
Cycle  
of reflow  
150 to 180°C 60 to 120sec. 230°C  
30 to 50sec. 260 +5/-0°C 2 times  
Soldering Iron  
Standard Profile  
Temperature of soldering iron tip  
Soldering time  
Soldering iron power output  
Cycle of soldering iron  
350 10°C  
3sec. max.  
30W max.  
1 time  
10  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Notice (Storage and Operating Conditions)  
c
1. Do not use the trimmer capacitor under atmosphere  
of RTV silicone rubber (Room Temperature  
Vulcanizing Silicone Rubber) except Acetone  
liberating silicone sealant.  
6. Do not use the trimmer capacitor under the  
conditions listed below.  
(1) Corrosive gasses atmosphere  
(ex. Chlorine gas, Hydrogen sulfide gas,  
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,  
etc.)  
2. Before using trimmer capacitors, please store under  
the conditions of -10 to +40°C and 30 to 85%RH.  
3. Do not store in or near corrosive gasses.  
4. Use within 6 months of delivery.  
(2) In liquid (ex. water, oil, medical liquid,  
organic solvent, etc.)  
2
5. Do not store under direct sunlight.  
(3) Dusty / dirty atmosphere  
(4) Direct sunlight  
(5) Static voltage or electric/magnetic fields  
(6) Direct sea breeze  
(7) Other variations of the above  
Notice (Soldering and Mounting)  
c
1. Soldering  
part and/or the contact point. The soldering  
iron should not come in contact with the  
monolithic stator of the trimmer capacitor.  
If such contact does occur, the trimmer  
capacitor may be damaged.  
(1) TZS2 series can be soldered by reflow soldering  
method and soldering iron. Do not use flow  
soldering method (dipping).  
(2) Soldering conditions  
Refer to the temperature profile.  
(6) Our recommended chlorine content of solder is  
as follows.  
If the soldering conditions are not suitable, e.g.,  
excessive time and/or excessive temperature,  
the trimmer capacitor may deviate from the  
specified characteristics.  
(a) Solder paste: 0.2wt% max.  
(b) String solder: 0.5wt% max.  
(7) Do not use water-soluble flux (for water  
cleaning). To prevent the deterioration of  
trimmer capacitor characteristics, apply flux  
only to terminals.  
(3) The amount of solder is critical.  
(4) The thickness of solder paste should be printed  
from 100 micro m to 150 micro m and the dimension  
of land pattern should be Murata's standard land  
pattern used at reflow soldering.  
2. Mounting  
(1) Do not apply excessive force (preferably 5.0 N  
[Ref: 500gf] max.), when the trimmer capacitor  
is mounted on the PCB.  
Insufficient amounts of solder can lead to  
insufficient soldering strength on PCB.  
Excessive amounts of solder may cause bridging  
between the terminals or contact failure due to  
flux wicking up.  
(2) Do not warp and/or bend PCB to protect trimmer  
capacitor from breakage.  
(3) Use a pick-up nozzle of a suitable dimension.  
(1.8mm external diameter and 1.3mm bore diameter.)  
3. Cleaning  
(5) When using soldering iron, the diameter of the  
string solder shall be less than 0.5mm. The  
string solder shall be applied to the lower part  
of the terminal only. Do not apply flux except  
to the terminals. Excessive amounts of solder  
and/or applying solder to the upper part of the  
terminal may cause fixed metal rotor or contact  
failure due to flux invasion into the movable  
This product cannot be cleaned because of open  
construction.  
4. Other  
Note the polarity of the trimmer capacitor to  
minimize influence by stray capacitance.  
(Refer to the dimensions concerning the polarity.)  
Notice (Handling)  
c
1. Use suitable screwdrivers that fit comfortably in  
2. When adjusting with a screwdriver, do not apply  
excessive force (preferably 1.0 N [Ref: 100gf] max.)  
to minimize capacitance drift. Excessive force applied  
to the screwdriver slot may cause deformation of the  
products.  
driver slot.  
(1) Recommended screwdriver for manual adjustment  
MURATA: KMDR050  
(2) Recommended screwdriver bit for automatic  
adjustment  
3. Do not apply adhesive, lock paints, or any other  
substances to the trimmer capacitor to secure the  
rotor position. They may cause corrosion or  
electrical contact problems.  
MURATA: KMBT050  
Notice (Other)  
c
Before using trimmer capacitors, please test after  
assembly in your particular mass production system.  
11  
• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.  
• This catalog has only tyꢀical sꢀecifications. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.  
!Note  
T1±E.ꢀdf  
Aug.10,2012  
Ceramic Trimmer Capacitors  
TZY2 Series  
3.2±±.2  
±.45  
Features  
c
1. Spall and thin size with external dipensions  
of 2.5(W)x±.2(L)x1.25pax.(H)pp.  
2. New shaꢀe of cover can ipꢀrove the flux invasion  
copꢀared with current ꢀroducts.  
±. Ipꢀrovepent of the adhesion between rotor and  
stator leads to suꢀerior stability.  
±
4. Unique construction with no ꢀlastic paterial  
ꢀrovides suꢀerior soldering heat resistance to  
paintain excellent characteristic ꢀerforpance  
after reflow soldering.  
±.5  
Tolerance: ±±.1  
in mm  
(
)
5. Suitable for high frequency circuit due to high  
self-resonant frequency (4.8GHz of TZY2Z010 at  
1.0ꢀF setting).  
Applications  
c
1. °rystal oscillators  
2. °rystal filters  
±. Pagers  
9. Repote keyless entry systeps  
10. W-LAN  
11. Radar detectors  
4. °ordless teleꢀhones 12. °opꢀact radios  
5. PHS  
1±. DVD  
6. Hand radios  
7. °ellular teleꢀhones  
8. Watches  
14. Burglarꢀroof devices  
15. Headꢀhone stereos  
C min. (max.)  
C max.  
(pF)  
Part Number  
TC  
Q
Rated Voltage  
Withstanding Voltage  
(pF)  
TZY2Z010A001  
TZY2Z2R5A001  
TZY2Z030A001  
TZY2Z060A001  
TZY2Z100A001  
TZY2R200A001  
TZY2R250A001  
TZY2K450A001  
0.5  
0.65  
1.5  
2.5  
±.0  
4.5  
5.5  
8.0  
1.0 +100/-0%  
2.5 +100/-0%  
NP0±±00ꢀꢀp/ꢁ°  
NP0±±00ꢀꢀp/ꢁ°  
NP0±±00ꢀꢀp/ꢁ°  
NP0±±00ꢀꢀp/ꢁ°  
NP0±±00ꢀꢀp/ꢁ°  
N750±500ꢀꢀp/ꢁ°  
N750±500ꢀꢀp/ꢁ°  
N1000±500ꢀꢀp/ꢁ°  
200pin. at 200MHz, °pax.  
200pin. at 200MHz, °pax.  
±00pin. at 1MHz, °pax.  
500pin. at 1MHz, °pax.  
500pin. at 1MHz, °pax.  
500pin. at 1MHz, °pax.  
±00pin. at 1MHz, °pax.  
±00pin. at 1MHz, °pax.  
25Vdc  
25Vdc  
25Vdc  
25Vdc  
25Vdc  
25Vdc  
25Vdc  
25Vdc  
55Vdc  
55Vdc  
55Vdc  
55Vdc  
55Vdc  
55Vdc  
55Vdc  
55Vdc  
±.0 +100/-0%  
6.0 +100/-0%  
10.0 +100/-0%  
20.0 +100/-0%  
25.0 +100/-0%  
45.0 +100/-0%  
Torque: 0.5 to 5.0pNp  
Insulation Resistance: 10000M ohp  
Oꢀerating Tepꢀerature Range: -25 to +85ꢁ°  
Construction  
c
Cover  
Metal Rotor  
Monolithic  
Stator  
12  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Temperature Characteristics  
c
TZY2Z010  
TZY2Z100  
Z100 (NP0±±00 ꢀꢀpm/Cꢁ  
Z010 (NP0±±00 ꢀꢀpm/Cꢁ  
+8  
+6  
+4  
+8  
+6  
+4  
+2  
0
Tepꢀ. (/Cꢁ  
85  
+2  
0
Tepꢀ.(/Cꢁ  
85  
65  
-25  
20  
–25  
0
65  
-2  
-4  
20  
-10  
45  
0
–2  
–4  
45  
–10  
-6  
–6  
–8  
-8  
-10  
-12  
–10  
–12  
3
TZY2R200  
TZY2K450  
K450 (N1000±500ꢀꢀpm/Cꢁ  
R200 (N750±500 ꢀꢀpm/Cꢁ  
+12  
+10  
+8  
+6  
+8  
+6  
+4  
+2  
+4  
+2  
20  
Tepꢀ.(/Cꢁ  
85  
65  
Tepꢀ. (/Cꢁ  
85  
45  
45  
20  
65  
0
–2  
–25  
–10  
0
0
0
25  
–2  
–4  
–6  
–4  
–6  
–8  
–8  
–10  
–12  
–10  
–12  
Frequency Characteristics  
c
TZY2Z010  
TZY2Z100  
Z010  
Z100  
1000  
1000  
1000  
100  
100  
100  
Q
Q
0.5ꢀF set  
10  
10  
10  
1.0ꢀF set  
1
1
0
2
4
Frequency (GHzꢁ  
6
8
200  
400  
600  
800  
1000  
Frequency (MHzꢁ  
Continued on the following ꢀage.  
13  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Continued from the preceding page.  
Frequency Characteristics  
c
TZY2R200  
TZY2K450  
R200  
K450  
1000  
1000  
1000  
1000  
100  
10  
1
100  
100  
Q
100  
Q
10  
10  
10  
3
1
200  
400  
600  
800  
1000  
200  
400  
600  
800  
Frequency (MHz)  
Frequency (MHz)  
Land Pattern  
c
