NSVS1154 [NJRC]

SAW Filter, 1 Function(s), 315MHz,;
NSVS1154
型号: NSVS1154
厂家: NEW JAPAN RADIO    NEW JAPAN RADIO
描述:

SAW Filter, 1 Function(s), 315MHz,

LTE
文件: 总4页 (文件大小:169K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
NSVS1154 Apr. 2013  
NewJRC SAW FILTER  
NSVS1154  
Application  
315MHz R.K.E.  
Electrical Specification: (Table 1)  
The device characteristics are measured in the circuit shown in Fig.1.  
Table 1. Electrical Specifications  
Item  
Spec.  
50Ω  
Typ.  
-
Input and Output Impedance  
Nominal Center Frequency (f0)  
315MHz  
3.0dB max.  
1.5dB max.  
2.5 max.  
50dB min.  
40dB min.  
-
Insertion Loss  
314.5~315.5MHz  
2.0dB  
0.8dB  
1.8  
Response Variation  
Input and Output VSWR  
Out of Band Rejection  
(Relative to Through Level)  
314.5~315.5MHz  
314.5~315.5MHz  
293.6 MHz  
60dB  
45dB  
336.4 MHz  
(Operating Temperature Range: -40~+85ºC)  
Maximum Rating: (Table 2)  
Table 2. Maximum Ratings  
Item  
Rating  
Maximum Input Power  
Maximum DC Voltage  
Operating Temperature Range  
Storage Temperature  
+20dBm  
7.5V  
-40~+85ºC  
-45~+90ºC  
Mechanical Specifications: (Fig.2)  
Package is designed as small as 3.0x3.0x1.15[mm3] for SMD (Surface Mount Device) type.  
Notice:  
This part is electrostatic discharge sensitive and may be damaged by improper handling.  
http://www.njr.co.jp/products/device/index.html  
http://www.njr.com/products/device/index.html  
(Japanese)  
(English)  
NSVS1154 Apr. 2013  
IN  
OUT  
1
6
50Ω  
50Ω  
2 SAW5  
3
4
Fig.1 Measuring circuit  
(b)  
(a)  
3. 0±0. 15  
420  
(c)  
(1)  
WN  
(2)  
Marking  
(1) Lot Number  
(a) Year  
(b) Month  
*Oct.---  
X
Y
Z
(0. 6)  
Nov.---  
Dec.---  
4
5
3
(c) Date  
1-9---  
0
1
2
10-19---  
20-31---  
2
1
(2) Part Number Mark  
(1. 80)  
Pin no.  
Connection  
GND  
6
1
2
3
4
5
6
(0. 75)  
[4x]  
(0. 45)  
IN/OUT  
GND  
GND  
Fig.2 Package dimensions (in mm)  
3.8  
OUT/IN  
GND  
2.2  
1.15  
1.15  
Fig.3 Desirable land area (in mm)  
NSVS1154 Apr. 2013  
Notice  
1. Use this component within operating temperature range. It might not be  
satisfied with electrical specification without operating temperature range.  
When it is used less than -40ºC or more than +85ºC, it might be a cause of  
degradation or destruction of the component. Even if it endures during a short  
time, it causes degradation of qualification.  
2. When soldering iron is used, solder with the temperature at the tip of soldering  
iron: 350ºC max., the time of soldering: 10 seconds max., the power of  
soldering iron: 30W max..  
3. Notice that the allowed time of soldering with soldering iron is accumulated  
time, when soldering is repeated.  
4. As rapid temperature change for cleaning after reflow soldering might be a  
cause of destruction clean this component after confirming that temperature of  
this component goes down to room temperature.  
5. Confirm that there are not any influence for qualification to this component in  
mounting on PCB when this component is cleaned.  
6. As it might be a cause of degradation of destruction to apply static electricity to  
this component, do not apply static electricity or excessive voltage while  
assembling and measuring. And do not transport this component with bare  
hand.  
7. As it might be a cause of degradation or destruction to apply D.C. voltage  
between each terminal, apply D.C. voltage 7.5V max. in actual circuit.  
Note  
1. This specification specifies the quality of this component as a single unit. Make  
sure that this component is evaluated and confirmed against this specification  
when it is mounted to your products.  
2. The information contained herein may be changed without prior notice. It is  
therefore advisable to contact New Japan Radio Company before proceeding  
with the design of equipment incorporating this product.  
3. The products are designed to be used with ordinary electronic equipment (data  
and communications equipment, office equipment, audio-video equipment,  
measuring instruments, etc). New Japan Radio Company does not assume any  
liability for the case using the products with the application required high  
reliability or safety extremely (such as space equipment, sea-bottom equipment,  
medical equipment etc). When intending to use any our product please  
contact our sales representatives in advance.  
NSVS1154 Apr. 2013  
FREQUENCY CHARACTERISTICS  
S21  
0
0
20  
40  
60  
80  
100  
2
4
6
8
10  
CH1 : center 315 span 100  
CH2 : center 315 span 100  
S11  
S22  
S22  
S11  
11  
9
11  
9
7
7
5
5
3
3
1
1
265  
365  
265  
365  
Frequency [MHz]  
Frequency [MHz]  
S21  
0
20  
40  
60  
80  
100  
0.3  
3000  
Frequency [MHz]  

相关型号:

NSVS1174

SAW Filter, 1 Function(s), 1575.42MHz, SMALL, SMD, 6 PIN
NJRC

NSVS1196

1-Port Saw Resonator, 433.92MHz Nom, SMALL, SMD, 6 PIN
NJRC

NSVS1252

SAW Filter, 1 Function(s), 433.92MHz, SMALL, SMD, 6 PIN
NJRC

NSVS40300CTWG

Small Signal Bipolar Transistor
ONSEMI

NSVS50030SB3T1G

双极晶体管,-50 V,-3 A,低饱和压,PNP,单
ONSEMI

NSVS50031SB3T1G

双极晶体管,50V,3A,低饱和压,NPN 单
ONSEMI

NSVS612

SAW Filter, 1 Function(s), 421.9MHz,
NJRC

NSVS613

SAW Filter, 1 Function(s), 426MHz,
NJRC

NSVS614

429.42 MHZ SPECIFIED LOW POWER RADIO STATION
NJRC

NSVS616

SAW Filter, 1 Function(s), 440MHz, SMALL, SMD, 8 PIN
NJRC

NSVS658

JRC SAW FILTER
NJRC

NSVS670

420MHz Low-Loss Type
NJRC