NJT8306UN [NJRC]

Double Balanced Mixer, 13750MHz Min, 14500MHz Max,;
NJT8306UN
型号: NJT8306UN
厂家: NEW JAPAN RADIO    NEW JAPAN RADIO
描述:

Double Balanced Mixer, 13750MHz Min, 14500MHz Max,

局域网 射频 微波
文件: 总10页 (文件大小:1294K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Released  
Ku-band 6W BUC  
RF Frequency:  
13.75 to 14.5 GHz and 14.0 to 14.5 GHz  
Model No. NJT8306 series  
RF Frequency  
LO Frequency  
IF Frequency  
:
:
:
14.0 to 14.5 GHz / 13.75 to 14.5 GHz  
13.05 GHz / 12.80 GHz  
950 to 1,450 MHz / 950 to 1,700 MHz  
Output Power @ 1dB G.C.P. :  
+37.8 dBm (6W)  
IF / Ref. (10MHz) Input :  
N-type / F-type, Female Connector  
IF Connector  
DC Power Input :  
Specifications  
Rev.01 December 10, 2014  
Copyright 2014  
New Japan Radio Co., Ltd.  
Microwave Components Division  
-Notice of Proprietary Information-  
This documents and its contents are proprietary to New Japan Radio Co., Ltd.  
This publication and its contents may not be reproduced or distributed for any  
other purpose without the written permission of New Japan Radio Co., Ltd.  
1
Rev.01_Dec.10,2014_NJT8306  
Caution  
1. NJRC strives to produce reliable and high quality microwave components. NJRC's microwave  
components are intended for specific applications and require proper maintenance and handling.  
To enhance the performance and service of NJRC's microwave components, the devices,  
machinery or equipment into which they are integrated should undergo preventative  
maintenance and inspection at regularly scheduled intervals. Failure to properly maintain  
equipment and machinery incorporating these products can result in catastrophic system  
failures.  
2. To ensure the highest levels of reliability, NJRC products must always be properly handled. The  
introduction of external contaminants (e.g. dust, oil or cosmetics) can result in failures of  
microwave components.  
3. NJRC offers a variety of microwave components intended for particular applications. It is  
important that you select the proper component for your intended application. You may contact  
NJRC's sales office or sales representatives, if you are uncertain about the products listed in the  
catalog and the specification sheets.  
4. Special care is required in designing devices, machinery or equipment, which demand high levels  
of reliability. This is particularly important when designing critical components or systems whose  
foreseeable failure can result in situations that could adversely affect health or safety. In  
designing such critical devices, equipment or machinery, careful consideration should be given  
to, amongst other things, their safety design, fail-safe design, back-up and redundancy systems,  
and diffusion design.  
5. The products listed in the catalog and specification sheets may not be appropriate for use in  
certain equipment where reliability is critical or where the products may be subjected to extreme  
conditions. You should consult our sales office or sales representatives before using the products  
in any of the following types of equipment.  
* Aerospace Equipment  
* Equipment Used in the Deep Sea  
* Power Generator Control Equipment (nuclear, steam, hydraulic)  
* Life Maintenance Medical Equipment  
* Fire Alarm/Intruder Detector  
* Vehicle Control Equipment (automobile, airplane, railroad, ship, etc.)  
* Various Safety Equipment  
6. NJRC's products have been designed and tested to function within controlled environmental  
conditions. Do not use products under conditions that deviate from methods or applications  
specified in the catalog and specification sheets. Failure to employ NJRC's products in the proper  
applications can lead to deterioration, destruction or failure of the products. NJRC shall not be  
responsible for any bodily injury, fires or accidents, property damage or any consequential  
damages resulting from the misuse or misapplication of its products. PRODUCTS ARE SOLD  
WITHOUT WARRANTY OF ANY OF KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT  
LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE.  
7. The product specifications and descriptions listed in the catalog and specification sheets are  
subject to change at any time, without notice.  
* Above Specifications are subject to change without notice.  
2
Rev.01_Dec.10,2014_NJT8306  
Model Number  
Numbering System  
Line-up  
* Above Specifications are subject to change without notice.  
3
Rev.01_Dec.10,2014_NJT8306  
1. Electrical Specifications  
1-1.  
1-2.  
1-3.  
Output Frequency Range  
<Universal Ku-band>  
<Standard Ku-band>  
Input Frequency Range  
<Universal Ku-band>  
<Standard Ku-band>  
Maximum IF Input Level  
(without damage)  
13.75 to 14.5 GHz  
14.0 to 14.5 GHz  
950 to 1,700 MHz  
950 to 1,450 MHz  
+13 dBm max.  
1-4.  
1-5.  