4.0  
2.4  
Tolerance: 0.1  
in mm  
Temperature Profile  
c
Reflow Soldering Profile  
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)  
wSoldering profile for Eutectic solder (63Sn/37Pb)  
(Limit profile: refer to q)  
T5  
T3  
T4  
T2  
T3  
T2  
t2  
T1  
t2  
t3  
Limit Profile  
T1  
Standard Profile  
Standard Profile  
t1  
t1  
time (s)  
time (s)  
Standard Profile  
Heating  
Standard Profile  
Heating  
Peak  
temperature  
(T3)  
Peak  
temperature  
(T3)  
Pre-heating  
Pre-heating  
Cycle  
Cycle  
of reflow  
of reflow  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
150 to 180°C 60 to 120sec. 220°C  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
30 to 60sec. 245 3°C  
2 times  
150°C 60 to 120sec. 183°C  
30sec. 230 +5/-0°C 1 time  
Limit Profile  
Heating  
Temp. (T4) Time (t3)  
Peak  
temperature  
(T5)  
Pre-heating  
Temp. (T1) Time (t1)  
Cycle  
of reflow  
150 to 180°C 60 to 120sec. 230°C  
30 to 50sec. 260 +5/-0°C 2 times  
Soldering Iron  
Standard Profile  
Temperature of soldering iron tip  
Soldering time  
Soldering iron power output  
Cycle of soldering iron  
350 10°C  
3sec. max.  
30W max.  
1 time  
14  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Notice (Storage and Operating Conditions)  
c
1. Do not use the trimmer capacitor under atmosphere  
of RTV silicone rubber (Room Temperature  
Vulcanizing Silicone Rubber) except Acetone  
liberating silicone sealant.  
6. Do not use the trimmer capacitor under the  
conditions listed below.  
(1) Corrosive gasses atmosphere  
(ex. Chlorine gas, Hydrogen sulfide gas,  
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,  
etc.)  
2. Before using trimmer capacitors, please store under  
the conditions of -10 to +40°C and 30 to 85%RH.  
3. Do not store in or near corrosive gasses.  
4. Use within 6 months of delivery.  
(2) In liquid (ex. water, oil, medical liquid,  
organic solvent, etc.)  
5. Do not store under direct sunlight.  
(3) Dusty / dirty atmosphere  
(4) Direct sunlight  
(5) Static voltage or electric/magnetic fields  
(6) Direct sea breeze  
(7) Other variations of the above  
3
Notice (Soldering and Mounting)  
c
1. Soldering  
the movable part and/or the contact point. The  
soldering iron should not come in contact with  
the monolithic stator of the trimmer capacitor.  
If such contact does occur, the trimmer  
capacitor may be damaged.  
(1) TZY2 series can be soldered by reflow soldering  
method and soldering iron. Do not use flow  
soldering method (dipping).  
(2) Soldering conditions  
Refer to the temperature profile.  
(6) Our recommended chlorine content of solder is  
as follows.  
If the soldering conditions are not suitable, e.g.,  
excessive time and/or excessive temperature, the  
trimmer capacitor may deviate from the specified  
characteristics.  
(a) Solder paste: 0.2wt% max.  
(b) String solder: 0.5wt% max.  
(7) Do not use water-soluble flux (for water  
cleaning). To prevent the deterioration of  
trimmer capacitor characteristics, apply flux  
only to terminals.  
(3) The amount of solder is critical.  
(4) The thickness of solder paste should be printed  
from 120 micro m to 170 micro m and the dimension  
of land pattern should be Murata's standard land  
pattern used at reflow soldering.  
2. Mounting  
(1) Do not apply excessive force (preferably 5.0 N  
[Ref: 500gf] max.), when the trimmer capacitor  
is mounted on the PCB.  
Insufficient amounts of solder can lead to  
insufficient soldering strength on PCB.  
Excessive amounts of solder may cause bridging  
between the terminals or contact failure due to  
flux wicking up.  
(2) Do not warp and/or bend PCB to protect trimmer  
capacitor from breakage.  
(3) Use a pick-up nozzle of a suitable dimension.  
(1.8mm external diameter and 1.3mm bore diameter.)  
3. Cleaning  
(5) When using soldering iron, the diameter of the  
string solder shall be less than 0.5mm. The  
string solder shall be applied to the lower  
part of the terminal only. Do not apply flux  
except to the terminals. Excessive amounts of  
solder and/or applying solder to the upper part  
of the terminal may cause fixed metal rotor or  
contact failure due to flux invasion into  
This product cannot be cleaned because of open  
construction.  
4. Other  
Note the polarity of the trimmer capacitor to  
minimize influence by stray capacitance.  
(Refer to the dimensions concerning the polarity.)  
Notice (Handling)  
c
1. Use suitable screwdrivers that fit comfortably in  
2. When adjusting with a screwdriver, do not apply  
excessive force (preferably 1.0 N [Ref: 100gf] max.)  
to minimize capacitance drift. Excessive force applied  
to the screwdriver slot may cause deformation of the  
products.  
driver slot.  
(1) Recommended screwdriver for manual adjustment  
ENGINEER INC.: DA-89  
(Murata P/N is KMDR060)  
(2) Recommended screwdriver bit for automatic  
adjustment  
3. Do not apply adhesive, lock paints, or any other  
substances to the trimmer capacitor to secure the  
rotor position. They may cause corrosion or  
electrical contact problems.  
MURATA: KMBT060  
Notice (Other)  
c
Before using trimmer capacitors, please test after  
assembly in your particular mass production system.  
15  
• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.  
• This catalog has only tyꢀical sꢀecifications. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.  
!Note  
T1±E.ꢀdf  
Aug.10,2012  
Ceramic Trimmer Capacitors  
TZV2 Series  
3.2±±.2  
±.5 Depth ±.2  
Features  
c
1. Spall size with external dipensions of  
2.±(W)x±.2(L)x1.45pax.(H)pp.  
2. Unique construction with no ꢀlastic paterial  
ꢀrovides suꢀerior soldering heat resistance to  
paintain excellent characteristic ꢀerforpance after  
reflow soldering.  
Marking(6pF)  
Marking(1±pF)  
±. Designed for autopatic ꢀlacepent in surface pount  
aꢀꢀlications.  
4. Funnel shaꢀed petal case enables in-ꢀrocess  
autopatic adjustpent.  
Tolerance: ±±.1  
in mm  
Applications  
1. °rystal oscillator  
c
4
9. PHS  
2. °rystal filters  
10. Radar detectors  
11. W-LAN  
±. Hand radios  
4. °ordless teleꢀhones  
5. °ellular teleꢀhones  
6. Tuner ꢀacks  
12. °opꢀact radios  
1±. Headꢀhone stereos  
14. DVD  
7. Pagers  
15. Burglarꢀroof devices  
8. Repote keyless entry systeps  
C min. (max.)  
C max.  
TC  
Part Number  
(pF)  
Q
Rated Voltage  
Withstanding Voltage  
(pF)  
TZV2Z2R5A110  
TZV2Z030A110  
TZV2Z060A110  
TZV2Z100A110  
TZV2R200A110  
0.65  
1.5  
2.5  
±.0  
4.5  
2.5 +100/-0%  
±.0 +100/-0%  
NP0±±00ꢀꢀp/ꢁ°  
200pin. at 200MHz, °pax.  
±00pin. at 1MHz, °pax.  
500pin. at 1MHz, °pax.  
500pin. at 1MHz, °pax.  
500pin. at 1MHz, °pax.  
25Vdc  
25Vdc  
25Vdc  
25Vdc  
25Vdc  
55Vdc  
55Vdc  
55Vdc  
55Vdc  
55Vdc  
NP0±±00ꢀꢀp/ꢁ°  
NP0±±00ꢀꢀp/ꢁ°  
NP0±±00ꢀꢀp/ꢁ°  
N750±500ꢀꢀp/ꢁ°  
6.0 +100/-0%  
10.0 +100/-0%  
20.0 +100/-0%  
Torque: 1.0 to 9.8pNp  
Insulation Resistance: 10000M ohp  
Oꢀerating Tepꢀerature Range: -25 to +85ꢁ°  
Construction  
c
Cover  
Spring Washer  
Metal Rotor  
Monolithic Stator  
16  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Temperature Characteristics  
c
TZV2Z2R5  
TZV2Z060  
Z2R5 (NP0±±00 ppꢀm/Cꢁ  
Z060 (NP0±±00 ppꢀm/Cꢁ  
+8  
+6  
+4  
+8  
+6  
+4  
+2  
0
Teꢀp.(/Cꢁ  
85  
+2  
0
85  
65  
–25  
65  
20  
–2  
0
–25  
20  
45  
–10  
–2  
–4  
0
45  
–10  
–4  
Teꢀp.(/Cꢁ  
–6  
–8  
–6  
–8  
–10  
–10  
–12  
–12  
TZV2Z100  
TZV2R200  
R200 (N750±500 ppꢀm/Cꢁ  
Z100 (NP0±±00 ppꢀm/Cꢁ  
+8  
+6  
+8  
+6  
+4  
4
+4  
+2  
20  
Teꢀp.(/Cꢁ  
85  
65  
+2  
0
45  
Teꢀp.(/Cꢁ  
85  
0
–2  
–25  
–10  
0
–25  
65  
20  
0
–2  
–4  
45  
–10  
–4  
–6  
–8  
–6  
–8  
–10  
–10  
–12  
–12  
Frequency Characteristics  
c
TZV2Z2R5  
TZV2Z060  
Z060  
Z2R5  
1000  
1000  
1000  
100  
10  
