PBSS2540M [NEXPERIA]
40 V, 0.5 A NPN low VCEsat (BISS) transistorProduction;型号: | PBSS2540M |
厂家: | Nexperia |
描述: | 40 V, 0.5 A NPN low VCEsat (BISS) transistorProduction |
文件: | 总10页 (文件大小:177K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PBSS2540M
40 V, 0.5 A NPN low VCEsat (BISS) transistor
22 February 2018
Product data sheet
1. General description
Low VCEsat NPN transistor in a SOT883 leadless ultra small plastic package.
PNP complement: PBSS3540M.
2. Features and benefits
•
Low collector-emitter saturation voltage VCEsat
•
•
•
•
High collector current capability IC and ICM
High efficiency leading to reduced heat generation
Reduced printed-circuit board requirements.
AEC-Q101 qualified
3. Applications
•
Power management:
•
•
•
•
DC-DC converter
Supply line switching
Battery charger
LCD backlighting.
•
Peripheral driver:
•
•
Driver in low supply voltage applications (e.g. lamps and LEDs).
Inductive load drivers (e.g. relays, buzzers and motors).
4. Quick reference data
Table 1. Quick reference data
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VCEO
collector-emitter
voltage
open base
-
-
40
V
IC
collector current
[1] [2]
-
-
500
1
mA
A
ICM
peak collector current single pulse; tp ≤ 1 ms
-
-
hFE
RCEsat
DC current gain
VCE = 2 V; IC = 10 mA; Tamb = 25 °C
200
-
-
-
collector-emitter
saturation resistance
IC = 500 mA; IB = 50 mA; tp ≤ 300 µs;
pulsed; δ ≤ 0.02 ; Tamb = 25 °C
380
500
mΩ
[1] Device mounted on an FR4 Printed-Circuit Board, (PCB), single-sided copper, tinplated, standard footprint, with 60 μm copper strip
line.
[2] Refer to SOT883 standard mounting conditions.
Nexperia
PBSS2540M
40 V, 0.5 A NPN low VCEsat (BISS) transistor
5. Pinning information
Table 2. Pinning information
Pin
1
Symbol Description
Simplified outline
Graphic symbol
B
E
C
base
C
1
2
3
2
emitter
collector
B
Transparent
top view
3
E
sym123
DFN1006-3 (SOT883)
6. Ordering information
Table 3. Ordering information
Type number
Package
Name
Description
Version
PBSS2540M
DFN1006-3
DFN1006-3: leadless ultra small plastic package; 3 solder lands SOT883
7. Marking
Table 4. Marking codes
Type number
Marking code
PBSS2540M
DC
©
PBSS2540M
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2018. All rights reserved
Product data sheet
22 February 2018
2 / 10
Nexperia
PBSS2540M
40 V, 0.5 A NPN low VCEsat (BISS) transistor
8. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
VCBO
VCEO
VEBO
IC
Parameter
Conditions
Min
Max
40
Unit
V
collector-base voltage
open emitter
-
collector-emitter voltage open base
-
40
V
emitter-base voltage
collector current
open collector
-
6
V
[1] [2]
-
500
1
mA
A
ICM
peak collector current
peak base current
total power dissipation
single pulse; tp ≤ 1 ms
Tamb ≤ 25 °C
-
IBM
-
100
250
430
150
150
150
mA
mW
mW
°C
°C
°C
Ptot
[1] [2]
[2] [3]
-
-
Tj
junction temperature
ambient temperature
storage temperature
-
Tamb
Tstg
-65
-65
[1] Device mounted on an FR4 Printed-Circuit Board, (PCB), single-sided copper, tinplated, standard footprint, with 60 μm copper strip
line.
[2] Refer to SOT883 standard mounting conditions.
[3] Device mounted on an FR4 PCB, single-sided copper, tinplated, mounting pad for collector 1 cm2.
9. Thermal characteristics
Table 6. Thermal characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
500
290
Unit
K/W
K/W
Rth(j-a)
thermal resistance
from junction to
ambient
in free air
[1] [2]
-
-
-
-
[2] [3]
[4]
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint, with 60 μm copper strip line.
[2] Refer to SOT883 standard mounting conditions.
[3] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 1 cm2.
[4] Operated under pulsed conditions: duty cycle δ ≤ 20%, pulse width tp ≤ 30 ms.