Conversion Type  
L.O. Frequency  
Single, fixed L.O.  
<Universal Ku-band>  
<Standard Ku-band>  
Frequency Sense  
Output Power @ 1dB G.C.P. (P1dB)  
Linear Gain  
Gain Variation over frequency  
@ fixed temperature  
<Universal Ku-band>  
12.80 GHz  
13.05 GHz  
Positive  
+37.8 dBm min. over temperature  
62 dB nom., 56 dB min.  
1-6.  
1-7.  
1-8.  
1-9.  
5 dBp-p max. over 750 MHz  
2 dBp-p max. over 54 MHz  
5 dBp-p max. over 500 MHz  
2 dBp-p max. over 54 MHz  
4 dBp-p max.  
<Standard Ku-band>  
1-10. Gain Stability over temperature  
@ fixed frequency  
2 dBp-p typ.  
1-11. ACPR  
-30 dBc typ., -24 dBc min.  
@ Pout = +37.8 dBm  
1-12. Requirement for External Reference  
[Frequency] 10 MHz (sine-wave)  
[Input Power] -5 to +5 dBm @ Input port  
[Phase Noise] -125 dBc/Hz max. @ 100 Hz  
-135 dBc/Hz max. @ 1 kHz  
-140 dBc/Hz max. @ 10 kHz  
1-13. L.O. Phase Noise  
-60 dBc/Hz max. @ 100 Hz  
-70 dBc/Hz max. @ 1 kHz  
-80 dBc/Hz max. @ 10 kHz  
-90 dBc/Hz max. @ 100 kHz  
-100 dBc/Hz max. @ 1MHz  
1-14. Spurious @ P1dB Output  
[in band] -50 dBc max. @ RF Frequency  
[in receive band] -70 dBm max. @ 10.95 to 12.75 GHz  
[Out-of-band] -50 dBc max.  
1-15. Receive Band Noise Density  
<Universal Ku-band>  
Tx: 14.0 to 14.5 GHz  
-156 dBm/Hz max. @10.95 to 12.75 GHz  
Tx: 13.75 to 14.0 GHz  
-156 dBm/Hz max. @10.95 to 12.25 GHz  
-125 dBm/Hz max. @12.25 to 12.75 GHz  
Tx: 14.0 to 14.5GHz  
<Standard Ku-band>  
-156 dBm/Hz max. @ 10.95 to 12.75 GHz  
* Above Specifications are subject to change without notice.  
4
Rev.01_Dec.10,2014_NJT8306  
1-16. Noise Figure  
23 dB max.  
1-17. Input Impedance  
<N-type Model>  
<F-type Model>  
1-18. Input V.S.W.R.  
1-19. Output Load V.S.W.R.  
50 ohms nom.  
75 ohms nom.  
2 : 1 max.  
[Recommendation] 1.3 : 1 max.  
[Non Damage] 3 : 1 max.  
1-20. DC Power Requirement  
[Voltage Range] +24 VDC (+12 to +30 VDC)  
[Power Consumption] 35 W typ. @ No IF signal  
40 W typ., 48 W max. @ Pout = +37.8 dBm  
3 W max. @ 10 MHz reference off (Mute on)  
Shut off the HPA in case of L.O. unlocked or  
no 10 MHz reference signal.  
1-21. Mute  
1-22. LED Indicator  
GREEN: L.O. locked  
RED: L.O. unlocked  
(or no 10 MHz reference signal)  
2. Mechanical Specifications  
2-1. Input Interface  
<N-type Model>  
<F-type Model>  
2-2. Output Interface  
2-3. Dimension & Housing  
IF / Ref. / DC Input:  
N-type female connector, 50 ohms  
F-type female connector, 75 ohms  
Waveguide, WR-75 (with Groove)  
174.9 (L) × 84 (W) × 59.2 (H) mm  
[6.89” (L) x 3.31” (W) x 2.33” (H)]  
without interface connectors and screws  
1.2 kg max.  
2-4. Weight  
[2.6 lbs max.]  
3. Environmental Specifications  
3-1. Temperature Range (ambient)  
[Operating] Operation Guarantee: -40 to +65 ºC  
Performance Guarantee: -40 to +60 ºC  
[Storage] -40 to +75 ºC  
3-2 Humidity  
3-3. Altitude  
3-4. Vibration  
0 to 100 %  
15,000 feet (4,572 m)  
5 G [49.03 m/s2] (3 axis, 50 Hz to 2 kHz)  
1 mm p-p (3 axis, 5 to 50 Hz)  
30 G [294.20 m/s2] (3 axis)  
3-5. Shock  
3-6 Waterproof / Dustproof (IP Code)  
3-7. Regulations  
IP 67 *1  
EU Directive (CE Marking)  
EMC (2004/108/EC)  
RoHS (2011/65/EU)  
Safety: EN60950-1  
3-8. Comply with RoHS (Restricting the use of Hazardous Substances) directives  
*1: Conditioned on connection with waveguide.  
* Above Specifications are subject to change without notice.  
5
Rev.01_Dec.10,2014_NJT8306  
4. Outline Drawing  
N-type Model  
Caution: DO NOT remove the sealing tape on the waveguide. If the sealing tape is removed, it may  
lose the performance of waterproof.  
* Above Specifications are subject to change without notice.  
6
Rev.01_Dec.10,2014_NJT8306  
F-type Model  
Caution: DO NOT remove the sealing tape on the waveguide. If the sealing tape is removed, it may  
lose the performance of waterproof.  
* Above Specifications are subject to change without notice.  
7
Rev.01_Dec.10,2014_NJT8306  
5. Label  
Product Label  
Definition of Serial Number  
* Above Specifications are subject to change without notice.  
8
Rev.01_Dec.10,2014_NJT8306  
6. Package  
Individual Package  
* Above Specifications are subject to change without notice.  
9
Rev.01_Dec.10,2014_NJT8306  
Shipping Package  
* Above Specifications are subject to change without notice.  
10  
Rev.01_Dec.10,2014_NJT8306  

相关型号:

NJT8318FRA

RF/Microwave Up/Down Converter,
NJRC

NJT8319FRA

RF/Microwave Up/Down Converter,
NJRC
NJRC

NJU#6435DFG1

Interface Circuit
NJRC

NJU#6435EFG1

Interface Circuit
NJRC

NJU#6435FFG1

Interface Circuit
NJRC

NJU#7380E-TE1

Micro Peripheral IC,
NJRC

NJU#7380E-TE2

Micro Peripheral IC,
NJRC

NJU#7706F04A2-TE2

Power Management Circuit,
NJRC

NJU#7706F06A2-TE2

Power Management Circuit,
NJRC

NJU#7706F18A2-TE1

Power Management Circuit,
NJRC

NJU#7706F18A2-TE2

Power Management Circuit,
NJRC