1000  
100  
100  
100  
Q
Q
10  
10  
10  
1
1
500  
1000  
1500  
2000  
500  
1000  
1500  
2000  
2500  
±000  
Frequency (MHzꢁ  
Frequency (MHzꢁ  
Continued on the following page.  
17  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Continued from the preceding page.  
Frequency Characteristics  
c
TZV2Z100  
TZV2R200  
R200  
Z100  
1000  
1000  
1000  
1000  
100  
100  
100  
100  
Q
Q
10  
10  
10  
10  
1
1
200  
400  
600  
800  
1000  
200  
400  
600  
800  
1000  
Frequency (MHz)  
Frequency (MHz)  
4
Land Pattern  
c
4.0  
2.4  
Tolerance: 0.1  
in mm  
Temperature Profile  
c
Reflow Soldering Profile  
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)  
wSoldering profile for Eutectic solder (63Sn/37Pb)  
(Limit profile: refer to q)  
T5  
T3  
T4  
T2  
T3  
T2  
t2  
T1  
t2  
t3  
Limit Profile  
T1  
Standard Profile  
Standard Profile  
t1  
t1  
time (s)  
time (s)  
Standard Profile  
Heating  
Standard Profile  
Heating  
Peak  
temperature  
(T3)  
Peak  
temperature  
(T3)  
Pre-heating  
Pre-heating  
Cycle  
Cycle  
of reflow  
of reflow  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
150 to 180°C 60 to 120sec. 220°C  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
30 to 60sec. 245 3°C  
2 times  
150°C 60 to 120sec. 183°C  
30sec. 230 +5/-0°C 1 time  
Limit Profile  
Heating  
Temp. (T4) Time (t3)  
Peak  
temperature  
(T5)  
Pre-heating  
Temp. (T1) Time (t1)  
Cycle  
of reflow  
150 to 180°C 60 to 120sec. 230°C  
30 to 50sec. 260 +5/-0°C 2 times  
Soldering Iron  
Standard Profile  
Temperature of soldering iron tip  
Soldering time  
Soldering iron power output  
Cycle of soldering iron  
350 10°C  
3sec. max.  
30W max.  
1 time  
18  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Notice (Storage and Operating Conditions)  
c
1. Do not use the trimmer capacitor under atmosphere  
of RTV silicone rubber (Room Temperature  
Vulcanizing Silicone Rubber) except Acetone  
liberating silicone sealant.  
6. Do not use the trimmer capacitor under the  
conditions listed below.  
(1) Corrosive gasses atmosphere  
(ex. Chlorine gas, Hydrogen sulfide gas,  
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,  
etc.)  
2. Before using trimmer capacitors, please store under  
the conditions of -10 to +40°C and 30 to 85%RH.  
3. Do not store in or near corrosive gasses.  
4. Use within 6 months of delivery.  
(2) In liquid (ex. water, oil, medical liquid,  
organic solvent, etc.)  
5. Do not store under direct sunlight.  
(3) Dusty / dirty atmosphere  
(4) Direct sunlight  
(5) Static voltage or electric/magnetic fields  
(6) Direct sea breeze  
(7) Other variations of the above  
Notice (Soldering and Mounting)  
c
1. Soldering  
the movable part and/or the contact point. The  
soldering iron should not come in contact with  
the monolithic stator of the trimmer capacitor.  
If such contact does occur, the trimmer  
capacitor may be damaged.  
(1) TZV2 series can be soldered by reflow soldering  
method and soldering iron. Do not use flow  
soldering method (dipping).  
4
(2) Soldering conditions  
Refer to the temperature profile.  
(6) Our recommended chlorine content of solder is  
as follows.  
If the soldering conditions are not suitable, e.g.,  
excessive time and/or excessive temperature, the  
trimmer capacitor may deviate from the specified  
characteristics.  
(a) Solder paste: 0.2wt% max.  
(b) String solder: 0.5wt% max.  
(7) Do not use water-soluble flux (for water  
cleaning). To prevent the deterioration of  
trimmer capacitor characteristics, apply flux  
only to terminals.  
(3) The amount of solder is critical.  
(4) The thickness of solder paste should be printed  
from 120 micro m to 170 micro m and the dimension  
of land pattern should be Murata's standard land  
pattern used at reflow soldering.  
2. Mounting  
(1) Do not apply excessive force (preferably 5.0 N  
[Ref: 500gf] max.), when the trimmer capacitor  
is mounted on the PCB.  
Insufficient amounts of solder can lead to  
insufficient soldering strength on PCB.  
Excessive amounts of solder may cause  
bridging between the terminals or contact  
failure due to flux wicking up.  
(2) Do not warp and/or bend PCB to protect trimmer  
capacitor from breakage.  
(3) Use a pick-up nozzle of a suitable dimension.  
(1.8mm external diameter and 1.3mm bore diameter.)  
3. Cleaning  
(5) When using soldering iron, the diameter of the  
string solder shall be less than 0.5mm. The  
string solder shall be applied to the lower  
part of the terminal only. Do not apply flux  
except to the terminals. Excessive amounts of  
solder and/or applying solder to the upper part  
of the terminal may cause fixed metal rotor or  
contact failure due to flux invasion into  
This product cannot be cleaned because of open  
construction.  
4. Other  
Note the polarity of the trimmer capacitor to  
minimize influence by stray capacitance.  
(Refer to the dimensions concerning the polarity.)  
Notice (Handling)  
c
1. Use suitable screwdrivers that fit comfortably in  
2. When adjusting with a screwdriver, do not apply  
excessive force (preferably 1.0 N [Ref: 100gf] max.)  
to minimize capacitance drift. Excessive force applied  
to the screwdriver slot may cause deformation of the  
products.  
driver slot.  
(1) Recommended screwdriver for manual adjustment  
VESSEL: No.9000 -0.9x30  
(Murata P/N : KMDR020)  
(2) Recommended screwdriver bit for automatic  
adjustment  
3. Do not apply adhesive, lock paints, or any other  
substances to the trimmer capacitor to secure the  
rotor position. They may cause corrosion or  
electrical contact problems.  
MURATA: KMBT020  
Notice (Other)  
c
Before using trimmer capacitors, please test after  
assembly in your particular mass production system.  
19  
• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.  
• This catalog has only tyꢀical sꢀecifications. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.  
!Note  
T13E.ꢀdf  
Aug.10,2012  
Ceramic Trimmer Capacitors  
TZC3 Series  
Features  
c
1. Spall size with external dipension of  
3.2(W)x4.5(L)x1.6(H)pp.  
0.5  
2.5 dia.  
2. °olor coded stator ꢀerpits easy identification of  
caꢀacitance and reduces pounting errors.  
3. °an be adjusted with conventional adjustpent tools  
having a thickness of 0.5pp.  
4.5  
4. Designed for autopatic ꢀlacepent in surface pount  
aꢀꢀlications.  
4.5  
5. Heat resistant resin withstands reflow soldering  
tepꢀeratures.  
Tolerance: 0.1  
in mm  
0.6  
0.6  
Applications  
c
1. °opꢀact radios  
2. Headꢀhones  
3. Pagers  
4. Portable radio equiꢀpent  
5. Hybrid I°s  
6. °ellular teleꢀhones  
7. °ordless teleꢀhones  
8. Repote keyless entry systeps  
5
C min. (max.)  
(pF)  
C max.  
(pF)  
Part Number  
TC  
Q
Rated Voltage Withstanding Voltage Stator/Case Color  
TZC3Z030A110  
TZC3Z060A110  
TZC3R100A110  
TZC3P200A110  
TZC3P300A110  
1.4  
2.0  
3.0  
5.0  
6.5  
3.0 +50/-0% NP0 300ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.  
6.0 +50/-0% NP0 300ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.  
10.0 +50/-0% N750 300ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.  
20.0 +50/-0% N1200 500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.  
30.0 +50/-0% N1200 500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.  
100Vdc  
100Vdc  
100Vdc  
100Vdc  
100Vdc  
220Vdc  
220Vdc  
220Vdc  
220Vdc  
220Vdc  
Brown  
Blue  
White  
Red  
Green  
Insulation Resistance: 10000M ohp  
Torque: 1.5 to 9.8pNp  
Oꢀerating Tepꢀerature Range: -25 to +85ꢁ°  
Construction  
c
Center axis  
Rotor spring terminal  
Ceramic plate  
Stator  
(One molded injection  
with stator terminal)  
Stator terminal  
20  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Temperature Characteristics  