©
PBSS2540M
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2018. All rights reserved
Product data sheet
22 February 2018
3 / 10
Nexperia
PBSS2540M
40 V, 0.5 A NPN low VCEsat (BISS) transistor
10. Characteristics
Table 7. Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
100
50
Unit
nA
ICBO
collector-base cut-off
current
VCB = 30 V; IE = 0 A; Tamb = 25 °C
VCB = 30 V; IE = 0 A; Tj = 150 °C
VEB = 5 V; IC = 0 A; Tamb = 25 °C
-
-
-
-
-
-
µA
IEBO
hFE
emitter-base cut-off
current
100
nA
DC current gain
VCE = 2 V; IC = 10 mA; Tamb = 25 °C
200
150
-
-
-
-
VCE = 2 V; IC = 100 mA; tp ≤ 300 µs;
pulsed; δ ≤ 0.02 ; Tamb = 25 °C
VCE = 2 V; IC = 500 mA; tp ≤ 300 µs;
pulsed; δ ≤ 0.02 ; Tamb = 25 °C
50
-
-
VCEsat
collector-emitter
saturation voltage
IC = 10 mA; IB = 0.5 mA; Tamb = 25 °C
IC = 100 mA; IB = 5 mA; Tamb = 25 °C
IC = 200 mA; IB = 10 mA; Tamb = 25 °C
-
-
-
-
-
-
50
mV
mV
mV
mV
mΩ
-
100
200
250
500
-
IC = 500 mA; IB = 50 mA; tp ≤ 300 µs;
pulsed; δ ≤ 0.02 ; Tamb = 25 °C
-
RCEsat
VBEsat
VBEon
fT
collector-emitter
saturation resistance
380
base-emitter saturation
voltage
-
-
1.2
1.1
-
V
base-emitter turn-on
voltage
VCE = 2 V; IC = 100 mA; Tamb = 25 °C
-
-
V
transition frequency
VCE = 5 V; IC = 100 mA; f = 100 MHz;
Tamb = 25 °C
250
-
450
-
MHz
pF
Cc
collector capacitance
VCB = 10 V; IE = 0 A; ie = 0 A;
f = 1 MHz; Tamb = 25 °C
6
©
PBSS2540M
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2018. All rights reserved
Product data sheet
22 February 2018
4 / 10
Nexperia
PBSS2540M
40 V, 0.5 A NPN low VCEsat (BISS) transistor
mhc082
mhc085
1200
1200
V
(mV)
BE
h
FE
1000
1000
(1)
800
(1)
(2)
800
600
(2)
(3)
600
400
200
0
400
200
(3)
- 1
2
3
- 1
10
2
3
10
1
10
10
10
1
10
10
10
I
(mA)
I (mA)
C
C
VCE = 2 V
VCE = 2 V
(1) Tamb = 150 °C
(2) Tamb = 25 °C
(3) Tamb = -55 °C
(1) Tamb = -55 °C
(2) Tamb = 25 °C
(3) Tamb = 150 °C
Fig. 1. DC current gain as a function of collector
current; typical values
Fig. 2. Base-emitter voltage as a function of collector
current; typical values
mhc086
mhc084
3
10
1200
V
BEsat
(mV)
V
CEsat
(mV)
1000
(1)
(2)
800
600
2
10
(1)
(3)
(2)
(3)
400
200
10
- 1
10
2
3
- 1
10
2
3
1
10
10
10
1
10
10
10
I
(mA)
C
I
(mA)
C
IC/IB = 20
IC/IB = 20
(1) Tamb = 150 °C
(2) Tamb = 25 °C
(3) Tamb = -55 °C
(1) Tamb = 150 °C
(2) Tamb = 25 °C
(3) Tamb = -55 °C
Fig. 3. Collector-emitter saturation voltage as a
function of collector current; typical values
Fig. 4. Base-emitter saturation voltage as a function of
collector current; typical values
©
PBSS2540M
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2018. All rights reserved
Product data sheet
22 February 2018
5 / 10
Nexperia
PBSS2540M
40 V, 0.5 A NPN low VCEsat (BISS) transistor
mhc083
mhc087
3
10
1200
I
C
R
CEsat
(Ω)
(mA)
(1)
1000
(2)
(4)
(3)
(5)
2
10
(6)
(8)
800
600
400
200
0
(7)
(9)
10
(10)
(1)
(2)
(3)
1
- 1
10
10
- 1
2
3
1
10
10
10
0
1
2
3
4
5
I
C
(mA)
V
(V)
CE
Tamb = 25 °C
IC/IB = 20
(1) IB = 25 mA
(2) IB = 22.5 mA
(3) IB = 20 mA
(4) IB = 17.5 mA
(5) IB = 15 mA
(6) IB = 12.5 mA
(7) IB = 10 mA
(8) IB = 7.5 mA
(9) IB = 5 mA
(1) Tamb = 150 °C
(2) Tamb = 25 °C
(3) Tamb = -55 °C
Fig. 6. Collector-emitter saturation resistance as a
function of collector current; typical values
(10) IB = 2.5 mA
Fig. 5. Collector current as a function of collector-
emitter voltage; typical values
11. Package outline
0.62
0.55
0.50
0.46
0.55
0.47
3
0.30
0.22
1.02
0.95
0.65
0.30
0.22
2
1
0.20
0.12
0.35
Dimensions in mm
03-04-03
Fig. 7. Package outline DFN1006-3 (SOT883)
©
PBSS2540M
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2018. All rights reserved
Product data sheet
22 February 2018
6 / 10
Nexperia
PBSS2540M
40 V, 0.5 A NPN low VCEsat (BISS) transistor
12. Soldering
1.3
0.7
R0.05 (12×)
solder lands
solder resist
0.9
0.7
0.6
solder paste
occupied area
0.25
(2×)
0.3
(2×)
0.3
0.4
Dimensions in mm
0.4
(2×)
sot883_fr
Fig. 8. Reflow soldering footprint for DFN1006-3 (SOT883)
©
PBSS2540M
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2018. All rights reserved
Product data sheet
22 February 2018
7 / 10
Nexperia
PBSS2540M
40 V, 0.5 A NPN low VCEsat (BISS) transistor
