USB-9221 [NI]
Portable USB-Based DAQ for High Voltages; 基于USB的便携式数据采集的高电压型号: | USB-9221 |
厂家: | National Instruments |
描述: | Portable USB-Based DAQ for High Voltages |
文件: | 总2页 (文件大小:179K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Portable USB-Based DAQ
for High Voltages
NI USB-9221 NEW!
• Small, portable device
(12.1 by 8.± by 2.5 cm)
• 8 analog inputs at 12-bit resolution
• ±±6 V input range
Operating Systems
• Windows 2666/XP
Recommended Software
• LabVIEW
• LabWindows/CVI
• Measurement Studio
• 866 kS/s aggregate sampling rate
• Built-in, removable connectors
for easier and more cost-
effective connectivity
• 256 Vrms channel-to-earth
ground isolation
• Plug-and-play connectivity
via USB
• Bus-powered
Measurement Services
Software (included)
• NI-DAQmx driver software
• VI Logger Lite data-logging
software
Maximum Sampling Rate
Product
USB-9221
Signal Type
Voltage
Channels (SE)
Input Resolution (bits)
(kS/s)
Input Range (V)
Connector
Driver Software1
8
12
800
±±0
Screw Terminal, D-Sub
NI-DAQmx
1For up-to-date information on NI-DAQ, visit ni.com/support/daq/versions.htm.
Table 1. Portable USB DAQ for High Voltages Selection Guide
Hardware Description
Common Applications
National Instruments USB-9221 is a data acquisition module with The USB-9221 is ideal for high-voltage applications where small size
integrated signal conditioning that provides plug-and-play and portability are essential, such as:
connectivity via USB for faster setup and measurements. This • Portable data logging – log voltage data quickly and easily
module has eight single-ended analog input channels with an • Academic lab use – obtain academic discounts for quantities
extended input range of ±±6 V for direct connection to industrial
sensors. With a maximum single-channel sampling rate of 866 kS/s, • Industrial testing – take measurements of high-voltage
the NI USB-9221 is the fastest device in the USB DAQ with transformers, batteries, and other electronics
of five or more. Visit ni.com/academic for details.
signal conditioning family. In addition, this module includes • Embedded OEM applications
channel-to-earth ground isolation for safety, noise immunity and • In-vehicle data acquisition
high common-mode voltage range. With both screw-terminal and
standard D-Sub connector options for this module, you can obtain Information for OEM Customers
flexible and low-cost signal wiring.
For information on special configurations and pricing, please
visit ni.com/oem.
Software Description
The USB-9221 uses NI-DAQmx high-performance, multithreaded
driver software for interactive configuration and data acquisition on
Windows OSs. Use NI-DAQmx to test channels, generate code, and
apply custom scaling to any of your measurements. All NI data
acquisition devices shipped with NI-DAQmx also include VI Logger
Lite configuration-based data-logging software.
Ordering Information
NI USB-9221
Screw Terminals ........................................................779439-61
D-Sub Connector......................................................779446-61
Accessories
NI 9934 ......................................................................779164-61
Recommended Accessories
The USB-9221 has built-in screw terminals or a D-Sub connector
option that connects to the NI 9934 strain relief accessory, or any
other standard 25-pin D-Sub connector.
BUY NOW!
For complete product specifications, pricing, and accessory
information, call (800) 813 3693 (U.S. only) or go to ni.com/oem.
NI Services and Support
NI has the services and support to meet your
needs around the globe and through the
application life cycle – from planning
and development through deployment
Local Sales and Technical Support
In offices worldwide, our staff is local to the country, giving you
access to engineers who speak your language. NI delivers industry-
leading technical support through online knowledge bases, our
applications engineers, and access to 14,666 measurement and
automation professionals within NI Developer Exchange forums.
Find immediate answers to your questions at ni.com/support.
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of
technical support. Visit ni.com/ssp.
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
Visit ni.com/services.
SERVICE
NEEDS
Training and Certification
NI training is the fastest, most certain route to productivity with our Hardware Services
products. NI training can shorten your learning curve, save NI Factory Installation Services
development time, and reduce maintenance costs over the NI Factory Installation Services (FIS) is the fastest and easiest way to
application life cycle. We schedule instructor-led courses in cities use your PXI or PXI/SCXI combination systems right out of the box.
worldwide, or we can hold a course at your facility. We also offer a Trained NI technicians install the software and hardware and
professional certification program that identifies individuals who configure the system to your specifications. NI extends the standard
have high levels of skill and knowledge on using NI products. warranty by one year on hardware components (controllers, chassis,
Visit ni.com/training.
modules) purchased with FIS. To use FIS, simply configure your
system online with ni.com/pxiadvisor.
Professional Services
Our Professional Services Team is comprised of NI applications Calibration Services
engineers, NI Consulting Services, and a worldwide National Instruments NI recognizes the need to maintain properly calibrated devices for
Alliance Partner program of more than ±66 independent consultants high-accuracy measurements. We provide manual calibration
and integrators. Services procedures, services to recalibrate your products, and automated
range from start-up assistance calibration software specifically designed for use by metrology
to turnkey system integration. laboratories. Visit ni.com/calibration.
Visit ni.com/alliance.
Repair and Extended Warranty
OEM Support
NI provides complete repair services for our products. Express repair
We offer design-in consulting and product integration assistance and advance replacement services are also available. We offer
if you want to use our products for OEM applications. For extended warranties to help you meet project life-cycle requirements.
information about special pricing and services for OEM customers, Visit ni.com/services.
visit ni.com/oem.
ni.com • (800) 813 3693
National Instruments • info@ni.com
© 2005 National Instruments Corporation. All rights reserved. CVI, LabVIEW, Measurement Studio, National Instruments, National Instruments Alliance Partner,
NI, ni.com, NI-DAQ, and SCXI are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective
companies. A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.
相关型号:
USB-9237
Strain- and Bridge-Based MeasurementsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NI
USB-9421
Portable USB-Based High-Voltage Digital I/OWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NI
USB-9472
Portable USB-Based High-Voltage Digital I/OWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NI
USB-9481
Portable USB-Based High-Voltage Digital I/OWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
NI
USB-9AB-080-28N-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-080-28S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-130-26S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-200-24S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-300-22N-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-300-22S-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AB-500-20N-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
USB-9AO-080-28N-MO1
Interconnection DeviceWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ITT
©2020 ICPDF网 联系我们和版权申明