c
TZC3Z030  
TZC3Z060  
Z060 (NP0 300 ppmꢀ°C)  
Z030 (NP0 300 ppmꢀ°C)  
+8  
+6  
+4  
+8  
+6  
+4  
Temp.(°C)  
85  
Temp.(°C)  
85  
+2  
0
+2  
0
20  
20  
0
45  
0
45  
–10  
–10  
–2  
–4  
–2  
–4  
65  
–25  
65  
–25  
–6  
–8  
–6  
–8  
–10  
–10  
–12  
–12  
TZC3R100  
TZC3P200  
R100 (N750 300 ppmꢀ°C)  
P200 (N1200 500ppmꢀ°C)  
+8  
+6  
+4  
+2  
+8  
+6  
+4  
+2  
65  
45  
0
85  
85  
45  
65  
0
20  
–2  
20  
–2  
–25  
Temp.(°C)  
–10  
0
–25  
–10  
0
Temp.(°C)  
–4  
–4  
–6  
–8  
–6  
–8  
–10  
–10  
–12  
–12  
5
Frequency Characteristics  
c
TZC3Z030  
TZC3Z060  
Z030  
Z060  
1000  
1000  
1000  
1000  
100  
100  
Q
100  
100  
Q
10  
10  
10  
10  
1
1
100  
500  
1000  
1500  
2000  
100  
500  
1000  
1500  
2000  
Frequency (MHz)  
Frequency (MHz)  
Continued on the following page.  
21  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Continued from the preceding page.  
Frequency Characteristics  
c
TZC3R100  
TZC3P200  
R100  
P200  
1000  
1000  
100  
10  
1000  
1000  
Q
Q
100  
100  
100  
10  
10  
10  
1
1
200  
400  
600  
800  
1000  
200  
400  
600  
800  
1000  
Frequency (MHz)  
Frequency (MHz)  
Land Pattern  
c
+0  
5.0  
–0.5  
3.3 0.1  
5
Tolerance: 0.1  
in mm  
Temperature Profile  
c
Reflow Soldering Profile  
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)  
wSoldering profile for Eutectic solder (63Sn/37Pb)  
(Limit profile: refer to q)  
T5  
T3  
T4  
T2  
T3  
T2  
t2  
T1  
t2  
t3  
Limit Profile  
T1  
Standard Profile  
Standard Profile  
t1  
t1  
time (s)  
time (s)  
Standard Profile  
Heating  
Standard Profile  
Heating  
Peak  
temperature  
(T3)  
Peak  
temperature  
(T3)  
Pre-heating  
Pre-heating  
Cycle  
Cycle  
of reflow  
of reflow  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
150 to 180°C 60 to 120sec. 220°C  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
30 to 60sec. 245 3°C  
2 times  
150°C 60 to 120sec. 183°C  
30sec. 230 +5/-0°C 1 time  
Limit Profile  
Heating  
Temp. (T4) Time (t3)  
Peak  
temperature  
(T5)  
Pre-heating  
Temp. (T1) Time (t1)  
Cycle  
of reflow  
150 to 180°C 60 to 120sec. 230°C  
30 to 50sec. 260 +5/-0°C 2 times  
Soldering Iron  
Standard Profile  
Temperature of soldering iron tip  
Soldering time  
Soldering iron power output  
Cycle of soldering iron  
350 10°C  
3sec. max.  
30W max.  
1 time  
22  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Notice (Storage and Operating Conditions)  
c
1. Do not use the trimmer capacitor under atmosphere  
of RTV silicone rubber (Room Temperature  
Vulcanizing Silicone Rubber) except Acetone  
liberating silicone sealant.  
6. Do not use the trimmer capacitor under the  
conditions listed below.  
(1) Corrosive gasses atmosphere  
(ex. Chlorine gas, Hydrogen sulfide gas,  
Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.)  
(2) In liquid (ex. water, oil, medical liquid,  
organic solvent, etc.)  
2. Before using trimmer capacitors, please store under  
the conditions of -10 to +40°C and 30 to 85%RH.  
3. Do not store in or near corrosive gasses.  
4. Use within 6 months of delivery.  
(3) Dusty / dirty atmosphere  
5. Do not store under direct sunlight.  
(4) Direct sunlight  
(5) Static voltage or electric/magnetic fields  
(6) Direct sea breeze  
(7) Other variations of the above  
Notice (Soldering and Mounting)  
c
1. Soldering  
soldering iron should not come in contact with  
(1) TZC3 series can be soldered by reflow soldering  
method and soldering iron. Do not use flow  
soldering method (dipping).  
the stator of the trimmer capacitor. If such contact does  
occur, the trimmer capacitor may be damaged.  
(6) Our recommended chlorine content of solder is  
as follows.  
(2) Soldering conditions  
Refer to the temperature profile.  
(a) Solder paste: 0.2wt% max.  
If the soldering conditions are not suitable, e.g.,  
excessive time and/or excessive temperature, the  
trimmer capacitor may deviate from the specified  
characteristics.  
(b) String solder: 0.5wt% max.  
(7) Do not use water-soluble flux (for water cleaning).  
To prevent the deterioration of trimmer capacitor  
characteristics, apply flux only to terminals.  
(8) When soldering the TZC3 series, the solder  
should not flow into the staking part of the  
substrate. If such flow does occur, driver slot  
rotation will be damaged.  
(3) The amount of solder is critical.  
5
(4) The thickness of solder paste should be printed  
from 150 micro m to 200 micro m and the dimension  
of land pattern should be Murata's standard land  
pattern used at reflow soldering.  
2. Mounting  
Insufficient amounts of solder can lead to  
insufficient soldering strength on PCB.  
Excessive amounts of solder may cause bridging  
between the terminals or contact failure due to  
flux wicking up.  
(1) Do not apply excessive force (preferably 5.0 N  
[Ref: 500gf] max.), when the trimmer capacitor  
is mounted on the PCB.  
(2) Do not warp and/or bend PCB to protect trimmer  
capacitor from breakage.  
(5) When using soldering iron, the diameter of the  
string solder shall be less than 0.5mm. The  
string solder shall be applied to the lower  
part of the terminal only. Do not apply flux  
except to the terminals. Excessive amounts of  
solder and/or applying solder to the upper part  
of the terminal may cause fixed metal rotor or  
contact failure due to flux invasion into the  
movable part and/or the contact point. The  
(3) Use a pick-up nozzle of a suitable dimension.  
(2.5mm external diameter and 1.5mm bore diameter.)  
3. Cleaning  
This product cannot be cleaned because of open  
construction.  
4. Other  
Note the polarity of the trimmer capacitor to  
minimize influence by stray capacitance.  
(Refer to the dimensions concerning the polarity.)  
Notice (Handling)  
c
1. Use suitable screwdrivers that fit comfortably in driver slot.  
(1) Recommended screwdriver for manual adjustment  
Standard type --> MURATA: KMDR010  
Cross slot type --> VESSEL: NO.9000+1.7×30  
(Murata P/N is KMDR080)  
2. When adjusting with a screwdriver, do not apply  
excessive force (preferably 1.0 N [Ref: 100gf] max.)  
to minimize capacitance drift. Excessive force applied  
to the screwdriver slot may cause deformation of the  
products.  
(2) Recommended screwdriver bit for automatic adjustment  
Standard type --> MURATA: KMBT010  
Cross slot type --> VESSEL: No.CA-11  
3. Do not apply adhesive, lock paints, or any other  
substances to the trimmer capacitor to secure the  
rotor position. They may cause corrosion or  
electrical contact problems.  
(Murata P/N is KMBT080)  
Notice (Other)  
c
Before using trimmer capacitors, please test after  
assembly in your particular mass production system.  
23  
• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.  
• This catalog has only tyꢀical sꢀecifications. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.  
!Note  
T13E.ꢀdf  
Aug.10,2012  
Ceramic Trimmer Capacitors  
TZW4 Series  
5.2±±.2  
Features  
c
ꢀ.6  
±.4 Depth  
1. To peet high ꢀower aꢀꢀlication due to withstanding  
voltage 550Vdc.  
2. Extrepely high self-resonant frequency.  
(More than 3GHz at rated °pax.)  
3. Tyꢀical aꢀꢀlication: Ipꢀedance patching for °ellular  
Base Station.  
3.±  
2.2  
4. High Q value in pore than VHF, UHF and Microwave  
bands.  
(More than 200 in 500MHz, ° pax.)  
5. Available for ꢀick and ꢀlace pachine. Possible  
thinner design due to 2.6pp low ꢀrofile.  
6. Non-electrical contact construction  
(rotor as piddle electrode) ꢀrovides high reliability.  
7. °opꢀact size: 4.2(W)x5.2(L)x2.6pax.(H)pp.  
+±.ꢀ  
Tolerance: ±±.ꢀ  
±.3  
-±.2  
(
)
in mm  
Applications  
c
1. Transpitting ꢀower apꢀlifier for °ellular base station  
2. Transpitting apꢀlifier for PHS base station  
