FB15ANP4-HB [NKK]
.5 Amp Momentary Pushbuttons; 0.5安培瞬时按钮开关
| 型号： | FB15ANP4-HB |
| 厂家： | 
NIHON KAIHEIKI INDUSTRY CO. LTD. |
| 描述： | .5 Amp Momentary Pushbuttons |
| 文件： | 总4页 (文件大小：100K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
.5 Amp Momentary Pushbuttons Series FB
Distinctive Characteristics
Optional caps in different colors to vary appearance
as needed.
Low operating force for ease of actuation.
Rear panel bushing mount with compact
behind panel dimension.
Internal antijamming feature to protect the
contacts from damage due to excessive
force on the plunger.
Self-cleaning contacts make FB models highly
reliable.
Low cost device of rugged one-piece bushing
and housing construction.
Reliability of construction with an internal guide to
maintain contact alignment.
Epoxy sealed terminals.
Actual Size
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
.5 Amp Momentary Pushbuttons Series FB
General Specifications
FB Series
Electrical Capacity (Resistive Load)
Power Level: 500mA @ 125V AC for silver
Logic Level: 0.4VA max. @ 28V AC/DC max. for gold
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation in Supplement section.
Other Ratings
Contact Resistance: 30 milliohms maximum for silver;
30 milliohms maximum for gold
Insulation Resistance: 100 megohms minimum @ 500V DC
Dielectric Strength: 1,000V AC minimum between contacts & between contacts & case for 1 minute minimum
Mechanical Life: 50,000 operations minimum
Electrical Life: 50,000 operations minimum
Nominal Operating Force: 2.16N
Travel: Pretravel .043” (1.1mm)
Overtravel .022” (0.57mm)
Total Travel .065” (1.67mm)
Materials & Finishes
Plunger: Polyacetal
Bushing: Brass with nickel plating
Case: Phenolic resin
Movable Contactor: Copper with silver or gold plating
Stationary Contacts: Phosphor bronze with silver or gold plating
Terminals: Phosphor bronze with silver or gold plating
Environmental & Installation Data
Operating Temp Range: –10°C through +70°C (+14°F through +158°F)
Soldering Time & Manual Soldering:
Temperature: See Profile A in Supplement section.
Standards & Certifications
UL Recognized: Models rated 0.5A @ 125V AC Single pole; Momentary action circuit with solder lug terminations.
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch.
C-UL Recognized: Models rated 0.5A @ 125V AC Single pole; Momentary action circuit with solder lug terminations.
R
C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
.5 Amp Momentary Pushbuttons Series FB
TYPICAL SWITCH ORDERING EXAMPLE
FB 15AN EP 2
F A
POLE & CIRCUIT
15AN SPST OFF (ON)
( ) = Momentary
CONTACT MATERIALS & RATINGS
CAP COLORS
Silver Contacts
A
B
Black
White
Red
2
4
500mA @ 125V AC
Gold Contacts
C
0.4VA max. @ 28V AC/DC max.
TERMINALS
IMPORTANT:
CAPS
Switches are supplied without UL
& C-UL markings unless specified.
Specific models & ratings noted
on General Specifications page.
EP Epoxy Sealed PC/Turret
F
.201” (5.1mm) Dia.
.295” (7.5mm) Dia.
P
No Epoxy PC/Turret
H
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
FB15ANEP2-FA
.201” (5.1mm) Diameter
Black Cap
Silver Contacts &
500-Milliamp Rating
SPST OFF-(ON) Circuit
Epoxy Sealed
PC/Turret Terminals
POLE & CIRCUIT
Plunger Position
( ) = Momentary
Connected Terminals
Throw & Switch Schematics
Normal
Down
Normal
Down
Note: Terminal numbers are
not actually on the switch.
Pole
Model
SP
FB15AN
OFF
(ON)
OPEN
1-2
SPST
1
2
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
.5 Amp Momentary Pushbuttons Series FB
TERMINALS
Epoxy Sealed
PC/Turret Terminals
No Epoxy
P
EP
PC/Turret Terminals
CONTACT MATERIALS & RATINGS
2
4
Silver Contacts
Gold Contacts
Power Level
Logic Level
500mA @ 125V AC
0.4VA maximum @ 28V AC/DC maximum
Complete explanation of operating range in Supplement section.
TYPICAL SWITCH DIMENSIONS
PC/Turret
(1.2)
.047
(0.15) Typ
.006
(4.0)
.157
(5.1) Dia
.201
M5 P0.5
(5.0) Dia
.197
(2.8) Dia
.110
(5.0)
.197
(2.7)
.106
(2.54)
.100
(5.9) (4.0)
.232 .157
(11.8)
.465
(7.0) Dia
.276
FB15ANEP2-FA
Plunger is white polyacetal.
SLIP-ON CAPS & COLORS
AT475
.201” (5.1mm) Diameter
AT496
.295” (7.5mm) Diameter
F
H
(7.5) Dia
.295
(5.1) Dia
.201
(4.0)
.157
(4.0)
.157
(5.9)
.232
(5.9)
.232
Material: Polyamide
Material: Polyamide
Finish: Glossy
Finish: Glossy
A
B
C
Colors Available:
Black
White
Red
STANDARD HARDWARE & PANEL CUTOUT
M5 P0.5
(5.3) Dia
.209
(7.0)
.276
AT536 Hex Nut
Panel Thickness:
Material:
.110” (2.8mm) maximum
Brass with nickel plating
(1.2)
.047
(8.0)
.315
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
相关型号：
FB15R06W1E3
EasyPIM module with Trench/Fieldstopp IGBT3 and Emitter Controlled 3 diode and NTC
INFINEON
FB160
Silicon Avalanche Diodes - Axial Leaded Telecommunications Transient Voltage Suppressors
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明