13. Revision history
Table 8. Revision history
Data sheet ID
Release date
20180222
Data sheet status
Change
notice
Supersedes
PBSS2540M v.2
Modifications:
Product data sheet
-
PBSS2540M v.1
•
•
The format of this data sheet has been redesigned to comply with the identity guidelines
of Nexperia.
Legal texts have been adapted to the new company name where appropriate.
PBSS2540M v.1
20030722
Product data sheet
-
-
©
PBSS2540M
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2018. All rights reserved
Product data sheet
22 February 2018
8 / 10
Nexperia
PBSS2540M
40 V, 0.5 A NPN low VCEsat (BISS) transistor
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
14. Legal information
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Data sheet status
Suitability for use in automotive applications — This Nexperia product
has been qualified for use in automotive applications. Unless otherwise
agreed in writing, the product is not designed, authorized or warranted to
be suitable for use in life support, life-critical or safety-critical systems or
equipment, nor in applications where failure or malfunction of an Nexperia
product can reasonably be expected to result in personal injury, death or
severe property or environmental damage. Nexperia and its suppliers accept
no liability for inclusion and/or use of Nexperia products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
Document
status [1][2] status [3]
Product
Definition
Objective
[short] data
sheet
Development This document contains data from
the objective specification for product
development.
Preliminary
[short] data
sheet
Qualification This document contains data from the
preliminary specification.
Product
[short] data
sheet
Production
This document contains the product
specification.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
[1] Please consult the most recently issued document before initiating or
completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the Internet at URL http://www.nexperia.com.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Definitions
Preview — The document is a preview version only. The document is still
subject to formal approval, which may result in modifications or additions.
Nexperia does not give any representations or warranties as to the accuracy
or completeness of information included herein and shall have no liability for
the consequences of use of such information.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Disclaimers
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’ aggregate and cumulative liability towards customer
©
PBSS2540M
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2018. All rights reserved
Product data sheet
22 February 2018
9 / 10
Nexperia
PBSS2540M
40 V, 0.5 A NPN low VCEsat (BISS) transistor
15. Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Applications.................................................................. 1
4. Quick reference data....................................................1
5. Pinning information......................................................2
6. Ordering information....................................................2
7. Marking..........................................................................2
8. Limiting values............................................................. 3
9. Thermal characteristics............................................... 3
10. Characteristics............................................................4
11. Package outline.......................................................... 6
12. Soldering..................................................................... 7
13. Revision history..........................................................8
14. Legal information....................................................... 9
© Nexperia B.V. 2018. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 22 February 2018
©
PBSS2540M
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2018. All rights reserved
Product data sheet
22 February 2018
10 / 10
相关型号:
©2020 ICPDF网 联系我们和版权申明