3. High frequency electric circuit  
4. High ꢀower radio transpission  
5. Transꢀonder apꢀlifier for cable TV  
C min. (max.)  
(pF)  
C max.  
(pF)  
Part Number  
TC  
Q
Rated Voltage  
Withstanding Voltage  
TZW4Z010A001  
0.4  
0.4  
1.0 +50/-0%  
NP0 150ꢀꢀp/ꢁ°  
NP0 150ꢀꢀp/ꢁ°  
200pin. at 500MHz, °pax.  
200pin. at 500MHz, °pax.  
250Vdc  
250Vdc  
550Vdc  
550Vdc  
6
TZW4Z1R5A001  
1.5 +100/-0%  
Insulation Resistance: 10000M ohp  
Torque: 1.5 to 10.0pNp  
Oꢀerating Tepꢀerature Range: -55 to +125ꢁ°  
Construction  
c
Cover  
Metal Rotor  
Monolithic  
Stator  
24  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Temperature Characteristics  
Frequency Characteristics  
c
c
TZW4Z1R5  
TZW4Z1R5  
Z1R5 (NP0 150 ꢀꢀpm/Cꢁ  
Z1R5  
+8  
+6  
+4  
1000  
+2  
Tepꢀ. (/Cꢁ  
0
20  
105  
125  
1.5ꢀF set  
45  
65  
–55  
–25  
–10  
0
85  
–2  
100  
–4  
–6  
–8  
Q
–10  
–12  
10  
1
500  
1000  
1500  
2000  
2500  
3000  
Frequency (MHzꢁ  
Land Pattern  
c
7.0  
4.4  
Tolerance: 0.1  
in pp  
6
Temperature Profile  
c
Reflow Soldering Profile  
qSoldering ꢀrofile for Lead-free solder (96.5Snm3Agm0.5Cuꢁ  
wSoldering ꢀrofile for Eutectic solder (63Snm37Pbꢁ  
(Lipit ꢀrofile: refer to qꢁ  
T5  
T3  
T4  
T2  
T3  
T2  
t2  
T1  
t2  
t3  
Lipit Profile  
T1  
Standard Profile  
Standard Profile  
t1  
t1  
tipe (sꢁ  
tipe (sꢁ  
Standard Profile  
Heating  
Standard Profile  
Heating  
Peak  
temperature  
(T3)  
Peak  
temperature  
(T3)  
Pre-heating  
Pre-heating  
Cycle  
Cycle  
of reflow  
of reflow  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
150 to 180/C 60 to 120sec. 220/C  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
30 to 60sec. 245 3/C  
2 tipes  
150/C 60 to 120sec. 183/C  
30sec. 230 +5m-0/C 1 tipe  
Limit Profile  
Heating  
Temp. (T4) Time (t3)  
Peak  
temperature  
(T5)  
Pre-heating  
Temp. (T1) Time (t1)  
Cycle  
of reflow  
150 to 180/C 60 to 120sec. 230/C  
30 to 50sec. 260 +5m-0/C 2 tipes  
Soldering Iron  
Standard Profile  
Temperature of soldering iron tip  
Soldering time  
Soldering iron power output  
Cycle of soldering iron  
350 10/C  
3sec. pax.  
30W pax.  
1 tipe  
25  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Notice (Storage and Operating Conditions)  
c
1. Do not use the trimmer capacitor under atmosphere  
of RTV silicone rubber (Room Temperature  
Vulcanizing Silicone Rubber) except Acetone  
liberating silicone sealant.  
6. Do not use the trimmer capacitor under the  
conditions listed below.  
(1) Corrosive gasses atmosphere  
(Ex. Chlorine gas, Hydrogen sulfide gas,  
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,  
etc.)  
2. Before using trimmer capacitors, please store under  
the conditions of -10 to +40°C and 30 to 85%RH.  
3. Do not store in or near corrosive gasses.  
4. Use within 6 months of delivery.  
(2) In liquid (Ex. water, oil, medical liquid,  
organic solvent, etc.)  
5. Do not store under direct sunlight.  
(3) Dusty/dirty atmosphere  
(4) Direct sunlight  
(5) Static voltage or electric/magnetic fields  
(6) Direct sea breeze  
(7) Other variations of the above  
Notice (Soldering and Mounting)  
c
1. Soldering  
the contact failure due to flux invasion into  
the movable part and/or the contact point. The  
soldering iron should not come in contact with  
the monolithic stator of the trimmer capacitor.  
If such contact does occur, the trimmer  
capacitor may be damaged.  
(1) TZW4 series can be soldered by reflow soldering  
method and soldering iron. Do not use flow  
soldering method (dipping).  
(2) Soldering conditions  
Refer to the temperature profile.  
If the soldering conditions are not suitable, e.g.,  
excessive time and/or excessive temperature, the  
trimmer capacitor may deviate from the specified  
characteristics.  
(6) Our recommended chlorine content of solder is  
as follows.  
(a) Solder paste: 0.2wt% max.  
(b) String solder: 0.5wt% max.  
(3) The amount of solder is critical.  
(7) Do not use water-soluble flux (for water  
cleaning). To prevent the deterioration of  
trimmer capacitor characteristics, apply flux  
only to terminals.  
(4) The thickness of solder paste should be printed  
from 150 micro m to 200 micro m and the dimension  
of land pattern should be Murata's standard land  
pattern used at reflow soldering.  
2. Mounting  
Insufficient amounts of solder can lead to  
insufficient soldering strength on PCB.  
Excessive amounts of solder may cause bridging  
between the terminals or contact failure due to  
flux wicking up.  
(1) Do not apply excessive force (preferably 5.0 N  
[Ref: 500gf] max.), when the trimmer capacitor  
is mounted on the PCB.  
6
(2) Do not warp and/or bend PCB to protect trimmer  
capacitor from breaking.  
(5) When using soldering iron, the diameter of the  
string solder shall be less than 0.5mm. The  
string solder shall be applied to the lower  
part of the terminal only. Do not apply flux  
except to the terminals. Excessive amounts of  
solder and/or applying solder to the upper part  
of the terminal may cause fixed metal rotor or  
(3) Use a pick-up nozzle of a suitable dimension.  
(1.8mm external diameter and 1.1mm bore  
diameter.)  
3. Cleaning  
This product cannot be cleaned because of open  
construction.  
Notice (Handling)  
c
1. Use suitable screwdrivers that fit comfortably in  
3. Do not apply adhesive, lock paints, or any other  
substances to the trimmer capacitor to secure the  
rotor position. They may cause corrosion or  
electrical contact problems.  
driver slot.  
-Recommended screwdriver for manual adjustment  
VESSEL : No.9000 -1.3x30  
(Murata P/N is KMDR130)  
2. When adjusting with a screwdriver, do not apply  
excessive force (preferably 1.0 N [Ref: 100gf] max.)  
to minimize capacitance drift. Excessive force applied  
to the screwdriver slot may cause deformation of the  
products.  
Notice (Other)  
c
Before using trimmer capacitors, please test after  
assembly in your particular mass production system.  
26  
• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.  
• This catalog has only tyꢀical sꢀecifications. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.  
!Note  
T13E.ꢀdf  
Aug.10,±01±  
Ceramic Trimmer Capacitors  
TZB4 Series  
0.6 0.ꢀ1 Dept10.ꢁ  
ꢀ.4 0.ꢀ1ꢂdi.  
Features  
c
1. Miniature rectangular shaꢀe:  
4.0(W)x4.5(L)x3.0(H)pp.  
±. °olor coded case facilitates identification of  
caꢀacitance range.  
4.ꢁ 0.2  
3. Designed for autopatic ꢀlacepent in surface pount  
aꢀꢀlications.  
2.7 0.ꢃ  
ꢀ.2 0.ꢀ  
4. Designed to withstand flux baths and solder baths  
(with cover filp tyꢀe).  
A Type  
B Type  
E Type  
5. °an be tepꢀorarily attached to P°B with adhesives  
(Terpinal style A and B).  
TolDrincD:1 0.ꢁ  
dn1mm  
ꢁ.0  
6. °an be reflow and flow (with cover filp tyꢀe)  
soldering pethod.  
0.6 0.ꢀ1 Dept10.ꢁ  
ꢀ.4 0.ꢀ1ꢂdi.  
7. Stable characteristics over a wide frequency range.  
(Resonant frequency: 1000MHz pin. / 6ꢀF)  
Applications  
c
4.ꢁ 0.2  
1. °ar audio systeps  
±. °ordless teleꢀhones  
3. Hybrid I°s  
4. Pagers  
ꢀ.2 0.ꢀ  
5. Repote keyless entry systeps  
6. Tuner ꢀacks  
TolDrincD:1 0.ꢁ  
dn1mm  
7. Surveillance caperas  
8. DVD  
7.0  
9. Burglarꢀroof devices  
0.6 0.ꢀ1 Dept10.ꢁ  
4.ꢁ 0.2  
7.0  
4.8  
4.0 0.2  
7
4.ꢁ  
TolDrincD:1 0.ꢁ  
dn1mm  
C min. (max.)  
(pF)  
C max.  
(pF)  
Part Number  
TC  
Q
Rated Voltage Withstanding Voltage Stator/Case Color  
TZB4Z030  
TZB4Z060  
TZB4Z100  
10  
10  
10  
1.4  
±.0  
3.0  
4.5  
6.5  
8.5  
4.0  
7.0  
3.0 +50/-0%  
6.0 +50/-0%  
10.0 +50/-0%  
±0.0 +50/-0%  
NP0±±00ꢀꢀp/ꢁ°  
300pin. at 1MHz, °pax  
100Vdc  
100Vdc  
100Vdc  
100Vdc  
100Vdc  
100Vdc  
50Vdc  
±±0Vdc  
±±0Vdc  
±±0Vdc  
±±0Vdc  
±±0Vdc  
±±0Vdc  
110Vdc  
110Vdc  
Brown  
Blue  
pp  
pp  
pp  
NP0±±00ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.  
NP0±300ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.  
N750±400ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax  
White  
TZB4R200  
TZB4P300  
TZB4P400  
10  
10  
10  
Red  
pp  
pp  
pp  
30.0 +50/-0% N1±00±500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax  
40.0 +50/-0% N1±00±500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax  
Green  
Yellow  
TZB4Z250  
10  
pp  
±5.0 +100/-0%  
50.0 +100/-0% N750±300ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax  
Torque: 1.5 to 9.8pNp Oꢀerating Tepꢀerature Range: -±5 to +85ꢁ°  
Second blank: °over filp codes (A: not ꢀrovided, B: ꢀrovided)  
ex. TZB4Z100AB10: Terpinal Tyꢀe is A, and °over filp is ꢀrovided.  
NP0±300ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.  
Black+Marking  
Black+Marking  
TZB4R500  
10  
pp  
50Vdc  
Insulation Resistance: 10000M ohp  
First blank: Terpinal Tyꢀe  
±7  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Construction  
c
Cover Film (Cover film type)  
Rotor Spring  
Plastic Case  
–
Metal Rotor  
Ceramic Plate  
Stator Terminal  
+
Rotor Terminal  
Land Pattern/Mounting Holes  
c
A Type  
B Type  
+±  
+±  
8.±  
- ±.5  
7.±  
- ±.5  
4.±±±.2  
2.4±±.2  
(in mm)  
(in mm)  
E Type  
+±  
8.±  
- ±.5  
4.2±±.2  
7
3.2±±.2 ꢀia.  
(in mm)  
Temperature Characteristics  
c
TZB4Z060  
TZB4Z100  
Z±6± (NP±±2±±ppmꢁ/C)  
Z1±± (NP±±3±±ppmꢁ/C)  
+1±  
+8  
+6  
+4  
+2  
+1±  
+8  
+6  
+4  
+2  
+2±  
+55  
+55  
+85  
Temp. (/C)  
+2±  
+85  
±
–2  
±
–2  
–25  
Temp. (/C)  
–25  
±
±
–4  
–6  
–4  
–6  
–8  
–8  
–1±  
–1±  
Continueꢀ on the following page.  
28  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Continued from the preceding page.  
Temperature Characteristics  
c
TZB4R200  
TZB4R500  
R200 (N750±400ppmꢀ/Cꢁ  
R500 (N750±±00ppmꢀ/Cꢁ  
+10  
+8  
+6  
+4  
+2  
+10  
+8  
+6  
+4  
+2  
+20  
+85  
+55  
+20  
+55  
+85  
Temp.(/Cꢁ  
0
–2  
0
–2  
Temp. (/Cꢁ  
0
–25  
0
–25  
–4  
–6  
–4  
–6  
–8  
–8  
–10  
–10  
Frequency Characteristics  
c
TZB4Z060  
TZB4Z100  
Z060  
Z100  
1000  
1000  
1000  
1000  
100  
Q
100  
100  
100  
Q
10  
10  
10  
10  
1
1
100 200 ±00 400 500 600 700 800 900 1000  
Frequency (MHzꢁ  
100 200 ±00 400 500 600 700 800 900 1000  
Frequency (MHzꢁ  
TZB4R200  
TZB4R500  
R500  
R200  
1000  
7
1000  
1000  
1000  
100  
100  
100  
100  
Q
Q
10  
10  
10  
10  
1
1
100  
200  
±00  
400  
500  
600  
100  
200  
±00  
400  
500  
Frequency (MHzꢁ  
Frequency (MHzꢁ  
29  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Temperature Profile  
c
Flow Soldering Profile  
Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu), Eutectic solder (63Sn/37Pb)  
T3  
T2  
Standard Profile  
Heating  
t2  
Limit Profile  
Pre-heating  
Cycle  
T1  
of reflow  
Standard Profile  
Temp. (T1)  
Time (t1)  
Temp. (T2)  
Time (t2)  
150°C  
60 to 120sec.  
250°C  
5sec. max.  
1 time  
t1  
time (s)  
Limit Profile  
Pre-heating  
Heating  
s )MMERSE THE BODY IN SOLDER BATHꢀ AVAILABLE FOR COVER FILM TYPEꢁ  
Cycle  
of reflow  
Temp. (T1)  
Time (t1)  
Temp. (T3)  
Time (t2)  
150°C  
60 to 120sec.  
265 3°C  
5sec. max.  
2 times  
Reflow Soldering Profile  
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)  
wSoldering profile for Eutectic solder (63Sn/37Pb)  
(Limit profile: refer to q)  
T5  
T3  
T4  
T2  
T3  
T2  
T1  
t2  
t2  
t3  
Limit Profile  
T1  
Standard Profile  
Standard Profile  
t1  
time (s)  
t1  
time (s)  
Standard Profile  
Heating  
Standard Profile  
Heating  
Peak  
temperature  
(T3)  
Peak  
temperature  
(T3)  
Pre-heating  
Pre-heating  
Cycle  
Cycle  
of reflow  
of reflow  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
150 to 180°C 60 to 120sec. 220°C  
Temp. (T1) Time (t1) Temp. (T2) Time (t2)  
30 to 60sec. 245 3°C  
2 times  
150°C 60 to 120sec. 183°C  
30sec. 230 +5/-0°C 1 time  
Limit Profile  
Heating  
Peak  
temperature  
(T5)  
Pre-heating  
Cycle  
of reflow  
Temp. (T1) Time (t1) Temp. (T4) Time (t3)  
150 to 180°C 60 to 120sec. 230°C  
30 to 50sec. 260 +5/-0°C 2 times  
s !VAILABLE FOR TERMINAL SHAPE !ꢀ "ꢀ AND %ꢁ  
Soldering Iron  
Standard Profile  
Temperature of soldering iron tip  
Soldering time  
Soldering iron power output  
Cycle of soldering iron  
7
350 10°C  
3sec. max.  
30W max.  
1 time  
Notice (Storage and Operating Conditions)  
c
1. Do not use the trimmer capacitor under atmosphere  
of RTV silicone rubber (Room Temperature  
Vulcanizing Silicone Rubber) except Acetone  
liberating silicone sealant.  
6. Do not use the trimmer capacitor under the  
conditions listed below.  
(1) Corrosive gasses atmosphere  
(ex. Chlorine gas, Hydrogen sulfide gas,  
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,  
etc.)  
2. Before using trimmer capacitors, please store under  
the conditions of -10 to +40°C and 30 to 85%RH.  
3. Do not store in or near corrosive gasses.  
4. Use within 6 months of delivery.  
(2) In liquid (ex. water, oil, medical liquid,  
organic solvent, etc.)  
5. Do not store under direct sunlight.  
(3) Dusty / dirty atmosphere  
(4) Direct sunlight  
(5) Static voltage or electric/magnetic fields  
(6) Direct sea breeze  
(7) Other variations of the above  
30  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Notice (Soldering and Mounting)  
c
1. Soldering  
(7) Do not use water-soluble flux (for water  
cleaning). To prevent the deterioration of  
trimmer capacitor characteristics, apply flux  
only to terminals.  
(1) Can be soldered by reflow soldering method, flow  
soldering method, and soldering iron.  
(2) Soldering conditions  
Refer to the temperature profile.  
2. Mounting  
If the soldering conditions are not suitable, e.g.,  
excessive time and/or excessive temperature, the  
trimmer capacitor may deviate from the specified  
characteristics.  
(1) Do not apply excessive force (preferably 5.0N  
[Ref: 500gf] max.), when the trimmer capacitor  
is mounted on the PCB.  
(2) Do not warp and/or bend PCB to protect trimmer  
capacitor from breakage.  
(3) The amount of solder is critical.  
(4) The thickness of solder paste should be printed  
from 150 micro m to 200 micro m and the dimension  
of land pattern should be Murata's standard land  
pattern used at reflow soldering. Insufficient  
amounts of solder can lead to insufficient  
soldering strength on PCB. Excessive amounts of  
solder may cause bridging between the terminals  
or contact failure due to flux wicking up.  
(5) When using soldering iron, the string solder  
shall be applied to the lower part of the  
terminal only. Do not apply flux except to the  
terminals. Excessive amounts of solder and/or  
applying solder to the upper part of the  
terminal may cause fixed rotor or contact failure  
due to flux invasion into the movable part and/or  
the contact point. The soldering iron should not  
come in contact with the plastic case of the  
trimmer capacitor. If such contact does occur,  
the trimmer capacitor may be damaged.  
(6) Our recommended chlorine content of solder is  
as follows.  
(3) When bending the terminals, do not apply  
excessive force to the body of the product to  
protect the terminal fixing part from damage.  
(4) Use a pick-up nozzle of a suitable dimension.  
> Without cover film type  
- External dimensions of 4.5x4.0mm and  
2.5mm bore diameter.  
> With cover film type  
- 4.0mm external diameter and 2.0mm bore  
diameter.  
3. Cleaning [with cover film type]  
Isopropyl alcohol and ethyl alcohol are available  
material for cleaning. If you use any other type of  
solvent, please evaluate performance in your  
application. Moreover, please confirm that no  
damage has occurred to the trimmer capacitor  
after cleaning in your conditions.  
4. Other  
Note the polarity of the trimmer capacitor to  
minimize influence by stray capacitance.  
(Refer to the dimensions concerning the polarity.)  
(a) Solder paste: 0.2wt% max.  
(b) String solder: 0.5wt% max.  
Notice (Handling)  
c
1. Use suitable screwdrivers that fit comfortably in  
3. Do not apply adhesive, lock paints, or any other  
substances to the trimmer capacitor to secure the  
rotor position. They may cause corrosion or  
electrical contact problems.  
driver slot.  
7
(1) Recommended screwdriver for manual adjustment  
MURATA: KMDR010  
(2) Recommended screwdriver bit for automatic  
adjustment  
4. Do not break the cover film before the completion  
of PCB mounting, soldering, and cleaning.  
5. Do not clean the trimmer capacitor after the cover  
film has been broken.  
MURATA: KMBT010  
2. When adjusting with a screwdriver, do not apply  
excessive force (preferably 1.0 N [Ref: 100gf] max.)  
to minimize capacitance drift. Excessive force applied  
to the screwdriver slot may cause deformation of the  
products.  
6. To break the cover film, first turn the screwdriver  
more than 360°, and set the capacitance value.  
(Inserting the screwdriver only will not break the  
cover film.)  
Notice (Other)  
c
Before using trimmer capacitors, please test after  
assembly in your particular mass production system.  
31  
• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.  
• This catalog has only tyꢀical sꢀecifications. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.  
!Note  
T13E.ꢀdf  
Aug.10,2012  
Ceramic Trimmer Capacitors  
TZ03 Series  
2.5±±.2ꢀ di.ꢀ  
Features  
c
±.5±±.2ꢀꢁDeptꢀ±.5ꢀꢂdꢃ.ꢀ  
1. °olor coded case facilitates identification of  
caꢀacitance range.  
2. Sealed construction ꢀrevents the ꢀenetration of  
flux and dust.  
6
3. Available in two adjustpent styles: Toꢀ/Rear.  
4. °ross-shaꢀed (+) slot enables autopatic adjustpent.  
Applications  
1. °ar audio systeps  
c
1.±±±.1ꢀ  
1.±±±.1ꢀ  
F Type  
6.6  
TolDriꢃcD:ꢀ±±.5  
dꢃꢀꢂꢂ  
2. °ar clocks  
3. Stereos  
4. Radio cassette taꢀe recorders  
5. °ordless teleꢀhones  
6. Video gapes  
2.5±±.2ꢀ di.ꢀ  
±.5±±.2ꢀꢁDeptꢀ±.5ꢀꢂdꢃ.  
7. °opꢀact radio equiꢀpent  
8. Repote keyless entry systeps  
9. Burglarꢀroof devices  
6.±  
7.8  
6.4  
1.2±±.1  
1.±±±.1  
3.±  
3.4  
N Type  
TolDriꢃcD:ꢀ±±.5  
dꢃꢀꢂꢂ  
C min. (max.)  
(pF)  
C max.  
(pF)  
Part Number  
TZ03Z2R3 169  
TC  
Q
Rated Voltage Withstanding Voltage Stator/Case Color  
p
1.25  
1.5  
2.0  
2.7  
4.2  
5.2  
6.8  
9.8  
6.0  
9.0  
10.0  
2.3 +50/-0%  
5.0 +50/-0%  
7.0 +50/-0%  
10.0 +50/-0%  
20.0 +50/-0%  
30.0 +50/-0%  
NP0 200ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.  
NP0 200ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.  
NP0 200ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.  
NP0 200ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.  
N750 300ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.  
N750 300ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.  
100Vdc  
100Vdc  
100Vdc  
100Vdc  
100Vdc  
100Vdc  
100Vdc  
100Vdc  
50Vdc  
220Vdc  
220Vdc  
220Vdc  
220Vdc  
220Vdc  
220Vdc  
220Vdc  
220Vdc  
110Vdc  
110Vdc  
110Vdc  
Black  
Blue  
TZ03Z050 169  
p
TZ03Z070 169  
p
Blue  
TZ03Z100 169  
p
Blue  
TZ03R200 169  
p
Red  
TZ03R300 169  
p
Green  
Yellow  
Brown  
Orange  
Black+Dot  
Black  
TZ03P450 169  
p
45.0 +50/-0% N1200 500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.  
60.0 +50/-0% N1200 500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.  
TZ03P600 169  
p
TZ03Z500 169  
p
50.0 +100/-0%  
NP0 300ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.  
TZ03R900 169  
p
90.0 +100/-0% N750 300ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.  
120.0 +100/-0% N750 300ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.  
50Vdc  
8
TZ03R121 169  
p
50Vdc  
Insulation Resistance: 10000M ohp  
Torque: 2.0 to 14.7pNp  
Oꢀerating Tepꢀerature Range: -25 to +85ꢁ°  
A blank colupn is filled with terpinal tyꢀe codes.  
32  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Construction  
c
Mounting Holes  
c
F Type  
N Type  
ꢀ3ꢀ di.  
1.1±±.1  
3
3.3  
5
Tolerince:ꢀ±±.5  
dnꢀmm  
Tolerince:ꢀ±±.5ꢀ  
(
)
dnꢀmm  
Temperature Characteristics  
c
TZ03Z070  
TZ03R200  
Z±7±ꢀ(NP±±2±±ppmꢁ°C)  
R2±±ꢀ(N75±±3±±ppmꢁ°C)  
+6  
+6  
+4  
+2  
+4  
+2  
85  
55  
55  
85  
2±  
2±  
±
–25  
±
Temp.ꢀ(°C)  
±
±
–2  
–25  
–2  
–4  
–6  
Temp.ꢀ(°C)  
–4  
–6  
TZ03P600  
TZ03Z500  
8
P6±±ꢀ(N12±±±5±±ppmꢁ°C)  
+8  
Z5±±ꢀ(NP±±3±±ppmꢁ°C)  
+8  
+6  
+4  
+6  
+4  
+2  
+2  
55  
2±  
85  
2±  
55  
85  
±
±
–2  
±
±
–25  
–25  
Temp.ꢀ(°C)  
Temp.ꢀ(°C)  
–2  
–4  
–4  
–6  
–6  
–8  
–8  
–1±  
–1±  
Contdnue ꢀonꢀtheꢀfollowdngꢀpige.  
33  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Continued from the preceding page.  
Temperature Characteristics  
c
TZ03R121  
R121 (N750±±00ppmꢀ°C)  
+8  
+6  
+4  
+2  
55  
85  
20  
0
–2  
–25  
0
Temp. (°C)  
–4  
–6  
–8  
–10  
Frequency Characteristics  
c
TZ03Z070  
TZ03R200  
R200  
Z070  
1000  
100  
10  
1000  
100  
10  
1000  
1000  
100  
100  
Q
Q
10  
10  
1
100 200 ±00 400 500 600 700 800 900 1000  
Frequency (MHz)  
1
100  
200  
±00  
400  
500  
Frequency (MHz)  
TZ03P450  
TZ03P600  
P600  
P450  
1000  
1000  
1000  
100  
10  
1000  
100  
100  
100  
Q
Q
8
10  
10  
10  
1
100  
200  
±00  
400  
500  
1
100  
200  
±00  
400  
500  
Frequency (MHz)  
Frequency (MHz)  
Continued on the following page.  
34  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Continued from the preceding page.  
Frequency Characteristics  
c
TZ03R900  
R900  
1000  
1000  
100  
10  
100  
Q
10  
1
100  
200  
300  
400  
500  
Frequency (MHz)  
Temperature Profile  
c
Flow Soldering Profile  
Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu), Eutectic solder (63Sn/37Pb)  
T3  
T2  
Standard Profile  
Heating  
t2  
Limit Profile  
Pre-heating  
Cycle  
Heating  
T1  
of reflow  
Standard Profile  
Temp. (T1)  
Time (t1)  
Temp. (T2)  
Time (t2)  
150°C  
60 to 120sec.  
250°C  
5sec. max.  
1 time  
t1  
time (s)  
Pre-heating  
Limit Profile  
Pre-heating  
Heating  
Cycle  
of reflow  
Temp. (T1)  
Time (t1)  
Temp. (T3)  
Time (t2)  
150°C  
60 to 120sec.  
265 3°C  
5sec. max.  
2 times  
Soldering Iron  
Standard Profile  
Temperature of soldering iron tip  
Soldering time  
Soldering iron power output  
Cycle of soldering iron  
350 10°C  
3sec. max.  
30W max.  
1 time  
Notice (Storage and Operating Conditions)  
c
1. Do not use the trimmer capacitor under atmosphere  
of RTV silicone rubber (Room Temperature  
Vulcanizing Silicone Rubber) except Acetone  
liberating silicone sealant.  
8. Do not use the trimmer capacitor under the  
conditions listed below.  
(1) Corrosive gasses atmosphere  
(ex. Chlorine gas, Hydrogen sulfide gas,  
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,  
etc.)  
8
2. Before using trimmer capacitors, please store under  
the conditions of -10 to +40°C and 30 to 85%RH.  
3. Do not store in or near corrosive gasses.  
4. Use within 6 months of delivery.  
(2) In liquid (ex. water, oil, medical liquid,  
organic solvent, etc.)  
5. Open the package just before using.  
6. Prior to storing previously opened packages, the  
packaging should be heat-sealed. Avoid using  
rubber bands for repackaging.  
(3) Dusty / dirty atmosphere  
(4) Direct sunlight  
(5) Static voltage or electric/magnetic fields  
(6) Direct sea breeze  
7. Do not store under direct sunlight.  
(7) Other variations of the above  
35  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Notice (Soldering and Mounting)  
c
1. Soldering  
2. Mounting  
(1) TZ03 series can be soldered by flow soldering  
method and soldering iron. Do not use reflow  
soldering method.  
(1) Do not apply excessive force (preferably 5.0 N  
[Ref: 500gf] max.), when the trimmer capacitor  
is mounted on the PCB.  
(2) Soldering conditions  
(2) Use the suitable PCB holes that are the same  
pitch as the terminal of the trimmer capacitor.  
If it does not fit the terminal, excessive stress  
may be applied to the terminal and the trimmer  
capacitor may deviate from the specified  
characteristics.  
Refer to the temperature profile.  
If the soldering conditions are not suitable, e.g.,  
excessive time and/or excessive temperature,  
the trimmer capacitor may deviate from the  
specified characteristics.  
(3) The dimension of mounting hole should be Murata's  
standard mounting hole used at flow soldering.  
The amount of solder is critical. Insufficient  
amounts of solder can lead to insufficient  
soldering strength on PCB. Excessive amounts of  
solder may cause bridging between the terminals  
or contact failure due to flux wicking up.  
(4) When using soldering iron, the string solder  
shall be applied to the lower part of the  
terminal only. Do not apply flux except to the  
terminals. Excessive amounts of solder and/or  
applying solder to the upper part of the  
terminal may cause fixed rotor or the contact  
failure due to flux invasion into the movable  
part and/or the contact point. The soldering  
iron should not come in contact with the plastic  
case of the trimmer capacitor. If such contact  
does occur, the trimmer capacitor may be damaged.  
(5) Our recommended chlorine content of string  
solder is 0.5wt% max.  
(3) Do not apply bending stress more than 10.0N  
(Ref: 1kgf) after the trimmer capacitor has  
been mounted on the PCB.  
(4) Mount trimmer capacitor in contact with PCB.  
(5) When bending the terminals, do not apply  
excessive force to the body of the product to  
protect the terminal fixing part from damage.  
3. Cleaning  
Isopropyl alcohol and ethyl alcohol are available  
material for cleaning. If you use any other type  
of solvents, please evaluate performance in  
your application. Moreover, please confirm that  
no damage has occurred to the trimmer capacitor  
after cleaning in your conditions.  
4. Other  
Note the polarity of the trimmer capacitor to  
minimize influence by stray capacitance.  
(Refer to the dimensions concerning the polarity.)  
(6) Do not use water-soluble flux (for water cleaning).  
To prevent the deterioration of trimmer  
capacitor characteristics, apply flux only to  
terminals.  
Notice (Handling)  
c
1. Use suitable screwdrivers that fit comfortably in  
3. Do not apply adhesive, lock paints, or any other  
substances to the trimmer capacitor to secure the  
rotor position. They may cause corrosion or  
electrical contact problems.  
driver slot.  
(1) Recommended screwdriver for manual adjustment  
MURATA: KMDR010  
(2) Recommended screwdriver bit for automatic  
adjustment  
MURATA: KMBT010  
8
2. When adjusting with a screwdriver, do not apply  
excessive force (preferably 1.0 N [Ref: 100gf] max.)  
to minimize capacitance drift. Excessive force applied  
to the screwdriver slot may cause deformation of the  
products.  
Notice (Other)  
c
Before using trimmer capacitors, please test after  
assembly in your particular mass production system.  
36  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Packaging  
Minimum Quantity  
c
Minimum Quantity (pcs.)  
Part Number  
ø180mm Reel  
3000  
3000  
2000  
2000  
1000  
500  
ø330mm Reel  
Bulk  
-
500  
500  
500  
500  
500  
100  
500  
1000  
TZR1  
TZS2  
TZY2  
TZV2  
TZC3  
TZW4  
TZB4  
TZ03  
-
-
-
-
-
2500  
-
500  
-
Tape Dimensions  
c
TZR1 Series  
TZS2 Series  
2.0 0.1  
4.0 0.1  
2.0 0.1  
4.0 0.1  
1.05 0.2  
0.25 0.1  
1.25 0.2  
0.25 0.1  
4.0 0.1  
4.0 0.1  
+0.1  
1.5 -0 dia.  
+0.1  
-0  
1.5  
dia.  
1.8 0.2  
2.5 0.2  
(in mm)  
(in mm)  
TZY2/TZV2 Series  
TZC3 Series  
+0.1  
1.5  
A
dia.  
+0.1  
– 0  
– 0  
1.5  
dia.  
2.0  
4.0  
t
2.0 0.2  
0.3  
0.25  
2
4
A
A-Across  
section  
A
A-Across  
section  
A
3.6 0.2  
8
2.7 0.2  
t=TZY2 (TZVY2) : 1.6 0.2  
TZV2 (TZV02) : 1.9 0.2  
4.0  
Tolerance : 0.1  
in mm  
Tolerance: 0.1  
in mm  
TZW4 Series  
TZB4 Series  
+0.1  
1.5  
dia.  
– 0  
+0.1  
1.5  
dia.  
3.55 0.2  
2.6  
– 0  
2.0  
8.0  
4 .0  
0.3 0.1  
2
4
0.3  
A
A
A
A-Across  
section  
4.6  
8
1.8  
4.3  
A-Across  
section  
A
Direction of feed  
Tolerance: 0.1  
in mm  
Tolerance: 0.1  
in mm  
Continued on the following page.  
37  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Packaging  
Continued from the preceding page.  
Reel Dimensions (180mm diameter)  
c
TZR1/TZS2/TZY2/TZV2 Series  
TZC3/TZW4/TZB4 Series  
13.0 0.ꢀ dia.  
13.0 0.ꢀ dia.  
21.0 0.ꢁ dia.  
2.0 0.ꢀ  
2.0 0.ꢀ  
21.0 0.ꢁ dia.  
9.0 1.0  
13.0 1.0  
17.0 1.0  
13.0 1.0  
17ꢁ 2 dia.  
17ꢁ 2 dia.  
(in mm)  
(in mm)  
Reel Dimensions (330mm diameter)  
c
TZB4 Series  
13.0 0.ꢀ dia.  
2.0 0.ꢀ  
21.0 0.ꢁ dia.  
13.ꢀ 1.0  
17.ꢀ 1.0  
32ꢁ 2 dia.  
(in mm)  
38  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Recommended Adjustment Tools  
Please use the following recommended screwdrivers.  
You can order these drivers using the part numbers below.  
Although you can also adjust the capacitance value using commercial products, please use one with the same head size as the  
driver listed below.  
c For Manual Adjustment  
MURATA  
Model Number  
Manufacturer’s  
Model Number  
Series  
Shape  
80  
1.5  
MURATA MFG.  
TZR1  
TZS2  
TZY2  
TZV2  
KMDR160  
KMDR050  
KMDR060  
KMDR020  
KMDR010  
KMDR130  
KMDR160  
Bit shape:  
Minus (0.3x0.13)  
80  
(in mm)  
(in mm)  
(in mm)  
(in mm)  
(in mm)  
1.5  
MURATA MFG.  
KMDR050  
Bit shape: Square (0.54x0.54)  
108  
18  
ENGINEER INC.  
DA-89  
Bit shape: Minus (0.8x0.35)  
125  
15  
9000  
VESSEL MFG.  
0.9-30  
NO.9000 -0.9g30  
Bit shape: Minus (0.9x0.4)  
122  
50  
20  
TZC3  
TZB4  
TZ03  
MURATA MFG.  
KMDR010  
Bit shape: Minus (2.2x0.4)  
125  
15  
VESSEL MFG.  
CERAMIC BLADE  
ELECTRONICS  
9000  
1.3-30  
TZW4  
NO.9000 -1.3g30  
Bit shape: Minus (1.3x30)  
(in mm)  
Continued on the following page.  
39  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Recommended Adjustment Tools  
Continued from the preceding page.  
c For Automatic Adjustment  
MURATA  
Model Number  
Manufacturer’s  
Model Number  
Series  
Shape  
20  
2
MURATA MFG.  
TZS2  
TZY2  
TZV2  
KMBT050  
KMBT060  
KMBT020  
KMBT010  
KMBT050  
Bit shape: Square (0.54x0.54)  
(in mm)  
25  
0.6  
MURATA MFG.  
KMBT060  
Bit shape: Minus (0.56x0.25)  
(in mm)  
(in mm)  
(in mm)  
25  
0.6  
MURATA MFG.  
KMBT020  
Bit shape: Minus (0.9x0.4)  
30  
TZC3  
TZB4  
TZ03  
MURATA MFG.  
KMBT010  
Bit shape: Minus (2.2x0.4)  
40  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
!Note  
T13E.pdf  
Aug.10,2012  
Qualified Standards  
The products listed herein have been produced  
by a QS9000 and ISO9001 certified factory  
MURATA FACTORY  
Sabae Murata Mfg. Co., Ltd.  
∗ No ODCs (Ozone Depleting Chemicals) are used on  
any Murata trimmer potentiometers.  
41  
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.  
!Note  
T13E.pdf  
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.  
Aug.10,2012  

相关型号：

KMBT060

 Ceramic Trimmer Capacitors
MURATA

KMBT2222A

 NPN Switching Transistor
KEXIN

KMBT2222A

 High current, Low voltage
TYSEMI

KMBT2907

 PNP General Purpose Amplifier
KEXIN

KMBT2907

 Collector Current to Continuous :IC -600mA
TYSEMI

KMBT3904

 NPN Transistors
KEXIN

KMBT3904

 Epitaxial planar die construction
TYSEMI

KMBT3906

 PNP Transistors
KEXIN

KMBT3906

 Epitaxial planar die construction
TYSEMI

KMBT5401

 PNP Transistors
KEXIN

KMBT5401

 Pb-Free Packages are Available
TYSEMI

KMBT5551

 NPN Transistors
KEXIN
©2020 ICPDF网 联系我们和版权申明